Used Cronosstech Chsp 200/70 for sale (27,514)

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Bjdpfx Ajiidm Noqwjll Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2017, condition: like new (used), I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 Euro. Sellable per pc. or totally together. Blsdjhzr Stspfx Aqwjl Available immediately.

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Bljdpfx Aqjb Eln Dowel Laminated panel press from our showroom; Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2024, - Mobile scissor lift table with platform base frame and aluminum worktop format 1000x600mm - Operation for the up / down stroke takes place via a hydraulic foot pump - load capacity 200 kg Bodpfx Aofhbvnjqwoll - Construction height 400 mm - Useful stroke 610 mm - Maximum height 1010 mm - platform 1000x 600 mm - Weight approx. 35 kg - Swivel castor 2 pieces with brake, 2 pieces without brake - Wheel Ø 125 mm - Color gray aluminum

Condition: used, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,380 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2017, Tyre size: 385/65R22,5 Blodpfx Aqjucy Agowsl Suspension: air suspension Drive: Wheel Empty weight: 7.200 kg Carrying capacity: 34.800 kg GVW: 42.000 kg

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. Blodpfx Aqeudvt Rswjl It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph Bledpjt Hwfnjfx Aqwel - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Year of construction: 1980, condition: good (used), 17 rolls, Ø 90 mm strip width: 50 - 200 (250) mm Bjdjdnzvdjpfx Aqwsll strip thickness: 2 - 10 mm

Condition: as good as new (ex-display), Year of construction: 2025, Technical data POWER UNIT 200 P • Intake nozzle diameter: 200 mm • Motor rated power: 2.9 kW; 400 V/50 Hz Bjdpebpg Ncefx Aqwell • Max. volume flow: 3010 m³/h • Rated volume flow: 2262 m³/h • Vacuum: 2174 Pa • Filter area: 13.7 m² • Filter cleaning: Compressed air cleaning • 2 collection containers (rolling containers): a. 241 liters • Dimensions (L x W x H): 2322 x 830 x 2050 • Weight: 320 kg • Design / operating side can be selected: right / left Location: In stock at Bitburg Top price for the showroom model

Condition: excellent (used), Year of construction: 2007, Demag Concept 100/420-200 Year of manufacture: 2007 Injection Unit: Screw diameter: 25 mm Injection pressure: 2752 bar Shot volume: 61.3 cm³ Shot weight (PS): 54 g Max. dosing stroke: 125 mm Clamping Unit: Clamping force: 1000 kN Max. opening stroke: 500 mm Min. mould installation height: 250 mm Max. distance between platen: 750 mm Platen size: 600 x 600 mm Clear tie bar spacing: 420 x 420 mm Max. mould weight: 700 kg Equipment: Core pull: 2x Mould heating: 6x Blodpfx Aqsx Uqb Ijwsl Air valve: 1x Robot interface Machine is supplied with robot

