Used Wv Dmv for sale (181)

Condition: used, axle configuration: 2 axles, first registration: 05/1999, wheelbase: 730 mm, Year of construction: 1999, Unladen weight: 420 kg Payload: 1,580 kg Gross vehicle weight: 2,000 kg Damage: none Hfedpfsy Rua Hsx Ab Njg Registration number: WV-35-ST

Condition: good (used), Karl Schnell FD3 Process Automat Cutter-Mixer-Emulsifier Hedpfx Ajxnkcieb Nsfg This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – Space-saving by compact design, – Complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, – Stable end product with reproducible quality by fully automatic process control, – The possibility for direct and indirect heating and cooling, – The possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarse grained small pieces. In short: Time and cost saving with improved product quality. Manufacturer: Karl Schnell Model: FD 3 Hole Plate: 175 mm Batch Capacity: 310 liter Drive Emulsifier: 18/37 kW Pre-mincing motor: 15/30 kW Agitator motor: 0,7 kW Revolution agitator: 13,3 min-1 Drive infeed screw: 1,5 kW Machine Dimensions LxWxH: 2.250x1.800x2.100 mm Machine Weight: 3.000 kg.

Condition: used, Year of construction: 1994, material width 2000 mm coil weight 35,0 t material thickness 0,6 - 2,5 mm coil internal diameter - 610 mm coil external diameter 900 - 1900 mm material cross-cut 1600 x 2,5 mm² no. of straightening rolls 13 straightening roll diameter 50 mm speed 0 - 60 m/min power requirement 81,0 + kW weight of straightening machine 14,5 t coil line consisting of: - decoiler make Schleicher, Type HE - 355 - 2100, yom 1994 Hsdpfxoy Rutys Ab Nsfg with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, Type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, Type WV-SYS-A 160-2000, yom 1994

Condition: used, Year of construction: 1990, pressure 50 t distance between columns 800 mm stroke 4 - 60 mm Hfodpfx Abjvut Huo Nsg no. of strokes 30 - 300 Hub/min dayligth (stroke and adjustment up) 400 mm column travel -side 350 mm table surface area 780 x 640 mm hole in the table 690 x 140 mm table height over floor 1150 mm ram surface 800 x 460 mm power requirement 26,0 kW weight of the machine ca. 9,00 t required space 2,4 x 1,7 x 2,9 m ram adjustment 80 mm with infinitely variable drive, automatic stroke adjustment electronic roll feed (PBK, WV 65-DSM 300P, yom. 2007)

Condition: like new (used), Year of construction: 2021, Inotec I175-IT5-110D Emulsfier Inotec emulsifiers used for the production of fine minces in the meat industry and for the production of fine emulsions of meat, vegetables and fruits. Manufacturer: Inotec Model: I175-iT5-110D-FU-SP Hjdpfxey Hqnlj Ab Nofg Year: 2021 Power: 206A / 128kW Capacity: Up to 7.000 kg/h Hole plate diameter: 175 mm Hopper capacity: 200 liter Machine dimensions LxWxH: 1.920x1.150x1.480 mm Machine weight: 900 kg.

Condition: used, machine/vehicle number: XL9MZS2186D074117, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 11/2006, total length: 9,800 mm, total width: 2,600 mm, wheelbase: 1,810 mm, color: other, Year of construction: 2006, Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Empty weight: 6.420 kg Carrying capacity: 13.580 kg GVW: 20.000 kg Registration number: WV-JX-88 Hodpsyfgpnofx Ab Nefg

Condition: good (used), Year of construction: 2014, Maja ESB 4434/1 GV Skinning machine The Poultry Skinning Machine MAJA ESB 4434/1 GV is suitable for the safe automatic skinning of fresh poultry parts by infeed conveyor belt. It offers the following advantages: For perfect skinning of poultry parts with excellent yield. Hedpfsy Ed Txex Ab Nofg Versatile use, for removing the skin of different parts of chicken and turkey, coming either from dry or wet chilling. Gentle skinning process, without damages to the sensitive poultry meat and the skin for increased product quality. Maximum operator safety by automatic skinning through infeed conveyor belt MAJA Skinning Machine in accordance with current CE regulations.  Manufacturer: Maja Model ESB Year: 2014 Cutting width: 385 mm Power: 50Hz / 400V / 0,88kW Machine dimensions LxWxH: 1.800x750x1.250 mm Machine weight: 250 kg.

