Used Cebora Plasmaprof 50 for sale (34,402)

Condition: new, Wilo MHI403-1/E/3-400-50-2/B pump, serial number: 4024295, unused, 100% functional, scope of supply as shown in the photos. Kjdpfezu Hxajx Andsna

Condition: new, Pneumatically operated chuck, clamping Ø 50 mm, manufacturer unknown, outer Ø 142/95/92 mm, inner Ø at connection 18.5 mm, unused, as new condition, 100% functional Knsdpfx Aezu Hakjndja

Condition: used, empty load weight: 16,200 kg, maximum load weight: 48,050 kg, overall weight: 64,250 kg, axle configuration: > 3 axles, first registration: 08/1976, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total length: 13,100 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, Kässbohrer axles, leaf suspension, forced steering, lashing rings, 2-piece loading ramps, front support. Bodywork: 750 mm ramp width, fifth wheel height 1550 mm, king pin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, overall length 13,100 mm. ACCESSORY DETAILS WITHOUT WARRANTY, subject to modifications, intermediate sale and errors excepted! Kodpfsxyzyisx Andjna

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total length: 13,100 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Ksdowh Uipopfx Andona

Condition: new, empty load weight: 6,400 kg, maximum load weight: 28,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,440 mm, loading space height: 2,000 mm, loading space volume: 51 m³, total length: 11,400 mm, total width: 2,500 mm, total height: 3,650 mm, suspension: air, tire size: 385/65R22,5, color: grey, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3-axle, BPW axles, air suspension, 1st axle liftable, ABS (anti-lock braking system), roller tarpaulin, catwalk, grain outlet, supports Body: Aluminum box body manufacturer Fudickar approx. 51.8m³ low pressure cylinder 190Bar, floor 7mm, side walls 30mm hollow chamber profile with 2.7mm inner wall thickness, front wall straight 4mm, rear wall as combination door (1/3, 2/3) with double bearing and steel frame incl. grain slider 400x400mm, replaceable rubber seal, saddle height 1,180-1,210mm, construction of the trailer like Langendorf! New vehicle from stock with daily registration on 08.06.2022! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! Ksdpfxevhhvqe Andjna - .

Condition: new, Year of construction: 2026, - Touchscreen control - Plate heat exchanger, stainless steel - Stainless steel pumps for recirculation and pumping Technical data: Tank capacity: 50 liters Production: 150 liters/hour (nominal production per hour with 35 °C ambient temperature, 18°C inlet water temperature, 3 °C target temperature, complete tank emptying) Knedpfxszuygks Andsa Cooling capacity: 2.8 kW (useful cooling capacity) Electrical power: 400 V, 50 Hz, 1.6 kW External dimensions: 700 x 735 x 1435 mm, 165 kg All prices are quoted excluding VAT. Delivery: ex works Syke (shipping via freight forwarder possible, costs to be borne by the customer) Payment: prepayment upon order We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes and errors.

Condition: used, Bomag BPR 50/55 D | Used Attachment - Other 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 2000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Plate does not start, according to the workshop master unknown engine damage, starter turns and compression present according to noise. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41268 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Kjdpfxjzvy Aze Andjna 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2020, operating hours: 1,877 h, load capacity: 5,000 kg, lifting height: 300 mm, fuel type: electric, Manufacturer + model: LINDE P 50 Tow tractor - 1F ID: 26060.6268 Knedezuuhcspfx Andea Category: Used Mast: 1F300 Lifting height: 300 mm Capacity: 5000 kg Year: 2020 Operating hours: 1877 hrs Battery voltage: 24 V

Condition: like new (used), Year of construction: 2020, operating hours: 1,670 h, load capacity: 5,000 kg, lifting height: 300 mm, fuel type: electric, Manufacturer + model: LINDE P 50 Tow tractor - 1F Ksdpfxozuug So Andsna ID: 26060.6269 Category: Used Mast: 1F300 Lifting height: 300 mm Capacity: 5000 kg Year: 2020 Operating hours: 1670 hours Battery: 24 V /

