Used Al-Ko Clean Air Dust Extractors for sale (42,130)

Condition: good (used), Kroll M 150 Mobile Hot Air Generator Djdpfx Aexwkw Ejkmjku Application areas: Heating of halls, tents, and construction sites Frost protection in horticultural businesses or warehouses of all kinds Rapid drying of new buildings Supplementary heating in the cold season Fuel: Heating oil EL Rated heat output: 135 kW Rated heat input: 150 kW Oil flow rate: 12.7 kg/h Air volume flow: 7,300 m³/h Electrical connection: 220 V / 6.1 A Power consumption: 1.38 kW Protection class: IP 44 Dimensions: Length: 2600 mm Width: 900 mm Height: 1300 mm Weight: 270 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Washing, rinsing, and drying in a continuous process with a washing basket, used to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). The system is still connected to power. Djdpfjz I S R Eox Akmoku Machine description – see PDF. All technical specifications, illustrations, and content are non-binding and without guarantee. Subject to changes and errors. All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and in the invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively includes dismantling, removal, and loading. Delivery time: immediately Subject to prior sale / Payment due immediately upon purchase.

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan Djdpfx Akod Tir Ijmeku -Motor: Siemens type 1L4 206-6AA60-Z 200L -Motor power: 18.5 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Condition: excellent (used), 1.6 kW motor, 2,300 m³/h, 16 cm inlet Dkedsy Aagcspfx Akmeu

Condition: used, 4-bag dust extractor SIA 8/26 Dkedpfx Akszkh Etsmju

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Dodpfscqy I Ssx Akmsku Motor rated power: 11 kW Voltage: 400 V / 50 Hz Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Year of construction: 2001, condition: like new (used), Filter area: 22 m²# Nominal volume flow: 4700 m³/h Minimum flow rate: 3530 m³/h External pressure suction port at V min.: 2450 Pa Dkodpjk Tahzjfx Akmeu Sound pressure level max.: 69 dB Suction nozzle Ø: 250 mm Suction engine speed: 3000 rpm Motor: 400V 5.5KW Required space: 2520 x 900 x 1963 mm Weight: 730 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 160mm Djdov Drqwopfx Akmoku Maximum volume flow: 2000 m³/h Nominal volume flow: 1448 m³/h Volume flow monitoring: pressure difference display Negative pressure: 3000 pa Filter area: 10.5 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 64 db Chip bag volume: 160 l Filter cleaning: pneumatic Motor power: 3 kW Machine length: 1800 mm Machine width: 820 mm Machine height: 2220 mm Weight: 320 kg

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 chip extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g. during metal or wood processing). Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Djdpfeznibwex Akmeku Current (Amps): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs upon request!

Condition: excellent (used), Laboratory hood, fume hood, benchtop hood, safety workbench, downflow, Nuaire NU-440-600E The Nuaire 440-600 is ergonomically designed for user comfort and offers users more legroom. The Nuaire 440-600 features a unique sealed design and a True Laminar AirFlow HEPA filter system. The 440-600 biosafety workbench has an advanced electronic AirFlow Control System with precise, programmable control for a safe, reliable environment. Technical specifications: Voltage: 230V, 50Hz Current: 11A Downflow: 38 m/s Inflow: 46 m/s Dodpfx Akeirtxbsmeku Included: - 2x 230 Volt power outlet - Fluorescent lamps External dimensions (W) x (D) x (H): 200 x 85 x 150 cm Item condition: used You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Erlab Captair Filtair 936 Filter Fume Hood The ductless, filtering chemical fume hoods from Erlab offer the world's most powerful filtration and guarantee safety and performance. A system with countless advantages that provides comprehensive protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical performance criteria of the fume hood and ensures your safety at all times. Advantages Perfect user protection Filtration safety: All models of the captair@ filtair filter fume hood comply with the AFNOR NFX 15-21 Class II standard. Retention of hazardous substances from chemical vapors in the work area, guaranteed by controlling the air velocity on the front panel and complying with standards for the retention of hazardous substances (XPX 15203, BS 7258, DIN 12927). A sampling valve for the exhausted air allows the user to check the filter saturation at any time using color reaction tubes (not included). The front and door made of acrylic protect against any chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Sloping front for a better view of the work process. Well-designed openings for the hands provide the user with a lot of freedom of movement in the work area. Dsdpoyk Dq Hefx Akmeku Stuffing boxes for inserting electrical or power cables into the work area. Work position adapted to the user. Very low noise level (49 dBA). Transparent walls for a good overview of the work processes in the work area. Easy installation / energy saving No exhaust duct required, just a power outlet. Direct installation in your laboratory or on an optional mobicap™ rolling table. Energy saving, by recycling the purified air from the unit without consuming heated or cooled air. Erlab/Captair Filter Fume Hood Filtair 936 Connection values: 230 V, 50 Hz, 94 W Safety class 2 Air flow rate m³/h: 200 m³/h Air inlet velocity, front m/s: 0.51 Filtration type S Filter 960-961. Safety class 3 Class for retention of hazardous substances B 2 fans Analog flow meter Noise level approx. 51 dB(A) External dimensions: 110x84x74 cm Internal dimensions: 87x82x73 cm Volume of the work area m³: 0.432 Two handles in the front panel Available filters: MF and VF CE marking. You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: reconditioned (used), machine/vehicle number: 2433345525, functionality: fully functional, Suction nozzle, 125 mm Dkjdpfxsiw D U Ns Akmsu Nominal volume flow rate 884 m³/h Motor power 2.2 kW, 16 A Mobile Weight approx. 194 kg L x W x H: 1000 x 840 x 1650 mm Container size 730 x 660 mm Manual vibration

