Used Aeg Am 200 Lz2 for sale (22,408)

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: orange Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 100 mm for shelf distance: approx. 200 mm dim. head plates: 128 x 90 mm profile dim.: C 46 x 23 mm Weight: approx. 1,200 kg | pcs. Iedsi Hph Sspfx Anwjau General information about the article: This article is offered for pick-up only. Any additional transport or shipment of this article is associated with additional costs, which can be requested separately from us. depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: Iaedpok Iuhfsfx Anweu 01x shelf connector, used Material color: blue Manufacturer: Feralco for shelf distance: approx. 200 mm total length: approx. 200 mm profile dim.: approx. 20 x 20 mm head plate: approx. 100 x 40 x 4 mm Drill hole Ø: approx. 9 mm (2 pcs. per side) Weight: approx. 0,41 kg | pcs.

Condition: good (used), The scope of delivery includes: 01x U- collision protection corner, used Material color: orange total height: approx. 350 mm total width: approx. 200 mm inside width: approx. 160 mm Isdjk T Au Eopfx Anweau total depth: approx. 360 mm inside depth: approx. 240 mm leg dimension: approx. 140 x 140 mm foot plate dimension: approx. 340 x 200 x 8 mm material thickness: approx. 6,00 mm Drill hole Ø: approx. 16 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 14,850 Kg General information about the article: This article is offered for pickup only. Any further transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Technical data for the picking rack: Rack system: Dexion Type: HI280 Technical data for the installation: Number of rack rows: 01 pcs. Rack length: approx. 1,340 mm Number of bays per rack row: 01 pcs. at 1,290 mm Number of levels plus ground level: 06 pcs. Note: The advantage of a packing table or a picking rack is that all required tools and accessories needed for product assembly are always within easy reach. Scope of delivery includes: 02x uprights, used Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment pitch: 25 mm Incl. horizontal and diagonal braces Weight per piece: approx. 5.50 kg The uprights are pre-assembled Height: 1,200 mm Depth: 610 mm 06x shelves, used Material finish: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight per piece: approx. 4.37 kg Max. load per shelf with evenly distributed load: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material finish: Sendzimir galvanized 06x shelf beams, used Overall length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight per piece: approx. 0.84 kg Iajden Smvhjpfx Anwou Material finish: Sendzimir galvanized 48x storage bins, used Manufacturer: SSI Schäfer Bin designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight per piece: approx. 0.785 kg 01x load sign With information on bay and shelf loads, manufacturer and order number Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damage, corrosion or similar may be present. General product information: This item is offered for collection only. Any requested transport or shipment of this item is subject to additional charges, which can be quoted separately based on delivery location and scope.

Condition: new, Year of construction: 2026, The WP200 self-centring 3-jaw chuck is a professional accessory designed for use with welding positioners and welding rotators such as models PS310 and PS320. Its precise clamping mechanism allows quick, stable, and concentric fastening of pipes and cylindrical or hexagonal parts, significantly improving the efficiency and safety of circumferential welding. Main advantages of the WP200 chuck Self-centring 3-jaw mechanism – ensures even and stable clamping of workpieces regardless of their shape. Versatility – compatible with most welding rotators and welding positioners, including CORMAK PS310 and PS320. Clamping precision – perfect alignment of workpieces translates into better weld quality and smooth rotation. Durable construction – robust body made from high-strength materials resistant to heavy mechanical and thermal loads. Compact size and easy installation – low weight and precisely positioned mounting holes ensure quick integration with welding equipment. Design and technology The WP200 chuck features three high-quality jaws designed to automatically centre the workpiece on the rotational axis. Its outer diameter of 200 mm and inner diameter of 80 mm allow clamping of workpieces up to 170 mm in diameter. The body is made of high-grade steel, providing excellent resistance to deformation during long-term use. Precision and efficiency The WP200 self-centring 3-jaw mechanism significantly reduces setup time for welding operations. The elimination of backlash and positioning errors directly improves the quality of circumferential welds. Stable clamping of workpieces also enhances operator safety during welding. Applications The WP200 chuck is designed for use with welding rotators, welding positioners, and welding manipulators in operations involving pipes, flanges, rings, and cylindrical components. It is ideal for welding workshops, manufacturing plants, and the steel construction industry. Technical parameters Max pipe diameter: 170 mm Outer diameter: 200 mm Inner diameter: 80 mm Mounting hole spacing: 85 mm Mounting hole diameter: 9 mm For welding positioner: PS310, PS320 Iaedeycqnvopfx Anweu Weight: 10 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 500 kg, workpiece length (max.): 800 mm, workpiece height (max.): 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, tank capacity: 500 l, space requirement width: 3,000 mm, space requirement length: 3,000 mm, The machine is used daily and provides accurate and precise results. All machining operations can be programmed via the control unit, and the automatic electrode change can also be programmed. It includes an EROWA chuck and probe, along with numerous accessories and clamping devices. We can assist with loading the machine onto the transport vehicle using our own crane. Ijdpfx Aszc E Dxenweau

Condition: new, Year of construction: 2026, machine/vehicle number: 20251211005, fuel type: diesel, motor manufacturer: Cummins 6LTAA8.9-GM200, General information Field of application: Construction Weights Empty weight: 1.966 kg Functional Generator capacity: 250 kVA Dimensions of cargo space: 235 x 100 x 161 cm CE mark: yes Other information Fuel consumption: 37 Liter / Hour at 75% Load Generator: Stamford UCDM274K1 Frequency: 60 Voltage: 400 Drill equipment: Battery, Control Panel Iaedjy Uq Axjpfx Anwou Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel = Remarks = Cooling system: Heat exchanger cooled

Condition: used, mileage: 89,000 km, power: 96 kW (130.52 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 7,000 mm, total width: 2,425 mm, total height: 3,300 mm, loading space length: 4,200 mm, loading space width: 2,150 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales preferably to business customers. Internal ID number: [3360] ----Optional extras: * 12-64 months warranty (valid throughout the EU) Iasdpfsy U Tndex Anwou * New inspection * New TÜV (technical inspection) & emissions test * Nationwide delivery * Financing possible even without a down payment * Spring offer: On request and for an additional charge of just €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT shown * Regularly maintained * German vehicle * Ready for immediate use * Euro 6 standard * Accident-free * Maxi long platform body: Length = 3,400 mm / Width = 2,200 mm * Payload: 1,325 kg / 3,500 kg * Trailer coupling: 3,500 kg * Air conditioning system * Tarpaulin frame available * Reversing camera * Bluetooth multimedia system * 7 seats * Cruise control * LED headlights Special equipment: Airbag passenger side, tow hitch, exterior mirrors with long support arm, spare wheel in driving condition, mud flaps front, visibility package 1, second key with remote control, folding Additional equipment: Storage compartment in the roof lining of the driver's cab, airbag driver side, audio/radio remote control on the steering wheel, audio system: radio with USB and Bluetooth hands-free system, exterior mirrors electrically adjustable and heated, exterior mirrors electrically adjustable and heated, long support arm, on-board computer, docking station (MyFord Dock), electronic brake force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: crosswind assist, window in the cargo/passenger compartment: - fixed, 2nd row left, window in the cargo/passenger compartment: - fixed, 2nd row right, FordPass Connect including eCall, vehicle without anti-lock braking system (ABS), generator reinforced, speed limiter 120 km/h, glove box lockable, heating with recirculation, interior lights in the driver's cab: reading light front, body/superstructure: platform body double cab standard, radiator grille with chrome trim, radiator grille black gray, steering column (steering wheel) height/length adjustable, engine 2.0 L - 125 kW TDCi CAT, My Key (2nd vehicle key programmable), radio reception digital (DAB+), wheelbase 4522 mm, rear seat package 1 (2 double seats, 2nd row, removable), low emission according to exhaust standard Euro 6d-TEMP, seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, steel rims 6.5x16, start/stop system, Trend, heat protection glazing light tinted ----Do you want to lease or finance? We offer attractive offers - even without a down payment! Please contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 AM - 6:00 PM Sat: 9:00 AM - 2:00 PM Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typing errors and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers.

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Iasdpoln Ulaofx Anwju Weight 8,5 kg

