Used Durendus Workshop Press Portal Press for sale (17,764)

Condition: like new (used), Year of construction: 2019, Mossini Transfer Press PDM/4BLD Pressing force: 2,000 kN Table area: 6,000 x 2,500 mm Slide area: 6,000 x 2,500 mm Stroke height: 900 mm Strokes per minute: 10 - 25 1/min Slide adjustment: 400 mm Overall height: 1,270 mm TOTAL STROKES: 1,000,000 strokes NORDA Transfer X-axis travel: 0 - 1,200 mm Y-axis travel: 0 - 1,125 mm Z-axis travel: 350 mm Max. transport weight: 200 kg Mill tool strip system Crjdoz Dw U Ujpfx Adrjh Strip width max. up to 1,850 mm Strip thickness: 0.5 - 3.0 mm Coil load capacity: 24,000 kg

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Presto HG20R Press container for hooklift vehicles 20 cbm usable volume Discharge door hinged at the top Csdpfx Aex Svx Tsdrerh Hooks on both sides Split lid over filling opening, opens left/right Prepared for ramp operation Machines are refurbished, inspected, serviced and repainted in your desired standard RAL colour. We are happy to provide you with an offer including delivery. Pictures are reference images of machines of the same type built by us.

Condition: used, CNC press brake WEINBRENNER, type EGP 80 Die-bending machine (DEFECTIVE) Serial No. 1257G, Year of manufacture 1991 Press force 80 tons Working length 1300 mm Credpjz A Ia Ssfx Adrsh Stroke 260 mm with Cybelec DNC 94 PS with back gauge Weight 8800 kg without tools, tooling system probably TRUMPF Machine is not functioning, control system does not boot up. The parameters are probably lost.

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Crjdpfsz A R Irjx Adreh Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: used, total width: 1,100 mm, total height: 1,500 mm, total length: 1,800 mm, Motor power: 4.0 kW Crsdpfjz D H Azjx Adrjh Hopper (diameter): 1000 mm, with agitator Throughput: 25 - 25 kg/h, depending on the material

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Complete line as shown on photos. Excellent condition. Force 200 t Table 1800 x 1000 mm Csdpfx Ajz D Tdfedrjrh Number of cycles per 1 min Machine dimensions 2700 x 2000 x 4400 mm Machine weight 28000 kg

Condition: ready for operation (used), The DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for the economical reduction of volume of residual materials (suitable for recycling) in industry and crafts: Cjdpfjra A E Ujx Adrorh Cardboard boxes Foam PET bottles Insulation mats and other compressible materials. Horizontal baler, waste press DIXI 60 SLD with ejector Technical specifications: Pressing force: 60 tons, Unit pressure: 6.81 kg/cm², Power supply: 400V / 7.5kW Bale dimensions: 800x1100x1200 mm, Number of ties: 3 Bale weight: approx. 370-410 kg, Tying: manual Loading aperture: 990 x 1110 mm, Machine weight: 5420 kg Average pressing cycle: 47 seconds Year of manufacture: 2011-2016 Dixi 80SLD Baler Technical data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Infeed opening (width x height): 1040 x 1110 mm Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size (width x height x length): 1120 x 1120 x 1200 mm Bale weight: Depending on the material, approx. 500–600 kg Bale tying: 3-fold, manual Machine dimensions: Length: 4200 mm (+cage 1600 mm) Width: 1830 mm Height: 2620 mm Machine weight: approx. 8000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016-2020 Weight: approx. 8.4 tons Condition: Used Price: 14,000 EUR

Condition: used, total length: 3,800 mm, total width: 1,650 mm, total height: 2,400 mm, Colour: Green Empty weight: 3.500 kg - Details: - └ Description: The plates need to be repaired - Documentation available: No - CE certificate present: No - Main motor power [kW]: 2.2 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 Codpfjztc R Ajx Adrsrh - Max. workpiece height [mm]: 450 - Total stroke [mm]: 450 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Top/bottom separately heated: Yes - Voltage [V]: 400 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1650mm x 2400mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min Crjdpfxexuv Hto Adrjh total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: good (used), mileage: 216,019 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,950 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed (set) - Halogen lamp Codpsx E Ra Sefx Adrjrh - Short cab - Manual - Power take-off (PTO) - Pump - Radio/cassette - Reversing camera - Lane departure warning system - Seat cover - Central lubrication - Additional brake system Number of axles: 3, Configuration: 6x2, Kerb weight: 12,188 kg, Gross weight: 26,000 kg, Total fuel tank capacity: 260 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Anthracite, Heated mirrors, Reversing camera, Lighting: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Engine output: 338 kW (453 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Additional brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, System type: Meiller AK16, Pump, Central locking, Seating configuration: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, Meiller AK 16 NT Gearbox Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tyre tread left: 4 mm; Tyre tread right: 5 mm; Suspension: Leaf spring Axle 2: Lift axle; Steering; Tyre tread left: 11 mm; Tyre tread right: 10 mm; Suspension: Air suspension Axle 3: Twin tyres; Tyre tread left inside: 12 mm; Tyre tread left outside: 10 mm; Tyre tread right inside: 12 mm; Tyre tread right outside: 11 mm; Suspension: Air suspension Weights Unladen weight: 12,188 kg Payload: 13,812 kg GVW: 26,000 kg Functional Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Financial Information Leasing price: €1,064 per month (default, 60 months); Please inquire for further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Fair trading practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Skilled technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and request an offer on our website. Ask directly about our European warranty package.

