Used Bewap Complete Powder Coating Line 7.2 M for sale (79,286)

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Tsdpfx Ajfzccnoklea ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Todofzkrnspfx Aklja Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Tsdpfxjfz A Iwe Aklja Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ Tjdeflk Awopfx Aklsa 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators. Tedpfoflmdwsx Aklsa

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Todpsyg H Dhjfx Akloa Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk. Tsdpfx Aofzciqjklea

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Tjdpfx Asfzkqmoklea Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Todpfx Aksfz Nb Tolja Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Tsdpfx Akofz U S Eolsa Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Todpfx Aksfz U Tisloa Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, Year of construction: 2024, functionality: fully functional, total length: 1,266 mm, total height: 2,847 mm, total width: 1,062 mm, warranty duration: 24 months, power: 1.5 kW (2.04 HP), input voltage: 380 V, filter area: 11 m², energy consumption: 2 kWh, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Available immediately ⚡ Professional support! ✈️ The stated price is the gross price including VAT, plus shipping costs. ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for an individual transport quote. ✅ Available immediately – 1 unit in stock ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty Available from stock – no production waiting time ⭐ Matech Powder Booth – MATBOOTH.FT-01-S MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT-01-S is a compact powder coating booth for professional manual powder coating of small and medium-sized workpieces. The S version is particularly practical for applications where the workpiece is inserted into the booth and coated within the booth. The workpiece can be pushed into the working area using the suspension device on the booth. This makes this version particularly suitable for applications with more intensive powder application. Thanks to the special fan motor housing, this booth enables comfortable and quieter operation. ☘️ Available immediately ☘️ Compact ☘️ Clean coating ✅ In-stock item – available immediately ✅ No waiting time for production ✅ S version for coating inside the booth ✅ Workpiece guidance via the booth's own suspension device ✅ Suitable for applications with more intensive powder application ✅ Compact solution for professional powder coating ✅ Quieter operation thanks to the special fan motor housing ✅ Automatic filter cleaning system ✅ Economical use through powder recovery ✅ Individual adaptation possible through various additional options Todpfjdhi Aaox Aklea ➖➖➖➖➖ Technical features: ✔️ 1 polyester filter ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning time ✔️ Powder recovery container: 30 liters ✔️ Suspension device for guiding the workpiece into the booth ✔️ Special fan motor housing for quieter operation ✔️ 1 piece 1.5 kW extraction fan ✔️ Extraction capacity: 2500 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust connection needed – with the nano-filter box! ✨ With the optional nano-filter box, you can operate your powder booth without connecting it to an exhaust stack or a fixed exhaust duct. This makes the booth particularly flexible to use – even in workshops where there is no direct exhaust system. In addition, the booths can be individually adapted and modified to your working requirements with various options. ➖➖➖➖➖ Secure your in-stock item now! This powder booth is currently available in stock (1 unit). Ideal for companies that want to start professional powder coating in the short term or expand their existing coating capacity. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models. Please contact us for leasing, rent-to-own or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from the service and quality advantages! ✨ Request a quote now – make your company ready for professional powder coating!

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,258 mm, total height: 2,790 mm, total width: 2,370 mm, warranty duration: 24 months, input voltage: 380 V, Equipment: lighting, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Made to order ✅ Brand new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2 years warranty ⏱️ Delivery time: approx. 4 weeks after payment receipt Please also inquire about current stock availability. ⭐ Matech Powder Coating Booth – MATBOOTH.FT.3-L MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT.3-L is a professional powder coating booth for manual powder coating of small to medium-sized workpieces. The L version features a longer base frame, providing more working comfort and advantages for wider workpieces. Thanks to the 3 polyester filters, the high suction power, and the automatic filter cleaning system, the booth enables clean, practical, and economical operation. ☘️ Efficient ☘️ Clean application ☘️ Professional results ✅ L version with longer base frame ✅ Advantageous for wider workpieces ✅ Compact solution for professional powder coating ✅ Powerful extraction system ✅ Automatic filter cleaning system ✅ Economical operation through powder recovery ✅ Individual customization possible through various optional features ➖➖➖➖➖ Technical specifications: ✔️ 3 polyester filters ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning time ✔️ Powder recovery container: 30 L ✔️ 1 x 3 kW extraction fan ✔️ Suction capacity: 3500 m³/h ✔️ Control panel Tedpfx Aegf A Shjkloa ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust connection required – with the nano-filter box! ✨ With the optional nano-filter box, you can operate your powder coating booth without connecting it to an exhaust stack or a fixed exhaust duct. This makes the booth particularly versatile, even in workshops where there is no direct exhaust system. In addition, the booths can be individually adapted and modified to your working requirements with various options. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models so that you can flexibly plan your investment. Please contact us for information on leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from our service and quality advantages! ✨ Proton Maschinenbau offers professional Matech surface technology for industrial applications. Our machines are manufactured to order and delivered as new, unused machines with a 2-year warranty. Special sizes or individual designs are available upon request. We will gladly plan a suitable solution for your workshop. Request a quote now – get your company ready for professional powder coating! ☀️ 2 YEARS WARRANTY ☀️