Condition: used, mileage: 10 km, power: 151 kW (205.30 HP), first registration: 05/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,201 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, * Hill start assist * Emissions concept, EU6e (EA) * Rigid trailer hitch * One towing eye at the front * Airbags for driver and front passenger with passenger airbag deactivation * Roof rack with storage compartments * Exterior mirrors, electrically adjustable, heated, and foldable * 4x4 all-wheel drive * Emergency brake assist * 520 A (92 Ah) battery * Rubber floor in the driver's cab * Electronic parking brake * Battery and generator * ESP with electronic differential lock, anti-skid control (ASR), and ABS * Stone guard without Efficient Line (no CO2 optimization) * Differential lock * Electronic immobilizer * Park assist with front and rear parking sensors including side protection * USB Type-C data port(s) and charging port(s) with increased charging capacity * Daytime running lights with auxiliary driving lights and coming and leaving home function * Electric Terminal block and CFG with ABH programming * Premium interior noise reduction measures * With UNECE CS&SU * 4th automatic engine 2.0L engine 03N.G * ACC Stop & Go * 8-speed automatic transmission for 4x4 * Glove compartment with lockable lid, illuminated * Plastic entry handle on the B-pillar in the passenger compartment * "Climatronic" air conditioning system in the driver's cab * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Electrically operated child safety lock * Traffic sign information * Rear view camera system with dynamic line guidance * "Light Assist" high beam assistant * Heated leather multifunction steering wheel with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Attention and fatigue warning * MAN SmartLink * 2.0 l/130 kW automatic engine (4V) BIT * Fog lights including cornering lights * MAN Connect (on-call services/in-vehicle apps/navigation depending on device), with OCU high * 12V socket and 2 cup holders in the instrument panel * Tire pressure monitoring system * Standard wheelbase 3,640 mm * Three-point automatic seat belts with belt height adjustment and electric belt tensioners at the front * Rear wing doors with increased opening angle * Front and rear side windows and rear windows with heat-insulating glass * Two 12V sockets in the cab * Swivel seat left and right * Seat belt reminder, electric contact in the seat belt buckle, driver and front passenger seat * Seat upholstery in "Toronto Grid" fabric * Side marker lights * 2 remote control keys * Approved as 3.5t * Start-stop system with brake energy regeneration * Lane change assist * Crosswind assist * Intermittent wiper with light and rain sensor * Keyless Go with SAFELOCK * Sliding door, right, with intermediate locking * Blind spot warning on both sides and approach warning * Turn assist * Emergency assist (Active Lane Keeping Assist, Emergency Assist, and Traffic Jam Assist) * Alcohol Interlock preparation * Intelligent Speed Assist * With multifunction camera * Digital radio reception (DAB+) * Special EC type plate for commercial vehicles * Reinforced front axle * Convenience telephony with LTE and wireless charging * Lashing eyes for securing loads * Heated laminated windshield with heat-insulating glazing * 2nd battery (AGM battery) with cut-off relay and battery monitoring * Auxiliary air heater Iaedpfxey U Szvj Anwju * Full N1 approval (up to and including 3.5 t GVW) * 16" front disc brakes * 75 l fuel tank * With voice control * Partition wall removed * Driver assistance package * Light & Vision package *

Condition: good (used), Year of construction: 1980, Diesel emergency generator Iasdpfx Aot In Nyonwou MWM Mercedes - AEG built in 1980 with switch cabinet, cooler. Diesel engine MWM 8 cylinder 405 HP Generator AEG Type:SIRI 100 D/4 330KVA .

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,280 mm, total height: 2,700 mm, total width: 2,000 mm, overall weight: 11,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal Iasdpfx Anjyttbmewou AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, Metal Technics Polska Professional CNC machines, lasers and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision and reliability. UNIVERSAL LATHE MTP 800x2000 7.5 kW SPINDLE BORE 105 + DRO Manufacturer code: CW6180X2000 UNIVERSAL LATHE 800 × 2000 The machine is designed for machining workpieces, most commonly rotational solids (shafts, cones, spheres, internal and external threads). Typical tools include turning tools, drills, and threading tools. Thanks to modern solutions and equipment, the lathe is ideal for professional and industrial applications. Technical Data: Max. turning length: 2000 mm Swing over bed: 800 mm Swing over cross slide: 570 mm Swing in gap: 1035 mm Z-axis travel: 230 mm Gap length: 330 mm Bed width: 400 mm Tool post rotation: 70° X-axis travel: 420 mm Spindle speed: (16 steps) 25–1600 rpm Spindle bore: 105 mm Spindle mount: D1-8 Spindle taper: MT5 Feed X-axis: (25) 0.022–0.74 mm/rev Feed Z-axis: (25) 0.044–1.48 mm/rev Tailstock quill diameter: 90 mm Tailstock taper: MT5 Tailstock quill travel: 235 mm Tailstock adjustment: 11 mm (0.4") Metric threading: (54) 0.45–120 mm Diametral threading: (42) 0.88–160 DP Module threading: (46) 0.25–60 mm Whitworth threading: (54) 7/16–80 TPI Main motor power: 7.5 kW Power supply: 400 V Dimensions (L×W×H): 3740 × 1140 × 1910 mm Weight: 3800 kg Equipment: 3-axis digital readout (DRO) 3-jaw chuck Ø 320 mm 4-jaw chuck Ø 400 mm Faceplate Ø 450 mm Iedpfx Anoyzz Sqjweau Drive plate Splash guard Cooling system Fixed steady rest max Ø 250 mm Traveling steady rest Chuck guard Reduction sleeves Dead center Tool set

