Used Cevisa Chp 10 for sale (29,823)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) Hfsdpfxjg Ailcj Abfek COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Year of construction: 2003, condition: ready for operation (used), Six Arburg injection molding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 4000mm/2300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90769h, clamping force: 1000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2470bar, shot volume: 106cm³, centering: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions X/Y: 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions X/Y: approx. 4700mm/2350mm. Including Multilift handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2340bar, shot volume: 30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2500bar, shot volume: 31cm³, centering: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions X/Y: 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions X/Y: approx. 3750mm/2400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2500bar/2340bar, shot volume: 20cm³/30cm³, centering: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions X/Y: 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions X/Y: approx. 3300mm/1100mm. Documentation available. An on-site inspection is possible. Hjdpfx Aetyyn Hjbfefk

Year of construction: 2003, condition: ready for operation (used), Bar diameter range: 10mm-65mm, max. bar length: 3200mm, feed force: 550N, machine weight: approx. 2800kg, operating hours: approx. 60000h. Documentation available. An on-site inspection is possible. Hedpfx Absy Ax Tuofsfk

Condition: ready for operation (used), Year of construction: 2007, A Haulotte mast lift is available. Working height: 10m, platform height: 8m, outreach: 3100mm, load capacity: 200kg, max. side force indoors/outdoors: 40kg/20kg, slewing range: 345°, max. inclination: 3°, basket dimensions X/Y: 680mm/930mm, lifting mast: 4950mm, max. wind speed: 45km/h. Machine dimensions X/Y/Z: 2700mm/1000mm/2000mm, weight: approx. 2800kg. An on-site inspection is possible. Hedpfx Absy Dupusfjfk

Year of construction: 1998, condition: ready for operation (used), An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available. Hfodpfx Abotq U A Isfjk

Condition: ready for operation (used), A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible. Hedpfx Aewixzxebfjfk

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Hedpfx Aow Hglmobfefk

Year of construction: 1995, condition: ready for operation (used), Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible. Hfjdpfjvnuckjx Abfok

Condition: ready for operation (used), Year of construction: 2012, A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000kg, max. lifting height: 760mm. 6) Vacuum tube lifter J. Schmalz Jumbo Sprint 45-Zent, year of manufacture: 2003, load capacity: 45kg, max. lifting speed: 60m/min, max. lift: 1800mm, suction cup diameter: 110mm, lifting column inner diameter: 140mm, length: 2550mm, gripper height: 112mm, suction cups: 4, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Hfjdpfx Ajx I Rqvsbfjk

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep, which was used in the food industry, is available. Nominal output: 10000bottles/h, running direction: LM, control range: 2000-12000bottles/h, gluing height 1/2: 330mm/230mm, bottle format height 1/2: 307mm/260mm, bottle format diameter 1/2: 90mm/68mm, bottle material: glass, bottle type: VDF/NRW, bottle volume: 1000ml/500ml, application: body label/neck label/back label, container condition: hot. Cold-glue format 1: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/320mm. Cold-glue format 2: label length range: 25mm-140mm, max. label height: 150mm, label height lower edge/upper edge: 15mm/220mm. Including two cold-glue units, dating, sensor label inspection, breakage detection, overload clutch, additional accumulation switch and center slide. Documentation available. An on-site inspection is possible. Hfsdpfx Abjy N Dfpsfok

Condition: ready for operation (used), Year of construction: 2004, Bottle format: 0.33l Steinie, throughput: 12,000 bottles/h, number of capping stations: 14, control system: Siemens SIMATIC PANEL, on-site inspection is possible. Hfsdporu Hvmjfx Abfek

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Hodet R Tq Ijpfx Abfjfk

Condition: ready for operation (used), Year of construction: 2022, An oil-lubricated screw compressor AiRKO is offered. Motor power: 7.5kW, Motor speed: 3000rpm, Volume flow: 1.02m³/min, Max. operating pressure: 10bar. Viewing possible by prior arrangement. Hjdpfx Abjzlkapofsfk

Condition: ready for operation (used), Year of construction: 2020, A poultry cone cutting line from Westerhoff Geflügeltechnik GmbH is available. Number of operators: 10, cutting cones: 40, max. throughput capacity: 1000pcs/h, length: approx. 11000mm, width: approx. 2000mm. Including a platform for the operators. An on-site inspection is possible. Hodpfxozcyrke Abfefk

Condition: ready for operation (used), Max. bar length: 3200mm, remnant length: 500mm, feed speed: up to approx. 700mm/s, return speed: approx. 700mm/s, power consumption: approx. 1.5kW, with wiring diagram. A special feature is that the loader advances the bar to the desired length and does not require a machine stop. The remnant is also discharged from the machine into the loader remnant container. An on-site inspection is possible. Hjdpfx Abjy D Tn Asfjfk

Year of construction: 1968, condition: ready for operation (used), A vertical large-format vertical turning lathe TOS is available. Turning diameter cross rail support/side support: 1150mm/1000mm, max. workpiece weight: 3000kg, max. workpiece height: 900mm, travel X/Y/Z: 500mm/500mm/750mm, table diameter: 1000mm, max. table torque: approx. 8800Nm, machine dimensions X/Y/Z: approx. 2600mm/2700mm/4000mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Expected to be available from Q3 2026. Hfedpeyifltjfx Abfjk