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 Bledpfeymf H Uox Aqwjl • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2023, overall weight: 22,500 kg, For sale: 26 Siemens motors, new, from 2023. I will sell the entire lot or individual units. IE3 class. 1 pc. 894718.2 IE3 Motor, 3-phase, 55kW, 4-pole, 400|460V, 50|60Hz, Siemens, 1PC3105-2CB20-0FA0, 04/2023, on EPAL pallet, wrapped in foil. 1 pcs. 894721.1 IE3 Motor, 3-phase, 75kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB03-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 4 pcs. 894726.1 IE3 Motor, 3-phase, 132kW, 4-pole, 400|690V, 50Hz, Siemens, 1PC3005-3AB20-0CA0, 06 & 07/2023, on EPAL pallet, wrapped in foil. 2 pcs. 894727.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.1 IE3 Motor, 3-phase, 200kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894728.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 894729.3 IE3 Motor, 3-phase, 250kW, 4-pole, 400|460V, 50Hz/60Hz, Siemens, 1PC4105-3AB03-4FA1, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894907.1 IE3 Motor, 3-phase, 160kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. Bsdpov Iymujfx Aqwjll 1 pc. 894907.11000 IE3 Motor, 3-phase, 160kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 07/2023, on EPAL pallet, wrapped in foil. 3 pcs. 895025.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 06/2023, on EPAL pallet, wrapped in foil. 2 pcs. 895025.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-2DB63-4AB4-Z, 07/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.1 IE3 Motor, 3-phase, 110kW, 4-pole, 400|690V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11000 IE3 Motor, 3-phase, 110kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB03-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895135.11500 IE3 Motor, 3-phase, 110kW, 4-pole, 575V, 60Hz, Siemens, 1PC3105-3AB00-0CA1, 05/2023, on EPAL pallet, wrapped in foil. 1 pc. 895136.11000 IE3 Motor, 3-phase, 200kW, 4-pole, 400V, 50Hz, Siemens, 1LE1623-3AB53-4AB5-Z, 06/2023, on EPAL pallet, wrapped in foil. 1 pc. 895631.00020 IE3 Motor, 3-phase, 132kW, 2-pole, 660V, 50Hz, Siemens, 1LE1623-3AB43-4AB5-Z, 04/2023, on EPAL pallet, wrapped in foil. 1 pc. 894719.11080 IE3 Motor, 3-phase, 75kW, 2-pole, 400V, 50Hz, Siemens, 6SL3203-0CE21-8AA0, 03/2023.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the Bodpfow N S E Ajx Aqwsll sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WE OFFER AN BEAUTIFULL CONDITION DEEP DRAWN PRESS 160 TON WITH BACK FORCE BOTTOM 70 TON MACHINE WAS BUILD ON ORDER MACHINE WAS USED ONLY A COUPLE TIMES PER YEAR FOR SOME SMALL PARTS. CONDITION IS EXCELLENT . NEWER RUN A PRODUCTION. Bodjvxbn Ujpfx Aqwell WE CAN ALSO DELIVER MACHINE FOR A CUSTOMER TABLE SIZE: 1030 X 630 OPEN GAP: 740 MM TOTAL WEIGHT APPROX 8000KG DIMENSION 1500 X 1500 X 4000

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Bljdpfow Sgnkjx Aqwsl Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit Bodpfx Aex Nkp Ioqwjll • Injection unit size: 290 • Injection pressure: 2,500 bar • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: new, functionality: fully functional, Hoerbiger Origa OSP-P40-02000-00370 Linear actuator. Bsdpfx Aotvz I Dsqwjll Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2026, BENDMASTER 70 Tube and Profile Bending Machine Bodpfx Aovugv Aoqwsll The BENDMASTER 70 tube and profile bending machine is an industrial, non-mandrel bending machine designed for precise bending of steel tubes, square profiles, and materials with larger cross-sections. Thanks to its robust construction, automated bending angle measurement system, and powerful drive unit, the machine provides repeatability, efficiency, and reliability – even during intensive production work. It is an ideal solution for heavy industry, construction, and industrial installation applications. Main advantages of the machine Non-mandrel bending system – enables tube bending without the need for a mandrel, simplifying operation and accelerating the production process. Maximum tube capacity of 70 × 5 mm – allows processing of thick-walled steel and structural tubes. 5 kW main drive motor – provides high torque and reliable bending performance even with demanding materials. Digital bending angle display – real-time monitoring of preset and actual values enables precise parameter adjustment. Two-speed operating system – 1.2 rpm during bending and 2.4 rpm during return movement increase overall cycle efficiency. Stable welded steel construction – ensures resistance to deformation and vibration, even under heavy loads. Dies for tube diameters 38.1 mm, 48.3 mm, and 70 mm – the machine includes tooling for the most commonly used industrial tube sizes. Design and technology The BENDMASTER 70 has been designed as a non-mandrel roller bending machine with an electro-hydraulic drive system, suitable for heavy-duty operation. The powerful 5 kW main motor enables stable and safe bending of large-diameter tubes. The digital bending angle measurement system integrated with the control panel allows precise programming and monitoring of operating parameters. The machine features a compact design and can be integrated into production lines. Precision and work efficiency The BENDMASTER 70 steel tube bending machine provides complete control over the bending process. The die rotation speed during bending (1.2 rpm) ensures accuracy and process safety, while the fast return speed (2.4 rpm) improves productivity. The ability to bend up to 180° allows the production of complete arcs and spiral shapes, including large-section structural tubes. The machine is designed for precise forming of components where dimensional accuracy is critical. Applications The BENDMASTER 70 bending machine is used in many industrial sectors, including: production of steel structures and load-bearing components, construction and installation industries, HVAC and heating system installations, production of railings, gates, and industrial fencing, prefabrication plants for piping systems. Standard equipment Digital bending angle measurement system Tube bending dies: Ø 38.1 mm Ø 48.3 mm Ø 70 mm Technical specifications Parameter Value Maximum tube bending capacity 70 × 5 mm Maximum square profile capacity 50 × 50 × 2 mm Maximum bending angle 180° Die rotation speed during bending 1.2 rpm Die rotation speed during return 2.4 rpm Main motor power 5 kW Overall dimensions 1300 × 700 × 900 mm Weight 680 kg

Condition: like new (used), KRAMER + GREBE 200 L Industrial Cutter – Stainless Steel KRAMER + GREBE 200-liter industrial cutter, designed for cutting, chopping, mixing, and emulsifying food products in professional production processes. Manufactured by KRAMER + GREBE, a specialized manufacturer of machinery for the meat industry, this cutter features a 200-liter bowl and a high-speed rotary blade system that allows for processing the product to achieve different degrees of chopping, mixing, and homogenization. Its robust stainless-steel construction and industrial capacity make it a particularly suitable piece of equipment for meat processing plants and food product manufacturing. MAIN FEATURES -Manufacturer: KRAMER + GREBE -Type: Industrial cutter / bowl cutter -Bowl capacity: 200 liters -Cutting system using rotary blades Bledox S Ih Tjpfx Aqwjl -Circular processing bowl -Cutting, chopping, and mixing operations -Suitable for homogenization and emulsification -Construction primarily in stainless steel -Protective cover for the processing area -Integrated control panel -Robust construction for industrial use -Designed for batch processing -Hygienic design for the food industry -Easy access for cleaning and maintenance APPLICATION The KRAMER + GREBE 200 L is designed to perform intensive size reduction, mixing, and homogenization operations through the combined action of the rotating bowl and the blade system. The product circulates repeatedly through the cutting area, allowing for different degrees of processing to be achieved depending on the raw material, processing time, and selected parameters. It can be used for operations such as: Cutting and chopping Mixing Homogenization Emulsification Preparation of meat mixtures Preparation of fillings Mixing of ingredients Preparation of formulated products APPLICATIONS Particularly suitable for meat industries, sausage manufacturers, producers of ready meals, pet food, and other food industries that require a robust cutter for batch production. Depending on its configuration, it can be used to produce sausages, pâtés, meat emulsions, fillings, ready meals, and other food formulations. The combination of KRAMER + GREBE, a 200-liter bowl, and industrial construction in stainless steel provides a versatile solution for professional cutting, mixing, and emulsification processes. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Bledpfszxqvdox Aqwol Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: new, new ! Bodpezxrdvefx Aqwoll all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, Year of construction: 2003, CNC External Cylindrical Grinding Machine: total connected load 67 kW, voltage 3x400V 50Hz, nominal current 121A, weight approx. 9500 kg Data Kelvin Chiller (Model KRA45): serial number 0304666, year 2003, cooling capacity 4500W Bledszwf Uxepfx Aqwol Data Ritz Coolant Pump (Type F2506): serial number 3196140, manufactured in 1994, 2.9kW

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Travel Y: 150 mm Maxi grinding height: 180 mm Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Bsdpfx Aqszwgrljwell Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Bodezwgt Nspfx Aqwsll Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. Blodpfx Aqszw Uh Uewol -Complete user and maintenance manual (including parts list and programming instructions). SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.