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Djdpjh D If Hsfx Akmsku Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Dsdpfxex Ihiij Akmjku Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Centrifugal fan, dust extractor fan, fan, extractor, dust fan Djdpfx Akjfd Hffsmoku -Motor: Siemens 2.2 kW -Voltage: 560 V -Speed: 3515 rpm -Volume flow: 1425 m³/h -Connection input: Ø 148 mm -Connection output: 390 x 330 mm -Dimensions: 650/520/H470 mm -Weight: 52 kg

Condition: like new (used), Laser engraving, laser marking, laser welding, laser structuring, etc. 2x Ø 50 mm available on the roof side Mobile storage device Very quiet operation Simple filter handling, modular design Operating elements on the front Powder-coated, robust housing Dkedpfsrypcdex Akmsu Installation of extraction arms Volume flow control: stepless adjustment of the suction power Particle filter occupancy indicator: visual signaling SUB D9 interface: standard equipment, remote I/O, operating message, 100% filter Dimensions W x D x H: approx. 1400 x 1200 x 2000 mm Weight: approx. 35 kg

Condition: new, Riedex dust extraction unit DM-200/M-B-L - new Dust extraction unit with 2 chip collection bins Left-hand version Dsdpfxezykz Ne Akmoku Motorized cleaning system Motor power: 4.0 kW Mobile

Condition: good (used), Lister KL5L air-cooled chiller The unit operates on the principle of indirect cooling: The internal pump pumps cold water from the integrated tank to the external process (e.g., a machine). The water absorbs heat there, warms up, and flows back into the Lister chiller's integrated evaporator, where the warm water transfers its energy to the refrigerant and is cooled down again. The extracted heat is dissipated into the installation room as warm air via the fan. Due to its compact 3.25 kW cooling capacity, this model is ideal for smaller industrial applications, such as cooling laboratory equipment, laser systems, small welding units, or machine tools. Manufacturer: Lister Type: KL 5 L Cooling capacity: 3.25 kW Voltage: 400 V Frequency: 50 Hz Current: 6.3 Amps Refrigerant: R 134a Maximum operating pressure: 13 bar Dkjdpox Elvzefx Akmou Dimensions (W x D x H): 940 x 560 x 1100 mm You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2024, condition: as good as new (ex-display), Metalclean - Metalclean-P-120 spray cleaning system in stainless steel 1-tank spray cleaning system with a rotating basket. Equipped with a pneumatic oil separator. Stainless steel pump with a spray pressure of 5 bar. Usable dimensions = D = 1,200 mm H = 700 mm Dedoir Anqjpfx Akmeku Load capacity / batch = 300 kg Tank volume = 270 liters Operating voltage = 3 x 400 V/N/PE 50 Hz Fume extraction

Condition: new, Year of construction: 2026, functionality: fully functional, Set of Fabric Dust Collection Bags for CORMAK Extraction Systems The set of 2 CORMAK fabric bags is a practical consumable component designed for dust extraction systems used to collect wood chips, sawdust, and dust generated during woodworking. Made from durable fabric material, the bags provide effective waste collection and convenient operation of the extraction system. Dkjdey T Hbhspfx Akmou Key Advantages Set of 2 bags – a ready-to-use set of replacement bags for the dust extraction system. Durable fabric material ensuring a long service life during operation. Effective collection of wood chips and sawdust generated during woodworking. Easy replacement and quick maintenance of the extraction system. Application The bags are designed for use with CORMAK industrial and workshop dust extraction systems used in joineries, manufacturing facilities, and woodworking workshops. Technical Data Specification Value Bag diameter 500 mm Bag height 850 mm Quantity per set 2 pcs.