Condition: ready for operation (used), Year of construction: 2009, A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible. Hodpfx Aeyv H Iyobfefk

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Hodpfxeztl Udo Abfsfk

Condition: ready for operation (used), Year of construction: 1965, Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible. Hedpfx Abozukthjfsfk

Condition: used, 10 pieces of carbide cutting inserts, HM cutting inserts, indexable inserts WIDIA Cutting insert with chip guide and cylindrical bore Type DNMM 150 612 TK15 Nominal size: 15 mm Cutting radius: 1.2 mm Rhombus angle: 55° Insert thickness: 6.35 mm Dimensions according to the sketch: D = 12.7 mm L10 = 15.5 mm = edge length of the rhombus Hfedpfjzugqpjx Abfek S = 6.35 mm = insert thickness R = 1.2 mm = cutting radius D1 = 5.16 mm = cylindrical clamping bore 10 pieces = 2 packaging units, each with 5 inserts There are 160 packaging units available. The price quoted refers to 2 packaging units.

Condition: used, empty load weight: 6,969 kg, maximum load weight: 32,377 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 04/2019, next inspection (TÜV): 10/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, loading space volume: 101 m³, total length: 13,620 mm, suspension: air, tire size: 435/50 19,5, tire condition: 50 %, color: blue, Year of construction: 2019, front tire size: 435/50 19,5, rear tire size: 435/50 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, sale and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained staff, we will be happy to advise you. Reference no. for inquiries: 40683 Schmitz, SCS * Year of manufacture: 2019 * ABS, Anti-Lock Braking System * EBS, electronic brake system * Air suspension * Plain tarpaulin * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * Lifting roof, mechanical * Portal door * Air connection coupling head (red + yellow) * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering device * Ferry lashings * Storage box/toolbox * Galvanized * Tarpaulin new * Inspections: HU / AU 10.2026 * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,969 kg * Payload: 32,377 kg * Permissible gross vehicle weight: 39,346 kg * Tire condition, 1st axle: 50% -- 50% - Tire size: 435/50 R19.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 435/50 R19.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 435/50 R19.5 * Tire sizes: 435/50 R19.5 * Internal dimensions: L=13620 mm, W=2480 mm, H=3000 mm * Internal volume*: 101 m³ * Pallet spaces: 34 * Speed curtain, 1 side Disclaimer: Subject to changes, prior sale, and errors. More images and videos can be found on our homepage. Our extensive range of services includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you. Hjdpfsy Tttwox Abfefk

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 12 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,263 kg, empty load weight: 737 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,735 mm, loading space height: 1,800 mm, Price on request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. *Leasing/hire purchase possible. 3 units in stock, RAL 7043 2 units in stock, RAL 5010 5 units available in the short term, RAL 7043 Other versions and sizes available from the Paderborn warehouse. You can view our warehouse stock on our website. Skip containers according to DIN Technical description: * Internal dimensions: 3735 x 1720 x 1800 mm * Useful volume: 10 cbm * Unladen weight: 737 kg * Floor: 5 mm S235 * Sides: 3 mm S235 * All sheets and profiles continuously welded * Asymmetrical * Container tested and approved according to DGUV Rule 114-010 * Corner reinforcements * Double-sided 3-point tilting bearing (bolt Ø45) * Stacking rail, L-profile * Securing rail * Frame edges U 80x50x4 * Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) Hsdpfx Ajzi Udmobfofk * Permissible total weight 10,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 5 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,092 kg, empty load weight: 908 kg, loading space volume: 10 m³, loading space width: 1,720 mm, loading space length: 3,875 mm, loading space height: 2,000 mm, Price upon request. The price is valid ex warehouse, 33106 Paderborn! Quantity discounts are possible when purchasing multiple containers. Europe-wide delivery is possible by arrangement. Leasing/hire purchase options are available. 3 units are available on short notice; other RAL colors are available upon request. Other designs and sizes are available ex warehouse Paderborn. You can view our stock on our website. Hsdpozi Uc Aofx Abfofk Skip container according to DIN standard Technical description: * Internal dimensions: 3875 x 1720 x 2000 mm * Usable volume: 10 cbm * Tare weight: 908 kg * Floor: 5 mm S235 * Sides: 3 mm S235 * 2 steel lids, torsion bar spring, can be lifted vertically * All sheets and profiles are continuously welded * Asymmetrical * Container tested and approved according to DGUV rule 114-010 * Corner reinforcements * Double-sided 3-point tilting bearing (bolt Ø45) * Stacking rail, L-profile * Securing rail * Frame edges U 80x50x4 * Zinc phosphate primer inside and outside, painted externally with synthetic resin paint (80-100 μ) Errors and prior sale excepted. Photos are for illustrative purposes only! The price is per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer Hfjdpfx Asygtbasbfok -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 6520/2500/H755 mm -Load capacity: 20 t -Tires: Solid rubber dual tires, 8 pieces, 405/130-305, see photos -Overall dimensions: 8020/2500/H755 mm -Transport dimensions: 6520/2500/H755 mm -Weight: 2640 kg

Condition: good (used), Year of construction: 1987, pressing force: 1,250 t, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 Hodpfx Asztp Tdsbfjfk - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm