Used Crocodile Shear for sale (1,595)

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm Lsdezcqy Sjpfx Agrjhl - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: used, functionality: fully functional, TORSION BAR PRESS BRAKE, 2500x40T, used, overhauled and updated to standards, OMAG PI 4020. OPERATES ONLY AT SLOW SPEED, FOR STANDARD-COMPLIANT USE WITHOUT PHOTOCELLS. New electrical system, machine overhauled, and UPPER BLADE AND LOWER PRISM WITH 5 GROOVES, GROUND WITH 2 MANUALLY ADJUSTABLE REAR POSITIONERS. Lsdpfx Agjzhknlershl

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2004, working width: 2,500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 2,500 mm, Refurbished machine Ljdpfozp U H Usx Agrjhl HACO hydraulic guillotine shear, TS 2.5m x 6mm model New SP9 control system Retractable rear stop with 820mm stroke New, four-edged blades made of stainless steel

Condition: good (used), Year of construction: 1987, machine/vehicle number: A20072, Offer 26300 Technical data: Lhodpfx Agezw Dt Horol - max. working width 3050 mm - max. cutting capacity St 40 12 mm - Cutting angle adjustable, motorized 0.5 - 3° - Manual cutting gap adjustment - Number of hydraulic clamping bars 18 pcs - Motorized rear stop 10 - 1000 mm - Front angle stop - Number of strokes per minute, depending on cutting angle and cutting length 7 - 17 - Hydraulic drive 400 V / 22.5 kW - Table height 770 mm - Space requirement approx. W 4100 x H 2030 x D 2030 mm - Weight approx. 8500 kg - Includes: - Foot switch - Cutting line illumination

Condition: not inspected (used), Hydraulic guillotine shear Cutting length: 3150 mm Ledpeyv Dmysfx Agrjhl for steel ST 37 up to 8 mm thickness

Condition: ready for operation (used), Year of construction: 1990, control type: manual, degree of automation: manual, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge adjustment: manual, back gauge: 800 mm, power: 7.5 kW (10.20 HP), overall weight: 1,800 kg, total length: 2,850 mm, total width: 2,350 mm, total height: 1,600 mm, cutting length (max.): 2,050 mm, throat depth: 300 mm, Guillotine shear, cutting length 2050 mm, cutting capacity 3.25 mm, throat 200 mm, motor 7,5 KW, working high 800 mm, back gauge 800 mm manual, dimension 2850x2350x1600 mm, weight ca. 1800 kgs Ledszy Nlyepfx Agrshl

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 586, ΜΟΝΤΕΛΟ- C/A4 SCIVOLO 70 Lhsdpfx Aou Nvhzogrol ΕΤΟΣ ΚΑΤΑΣΚΕΥΗΣ - 2006 ΑΡΙΘΜΟΣ ΠΛΑΙΣΙΟΥ - 586 ΤΥΠΟΣ ΜΗΧΑΝΗΣ - DIESEL

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm • Cutting of L-shaped profiles at 90º: 120x120x10mm • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm Lsdezg Dxbjpfx Agrshl • Bending: 200x12mm • Motor: 9KW • Net weight: 2500Kg

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 4-meter guillotine shears from Safan Model: VS 430 6 Capacity: 4300 x 6 mm Year of manufacture: 1987 Lodpfxoxtpwvs Agrshl Electric backgauge with NC readout Adjustable cutting angle

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Lodpfx Asrckh Ssgrehl Technical data: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Condition: used, Sacma cutting and slitting line: •Manufacturer of the line: Sacma S.R.L., Italy, Vigevano (PV) •Year of manufacture: 1975 •Electrical power: Voltage 400 V ± 10% - 50 Hz frequency •Compressed air: Pressure min/max 4.5 - 6 bar Ljdjzumm Depfx Agrshl •Cycle time: Maximum unwinding speed is 12 m/min •Dimensions of the line: Length 23.5 m; width 4.8 m •Width of the coil: Min 300 mm / max 1280 mm (maximum coil weight 12 tons) •Length of the sheet: Min 450 mm / max 3000 mm •Material thickness: 0.4 - 1.0 mm

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, cutting force: 650 t, - Machine in very good technical and optical condition, fully refurbished - CAT engine - Cutting force: 650 tons Lhsdpfoy Ncqwox Agrol - Semi-mobile - Filling bed: 7m

Condition: used, Year of construction: 2011, total length: 3,800 mm, total width: 2,000 mm, total height: 1,900 mm, Colour: Grey Weight: 6.000 kg - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 22106 Lhsdpfxjy Nk S Ao Agrel - Drive system: Teach-in - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 22 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 3800mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) Lhjdpeycxgmefx Agrjl * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW Lsdpfx Asuagxpjgrshl dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1700 x 950 x 1900 m Ljdpfjy Hxq Iex Agrohl

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Lhodpfx Aszty E Djgrjl Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: used, Year of construction: 2011, Hesse & Co MS 2504 - Electric Panel Shear Lhjdpfxjzi A Rue Agrjl - Electric back gauge, 750 mm - Manual shear gap adjustment - 1 set of replacement blades - Operating manual - Year of manufacture: 2011 Technical data - Cutting capacity: 4 mm - Cutting length: 2550 mm - Cutting angle: 1° 30' - Strokes per minute: 42 - Table width: 450 mm - Table height: 800 mm - Back gauge (max. length): 750 / 100 mm - Motor power: 7.5 kW - Operating voltage: 400 V - Dimensions (W x H x D): 3050 x 1330 x 2260 mm - Weight: 3300 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 27/5, Offer 26238 Technical specifications: - Max. working width: 3190 mm - Max. material thickness at 40 kg/mm² tensile strength: 6.3 mm - Cutting angle: 1.2° - CNC cutting gap adjustment Lhodpezwm Hiofx Agrsl - Strokes: 30 to 64 1/min - Stand extension: 100 mm - Table height: approx. 800 mm - Number of clamps: 16 pcs - Back stop: 5 - 1000 mm; - 3 pcs front support arms: 1500 mm - E-foot pedal - Rear tilting roller table - Drive: 400 V / 18.5 kW - Space requirement: approx. W 3900 x H 1800 x D 2100 mm - Weight: approx. 6800 kg - Includes: - CNC control system RAS - Rear tilting roller table / sheet metal lifting device - Movable material collection container - Electronic rear safety device / light curtain

Condition: used, functionality: fully functional, sheet thickness steel (max.): 21 mm, Sacma Hydromatic Shear 1250 X 21 C 11-12 Manufacturer: Sacma Model: Hydromatic C 11-12 Ljdpfx Agjwq Sv Sjrjhl Cutting Capacity: 21 Mm. Cutting Length: 1,250 Mm. Passage Between Shoulders:1,410 Mm. Recess: 250 Mm. Main Motor Power: 30 Hp. No. of Strokes Per Minute: 25 Total Weight: 15.5 Tons. Motorized Register Stroke 1,000 Mm. Internal Code: Svr 325

Condition: good (used), functionality: fully functional, Safan HT 255-4 TS hydraulic plate shear for sheet metal, in unique condition! Hardly any signs of wear are visible on the work table from the sheet metal that has been processed on it! Capacity: 4 mm over 2550 mm Ljdpfjy Uliasx Agrohl Easy operation, precise rear gauge digitally adjustable. Equipped with a safety guard on the rear and an emergency stop on the front. The machine has a support system for the cut material as well as a collection tray (not shown).

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Ledsxab I Hepfx Agrshl Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs Lhedpfevmmruex Agrsl - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Condition: used, functionality: fully functional, OMAG Hydraulic Shear 3000 x 10, motorized back gauge, throat depth 200 mm, dimensions: 345 x 210 x 215 (h) cm, weight: 10,000 kg Lhjdowvqkrjpfx Agrel OMAG Hydraulic Shear 3000 x 4, motorized back gauge, throat depth 200 mm, dimensions: 340 x 135 x 150 (h) cm, weight: 4,000 kg

Condition: used, Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Device features: - Folding press Lhodeyk H E Topfx Agrol - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Important: Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.