Year of construction: 2010, condition: like new (used), 2 units of air purification systems Maximum air flow rate: 1450 m³/h Air velocity: 0.7 m/s Voltage: 230 V, 50 Hz Dimensions (L x W x H): 800 x 800 x 1250 mm / unit Weight: 160 kg / unit Dkodpjdt E Akofx Akmou New price: 7,200.00 € / unit Depending on your needs, we can also supply new replacement filters and spare parts! These two air purification systems are sold only as a package. SPECIAL PRICE: 1,990.00 € / unit, plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2020, machine/vehicle number: 525, powerful vacuum cleaner for dusts, smoke, chips suction power 7.58 m³ / min vacuum 520 mbar air demand 3.25 m³ / min suction nozzle NW 76 mm suction hose 5.5 m collection container 60 litres Dksdpop Sczbofx Akmsu HEPA safety filter cartridge 2.2 m² - dust class H space requirements length - 1,100 x width - 680 x height - 2,200 mm weight approx. 130 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM230 Dust Collector is a professional dust extraction system designed for small and medium-sized woodworking workshops. Featuring a compact design, 1,000 m³/h airflow capacity, and a standard 230 V power supply, it efficiently removes sawdust, wood chips, and fine dust without requiring costly electrical upgrades. Equipped with a durable WhirlWind metal impeller and a mobile wheeled base, the FM230 combines reliable performance with high build quality for everyday workshop use. Key Features High extraction capacity of 1,000 m³/h – effectively removes sawdust, chips, and dust from woodworking machines. Standard 230 V power supply – plugs into a conventional mains outlet without electrical modifications. WhirlWind metal impeller – provides stable operation, excellent durability, and resistance to heavy workloads. Mobile wheeled base – allows easy movement around the workshop using robust bearing-mounted wheels. Sealed filtration system – efficiently separates dust particles, helping maintain cleaner workshop air. Ø100 mm extraction inlet – compatible with most woodworking machines and extraction hose systems. Construction and Technology The FM230 is equipped with a multi-blade steel impeller engineered for high airflow performance while maintaining relatively low operating noise. The machine is mounted on a sturdy mobile frame, making it easy to reposition even in confined workshop spaces. The dust collector features two heavy-duty bags—a filter bag and a collection bag—manufactured from durable materials that provide excellent airflow while maintaining effective filtration. A quick-release clamping system allows fast bag removal and replacement without the need for tools. Performance and Efficiency The CORMAK FM230 woodworking dust collector is highly effective at extracting dust directly from machines such as: Panel saws Surface planers Thickness planers Spindle moulders Tenoning machines With an airflow capacity of 1,000 m³/h, the FM230 maintains a clean working environment even during intensive woodworking operations. Weighing just 27 kg, its compact footprint makes it an excellent choice for workshops where space is limited. Applications The FM230 is ideal for: Dsdpfsvu Az Uex Akmoku Professional and hobby woodworking workshops Joinery and furniture production Cutting, routing, planing, and sanding wood-based materials Machines equipped with Ø100 mm extraction ports Mobile workstations requiring a portable dust extraction solution Standard Equipment Fabric filter bag Waste collection bag WhirlWind metal impeller Mobile base with wheels Bag mounting clamps Optional Equipment Flexible Ø100 mm extraction hoses Y-connectors and reducers for multiple machine connections High-efficiency filter bags Noise reduction silencers Technical Specifications Specification Value Motor power 0.75 kW Airflow capacity 1,000 m³/h Maximum vacuum pressure 1,020 Pa Noise level 70 dB Collection bag capacity 60 L Number of bags 2 Extraction inlet diameter Ø100 mm Height 1,500 mm Width 420 mm Length 600 mm Power supply 230 V / 50 Hz Weight 27 kg

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Dedpfx Akjumm Npsmjku

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Shrew bag volume: 480 l Filter cleaning: mororic Dkodpepfat Nofx Akmou Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg