Used Centauro Bandsaw/ Resaw for sale (477)

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material Godpfx Aaod Iipmogobn 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: Gjdpfx Aaofgyicjgobn *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Godpofg E Hljfx Aagobn Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t Gjdpfsfd Abasx Aagjbn dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: new, cutting diameter 255 mm saw band length 2765x 0,9 x 27 mm Godpfx Aaofn Andogebn cutting width 300 x 180 mm turning speeds 35 + 70 U/min total power requirement 1,8 kW weight of the machine ca. 450 t dimensions of the machine ca. 1,7 x 1,23 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 105 mm capacity 90 degrees: square 100 mm 100 x 105 dimensions of saw-band 1335 x 13 x 0,65 mm dimensions 650 x 310 x 300 m band speed 30 - 80 m/min total power requirement 0,95 kW weight of the machine ca. 18 kg Action Price!! Berg & Schmid - assembly band saw PBS 90 ESC Powerful and particularly robust metal band saw with Die-cast aluminum saw table and stepless cutting speed for Miter cuts up to 60° Gbjdpfx Aefv Aq Roagon Share of freight costs: EUR 25.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. Godpfxofg E Hps Aagobn • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm Gsdpfx Aajd Iiptjgobn band speed 37 + 74 m/min table height 940 mm total power requirement 1,8/2,2 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,5 x 1,78 x 1,3 m ACTION PRICE !!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • miter left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Best access to the material • Ammeter to check a. - Optimization of cutting force - Tape life - cutting course • Vise closes/opens hydraulically • Chip removal brush • Material turntable with ball bearings b. • Adjustable quick-release c. • Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, capacity 90 degrees: round 250 mm capacity 90 degrees: square 210 mm 290 x 210 mm saw band length 2.965 x 27 x 0,9 mm mm table height 940 mm band speed 35 / 70 m/min total power requirement 1,1/1,3 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,3 x 0,8 x 1,5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height button - Cut monitoring by ammeter - Cutting pressure feed regulator Godpfsd Iip Rex Aagsbn - Belt speed 34 / 74 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing turntable for easy miter adjustment - Adjustable quick-release vise - Quick release lever - Automatic cooling Share of freight costs 120 EUR

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Bandsaw MACC SPECIAL 411 CSO, year 2019 Condition: very good - Sawing machine with cutting band falling controlled by hydraulic - Vice closure operated manually - Manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Blade tensioning obtained per manual rotation of the handwheel and guaranteed by microswitch - Vice with device for quick approach - Accident-preventing devices on flywheel casing, on control handle, on blade, and external guard Gbodpfxspmaubo Aagsn - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable end stop for cuts of the same size - 24 V low voltage control - 0,06 kW power-driver pump for band cooling - Pedestal with chip collection tray and removable tank for coolant - Inlet conveyour

Year of construction: 1998, condition: good (used), Maximum width of the workpiece 410 mm Gsdpeigwcnjfx Aagobn Maximum height of the workpiece 410 mm Saw speed 10> 200 m / min Band saw length 41 x 1.1 x 5940 mm 8.7 kW power required Weight 4 tons Characteristics: - Torque Control: measures the torque required for the cutting operation. If the load is excessive, it immediately interacts with the hydraulic circuit to reduce the feed rate to optimal cutting conditions in relation to the cross-section of the material and the condition of the saw blade. - System 9000: allows the operator to select the cutting speed (feed motion) depending on the type of material being cut. At the same time, the feed speed (entering the material) adjusts automatically to generate the optimal chip thickness. Nevertheless, the operator has the option of adjusting the production rate to a specific application by increasing or decreasing it. - The efficiency of the devices mounted on the deb series machines allows the maximum use of the blade capabilities without exceeding them, which translates into long-term productivity and precision. Compucut PLC control

Condition: good (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 300 mm, cutting width (max.): 360 mm, overall weight: 780 kg, table height: 300 mm, cutting range round steel at 45°: 265 mm, cutting range round steel at 90°: 303 mm, cutting speed: 90 mm/min, Sawcapacity at 90 degree: Round: Ø303 mm Square WxH: 360 x 305 mm Sawcapacity at 45 degree: Round: Ø265 mm Square WxH: 265 x 300 mm Sawcapacity at 30 degree: Round: Ø175 mm Square WxH: 175 x 300 mm Sawingspeed: 20 - 90 m/min. Sawbelt dimensions: 3830 x 25 x 0,9 mm / 3850 x 27 x 0,9 mm Workingheight: 700 mm Featured with: - Mitre sawing - Half automatic Gjdpfjyac Uijx Aagebn - Materialrollerconveyor ca. 8 meter - Machine manuals Country of origin: Germany Motor power: 1,1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

Condition: used, Infeed mechanization Gjdpoyxywtefx Aagsbn TWIN double-frame sawmill edger Blade diameter: 120 mm

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads Gbodpfxevwbg Uj Aagjn 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2025 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm * same as new *

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW weight of the machine ca. 440 kg Basic equipment: Gbodpfofg E H Nox Aagjn Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Gbedpfx Aeyvzvxsagsn Model Shark 320 AXI Year : 2002 Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min.

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Gbsdpfx Asm Rhfdsagon

Condition: good (used), Year of construction: 1985, range L-W-H 400x300x200 mm saw diameter 420 mm Gbjdpfxsvf N Sus Aagon weight of the machine ca. 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm.

Condition: good (used), Year of construction: 1995, range L-W-H 3,50/2,40/2,20 mm weight of the machine ca. 3500 kg Godpfew N S Ecox Aagsbn Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm

Condition: new, Semi-automatic bandsaw with double-sided mitre cutting R/L 60° including hydraulic blade tension indicator Option for retrofitting minimum quantity lubrication Gedod Dpzgepfx Aagsbn Cutting capacity 90° round 280 mm / flat 410 x 280 mm / square 280 mm 45° right round 280 mm / flat 310 x 150 mm / square 270 mm 45° left round 280 mm / flat 330 x 100 mm / square 280 mm 60° right round 210 mm / flat 205 x 100 mm / square 190 mm 60° left round 220 mm / flat 225 x 100 mm / square 210 mm Material support height 756 mm Saw blade dimensions 3800x0.9x27 mm Cutting speed 20-120 m/min Drive power 2.2 kW Dimensions LxWxH 2130 x 1070 x 1440 mm Weight 530 kg Price on request

Year of construction: 2006, condition: excellent (used), Fly wheel diameter : 800 mm Engine size : 4 Kw Tilt of table : 0 - 45 degree CoMaFer feeder with adjusteble speed, rubber feed wheel ( Year 2020 ) Maximum cutting hight : 680 mm Maximum cutting width : 750 mm Gbsdpfjlk Ilyex Aagen Machine measures : L 1400 x W 1000 x H 2700 mm Request live video presentation on WHATSAPP

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. Gedpfx Aastqfv Iegjbn The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: new, Year of construction: 2025, functionality: fully functional, saw band length: 4,242 mm, High-performance fully automatic band saw in robust double-round column design and full enclosure. Developed for the highest sawing requirements. Technical Data: Cutting range Ø 325 mm or 380 x 325 mm Saw blade dimensions 4242 x 34 x 1.1 mm Saw drive 3.75 kW Working height approx. 820 mm Weight 2200 kg Connection 400 V-50 Hz Including technical features: - Smart NC control with 5.7" HMI touch screen for up to 100 different programs - V-Drive - Mitsubishi PLC control - Display of improper operation in plain text - Frequency-controlled saw drive 15–100 m/min - Material database for easy setting of cutting parameters - Digital display of saw feed rate in mm/min and cutting performance in cm²/min - Display of saw frame position in mm - Automatic cut-in, selectable with or without front cut. Length of the front cut is freely programmable - LED strip work light Gbodpfjbrxk Uox Aagen - LED signal tower for visualizing machine status - Automatic band guide arm positioning - Vibration damping roller for vibration-free sawing - Hydraulic, adjustable chip conveyor - Clamping pressure regulation for both vices - Hydraulic saw blade tensioning with band breakage monitoring sensor - Coolant device with additional cleaning nozzle - Saw cut detection via rapid advance button - Manual material positioning with slow-motion function - Automatic cutting pressure regulation, pre-settable based on material quality - Material retraction after completion of cut to protect the saw blade during upward movement - Integrated material support on the infeed side, approx. 1,500 mm - Discharge table with coolant return, approx. 500 mm

Condition: used, functionality: fully functional, Band Saw Blade Sharpener PERFECTA Godpfx Aaeyy Sdbogsbn Specification: • condition - used, after maintenance • manufacturer - PERFECTA • 0.75 kW motors (3-phase) • grinding angle adjustment range 0-10 degrees • original paintwork • body dimensions - 50 x 50 x 130 cm (width x length x height) Additional information: • the machine is in good technical condition, ready for immediate use • the displayed photos show the actual condition of the sale item • possibility to turn on and test the device on site • the auction price does not include VAT or transport costs Financing and transport: • we organize transport via MDD fleet, courier companies, or external carriers • we offer financial support in the form of leasing or lease loan

Condition: used, functionality: fully functional, Band Saw Blade Sharpener OSAMA Specification: • Condition – used, after inspection • Manufacturer – OSAMA • Motors with 0.75 kW power (3 phase) • Grinding angle adjustment from 0 to 15 degrees • Original paintwork • Body dimensions – 50 x 50 x 130 cm (width x length x height) Gbedpfxjyy Nqxe Aagen Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on site • The price listed in the auction does not include VAT or transport costs Financing & Transport: • We organize transport via MDD fleet, courier companies, or external carriers • Financing options available in the form of leasing or lease credit