Used Crocodile Shear for sale (1,595)

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Lhjdpfjihf Ufex Agrsl Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

Condition: good (used), functionality: fully functional, We are offering our used sheet piling shear for sale. This machine was developed and built by us in the past for cutting sheet piles to size. The machine is in good working condition and is still in use. However, as we currently have very few projects that require this machine, we have decided to sell it. Optionally, the associated racking system for storing the sheet piles can also be included. The suction cup that is currently attached can also be included. However, the suction cup is not currently functioning properly; the problem is likely in the mechanism. Also, the remaining stock of sheet piles can be taken over upon consultation. If you have any questions or would like more information, please send us a message or call us. Lsdpezxc I Ejfx Agrehl

Condition: good (used), functionality: fully functional, Year of construction: 1993, Well-maintained, used plate shear from Amada. Lhsdpezvqprefx Agrol Type: GPX 1230 Capacity: 3050 x 12 mm Equipped with a high-precision table at the rear.

Condition: used, Year of construction: 2009, gebraucht 2009 9725 prompt, Zwischenverkauf v Spanien 14700 € 1 110 to 300 mm 5 2 40x20 (28x28) mm 80 mm 17 1/min 600x15 (400x20) mm 605 mm 152x152x13 mm 50/50 mm 90x52x13 mm 5 kW 2130 mm 1200 mm 2200 mm 2500 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear with hydraulic downholder angle bar shear with minimum deformation by diagonal moving of the blade , with hydraulic downholder round and square bar shear rectangular notching unit punching unit up to diam. 40 mm oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE Lhsdpfx Aowiq D Ejgrol We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades Ljdpfxozn Ahde Agrohl - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, total length: 3,200 mm, For sale: a new CIDAN RAPIDO 32 electric guillotine from our showroom. The machine has not been used in production and is connected and fully ready for operation. It can be viewed in person, tested, and trial cuts can be performed. The machine is in stock – fast delivery is possible. The CIDAN RAPIDO is a fast and reliable electric guillotine designed for precise sheet metal cutting. The machine can perform up to 35 cuts per minute, making it ideal for both individual jobs and intensive series production. The drive system with eccentrics, the material clamping system, and the sheet support elements mounted close to the blades allow for convenient and precise cutting, even of narrow strips. The guillotine has angular supports on both sides of the front table, ensuring accurate sheet feeding at a 90° angle. LED lighting in the cutting area allows the operator to clearly see the cutting line. Key information: Lhodpszz Rqtofx Agrol Manufacturer: CIDAN Machinery Model: RAPIDO 32 Condition: New / showroom machine Working length: 3200 mm Max. steel thickness: 2.5 mm Max. stainless steel thickness: 1.6 mm Max. aluminum thickness: 3.7 mm Cutting speed: up to 35 cuts/min. Weight: approx. 2100 kg CUTLINK control and automatic back gauge The guillotine is equipped with the CIDAN CUTLINK control system – a fast and easy-to-use program that allows up to 10 different operations to be programmed simultaneously. After the operator enters the required dimensions, the 750 mm automatic back gauge automatically adjusts to the required position, allowing for quick and accurate cutting of different widths. Sheet support and return The pneumatically controlled sheet support system allows for control of the material during cutting. After cutting, the cut sheet is directed to the front material trolley, so the operator does not need to collect parts behind the machine. The trolley can be easily removed and transported, and also picked up with a forklift. Additional equipment included with this machine: Telescopic extension of the front table up to 800 mm from the cutting line – for easier positioning and support of large sheets. Material trolley – for collecting cut sheets and convenient transport to bending or other machines. LED cutting area lighting. Automatic 750 mm back gauge. CUTLINK control system. Ideally suited for sheet metal processing, roofing and facade manufacturing, ventilation, and other sheet metal processing companies. The machine is located in our showroom, connected, and ready for demonstration. Fast delivery is possible. If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), functionality: fully functional, working width: 4,000 mm, sheet thickness (max.): 5 mm, number of support arms: 3, Equipment: CE marking, For Sale; 1 used 4metre Gade guillotine c/w non magnetic rear sheet support Lhjdpsztczhofx Agrsl The G.A.D.E. CO 40/4 is an Italian-made hydraulic guillotine sheet metal shear from the manufacturer's "Business" series. It features a robust monolithic welded structure designed for precise, straight cuts in metal fabrication workshops.  Machine Specifications Cutting Length: 4050 mm / 4metre Maximum Cutting Thickness: 4 mm (often rated up to 4/5 mm depending on material tensile strength) Build: Heavy-duty electro-welded monolithic frame, precision-machined for structural rigidity Operation: Hydraulic shearing system with integrated backgauge and control support (such as TRIA CNC configurations on select variants) / front operated powered back gauge Non magnetic rear sheet support ideal for your light / thin gauge steel cutting