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97 09 05 010 1/2, filter pressure: 15 bar, pressure: 15 bar, cake thickness: 25 mm, warranty duration: 12 months, year of last overhaul: 2026, operating pressure: 380 bar, number of chambers: 25, control voltage: 24 V, Equipment: documentation/manual, safety light barrier, Good day, We have two identical chamber filter presses in stock, which have been completely overhauled and are therefore in new condition. They are immediately available! Please see the attached photos: Chamber filter press – manufactured by MSE with plate thickness: 50mm each with an additional set of plates cake thickness: 25mm volume: approx. 210 l useful length approx. 1800mm (34 plates) format: 630x630 mm dimensions: 3700x1100x1800 mm (l x w x h) empty weight: 2700kg open filtrate discharge plate transport manual hydraulics electric Please let us know if you are interested in this press. We would be happy to send you a customized offer. Price on request. Cedozt Nc Ejpfx Adrerh

Condition: excellent (used), Year of construction: 2008, operating hours: 64 h, functionality: fully functional, color channels: 5, paper width (min.): 375 mm, paper width (max.): 520 mm, - Ryobi PCS-H - Turning ratio: 2:3 / 5:0 - RYOBI semi-automatic plate changer - IR dryer - Grafix Digital 3000 powdering machine - Electronic side guide control Crsdozduu Uepfx Adreh - Electronic double sheet detection - Ultrasonic double sheet detection - High-stack delivery - Sheet jogger - Automatic blanket washing system

Condition: reconditioned (used), 20 cubic meter skip loader container with usable volume for roll-off tippers Crsdpfjwifmzex Adreh Beringer BPx5 Reconditioned, inspected, and serviced Two-sided mounting Side-hinged discharge door Ramp operation possible Machines are reconditioned, inspected, serviced, and repainted in the desired standard RAL color. We will gladly prepare an offer including delivery.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) (Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled Cjdpfx Aevfy Sxsdrerh 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards new pump installed The machine is being sold in its current condition. The machine was purchased from an insolvency sale and transported to our warehouse. The basic up and down functions have been tested and are working. Apart from that, we have no further information regarding the technical condition or overall functionality of the machine. An on-site inspection can be arranged upon request. The machine is sold as is, without any warranty or guarantee. One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC-Steuerung Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. Crjdpfx Asxc Tr Ajdrjh 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: new, Working width 3500 mm Codpfxod Ih H Ss Adrorh Working height 2300 mm Number of cylinders 4 St.

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies • Special tools included Crjdpfsz E U Dpex Adroh • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: used, Year of construction: 1992, tube diameter 48 mm bending radius max. 90 ° total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection Credpfxez Dkyqe Adreh - bending tools: 48.3; 42.4; 33.7; 1/2" - mandrel length: 4500 mm

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame Codpfxezlyv To Adrorh • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm table surface area 1010 x 560 mm feed down 4,8 mm/sec Crjdpjvu E Uwofx Adreh feed up 7,5 mm/sec weight of the machine ca. 0,9 t dimensions 1320 x 900 x 2450 mm High-quality hydraulic press can be operated manually or by motor. Cylinders can be moved sideways. Safety valve at cylinder end position. CE marked