Condition: new, Year of construction: 2026, functionality: fully functional, turning length: 2,000 mm, turning diameter: 660 mm, spindle bore: 105 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, spindle motor power: 7,500 W, total height: 1,460 mm, total length: 2,840 mm, total width: 1,150 mm, type of input current: three-phase, overall weight: 3,600 kg, swing diameter over bed slide: 360 mm, Equipment: documentation/manual, Universal Lathe 660 × 2000 with DRO The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Operation manual (English) Machine available immediately. Technical Specifications Turning diameter over bed – 660 mm Turning diameter over cross slide – 360 mm Turning diameter in gap – 900 mm Turning length in gap – 250 mm Turning length – 2000 mm Bed – induction hardened Bed width – 350 mm Chuck diameter – 315 mm Spindle bore – 105 mm Spindle nose – D1–8 Spindle taper – MT7 Spindle speed range – 25 – 1600 rpm Maximum tool size – 25 × 25 mm Longitudinal feed range – 0.044 – 1.48 mm/rev Cross feed range – 0.022 – 0.74 mm/rev Iajdeyvgbfepfx Anwju Metric threads – 0.2 – 14 mm Inch threads – 2 – 112 T.P.I. Module threads – 0.1 – 7 M.P. D.P. threads – 4 – 112 D.P. Rapid feed – longitudinal 4.2 m/min Tailstock quill diameter – 75 mm Tailstock quill travel – 180 mm Tailstock taper – MT5 Main motor power – 7.5 kW Coolant pump power – 0.1 kW Dimensions (L × W × H) – 2840 × 1150 × 1460 mm Weight – 3600 kg Delivery to the customer is possible. Delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: used, Year of construction: 2018, Durst P10-200 Iaodpfx Anoy T Icyjwou Manufactured at the end of 2017 (installed in 2018) Color: 6C + White Resolution: 1000 dpi Speed: Up to 205 cm Roll option available 2 tables

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm Iodpfowa I Shsx Anwsau range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 Iaedpfx Aeu Id Ruonwju hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Technical details: max. dia. of grinding wheel: 150 mm boring diameter: 20 mm revolution per minute: 3000 U/min number of stations: 2 Stück total power requirement: 250 Watt weight: 30 kg space requirements of the machine approx.: L:0,56xB:0,46xH:1,15 m Iajdpfsu Ngtnjx Anweu techn. details: - motor AEG 150/250A-50Hz, 220/380V, connection plug CEE 16 equipment: - with under table *

Condition: excellent (used), Professional external micrometer designed for precise measurement of diameters, thicknesses, and dimensions of mechanical components. The set is equipped with interchangeable measuring tips and calibration standards, enabling operation within a wide measurement range. Technical specifications: • Manufacturer: HOLEX • Measurement range: 100–200 mm • Reading accuracy: 0.01 mm Iaodpfszaf Ulex Anwou • Interchangeable measuring tips • Calibration standards included • Wooden carrying case Condition: Used item, in very good visual condition. Completeness as shown in the photos. The mechanism operates smoothly. Normal signs of wear and tear resulting from storage and use. The set includes: • micrometer 100–200 mm, • interchangeable measuring tips, • calibration standards, • adjustment wrench, • wooden case.

Condition: good (used), CNC control, power supply, switching power supply, controller, control unit, Promodul -Manufacturer: AEG, control unit -Type: LOGISTAT CP 80-A04.1 Iasdpfx Asy Tlduenweu -Dimensions: 485/130/H170 mm -Weight: 5.3 kg

Condition: used, power capacity / kW volt / V Isdpfxey S D S Us Anwjau ampere / A AEG MAGNET SERVO MOTOR M235-G60B-900Y-MB The parts were dismantled from systems that were in operation until they were decommissioned or come from a stock clearance. Weight: approx. 35kg

Condition: used, power capacity / kW volt / V Iaedpsy S Dq Rjfx Anwsu ampere / A Type: AG132SR4W1Q4 Weight: approx. 35kg

Condition: new, Year of construction: 2025, machine/vehicle number: 2512377, fuel type: diesel, motor manufacturer: JCB 448 TWGA, General information Field of application: Construction Weights Empty weight: 1.250 kg Functional Generator capacity: 80 kVA Dimensions of cargo space: 163 x 80 x 125 cm CE mark: yes Other information Isdsx Tyx Tspfx Anwjau Generator: Mecc Alte ECP34 1s4 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Emission level: Stage V / Tier IV final Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller model: E21S, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, table height: 800 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: documentation/manual, type plate available, HYDRAULIC GUILLOTINE SHEAR 8 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 8 mm Maximum cutting length: 3200 mm Blade rake angle: 1° 30′ Number of strokes per minute: 12 Back gauge travel: 600 mm (standard) Distance between side frames: 3450 mm Iajdsyt E U Espfx Anweu Blade length: 3300 mm Table height: 800 mm Motor power: 11 kW Weight: 7300 kg Machine dimensions (L × W × H): 3850 × 2345 × 1620 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual in English Delivery to the customer is possible. Transport costs are calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 200 mm. Mounting hole: 60 mm. Equipped with indexable inserts – easy handling, suitable for work under heavy industrial conditions. Very good condition, the tool is ready for use. An ideal choice for use in machining centers and industrial milling machines. Iedpsw Sav Uefx Anweau