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Todpfxeyhbmtj Aklea

Condition: new, functionality: fully functional, Year of construction: 2026, Detailed Specification: - Internal dimensions: 5500 × 1500 × 2300 mm (L × W × H) - External dimensions: 5700 × 1900 × 2700 mm (L × W × H) - Entrance doors: Double-wing, 1700 × 2300 mm (W × H) - Wall panels: Thickness 100 mm, width 950 mm, tongue-and-groove structure; steel sheet 0.5 mm with mineral wool insulation inside - Box: Panels 100 mm thick, filled with mineral wool - Heating system: RIELLO oil burner model 40G20; heating capacity 200,000 Kcal/h; heat exchanger made of 2 mm stainless steel - Maximum heating output: 200,000 Kcal/h, total 1 set - Roof: Panels 100 mm thick with mineral wool insulation inside - Control system: Heating control, time setting, fault indicator, emergency stop, hour counter, temperature limit regulator, total operating hours display - Total power: 6 kW Tedpfsxna U Uex Aklja - Overhead conveyor system: 4 tracks; maximum load 400 kg each We can manufacture ovens of any required dimensions. We provide complete systems including transport traverses, spray walls, and powder coating guns — as shown in the photos.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 220 V, STR-SMART Multicolor Powder Coating Gun Set | Touch Control | Wi-Fi | New ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized shipping quote. ✅ Brand new, unused professional industrial product ✅ 2-year warranty ⏱️ Delivery time: approx. 15 days after receipt of payment Please additionally inquire about current stock availability. ➖➖➖➖➖ ⭐ STR-SMART Multicolor Powder Coating Gun Set Tedpfx Aketpxpfslsa ⚡️⚡️⚡️ATEX-certified.⚡️⚡️⚡️ SMART TECHNOLOGY – WITH PROTON SERVICE! The STR-SMART Multicolor Powder Coating Gun Set is a state-of-the-art solution for professional powder coating tasks, offering high efficiency, user-friendly operation, and flexible use with a variety of powder colors. With touch controls, Industry 4.0 features, Wi-Fi connectivity, and remote access, the unit offers optimal convenience in daily use. Up to 100 different operating parameters can be stored—ideal for recurring coating jobs and streamlined workflows. The lightweight, ergonomic gun ensures comfortable handling. With various nozzle types, the set can be adapted to diverse coating styles. ☘️ Powerful ☘️ Cost-Effective ☘️ Environmentally Friendly ✅ Multicolor capability for flexible color applications ✅ Touch operation, 7" TFT touchscreen ✅ 100 storable operating parameters ✅ Wi-Fi connectivity and remote access ✅ Digital operating manual in 4 languages ✅ Ergonomic, lightweight gun ✅ Nozzle types for different coating styles ✅ Professional solution for manual powder coating ➖➖➖➖➖ Technical Specifications: ✔️ SMART electro-pneumatic control panel ✔️ Input voltage: 110–240 V AC ✔️ Power consumption: 25 W ✔️ 7" TFT touchscreen ✔️ Corona system ✔️ Corona current limit: 0–120 μA ✔️ Air pressure: max. 6–8 bar ✔️ Air consumption: 116 l/min ✔️ Maximum powder coating output: 450 g/min ✔️ Powder feed rate: 0–27 kg/h ✔️ Gun weight: approx. 460 g ✔️ Powder coating hose: 6 m ✔️ Power cable length: 6 m ✔️ Electrical protection class: IP54 ✔️ European Standard: EN 50050:2 ➖➖➖➖➖ This set is ideally suited for companies seeking a modern, digital, and efficient solution for manual powder coating tasks. The storable parameters facilitate repeatable results, making it perfect for professional workshops and industrial applications. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer various financing models so you can plan your investment flexibly. Contact us for information on leasing, hire purchase, or installment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from superior service and quality! ✨ Our machines are built to order and supplied as new, unused units with a 2-year warranty. Special dimensions or customized versions are available on request. We are happy to help design the right solution for your workshop. Request your quote now—prepare your business for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, input voltage: 220 V, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs are calculated separately depending on the delivery address. Please contact us for a customized transport quote. ✅ Brand new, unused professional industrial product ✅ 2-year warranty ⏱️ Delivery time: approx. 