Used Cesab B420 Ii for sale (2,565)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 6229, Offer 24483 Technical data: Nwjdpfx Aiou Eq Rps Tsn - max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle setting preselectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - of the bending beam 50 mm - of the lower beam 50 mm - E. foot switch - Upper beam drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t Nodpomi Rpiofx Ai Town

Condition: used, STC Film Wrapping machine, Nwodpfx Aoc Nlxrji Ten Machine used for packing champignon. Capacity 40-80 pack/min.

Year of construction: 1999, condition: used, Demag KBK 2 - crane sky crane runway Please ask your crane track according to your measurements. Payload / load lifting 80-125-250-500 up to 1000 Kg Technical data of the plant: Profile Demag KBK 2 rails Also available as monorail with elbows and points! Mounting height variable System can be supplied complete KBK rails, rail connectors, chassis, end plates, cable chain, holder / hanger etc. Optional all chain hoists are available Due to the low weight Taken assembly in lightweight construction / wooden buildings or older buildings is possible. Very good used condition Rails available in yellow or red! Shipping preferred possible pickup by freight Demag KBK1, KBK2L, KBK2 and KBK3 rails are in stock! Contact Person: Mr. Goepferich Nodpfx Asct Dhaei Tjwn info ÄT mobatgg . de

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm Nwjdpfxoy Np Ae Ai Ton

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,500 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 1,500 kg, total height: 24,920 mm, total length: 43,670 mm, total width: 30,700 mm, table length: 1,600 mm, table width: 700 mm, spindle motor power: 11 W, rapid traverse Z-axis: 24 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle nose: Iso 40, spindle speed (max.): 8,000 rpm, spindle speed (min.): 40 rpm, tool diameter: 75 mm, tool length: 250 mm, Equipment: documentation/manual, rotational speed infinitely variable, NEW vertical machining center "AWEA BM-1500 II" with FANUC 0i-MF Plus CNC Accessories present: 4th axis interface Air blow system Left side auger chip conveyors Coolant through spindle ( CTS ) at 20 bar Nwedjrkn Iispfx Ai Tsn Coolant gun Fairing bottom washing system 500 liter refrigerant collection tank Automatic power-off system Alarm light & work light

Condition: refurbished (used), functionality: fully functional, load capacity: 16 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Nwsdpfx Ajrqgb Ioi Tsn Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: used, Floor cleaners, floor preparation products, floor coating -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list Nwjdpfx Aisqyi Une Ten -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Year of construction: 1988, condition: used, tool adaptor SK 40 weight 165 kg Type Uni. 0 Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315. Nsdpfx Aoipyx Eji Tewn

Year of construction: 1994, condition: good (used), -Cutting mill / granulator -working width: 600 mm -rotor diameter: 400 mm -with sound insulation Nwsdpfx Ash Havtoi Tjn

Condition: excellent (used), Table milling machine SCHNEIDER Type SK 2/4 II with Holz-Her feed system with sliding table Nwodpfxjgk Ui Eo Ai Ten

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Nwedsd Rcigopfx Ai Ten Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Year of construction: 1995, condition: used, machine/vehicle number: 20225, Color: green Slighty used! DIN 1415 Nsdpfx Aebrcmfji Tjwn Impetus electromechanic

Condition: used, Year of construction: 1986, x-travel 1050 mm y-travel 560 mm z-travel 510 mm table-size 1200 x 560 mm spindle taper ISO 50 turning speed range 15 - 4000 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid motion -longitudinal/cross/vertical 10 m/min distance spindle nose and table 150 - 660 mm distance spindle center to column max. 650 mm table load max . 1 t no. of tools in magazin 24 tool diameter 110 mm workpiece length 350 mm weight of tools max. 15 kg spindle drive 7,5 kW control FANUC 11 MA total power requirement 13 kW Nedpfx Aijtqqvyj Tswn weight of the machine ca. 9,3 t dimensions of machine L x W x H 3,55 x 2,64 x 2,68 m

Condition: used, Year of construction: 2023, Equipment: compressed air brake,

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins Nodpfx Aieunrwno Town SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Condition: excellent (used), Year of construction: 2018, CNC Lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Nodpfx Aisylhmuj Tewn Internal machine no.: 19 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Spindle speed: 45 – 5,000 rpm Tool turret: 12 stations (driven) Tool holder: BMT 65 Spindle bore: Ø 72 mm Equipment: Chip conveyor Parts catcher Touch setter Programmable sub-spindle One Touch IGF 3-jaw power chuck Kitagawa Various driven and static tools

Condition: used, mileage: 126,000 km, power: 280 kW (380.69 HP), first registration: 01/1997, fuel type: diesel, empty load weight: 21,915 kg, maximum load weight: 4,085 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x6, wheelbase: 5,230 mm, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, cable winch, crane, differential lock, power assisted steering, seat heater, Vehicle location: Bovenden, mtl. house, 1x comfort seat, seat heating, rear window, sun visor, EPS, switch 16, ABS (anti-lock braking system), retarder, auxiliary drive, exhaust raised, central lubrication system, differential lock, work lights, rotating beacon, storage box, cable winch, leaf suspension, lateral aluminum driving protection, crane at rear, high seat, 4-point hydraulic support, 1x hydraulic extension Wheelbase: 5230 mm Body: Recovery vehicle with crane, 4-point support, lifting goggles and 2x cable winch, differential lock front and rear axle, ABS, Voith secondary retarder R115 high drive, rear springs stronger level I, additional sound insulation, reinforced clutch, brake pad wear indicator, automatic daytime running lights, radiator guard at the bottom, flame system, engine brake with constant throttle, central lubrication, FDS, 15.1 l engine! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Nedpfx Aiovhl Udo Tjwn

Condition: used, mileage: 126,000 km, power: 280 kW (380.69 HP), first registration: 01/1997, fuel type: diesel, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x6, wheelbase: 5,230 mm, brakes: retarder, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, power assisted steering, seat heater, Vehicle location: Bovenden, mtl. house, 1x comfort seat, seat heating, rear window, sun visor, EPS, switch 16, ABS (anti-lock braking system), retarder, auxiliary drive, exhaust raised, central lubrication system, differential lock, work lights, rotating beacon, storage box, leaf suspension, lateral aluminum driving protection Nwedpfxovhn S Ej Ai Ten Wheelbase: 5230 mm Differential lock front and rear axle, ABS, Voith secondary retarder R115 high drive, rear springs stronger level I, additional sound insulation, reinforced clutch, brake pad wear indicator, automatic daytime running lights, radiator guard below, flame system, engine brake with constant throttle, central lubrication, FDS, 15.1 l engine! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, spindle speed (max.): 3,200 rpm, overall weight: 6,500 kg, controller model: U-10L, TECHNICAL DETAILS Maximum turning diameter: 210 mm Maximum turning length: 500 mm X-axis travel: 155 mm Z-axis travel: 520 mm Spindle speed: 3,200 rpm MACHINE DETAILS Control system: U-10L Dimensions & Weight Dimensions (L x W x H): 2,700 x 1,900 x 1,700 mm Total weight: 6,500 kg Nwsdpoy S Sytofx Ai Tsn EQUIPMENT Documentation/Manual Adjustable spindle speed Parts catcher Touch probe V12 turret VDI 30 (all powered) Manual tailstock Chip conveyor Coolant pump Bar loader Samsys MUS-3000, year 2007 SMW chuck KNCS-N210-52

Condition: used, max. load . kg 0 . 0 weight . kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us Morehe tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Nodjzkvvajpfx Ai Tswn If than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2008, operating hours: 17,000 h, functionality: fully functional, ## 2008 Star SR-20RIII – 20 mm CNC Sliding Head Lathe Seven controlled axes | Twin spindles | Driven tooling | FMB magazine bar feeder | 140-bar coolant Available from Swiss CNC, this 2008 Star SR-20RIII CNC sliding head lathe combines 20 mm machining capacity, twin spindles and driven tooling for the production of precision components from bar. Equipped with FANUC Series 300iS-Model A CNC control, it offers versatile turning, milling, drilling, tapping and back-working capability. The sliding head and guide bush arrangement supports the material close to the cutting point, making the machine particularly suited to small-diameter and slender components. C-axis control on both spindles allows accurately positioned machining features, while the opposed sub-spindle enables rear-face finishing and secondary operations within the same machine cycle. Independent front- and back-working capability allows operations to overlap where the component and programme permit, helping reduce cycle times and the need for additional handling between machines. ### Technical specification | Specification | Details | |---|---| | Manufacturer / model | Star SR-20RIII | | Year of manufacture | 2008 | | Maximum machining diameter | 20 mm | | Maximum headstock stroke | 205 mm | | Controlled axes | Seven: X, Y, Z, XB and ZB, plus C-axis control on both spindles | | Main spindle speed | Up to 10,000 rpm | | Sub-spindle speed | Up to 8,000 rpm | | CNC control | FANUC Series 300iS-Model A | | Rapid traverse | Up to 35 m/min | | Approximate machine weight | 2,200 kg, excluding bar feeder and ancillary equipment | ### Standard tooling layout - Six turning-tool positions for external turning, profiling, grooving and parting. - Five radial driven-tool positions for cross-drilling, milling and tapping applications. - Four front-working sleeve positions for end-working operations. - Four-position back-working station for machining components held in the sub-spindle. ### Included equipment - FMB Turbo 3-36 automatic magazine bar feeder for 3.2 m bar stock. - 140-bar high-pressure coolant system — approximately 2,000 psi. Nodpfxez Uxmbo Ai Tjwn - LNS MH500 swarf conveyor, compatible with long-parts ejection. - JBS guide bush system. - TriMist Extraction - Noble fire suppression system. The combination of magazine bar feeding, high-pressure coolant and swarf handling provides a useful equipment package for repeat batch production and components requiring several machining operations. ### Machine hours Approximately 56,000 power-on hours. Cutting hours - 17,000 Available in the UK. Price on application, plus VAT. Contact Swiss CNC for pricing, machine videos, inspection arrangements and delivery or installation requirements. *Tooling layout describes the standard model configuration; the supplied toolholder package is subject to confirmation.*

Condition: used, axle configuration: 3 axles, first registration: 04/2005, total length: 13,600 mm, total width: 2,520 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 10,250 mm, color: blue, Equipment: ABS, 3 x steering axles. Saf axle with drum brakes. 795 cm extendable. Total length: 1360 cm - 2155 cm. Twist locks. = Further information = Axle configuration Tire size: 385/65R22.5 Brakes: Drum brakes Nsdpfe Adyinjx Ai Tswn Suspension: Air suspension Rear axle 1: Steered; Tire tread depth left: 75%; Tire tread depth right: 75% Rear axle 2: Steered; Tire tread depth left: 75%; Tire tread depth right: 75% Rear axle 3: Steered; Tire tread depth left: 75%; Tire tread depth right: 75% Weights Unladen weight: 10,260 kg Payload: 31,740 kg GVW: 42,000 kg Identification Type number: OVB-42-03V / 3 x STEERING AXLE / = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2008, Citizen A20 VIIPL CNC Swiss Multi-tasking Turning Centre. S/No. ACO 118 (2008). Country of Origin: Japan, Maximum Spindle Speed 10,000rpm, Ø10mm Maximum Drilling on Main Spindle with Iemca Smart 320 Type 32 LL Automatic Bar Feeder, Ø3-20mm Capacity. S/No. 020805RA01 (2008) Country of Origin: Italy Location: This lot is located in Birmingham, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Nwodpfx Ae Afncxei Ten

Condition: used, Year of construction: 2018, -i-Preparation + Steering system preparation -AT-Activation -Electrically adjustable and heated exterior mirrors -Premium LED lighting package -ProDrive automatic transmission, 40 km/h, with all-wheel drive -Advance Header Control (AHC) -Automatic PTO coupling for harvesting attachment -Dura Line Ultimate -Automatic central lubrication system -Dura-Drum cutter bar with 56 blades -Tungsten carbide-coated blade holders -Grass channel with DuraLine crop processor -Semi-automatic drawbar coupling -MyJobConnect -Exterior mirrors for improved downward visibility -Rear view camera -Premium service lighting -LED all-round lights -Cooler box -Windshield wipers with washer system for side windows -Mounting rail for display -High-performance drive for harvesting attachment -Air compressor kit -Container and dosing system for silage additives + ADS-TL Nodpfx Ao Afklpji Tswn -Stone detection system -Additional covers and seals for the pre-compression rollers -Electric adjustment of the crop processor’s gap -Crane for crop processor -40% speed difference -Preparation for automatic discharge chute positioning -Discharge chute, Holland version, with camera -ProTouch Road/Field -Active Fill Control (AFC) -2 wheel chocks -Chrome exhaust pipe MAS130450 incl. Kemper 460 Plus MAS130690 -Year of manufacture 2018 Price applies to the existing condition. Offer subject to change. Errors, modifications and prior sale reserved. All information without guarantee.