Condition: good (used), Year of construction: 2020, operating hours: 10,713 h, load capacity: 5,000 kg, lifting height: 3,850 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, Manufacturer + model:STILL RX 60 - 50 / 600 Mast:2W3850 ID:25011.6088 Cat.:Used Mast:2W Kodpfxozuubce Andona Forks:2400 mm Lowered height:2850 mm Lifting height:3850 mm Capacity:5000 kg Year:2020 Hours:10713 hours Capacity:80 v / 930 ah Options:- LINDE steering - Duo pedal!!! - New NON marking!!! - Windshield & Rear window!!!

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding Ksdpfjt Dmmvsx Andjna

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 11,000 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6x2 50 cm³ Combination TRS Refrigeration, 2 rear doors, 6,000 km, in excellent condition. Body: Refrigerated and freezer unit, Ebo Rhoon Tail lift: 2,000 kg Dhollandia under-ride platform Refrigeration: TRS Carrier Iceland, electric, temperatures from -30 to +30 Date of first registration: ? 2023 TÜV (technical inspection): Mileage: 6,000 km Engine power: 355 kW (483 hp) 13-liter Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3), 530 cm (axle 1 to axle 2) Loading area dimensions (L x W x H): 815 x 250 x 275 cm (internal) Truck dimensions (L x W x H): 1110 x 260 x 400 cm (external) Unladen weight: 13,812 kg Payload: 14,188 kg Permissible total weight: 28,000 kg Maximum front axle load: 9,000 kg GCW (Gross Combination Weight): 50,000 kg Emission standard: Euro 6 E Suspension: Front - parabolic, rear - air suspension Axle configuration: 6x2 (FAR) Front tires: 385/65 R22.5 L50% R50% Continental Axle 2 tires: 295/80 R22.5 L80% R80% Continental Knjdpfjzuitgex Andja Axle 3 tires: 385/65 R22.5 L40% R40% Continental Cab type: XG Extras: MX engine brake, auxiliary drive, climate control system, auxiliary air conditioning, auxiliary heater, 9-ton front axle, refrigerator, luxury radio, 2 air-suspended seats, 2 beds, 2 x 600-liter tanks, 130-liter AdBlue tank, lift axle (not a steering axle), predictive cruise control, B3 alarm system, wheelbase 530 mm (axle 1 to axle 2), rear overhang 2.90 m, 360° camera, 45° cooling, fully insulated body from Ebo Rhoon, 5 rails on ceiling and floor, 1 horizontal load securing rail, stainless steel bumper on body, LED lighting in body, TRS Iceland refrigeration with EcoDrive and start-stop function, 2,000 kg Dhollandia sliding rear door, pneumatic drawbar coupling, light and air connections, immediately available and ready for operation, complete maintenance history, etc. Can be delivered in combination with the following products: DRACO TIPPER EBO RHOON BOX TRS REFRIGERATED TRAILER 24 CC Body: Refrigerated/freezer unit, Martini EBO Rhoon Manufacturer and type of chassis: Draco MZS 218 Refrigeration: TRS Carrier Iceland including EcoDrive and start-stop system Date of first registration: 09 ? 2023 TÜV (technical inspection): - Dimensions (L x W x H): 760 x 250 x 290 cm (internal) Adjustable drawbar length: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg Permissible total weight: 18,000 kg Suspension: Air suspension Axle types: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg under-ride platform Tire size: 445/45 R19.5 Axle 1: L30% R30% Axle 2: L30% R30% Spare wheel for tipper trailer: 40% Additional equipment: Length-adjustable drawbar (40 cm), Dhollandia 2-ton tail lift, ABS, EBS, SAF axles with disc brakes, chassis with mount, wheel chocks, fully insulated EBO Rhoon, 5 stainless steel rails in floor and ceiling, 1 horizontal lashing rail in the side walls, TRS Iceland refrigeration with EcoDrive and start-stop system, temperatures from -30 °C to +30 °C (operation with 380 V or via the refrigeration unit of the tractor), attractive flat evaporator, various LED reversing lights, roadworthy, immediately available and ready for operation, suitable for 24-CC, 14-block or 18-Euro pallets, etc. Further information: * Payload: 14288 kg * Type | First axle: Continental R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 50% * Tire tread depth inner right | First axle: 50% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Continent