15 days after payment receipt Please also inquire about the current stock availability. ➖➖➖➖➖ ⭐ STR-ELITE Multicolor Powder Coating Gun Set ⚡️⚡️⚡️It is ATEX certified.⚡️⚡️⚡️ ELITE TECHNOLOGY – WITH PROTON SERVICE! The STR-ELITE Multicolor Powder Coating Gun Set is a professional solution for manual powder coating applications, offering high efficiency, ease of use, and reliable performance. The microprocessor-controlled system with AOS Automatic Optimization System ensures optimized coating performance in daily use. The 4-mode memory option simplifies recurring applications and supports fast, practical workflows. Tjdpfefvqgkox Aklja With RS485 Modbus communication and an LED warning system against network errors, the device offers additional system security, reliable data transmission, and quick error detection. The lightweight and ergonomic gun enables comfortable working. Various nozzle types allow the set to be used for different coating styles. ☘️ Powerful ☘️ Economical ☘️ Environmentally friendly ✅ Multicolor design for flexible color applications ✅ Microprocessor-controlled system ✅ AOS Automatic Optimization System ✅ 4-mode memory option ✅ RS485 Modbus communication ✅ LED warning system against network errors ✅ Ergonomic gun with low weight ✅ Nozzle types for various coating styles ✅ Practical solution for professional powder coating ➖➖➖➖➖ Technical specifications: ✔️ Electro-pneumatic control panel ✔️ Input voltage: 110–240 V AC ✔️ Power consumption: 25 W ✔️ Corona system ✔️ Corona current limitation: 0–120 μA ✔️ Air pressure: 6–8 bar max. ✔️ Air consumption: 116 l/min ✔️ Powder coating flow rate: 0–27 kg/hour ✔️ Powder coating performance: max. 450 g/min ✔️ Gun weight: approx. 460 g ✔️ Powder coating hose: 6 m ✔️ Voltage cable length: 6 m ✔️ Electrical protection class: IP54 ✔️ European standard: EN 50050:2 ➖➖➖➖➖ This set is particularly suitable for companies looking for a robust, portable, and high-performance solution for manual powder coating applications. The memory functions and automatic optimization support consistent, efficient, and professional coating. ➖➖➖➖➖ ✳️ Maintain your liquidity! We offer you various financing models so that you can flexibly plan your investment. Please contact us for information on leasing, hire purchase, or installment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from service and quality! ✨ Our machines are manufactured to order and delivered as new, unused machines with a 2-year warranty. Special sizes or individual designs are available upon request. We will be happy to plan a suitable solution for your workshop. Request a quote now – make your company fit for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Condition: used, Year of construction: 2014, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✨✨Buy directly from the manufacturer and benefit from price and quality advantages!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅Contents of the system: ►1 unit - Gas-heated large powder coating oven Tjdeiivq Uspfx Aklsa ►1 unit - Automatic powder coating booth ►1 unit - Electrically heated small powder coating oven ►2 units - Room-type monocyclone manual powder coating booth ►6 units - Automatic powder coating gun ►3 units - Manual powder coating gun ►1 unit - Automatic powder recovery unit ►6 units - Monocyclone ►1 unit - Automatic control panel ►1 unit - Automatic rod movement system, speed-controlled ►2 units - Movable platform, speed-controlled ►8 units - Parking station ►300 m - Conveyor rail, 1000 kg capacity ►12 units - Rods for hanging Our system is located at Anhaltstr. 