Used Atlantic Plate Shear for sale (12,636)

Condition: used, sheet width 2500 mm plate thickness 3,0 mm Iiedpsyv I H Dsfx An Hef distance between columns 2550 mm back stop - adjustable max. 510 mm weight of the machine ca. 1,8 t dimensions 3,3 x 1,4 x 1,8 m

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm Iiedpjyuzcuofx An Hsf no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, Hydraulic plate shear STEINER, Type HTS 30/20 R Machine No. 315 Year of manufacture 1982 Cutting length 3050 mm Cutting thickness 20 mm Back gauge 800 mm, controlled Motor power approx. 30 kW Power connection 400 volts, 50 Hz - Back gauge with positioning control ELGO - Back gauge adjustment via ball screws - Safety light curtain SICK at the front as a guard - 3 units of material support arms with ball rollers - Electric foot switch - Spare blades - Oil cooler with air heat exchanger - Very robust machine with a very stable design Space requirement of the base machine L x W x H 4650 x 2610 x 3200 mm Weight of the base machine 27000 kg Space requirement for transport (base machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Total weight 27000 kg Good condition Machine can be inspected in warehouse 37235 Hessisch Lichtenau, test cuts possible. Ijdpfx Aod Hxx Aon Heif The lower clamps are currently being re-sealed, and the corresponding price adjustment will be made in the next few days.

Condition: used, functionality: fully functional, Year of construction: 2000, Equipment: CE marking, angle stop, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic Shear Brand: DURMA Type: DHGM3020 Sheet Length: 3000 mm Steel Thickness 37: 20 mm Voltage: 3x380V-50 Hz Length: 4450 mm Ijdpfoxn Rhrex An Hoif Width: 3850 mm Height: 2450 mm Weight: 20,000 kg

Condition: used, Year of construction: 1995, sheet width 6000 mm plate thickness 6 mm distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ijdpfoyutt Eox An Heif About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, Year of construction: 1997, Used guillotine shear by Safan Isdpfx Aoxrf Hwsn Hsif Type: VS 255 4 Capacity: 2550 x 4 mm Electric back gauge with NC control

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Capacity: 4300 x 6 mm Iisdpjxtpwvofx An Hsf Year of manufacture: 1987 Electric backgauge with NC readout Adjustable cutting angle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 66654, sheet thickness (max.): 6 mm, working length: 4,050 mm, TECHNICAL DETAILS Working length: 4,050 mm Maximum sheet thickness: 6 mm MACHINE DETAILS Voltage: 380 V EQUIPMENT Electrically adjustable back gauge Electrically adjustable cutting angle Electrically adjustable blade gap Iedpfxeylv Nwj An Hoif Electrically adjustable blade gap

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 20345, sheet thickness (max.): 10 mm, working length: 4,000 mm, TECHNICAL DETAILS Max. sheet thickness: 10 mm Working length: 4,000 mm Iijdpfx Ansylv Itj Hjf MACHINE DETAILS Voltage: 380 V 50 Hz EQUIPMENT Electric backgauge

Condition: used, sheet width 2500 mm plate thickness 4 mm distance between columns . mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Iedpfxoyr Skwj An Hsif We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: 11.2760, working width: 3,100 mm, sheet thickness (max.): 8 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Control: CNC Max. working width: 3,100 mm Throat depth: 40 mm Iodpfxew Tzkve An Hsif Max. sheet thickness: 8 mm Back gauge: 1,000 mm Motor power: 16.5 kW MACHINE DETAILS Transport dimensions: 3,400 mm x 2,300 mm x 2,100 mm (L x W x H) Transport weight: 8,000 kg Transport packages: 2 Documentation available: Yes CE marking present: Yes

Year of construction: 1966, condition: used, machine/vehicle number: 4661, working width: 5050 mm metal sheet thickness: 10 mm power: 30 kW Iodpfx Aneb N Ercs Hoif space needed: 2450 x 5600 x 2500 mm weight: 28000 kg

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg Iedpfx Anjb N Erbe Heif

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm power: 380 V, 6,3 kW Ijdpfob H Ibusx An Hoif space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Year of construction: 1963, condition: used, machine/vehicle number: 63731, working width: 1040 mm metal sheet thickness: 12 mm rear stop: von Hand bis 500 mm Iedpfeb N Ektsx An Hjif power: 380 V, 11 kW space needed: 2500 x 2150 x 1900 mm weight: 4100 kg

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 Iodpfx Anexrp Tho Heif stroke rate approx.: 9 - 17 /min gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW required space incl. back gauge: 3600 x 1800 x 1580 mm weight: 5200 kg

Condition: good (used), functionality: fully functional, Year of construction: 1975, sheet thickness (max.): 4 mm, power: 22.06 kW (29.99 HP), cutting length (max.): 2,500 mm, Old but well-maintained machine Ijdpfx Anjr Nvf Uo Hsif

Condition: used, Year of construction: 1980, sheet width 3000 mm plate thickness 6 mm cutting angle quantity of oil 150 l total power requirement 15 kW weight of the machine ca. 6,2 t dimensions of the machine ca. 3,9 x 2,2 x 1,7 m Front stop on the left, 2 support arms, Iedpjvxwihefx An Heif motorized rear stop, manual adjustment of the cutting gap, 1 set of spare knives

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 09233-K06P27, working width: 3,100 mm, stroke rate (max.): 10 1/min, sheet thickness (max.): 16 mm, distance between stands: 3,400 mm, working height: 900 mm, TECHNICAL DETAILS Sheet width: 3,100 mm Sheet thickness: 16 mm Frame gap: 3,400 mm Shearing angle: 2.5° Working height: 900 mm Backgauge: 1,000 mm Hold-downs: 14 units Strokes per minute: 10 MACHINE DETAILS Control: CYBELEC CybTouch 6 Total power requirement: 30 kW Dimensions & Weight Space required: approx. 4,150 x 2,360 x 2,450 mm Machine weight: approx. 16,400 kg Oil capacity: 500 l EQUIPMENT Iijdeygw Epjpfx An Hjf Electric backgauge 1,000 mm Electric cutting gap adjustment Electric cutting angle adjustment Cutting length limitation Light barrier at rear of machine Finger guard at front Ball rollers in support table 1x side stop 2x front support arms Foot switch

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch Iedsuagxpspfx An Hjif - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: used, Year of construction: 1973, sheet width 3100 mm plate thickness 3 mm rear stop 1000 mm down holder 18 Stk cutting angle 0.5 - 1,0° 30° ° oil volume 150 l total power requirement 5,5 kW Ijdpfx Anetzv T Te Hsif weight 4300 kg dimensions of the machine ca. 3800 x 1950 x 1600 mm Features: - Manual rear stop (front via handwheel) - Manual cutting angle adjustment - 1x front support arm - 1x side stop - Front finger guard - Operating instructions (English)

Condition: used, Year of construction: 2018, sheet width 4050 mm plate thickness 20 mm distance between columns 4100 mm column daylight 4200 mm no. of strokes 10-20 Hub/min working pressure 250 bar total power requirement 85 kW weight of the machine ca. 43,6 t dimensions of the machine ca. 5,5x2,8x2,9 m No. 793 Please note: this machine has no electrical system. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Iedpfx Aeyqvchon Heif than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1987, sheet width 4000 mm plate thickness 6 mm distance between columns 4100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Iedjyqt E Hspfx An Hoif More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2021, condition: new, - Capacity: 1350 x 3 mm - Manual back gauge - Foot pedal control - Rear light curtain Isdpfx Anog Tmz Ue Hsif - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - 400V

Condition: new, back gauge: 750 mm, - Capacity: 1050 x 6 mm - NC electric back gauge - Foot switch - Rear light curtain - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight: 1800 kg Iodpfx Aegg N Hbjn Hoif - 400V