Condition: good (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Automatic Stacker S-3 Knsdpfx Aorp D I Iondja Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Knjdszu Ixnspfx Andsa Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Knedpfxezuz H Ss Andsa Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: used, Technical details: table diameter: 4500 mm faceplate diameter: 4500 mm operating hours: 0 h swing diameter: 5000 mm turning diameter: 5000 mm workpiece height max.: 2500 mm control: Sinumerik 840D SL x-axis: 300 Hub/ram Slide mm x-axis: 2850 Hub / ram travel mm x-axis: 2850 working without tool mm x-axis: 5000 with tool changer mm w-axis: 1800 Querwegelevating cross rail mm tool holder / places: 12 tool taper: HSK 100 (spindle) Kjdpfxju Ix H Ds Andjna workpiece weight: 100 t table speed: 1 - 50 U/min T-slots: 8 Stück (36 H12) stroke speed: fräsen ram speed: 4000 U/min rapid power traverse in X-and Z direction: 8000 mm/min Torque: fräsen: 100.000 Nm Torque: drehen: 200.000 Nm total power requirement: 80 (2x40) kW weight of the machine ca.: 140 t dimension machine approx.LxWxH: 11,5 x 6,6 x 8,4 m NEW CNC vertical turret lathe - manufactured upon official order and deposit. The photos shown are of a newly built machine that we delivered to a customer. (The photos are for illustrative purposes only.) Application of the manufacturing processes: Turning, such as external longitudinal turning, internal and external facing and profile machining. Grooving, such as internal and external Drilling, such as short hole drilling and deep hole drilling Milling, such as face-corner profile and T-slot milling Thread cutting But also suitable for roughing and end machining. The machine bed, designed with a welded construction, absorbs extreme cutting forces. The table is made of high-strength meehanite cast iron. To withstand heavy loads, the part weight is supported by two high-precision tapered roller bearings. Furthermore, the table is equipped with hydrodynamic support for the workpiece. other features: automatic tool change jaw chuck (8 pieces with power clamping spindle and hardened jaws) incl. cooling system 40bar with filter unit hydraulic and lubrication equipment ATOS and Dropsa with measuring system of axes Heidenhain Renishaw NEW - with guarantee & service via WWM AG *

Condition: used, mileage: 1,198,521 km, power: 427 kW (580.56 HP), first registration: 01/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,120 mm, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, spoiler, traction control, = Additional Options and Accessories = - Adaptive cruise control - Alarm system - Roof spoiler - Remote central locking - LED headlights - Leather interior - Alloy wheels - Air suspension - Microwave - Engine brake - PTO - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Parking heater - Stationary air conditioning = Notes = Scania S580 4x2 / 50 year edition. Full air suspension / 4-point air rear. Retarder. 2 x diesel tank, 950 liters + 550 liters. PTO. Alcoa wheels. Adaptive cruise control. Parking cooler. Parking heater. Microwave. Leather seats. Heated and ventilated driver seat. Air horns. Top bar with LED light bars and flashing lights. Knodpfozupdlex Andsa Recent major maintenance performed at a Scania dealer. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inside: 65%; Tire tread depth left outside: 65%; Tire tread depth right inside: 65%; Tire tread depth right outside: 65% Weights Unladen weight: 9,311 kg Payload: 12,689 kg GVW: 22,000 kg Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 01/2027 Identification Model number: S580 V8 4x2 / 50 YEAR EDITION / = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Cummins KTA38-G2, General information Field of application: Construction Weights Empty weight: 13.910 kg Functional Generator capacity: 1.100 kVA Dimensions of cargo space: 606 x 245 x 290 cm Other information Fuel consumption: 128 Liter per Hour at 75% Load at 50Hz Generator: Stamford S6L1D-E41 Frequency: 50/60 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1200 l Production country: CN Additional information Please contact Team DPX for more information Kedpfxjy T Uwqe Andona = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Switchable 50Hz and 60Hz Standby power: 1125kVA at 60Hz, 1000kVA at 50Hz Control to client's specification. Control panel in pictures can differ from stock unit. Stock is DSE 8620 MKII

Condition: good (used), functionality: fully functional, *Description* Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm - *Square bar*: 40 x 40 mm - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm Kedozt Swlspfx Andjna *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Sold with punches. Heavy weight, mounted on a steel base.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6941, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Kjdpfx Anszvn Hzsdena Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Knsdpfjzuur Uox Andoa Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Kjdpfszvby Isx Andena Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,078 h, load capacity: 5,000 kg, lifting height: 2,980 mm, fuel type: electric, mast type: simplex, construction height: 2,400 mm, fork carriage width: 1,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Refurbished, no warranty Technical condition: very good Knodpezup Iwofx Andja Front tire type: Superelastic Front tire size: Brand new Front tire condition: New Rear tire type: Superelastic Rear tire size: Brand new Rear tire condition: New Battery voltage: 80V Battery capacity: 930Ah Battery type: PzS Battery year of manufacture: 2020 Description: Overhauled, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof protection, windshield.

Condition: used, mileage: 240,000 km, power: 80 kW (108.77 HP), first registration: 05/2016, fuel type: diesel, overall weight: 5,000 kg, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, loading space length: 3,300 mm, Equipment: air conditioning, navigation system, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales advisor. Attention!!! Preferred sale to business customers only Internal ID Number: [3208] ----Optional add-ons: * 12–64 months warranty (valid throughout the EU) * New inspection * New MOT & emissions test * Nationwide delivery * Financing possible with or without down payment ----Vehicle highlights: * Regularly serviced * German vehicle * One previous owner * Immediately operational * Euro 5 standard * High roof, long wheelbase panel van * Cruise control * Air conditioning * Bluetooth multimedia function * Rear-view camera * Tow bar = 3,500 kg towing capacity Special equipment: Driver/passenger airbag, audio navigation system RNS 6000 (front speakers), electrically adjustable and heated exterior mirrors, wooden flooring in cargo area, suspension package B, lockable glove compartment, adjustable steering column (steering wheel), passenger double seat in cabin, high wood interior trim in load/passenger area, lashing rails in cargo area - on floor, side wall, and roof frame Additional equipment: Storage tray/compartment above windshield, driver airbag, traction control system (ASR), rear entry handle on right rear post, driver assistance system: brake assist (HBA), digital tachograph, windshield with sun strip at top, rear wing doors without glazing, driver's cab interior lights: 2 reading lamps in front, body/variant: high standard panel van, high-roof variant, fuel tank: 75 liters, full-height partition in cargo area without window, model update, engine: 2.0 l – 80 kW TDI, parking light switch, wheelbase 3,665 mm, tire repair kit, low emission as per Euro 5 standard, right-side sliding door for cargo/passenger area, upholstery: fabric, driver's cab seats: adjustable driver's seat, gross vehicle weight 5.00 t, additional brake light ----Interested in leasing or financing? We offer attractive options – even without down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Kedeyr U U Espfx Andjna Sat: 9:00 am – 2:00 pm ----Notice: All details online are non-binding and serve solely as general vehicle descriptions. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is determined exclusively by the purchase contract signed on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our business customers.

Year of construction: 1999, condition: used, Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible. Knedpszuzzisfx Andja