30, 14943 Luckenwalde. You can schedule an appointment to view the machines. The system has been in operation for 10 years. Since we are the direct manufacturer of the system, we can make any desired modifications to the machines by mutual agreement. Does it not fit into your existing assembly area? Then we can make changes to the layout. Please check the PDF file of the system using the link below.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 60 kW (81.58 HP), input voltage: 380 V, inner dimension length: 4,800 mm, inner dimension width: 1,500 mm, inner dimension height: 1,800 mm, total length: 5,833 mm, total width: 1,800 mm, total height: 2,553 mm, fuel type: electric, Equipment: CE marking, documentation/manual, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast Delivery ⚡ Professional Support! ✈️ Shipping costs will be calculated separately depending on delivery address. Please contact us for a personalized transport offer. ✅ Built to order ✅ Brand-new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorized European distributor for Matech products ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment 📦 Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Curing Oven with Electric Heating – MATOVENB-151848 MATECH QUALITY – WITH PROTON SERVICE! ☘️ Efficient ☘️ Powerful ☘️ Professional Curing ✅ Electrically heated powder curing oven ✅ Digital temperature control up to 220°C ✅ Adjustable curing temperature and cure time ✅ Programmable exhaust fan function ✅ Audible signal at end of curing cycle ✅ Insulated door with special locking system ✅ Durable sandwich panel construction with high-performance insulation ✅ Timer function from 10 minutes to 24 hours ✅ Automatic shutdown after process completion ✅ Usable with mobile workpiece trolley ✅ Optional shelf system for small batch processing ♨️ Also available as a high-temperature version up to 500°C. ⚡ Depending on model/project, also available with electric, gas or diesel heating. ➖➖➖➖➖ Technical Specifications: ✔️ Model: MATOVENB-151848 ✔️ Internal & external dimensions: see engineering drawing in the image gallery ✔️ Electric heating capacity: 60 kW ✔️ Blower capacity: 2 x 3,000 m³/h = 6,000 m³/h ✔️ Circulation fan: 2 x 1.50 kW ✔️ Exhaust fan: 0.75 kW ✔️ Total power: approx. 64 kW ±10 % ✔️ Digital temperature regulation ✔️ Infinitely variable temperature control up to 220°C ✔️ Internal: 1.2 mm galvanized steel ✔️ External: 1.2 mm powder-coated steel ✔️ Insulation: 150 mm total (50 mm rock wool + 100 mm glass fiber) ✔️ Adjustable curing time ✔️ Programmable exhaust fan ✔️ Audible signal at process end ✔️ Control panel: 1 unit Additional MATOVENB powder ovens available in various sizes. Dimensions and technical details for further models can be found in the attached catalog. ➖➖➖➖➖ ⚙️ Optional Control Features ✅ PID control for precise temperature management ✅ Touchscreen interface and smartphone control ✅ Ramp heating mode for defined temperature profiles ✅ Process parameter storage Tedpfswc E Hzox Akloa ✅ Weekly & monthly reports at the push of a button ➖➖➖➖➖ 🛡️ Safety and Process Control Safety sensor to prevent overheating Automatic shutdown in case of fault Audible warnings in case of errors Fume extraction via automatic ventilation system ➖➖➖➖➖ ♨️ Ramp-Heating Mode (optional) Precisely control temperature profile and dwell times: • Reach target temperature within a defined time • Hold at desired duration • Controlled cool-down to target temperature • Automatic notifications for process events ➖➖➖➖➖ ✳️ Preserve your liquidity! We offer various financing models. Please contact us for options on leasing, hire purchase, or installment plans. ➖➖➖➖➖ Custom sizes or individual configurations available on request. We are happy to plan a solution tailored to your workshop. Enquire now – get your business ready for professional powder coating!