Condition: good (used), Year of construction: 1990, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 63 t, table width: 800 mm, table length: 630 mm, total length: 17,900 mm, total width: 14,250 mm, total height: 25,500 mm, overall weight: 5,850 kg, height adjustment type: mechanical, stroke adjustment: 105 mm, Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons Cedpfstzxdzsx Adrjrh - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: PRASA HYDRAULICZNA TYPU C HPW 50 50 TON, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, reverse speed: 18 mm/s, pressing force: 51 t, pressing speed: 18 mm/s, stroke length: 200 mm, table length: 500 mm, table width: 400 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! Hydraulic C-Frame Press The Hydraulic C-Frame Press is a professional industrial machine designed for precision pressing, bending, straightening, assembling and forming operations. Its open C-frame design provides excellent access to the working area, making it easy to handle larger workpieces and operate from multiple sides. The robust welded steel frame ensures outstanding rigidity, durability and reliable performance, while the hydraulic system provides smooth, accurate control of pressing force and ram movement. Suitable for continuous industrial use, this press is ideal for production facilities, maintenance departments and metalworking workshops. Main Features • High pressing force • Open C-frame design • Heavy-duty welded steel construction • Precise hydraulic control • Smooth ram movement • Easy access to the working area • Reliable industrial performance • CE certified Technical Specifications • Pressing force: 500 kN (approx. 51 t) • Maximum hydraulic pressure: 25 MPa • Maximum opening: 500 mm • Stroke: 200 mm • Table dimensions: 500 × 400 mm • Throat depth: 200 mm Cjdpfx Adoyr D R Nororh • Downward speed: 19 mm/s • Return speed: 18 mm/s • Motor power: 4 kW Applications • Press fitting • Bending • Straightening • Assembly operations • Forming • Metalworking workshops • Automotive industry • Tool rooms • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 120 mm, spindle motor power: 11,000 W, product height (max.): 390 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, AVAILABLE IN STOCK – READY FOR IMMEDIATE DELIVERY HYDRAULIC CNC SERVO PRESS BRAKE MTP 125×3200 – 125 T – MTP-3212 – 4 AXES X,Y1,Y2,V The brand-new MTP 125×3200 Hydraulic CNC Servo Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets. Thanks to its advanced CNC control system and robust welded construction, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (X, Y1, Y2, V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Servo-driven backgauge (X-axis) and synchronized cylinders (Y1, Y2 axes) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • LED working area illumination • Mobile control panel The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron safety components The machine is equipped with safety light curtains, side guards, a rear safety fence, emergency stop switches, a CE Declaration of Conformity, and an operating manual. TECHNICAL SPECIFICATIONS • Pressing force: 125 T • Maximum bending length: 3200 mm • Maximum sheet thickness: up to 6 mm • Distance between columns: 2700 mm • Throat depth: 320 mm Crsdpjz E N Shefx Adrsh • Ram stroke: 120 mm • Maximum opening height: 390 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: X, Y1, Y2, V • Main motor power: 11 kW • Power supply: 400 V / 50 Hz • Machine dimensions: 3870 × 1550 × 2400 mm • Machine weight: 7400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,200 mm, total width: 1,200 mm, total height: 1,850 mm, overall weight: 2,950 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC SERVO PRESS BRAKE MTP 40×2000 MTP-3212 The MTP 40×2000 Hydraulic CNC Servo Press Brake is a modern machine designed for precise sheet metal bending in manufacturing plants, workshops, and metalworking companies. Thanks to its CNC controller and high-quality components, it provides accuracy, repeatability, and operator comfort. MAIN ADVANTAGES • 40-ton pressing force • 2000 mm bending length • MTP-3212 CNC controller • Servo-driven X and Y axes • AMADA-type tooling system • Rexroth, Schneider and Omron components • High bending accuracy • CE certification MTP-3212 CNC CONTROLLER The modern CNC controller features a color touchscreen for fast and intuitive programming. The software automatically calculates bending parameters and allows storage of up to 40 punch types. EQUIPMENT • Upper punch • Lower die • 2 front support arms • X-axis – servo drive • Y-axis – servo drive • R-axis – manual adjustment • AMADA-type quick clamping system COMPONENTS The machine is equipped with Rexroth hydraulic valves, Schneider Electric electrical components, and Omron safety devices. Steel hydraulic connections increase system durability and reduce the risk of leaks. SAFETY • Safety light curtain • Side safety guards • Rear safety fence Cjdpfx Adeyttfrorerh • Emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL DATA Pressing force: 40 T Bending length: 2000 mm Maximum sheet thickness: up to 3 mm Distance between side frames: 1600 mm Throat depth: 200 mm Stroke: 100 mm Open height: 300 mm Back gauge travel: 600 mm Motor power: 4 kW Weight: 2950 kg Dimensions: 2200 × 1200 × 1850 mm APPLICATIONS The machine is suitable for the production of metal enclosures, electrical cabinets, ventilation components, steel structures, bent profiles, and custom-made sheet metal parts. DELIVERY AND SUPPORT We organize machine transport throughout Europe. We provide technical support, assistance with machine and tooling selection, and access to spare parts and service. Contact us for more information and discover our complete range of metalworking machinery available on our website.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 1,460 mm, total width: 950 mm, total height: 2,380 mm, Special Offer – 5% Discount Available! 25T Open Back Eccentric Press The 25T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features • Open back frame design • Heavy-duty steel construction • Fixed working table • Transversely mounted crankshaft • Dry pneumatic friction clutch • Adjustable slide stroke • Slide balancing device • Integrated safety valves • Manual controls • High productivity • CE certified Technical Specifications Crjdoytcvgjpfx Adreh • Press force: 25 t • Stroke under nominal load: 3 mm • Slide stroke: 10–110 mm • Strokes: 80–120 strokes/min • Maximum die height: 250 mm • Die height adjustment: 50 mm • Throat depth: 210 mm • Distance between frame columns: 450 mm • Working table: 700 × 400 mm • Table thickness: 80 mm • Outer table hole diameter: Ø170 mm • Table hole depth: 20 mm • Inner table hole diameter: Ø150 mm • Slide surface: 360 × 300 mm • Punch hole diameter: Ø40 mm • Punch hole depth: 60 mm • Motor power: 3 kW • Machine dimensions: 1460 × 950 × 2380 mm • Machine weight: 3100 kg Standard Equipment • Light curtains • Mechanical safety guards • Lower table ejector • CE Declaration of Conformity • Technical documentation Applications • Punching • Stamping • Bending • Forming • Sheet metal production • Metal fabrication workshops • Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.