Condition: good (used), Koma Pigs stunning device Hfodpfjy Edvtox Ab Neg This device is suitable for the electrical stunning of animals. From 2019, Regulation (EC) No 1099/2009 of 24 September 2009 concerning the protection of animals at the time of killing applies. According to the new regulations, every animal slaughtering plant should record the stunting parameters. This device has a factory-installed recorder of the deafening parameters, which measures the deafening parameters during slaughter and records them on an SDHC memory card placed in the recorder's socket. The device with the recorder gives the possibility of remote assistance when setting the de-stunting parameters. The operation  is based on the principle of automatic measurement of the body resistance of the deafened piece. In the ready-to-run state, there is only a low safe measuring voltage of approx. 15 V at the open electrodes of the forceps. When the electrodes are pressed against the animal's body, the resistance is measured and a deafening voltage of < 400 V is automatically applied, which is automatically switched off when the deafening process is completed (i.e. the electrodes are opened). Two electrodes are applied to the animal's head, while the third electrode, using a pneumatic actuator, is applied to the area of the heart, causing it to stop temporarily, as a result of which the blood stops flowing and the number of congested muscles decreases. By stopping the heart with the third electrode, it is possible to significantly reduce the incidence of adverse factors affecting the quality of the meat.

Condition: excellent (used), Year of construction: 2000, Lima RM 700 DSP Separator Hodpjy D Nl Rjfx Ab Nsfg The DSP Deboner is specially developed to separate meat from hard bones as for instance from pork bones to obtain high quality structured meat at optimal yield and low calcium content. This advanced machine is designed for the food processing industry, ensuring efficient separation of meat from bones with maximum productivity. Manufacturer: Lima Model: RM 700 DSP Year: 2000 Capacity: Up to 4.000 kg/h Power supply: 400V / 50Hz / 3Ph Machine dimensions LxWxH: 2.400x950x1.800 mm Machine weight: 1.400 kg.

Condition: excellent (used), Year of construction: 2004, Sepamatic Sepa 2000 Separator SEPA 2000 separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Manufacturer: Sepamatic Model: Sepa 2000  Year: 2004 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Hfjdpfx Abjy D H U Aj Neg Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300×1.300×1.700 mm Machine Weight: 1.400 kg.

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Hedpfx Absy Dquyj Nefg Conveyor dimensions LxWxH: 2.500x900x2.100 mm Total weight: 3.300 kg.

Condition: excellent (used), Year of construction: 2014, Marel TBL 3000 Target Batcher Hfedpjy Au Iuefx Ab Njg Marel’s TargetBatcher has long been known for its accuracy and weighting for fixed-weight packaging. With 7 high accuracy static scales, with 14 buffer containers, TargetBatcher selects the best product combination in just a fraction of a second, making it much easier for processors to process multiple small product batches where a quick change from one product to another is crucial. TargetBatcher is present in plants around the world and is used for a variety of products e.g. mackerel, haddock fillets, tuna steaks, tiger prawns in shell, hake slices, squid, cuttlefish and other products. This compact, compact weight is available in two variants: fresh and frozen products and specially glazed products. TargetBatcher is an easy way to reduce raw material loss, mainly by combining the pre-determination of the number of frozen or fresh products that should be in a package of a certain weight. Optionally, you can use Marela software that tracks machine operation in real time. The information collected from TargetBatcher is a complete overview of the activities that are part of the weighing process. TargetBatcher is accurate and effectively reduces raw material losses. It is a stable device that you can rely on and doesn’t need too much maintenance and is also easy to use. Model: Marel TBL-3000 Year: 2014 Machine dimensions (LxWxH): 3.130x790x1.610 mm Machine weight: 330 kg. Power: 230/400V / 1kW / 50/60Hz Max. productdimensions (LxWxH): 280x170x120 mm Max. product weight: 3.000 g Capacity: 12-24 portion/min. Accurancy: 1g / 0,035 ounces

Condition: excellent (used), Year of construction: 2018, Marel 2730 salmon filleting machine with back and belly trim The Marel MS 2730 is an automated salmon filleting machine designed to maximize yield and throughput, capable of processing up to 25 fish per minute. It features automated size adjustments via a touch screen, includes advanced back and belly trimming, and is built for easy operation and hygiene. The machine accommodates salmon from 1.5 to 8 kg, with optional kits available for smaller fish, and is part of Marel's larger processing solutions. Key Features and Capabilities Automated Processing: The MS 2730 automatically adjusts to different fish sizes and uses electronically controlled tools to maintain high quality and consistent results. High Throughput: It can fillet up to 25 salmon per minute, increasing production efficiency. Improved Yield: The design includes a set of circular knives that capture meat near the center bone, significantly increasing fillet yield. User-Friendly Operation: A multilingual color touch screen provides easy and safe control over all operations, with pre-programmed settings for different fish sizes. Compact Design: The machine has a compact footprint, allowing for easier integration into existing processing lines. Technical Specifications Hsdpfxoy Aul Tj Ab Njfg Fish Size: Standard 1.5 to 8 kg, with a kit available for fish as small as 500 g. Water Consumption: Approximately 15 liters per minute. Power Requirements: Operates on 3 x 400V and requires a 3.3 kW power supply. Benefits for Processors Efficiency: Streamlines workflow with automated adjustments and high-speed processing. Quality & Yield: Produces high-quality fillets by including more meat and minimizing waste. Flexibility: Accommodates various fish sizes and is part of a larger, integrated system for comprehensive processing solutions. Cost-Effectiveness: Optimized water consumption reduces operating costs. The fish is fed into the machine belly down, which makes the infeed much easier and faster. An additional set of circular knives cuts the fish from vent to tail. This cut raises yield, as the meat close to the center bone is included in the fillets. For the belly bone cut, 4 sets of finger pressures secure maximum control of the fish and enable optimum cutting of both pre-rigor and post-rigor fillets. The result is high-quality fillets with higher yield and output. The MS 2730 automatically adjusts to various fish sizes, so there is no need to adjust once the program has been switched on. The MS2730 can process up to 25 fish per minute, depending on the length of the fish. With the built-in system for measuring the fish´s profile and size, the electronically controlled cutting tools can automatically adjust the filleting program to the fish´s size and shape. The result is higher throughput, quality and yield depending on trim specifications. With the optional small fish kit installed, the MS 2730 is capable of filleting fish weighing from 500 g up to 4 kg. Manufacturer: Marel Model: MS 2730 Year: 2018 Capacity: 25 fish per minute Fish size: 1,5-8 kg. Power Supply: 400/230V / 50 Hz Power: 5,5 kW Water consumption: 15 liter/min. Machine dimensions (LxWxH):  3.150x1.035x1.980 mm Machine weight: 1.000 kg.

Year of construction: 2005, condition: good (used), Multivac R140 Thermoformer Hsdpfxoyz Tg Tj Ab Nofg Multivac R140 thermoformer from 2005. High performance machine with compact dimensions so this machine can easily be fitted into (existing) production lines. Will be shipped with 1 tool, but we can arrange new tools for this R140 for very comparative prices. Tool 1×4: Packing Size 70×175 mm. Manufacturer:Multivac Model:R140 Year:2005 Power Supply:400/230V / 50 Hz Power:6 kW Machine dimensions (LxWxH): 4.200×1.000×1.800 mm Film width:360 mm Max. cut off length:195 mm Machine weight:1.000 kg.

Year of construction: 2014, condition: good (used), Multivac R145 Thermoformer The Multivac R145 Thermoformer is a versatile and efficient packaging machine, designed for high-speed and precision packaging in various industries such as food and medical sectors. Built in 2014, it offers advanced technology and customizable tooling to meet a wide range of packaging needs. Will be shipped with 1 tool, but we can arrange new tools for this R145 for very comparative prices. Tool 1x4: Packing Size 80x195 mm. Manufacturer:Multivac Model:R145 Hfodpfxjyz Shio Ab Nog Year:2014 Production hours: 2.451 Power Supply:400/230V / 50 Hz Power:12,5 kW Machine dimensions (LxWxH): 4.600x1.050x1.900 mm Film width: 360 mm Max. cut off length: 195 mm Vacuum Pump: Busch 250m3/h Machine weight: 1.000 kg.

Year of construction: 2021, condition: like new (used), Multivac T300 Traysealer In new condition Multivac T300 traysealer with only 535 productionhours. This Multivac T300 is an entry-level automatic traysealer with a lot of benefits. Thanks to it’s compact design this machine is perfect for many production facilities with little space. Work fully automatic, press start and the machine does the rest. The machine can be easily set-up by the large touch screen display. Build in Busch vacuum-pump 100m3/h delivers fast production cycles 24/7 Build in cooling-unit Machine will be shipped with 1 tool. The following tool sizes are available: If you need an other tool size we can deliver it for very comparative prices. Traysize 227 x 178 mm (2 tools in stock) Traysize 278 x 187 mm Traysize 208 x 160 mm (for SKIN-packaging) Traysize 265 x 160 mm (1/4 gastro) Traysize 164 x 123 mm (1/8 gastro) Hfedpfxoyx Dwwj Ab Nog MANUFACTURER Multivac MODEL T 300 TYPE automatic compact traysealer POWER SUPPLY 400/230 V POWER 5,5 kW EFFICIENCY 10 cycles per minute HEIGHT 170 cm WIDTH 110 cm LENGTH 260 cm WEIGHT 1100 kg YEAR 2021

Condition: good (used), Year of construction: 2011, Marelec Portio 1 Portion Cutter The fixed-weight portion cutter PORTIO 1 is used for portioning flat products such as chicken fillets, tenders, deboned thigh meat or salmon, with a vertical cut programmed to a fixed weight. This portioner for poultry is also used to cut to a programmed fixed thickness on more rounded poultry products. Key benefits Optimized yield Unparalleled accuracy Modular belt Upgradable to PORTIO 3 Adding options User-friendly software interface Hjdpfx Aeywgrueb Nsfg MATRIX P production reports Extremely hygienic, easy to clean Service Low noise Manufacturer:Marelec Model:Portio 1 Year:2011 Capacity:Max 17 cuts/sec. Cameras:1 Belt width:254 mm Max. product dimensions:940x240x150 mm Machine dimensions LxWxH:3.425x1.307x1.569 mm Machine weight:950 kg.

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. • Suitable for: High-precision stamping, blanking, washers, discs, continuous strip processing Additional equipment Hodpjx E Ea Hefx Ab Nofg • Manual decoiler • Servo roller feeder: G+K WVS/L 150 • Motorized recoiler

Condition: good (used), Year of construction: 2008, Formcook Combi 625 Contact Oven Hfjdpfx Asykn Hleb Nsg The Formcook Combi 625 is a dual-zone industrial cooking oven designed for high-capacity food production. It combines contact heat and hot air with steam injection, enabling flexible cooking of proteins and prepared meals. Built for durability and hygiene with stainless steel and silicone-coated rollers, this machine is your partner in high-throughput, consistent cooking. MANUFACTURER Formcook AB MODEL Combi 625 POWER SUPPLY 3 x 400 V, 90 A, 70 kW, 50 Hz DIMENSIONS 4,120 x 1,500 x 2,300 mm COOKING AREA 650 x 2,500 mm COOKING TIME RANGE 1 min 32 sec – 51 min HEATING METHOD Thermal oil plates (max 240°C) + Hot air with steam (max 280°C) STEAM PRESSURE Max. 7 Bar COMPRESSED AIR 6 bar, 100 l/min WATER SUPPLY 60–65°C, max. 30 l/min WEIGHT Approx. 2,500 kg CONVEYOR DIMENSIONS 9,900 x 650 mm YEAR OF PRODUCTION 2008

Condition: good (used), Year of construction: 2010, Sepamatic 2000 T Separator SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Hodpoyhmk Dsfx Ab Njfg Manufacturer: Sepamatic Model: Sepa 2000 T Year: 2010 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300x1.300x1.700 mm Machine Weight: 1.400 kg.

Year of construction: 2002, condition: ready for operation (used), Packing line includes (1) Carton Erector CARPENTIER HSA/ 60-1/ V3, speed: 30 cycle/ min, length: 2000mm, width: 1300mm, height: 2200mm, weight: 800kg (2) L-Sealer CARPENTIER WV-HM, formats: 100-360x80-200x20-80mm, weight: 1.5t, including webbing and conveyor belt. Hfjdpjgv I Anofx Ab Neg

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Hsdewqqv Depfx Ab Nefg

Year of construction: 2022, condition: ready for operation (used), Three burners are available. 1) Elco. 2) Seibold WV 500, year of construction: 2022, fuel: light oil EL, calorific value: approx. 10kWh/l, fuel flow rate: approx. 160l/h, nominal heat output: 1600kW, pilot burner fuel: propane, propane calorific value: approx. 26kWh/nm³, propane pre-pressure: 100mbar, max. chamber temperature: 270°C, max. chamber pressure: 3mbar. 3) Weishaupt, year of construction: 1999, output range: 474kW-2491kW. On-site inspection is possible. Hedpfswl I A Dsx Ab Nofg

Condition: good (used), Year of construction: 2012, Marel I-Cut 10 Portion Cutter The I-Cut 10 PortionCutter is an accurate and reliable portioning machine designed to give immediate results on your bottom line. With only a few touches to the control panel you can move away from inaccurate cutting by hand to accurate portions of boneless meat products – beef, pork and veal – on weight every time. Hsdpsyf Eqkefx Ab Nofg The I-Cut 10 enables you to make substantial savings on labour because of the speed and versatility of the machine. Improvements in yield will furthermore secure a very fast payback on your investment. The design of the machine makes it very easy to clean securing a high hygienic level and the small footprint means it will t into almost any plant layout. Technical data: Belt speed: 0,01 – 0,34 m/sec 10 cuts/s Belt width: 280 mm Belt length (in-feed/out-feed conveyor): 4025/2162 mm Temparature: 0-30 оC Water consumption: 0-2 l/min Voltage of power source: from 3 x 400 V to 3 x 480 V + PE Power consumption: 4 kW Frequency: 50/60 Hz Automatic circuit breakers residual current: Type B, 500 mА Dimensions (L x W x H): 2.700 x 980 x 1.560 mm Weight: approx. 360 kg Year: 2012

Year of construction: 2018, condition: excellent (used), Multivac G700 automatic traysealer The G700 is a very economical machine, which does not require cooling water and consumes only a minimal amount of compressed air. With its output of up to 18 cycles/minute for ‘Sealing only’ the G700 has a very competitive price/performance ratio. The G700 has been equipped with an intuitive user interface for a high degree of process reliability and a high level of ergonomic operating convenience. Options shipped with the machine - Multivac DP 200 Printer; - Multivac die changing trolley; - 3 Tools; - Manuals; - Spareparts; This Multivac G700 will be shipped with 3 tools; Tool 1:  Packingsize 190x95 mm; Tool 2: Packingsize 175x95 mm; Tool 3: See the photo's; Brand: Multivac Model: G700 Year: 2018 Productionhours: 5.516 Power Supply: 400/230 Volt Power: 4,7 kW Max. output in cycles/min: 18 Total machinedimensions (LxWxH): 680x100x215 cm Machine weight: 1.300 kg. Hsdpsyf Ef Ujfx Ab Nofg