Condition: used, functionality: fully functional, COMPLETE POLAR 137 ED AUTOTRIM CUTTING LINE CONSISTING OF: POLAR 137 ED AT GUILLOTINE with Autotrim device for automatic waste trim removal, Tedpfx Asy R R Rheklea useful cutting width 137 cm, complete with side connecting stainless steel air tables, press before the blade, swiveling and tiltable saddle POLAR RA 6 JOGGER with air removal roller, Year 2000 POLAR TR 130/4 AUTOMATIC DELIVERY Possibility to configure the delivery and jogger on the right or left The line is installed and available for testing at our showroom

Condition: used, Used Bottling Lines for edible oil 6000 bph General Configuration of the Bottling Line The Used Bottling Lines for edible oil 6000 bph line processes edible oil in 1-liter PET bottles, operating at a nominal speed of 6000 bottles per hour. The configuration includes equipment from multiple manufacturers, integrated to ensure continuous operation and reliability in filling, labeling, packaging, and palletizing. Operators correctly shut down the entire system in December 2022. At present, the machines are dismantled and stored in suitable conditions. Consequently, this line is immediately available for relocation and reuse. Overall, the structure represents a compact yet complete solution for medium-scale production. Container Formation: KOSME Blow Molding Machines The Used Bottling Lines for edible oil 6000 bph line includes two blow molding machines from KOSME, model KSB3000, year 2001. Each unit works with a preform box and an automatic transport system that feeds the blower. As a result, the system supports on-site bottle production. Therefore, it reduces logistics costs and improves plastic material handling. In addition, the dual-machine setup enhances production continuity and minimizes downtime. Cooling System: MTA Chiller and Air Conveyors An MTA chiller, model TAE 051, year 2000, cools the molds in the blow molding machines. Moreover, KOSME air conveyors, model L2000, year 1999, made of AISI 304 stainless steel, transfer the blown bottles to the filling monoblock. Notably, the system includes electrical cabinets with integrated PLCs and built-in air filters. Thus, it ensures effective airflow control and maintains consistent air quality. From a technical standpoint, this contributes to long-term reliability and hygienic conditions. Filling Monoblock: ICS RVP-12/ZS-3N The ICS filling monoblock, model RVP-12/ZS-3N, year 1995, serves as the core of the Used Bottling Lines for edible oil 6000 bph. This machine doses edible oil with precision, ensuring product integrity and consistent fill volumes. Furthermore, the system synchronizes with upstream and downstream units. Consequently, it enables stable operation even under variable load conditions. Likewise, its mechanical construction supports easy maintenance and spare part replacement. Todpfx Akowlt Dgelja Labeling Machine: ICS with Cold Glue An ICS labeling machine, model ERG-6/2/2, year 1995, applies paper labels using cold glue. Specifically, the machine ensures proper adhesion on PET containers. Additionally, it supports the 1-liter format used throughout the line. In practice, this technology remains widely adopted for edible oil packaging. Therefore, the labeling unit integrates efficiently into the overall production layout. To sum up, it provides a cost-effective solution without compromising performance. Internal Handling and Packaging ICS conveyor belts, installed in 1995, connect all key stations. Subsequently, the line transitions to the packaging phase.

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Tedpfjwa Tqcox Aklja Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the Tjdpjvgt Upofx Aklea ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Tjdpfx Aovgutteklja Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, Used Isobaric Complete PET Line for Soft Drinks 6000 bottles/h Todpfevguyaex Aklja The line consists of: A Kosme KSB 4 L PET blow molding machine from 2004 with a speed of 6800 bottles/h for 0,5L, 6000 bottles/h for 2L, 5200 bottles/h for 2,5L Air conveyor from blowing machine to filler. MAS Mixer from 2004. MAS rinser, filler and capper from 2004, renovated in 2015, capacity 0,5l – 10.000 palack/h, 1,5l – 5000 units, rinser cranes – 32 units, filling valves – 32 units, cork heads – 8 units. BAT forum labeller type EBI 07 year 2006, capacity 1500-6500 units/hour, dimensions 2450x90x950-1300. BAR forum packer year 2005, capacity 12 packages/min. Conveyors, Cyklop International automatic stretch wrapper type GL215 year 2003, turntable 8 mm steel plate resting on 12 supporting rollers, feeder ramp 5 positions possible, power supply 230/440V, three-phase, 50Hz+Neutral; pallet load length/width max. diameter of 1675mm (*2000mm), pallet height – 2200mm (*2600mm), pallet weight max 1500kg (*2000 kg)