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Lsdpfozd Hb Hox Agrshl Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: good (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, type plate available, Model VR 13/3000 with numerical control, motorized back gauge, blade spacing adjustment, angle adjustment, and rear sheet metal support. Lhodpfx Agszrzkxersl

Condition: good (used), Year of construction: 2016, machine/vehicle number: 12300379, Offer 26209 Technical data: - max. working width 1020 mm Lhodpfxszrk Ruo Agrol - max. material thickness 2.5 mm - cutting angle 2.4 ° - stroke rate up to 34 1/min - manual rear stop with digital position display 500 mm - table height 850 mm - front angle stop - front extendable material support - pneumatically assisted sheet metal lifting with sheet metal discharge to the front - electric foot pedal - tapping – single stroke can be preselected - rear safety guard - mounted on a steel plate - pneumatic connection 6 bar - drive 400 V / 3 kW - space requirement approx. W 2100 x H 1150 x D 2200 mm - weight approx. 1400 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2018, Hydraulic combined punching machine + profile steel shear Manufacturer: Kaast Model: PS 45 Year of manufacture: 2018 Lsdpfey Alc Nex Agrjhl Technical data Make: Kaast Model: PS 45 Year: 2018 Punching force: 45 t Power: 4.0 kW Dimensions: approx. L 1.50 x W 0.80 x H 1.70 m Weight: approx. 1.20 t Equipment - Punching station - Steel shear - Square notching station - Central lubrication All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), functionality: fully functional, working width: 2,050 mm, sheet thickness (max.): 10 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, back gauge adjustment: motor-driven, power: 9 kW (12.24 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,500 kg, total length: 2,600 mm, Equipment: angle stop, emergency stop, foot remote control, Well-maintained Promecam GH1020 shear. Cutting length 2050 mm and 10 mm steel capacity! Lodpfjzvhktsx Agrohl Can be inspected by prior arrangement.

Condition: used, functionality: fully functional, ---SCHIAVI hydraulic guillotine shear PROMECAM 3000X10, throat 500 mm, motorized backgauge, dimensions: 3400x2150x2000(H) mm, weight 8900 kg Lodpfxswn Tk Eo Agrehl ---SCHIAVI hydraulic guillotine shear 3000X6, throat 500 mm, motorized backgauge, dimensions: 3400x2000x1800(H) mm, weight 7500 kg

Condition: good (used), Year of construction: 2005, sheet width 3050 mm plate thickness 12.0 mm ST plate thickness 8.0 mm VA no. of strokes 7 - 14 Hub/min down holder 18 Stück cutting angle 0.5 - 3.0 ° work height max. 930 mm back stop - adjustable 1000 mm Control SP 8 total power requirement 22.5 kW weight 8500 kg range L-W-H 4180 x 2030 x 2210 mm from a maintenance workshop good / well-maintained condition (!!) Equipment: - electro-hydraulic guillotine shear with guided blade beam - includes HACO NC control system "SP 9" * in like-new condition * backgauge pre-selection positioning * digital display of actual value * electro-hydraulic cutting angle adjustment with digital display * emergency stop switch - NC motorized backgauge on recirculating ball screws - manual blade gap adjustment, adjustable from the rear Lodszr Rqnspfx Agrjhl - front finger guard - 1x side gauge ... 1,000 mm - rear sheet metal chute - 1x movable foot pedal - operating manual

Condition: good (used), functionality: fully functional, Year of construction: 1988, Profile steel shears Peddinghaus Peddycut 275, 6-way combination Immediately available ex works: Profile steel shears Peddinghaus Type Peddycut 275 Year of manufacture 1987 Pressing force 27 tons Table 400 x 250 mm Overhang 90 mm Capacity 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square steel 25 mm Blade length 175 mm Lhsdpfozkg Rnex Agrsl Punch stroke 24 mm Pierces 20 mm holes in 19 mm or 30 mm thick sheet metal Foot switch Bobmewfdbpsm Av Euedc Various punch dies Transport: ex works

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 00521120, MACHINE SPECIFICATION Maximum cutting thickness 1.5mm Maximum Cutting length 1030mm Lsdpjzia Nzsfx Agrshl Shear angle 3 degrees Working pressure 7 to 10 bar Dimensions (L x W x H) 1380mm x 1210mm x 1300mm Approximate weight 195Kg MACHINE EQUIPPED WITH Squaring arm Rear guarding Trailing footswitch

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW Ledpfezycpxsx Agrshl weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 1963, cutting length 2500 mm Lhodpfx Agoul Eixjrsl plate thickness 3 mm distance between columns 2050 mm blade length 2650 mm total power requirement 3 kW weight of the machine ca. 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process.

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand Lhodpfx Agsznngxerol - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2013, actuation type: electric, working width: 3,050 mm, cutting angle (min.): 1.3 °, stroke rate (min.): 10 1/min, stroke rate (max.): 47 1/min, sheet thickness (max.): 3 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 650 mm, power: 11 kW (14.96 HP), input voltage: 400 V, overall weight: 2,500 kg, total length: 3,800 mm, total width: 1,650 mm, total height: 1,650 mm, number of support arms: 3, Equipment: angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Digital display Lhsdpfxoyhfple Agrjl

Condition: used, Max. stamping capacity: 800 kN Max. thrust: 1100 kN Lhodpfx Agexf E U Uorjl Punches 27 mm holes in 20 mm steel Shears on the flat steel shear to 500 mm up to material thickness of 18 mm steel Further technical data on request With a range of stamps and matrices

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, The cutting tool can be used with 4 different attachments, with 2 currently in use. Manufactured in Germany. Lsdpfezmyyzjx Agrohl

Condition: ready for operation (used), functionality: fully functional, control type: manual, actuation type: hydraulic, Geka (Spain) Hydraulic Punching, Shearing, and Notching Machine Model: Hydracrop–55/110A Lhjdpfeyxpawsx Agrel Year of Manufacture: 2001 Flat Bar Shear Capacity: 300 x 15 mm / 200 x 20 mm Blade Length: 305 mm Square: 25 mm Working Height: 880 mm Angle Shear Capacity: 1100 kN Deformation-free Angle Iron: 120 x 120 x 10 mm Angle Iron 45° Shear: 70 x 70 x 7 mm Round and Square Bar Shear Round Steel: 40 mm Square Steel: 40 mm Notcher Sheet Thickness: 10 mm Angle Iron: 100 mm Notch Depth: 90 mm Notch Width: 42 mm Punching Station Capacity: 550 kN Maximum capacity with quick-change system: Ø 40 x 10 mm / Ø 20 x 20 mm Throat Depth: 250 mm Stroke Length: 60 mm Working Height: 1085 mm General Specifications Number of strokes per minute at 20 mm stroke: 25 Power: 3 kW Net weight: 1320 kg Gross weight: 1518 kg Dimensions (L x W x H): 1600 x 1100 x 2000 mm Machine Details - 2 cylinders: one for the punching side, one for the shearing side - Punching unit with quick-change system - C-frame die holder + extra support - Nipple and die up to Ø 40 mm selectable - Flat bar shear incl. support table and 45° and 90° guides - Angle shear - Round and square bar shear (suitable for mounting U and I profiles as well) - Rectangular notcher - Emergency stop - Key switch for notcher safety - Selector switch for deep or shallow punch/shear operation - Selector switch for foot pedal / back gauge - Stroke adjustment for punch and shear side - 2 foot pedals - Scrap collection tray for punch slugs - Dutch instruction manual Includes: Punch table incl. back stops Notching table incl. back stops Electric length stop 1000 mm 30 sets of punch nipples Price of the Geka Hydraulic Punch/Shear/Notch Machine: €16,500 Machine is as new, original paint, like new, original finish Delivery conditions: Delivery time: from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and/or parts. Machines, accessories, and parts are sold as-is and as known to the buyer. We cannot provide a warranty for used machines, accessories, and parts. Delivery terms: Delivery time: ex stock, excluding VAT Delivery: ex works Baarle-Nassau Payment: before collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that stocks and sells primarily used Kardex Remstar automatic lift and rotating warehouse systems. We install and/or dismantle these systems safely with VCA-certified engineers and have been doing so for more than 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands VAT No.: NL800103026B01 Chamber of Commerce Tilburg 18034279

Year of construction: 1989, condition: used, Working width: 6000mm, max. sheet thickness: 1.25mm, control panel: Siemens SIMATIC HMI, including electric rotary shear, an on-site inspection is possible. Lodpfxoz Ekc Is Agrehl

Condition: used, functionality: limited functionality, Year of construction: 1982, Maximum Cutting Thickness: 16 mm (approx. 5/8") for mild steel. Maximum Cutting Width: 3150 mm (approx. 10.3 feet). Total Machine Weight: Approximately 24,000 kg (24 tons). Cutting Angle: Fixed at 2°. Drive Type: Mechanical drive with a robust, rigid frame construction. Lhodpfeykl Nkjx Agrel Hold-down System: Typically features hydraulic hold-downs to secure uneven sheets during the cutting process.