Used Emco E 300-2000 for sale (81,153)

Year of construction: 2007, condition: ready for operation (used), X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP. Godpeg Rcf Sjfx Almobl

Year of construction: 1982, condition: used, Technical details: z-travel: 260 mm pressure capacity max.: 49 - 7355 (Prüflast) N checking height: 260 mm workpiece weight: max. 160 kg throat: 200 mm interface: RS 232 Gjdpfxju N Avxe Almjbl voltage: 230V / 50Hz V total power requirement: 200 VA machine weight approx.: 250 (ohne Unterschrank) kg dimension machine xH: 0,7x 0,6 x 1,8 (mit Unterschrank) m The hardness tester with depth measurement operating mode is on sale with a base cabinet from Emco for hardness testers. The device is suitable for testing the following methods(Specifications according to manufacturer): Metals according to Brinell, Vickers, Rockwell Plastics testing according to DIN 53 456 Other materials for testing only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, DMC and DC motor for M4R-075 = 49 to 7355 N Test table height adjustable via handwheel; Ø 90mm Test bench mounting according to DIN 51 225 = Ø 25mm Operation and programming via control panel accessories: a few test tables and plates (comparable with the pictures) *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm Gbjdpfx Aex Aq Hwjlmol bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: good (used), The scope of delivery includes: 01x Shelf connector, used Gbodpfx Alsi Enw Somol Manufacturer: Dexion type: P90 for shelf distance: approx. 300 mm total length: approx. 380 mm cross section: U 51 x 25 mm Material color: sendzimir galvanized Weight: 0,47 kg | pcs.

Condition: good (used), Technical data for the shelf connector: Shelf system: Bito Included in delivery are: 01x shelf connector, used Material color: sendzimir galvanized total length: approx. 300 mm Gbsdpfx Aljig Hv Uomjl center-center hole: approx. 260 mm profile dim.: L 50 x 50 mm material thickness: approx. 2,00 mm Weight/piece: approx. 0,437 kg

Condition: good (used), The scope of delivery includes: Gsdpfx Aoi Enyfjlmsbl 01x shelf connector, used for shelf distance: 300 mm profile dim.: U 50 x 40 mm Material color: blue Weight: 0,55 kg | pcs.

Condition: good (used), The scope of delivery includes: 01x Shelf connector, used Shelf system: Nedcon type: NS suitable for frame profile width: 100 mm for shelf distance: 300 mm Gbjdpfx Aoi Enyuolmjl profile dim.: U 65 x 40 mm weight: 0,83 kg | pcs.

Condition: used, Year of construction: 2011, EMCO Hyperturn 45 – CNC Turning Machine - Siemens SINUMERIK CNC control system - Main spindle equipped with a full clamping cylinder (operation with bar feeder not possible; loading and unloading via automatic swing loader, see video) - Year of manufacture: 2011 Technical Data Working Area: - Maximum swing diameter over bed: 430 mm - Swing diameter over cross slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar capacity: 45 mm - Distance between main and counter spindle (spindle noses): 720 mm Slide Travel Range: - Slide travel X / X2: 160 / 150 mm - Slide travel Z / Z2 / Z3: 510 / 510 / 510 mm Main Spindle (Spindle 1): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² Main Spindle Clamping System: - Hollow clamping cylinder (hydraulic) with draw tube, max. bar passage: 45 mm - Max. standard chuck size: 160 mm Gsdpfx Aoyglx Relmjbl Main Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm Counter Spindle (Spindle 2): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Z3 travel: 510 mm - Traverse speed: 45 m/min - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² - Counter spindle clamping system: hollow clamping cylinder with draw tube and integrated pneumatic parts ejector - Max. chuck size: 160 mm Counter Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm C Axes (Spindles 1 and 2): - Circular axis resolution: 0.001° - Rapid traverse speed: 1000 / 100 rpm - Spindle indexing (disc brake): 0.01° Feed Drives: - Rapid traverse X / Z: 30 / 45 m/min - Feed force X: 4,000 N - Feed force Z / Z2 / Z3: 5,000 / 5,000 / 6,000 N - Position scatter width Ps per VDI 3441 in X / Y / Z: 3 / 3 / 3 µm Turrets 1 and 2 (upper and lower system): - Radial tool turret with directional logic and driven tools - Number of tool stations per turret: 12 - Tool holders according to DIN 69880: VDI 25 - Tool cross-section (square tools): 16 × 16 mm - Boring bar shank diameter: 25 mm - Turret indexing time: 0.2 s Driven Tool Stations (coupling according to DIN 5480): - Number of driven tool stations per turret: 12 - Speed range: 0 – 6,000 rpm - Maximum drive power: 4 kW - Maximum torque: 16 Nm - Maximum duty cycle at maximum speed or power: 25% Lubrication System: - Guideways, ball screws: automatic central oil lubrication - Main spindle, counter spindle: grease lubrication Chip Conveyor: - Hinged belt conveyor, discharge height: 1,200 mm Electrical Connection: - Power supply: 400 V ~3/PE - Machine connected load: 30 kVA - Max. main fuse for the machine: 80 A - Required short-circuit power: 2,500 kVA Dimensions / Weights: - Height of spindle axis above floor: 1,126 mm - Overall height (incl. oil mist separator): 2,325 mm - Footprint (incl. chip conveyor, without cooling unit): 3,830 × 1,950 mm - Net weight of the machine without chip conveyor: 4,200 kg Sound Pressure Level: - Average sound pressure level: 78 dB(A)

Condition: good (used), Welding rotary table Protec KT 2000 A Load capacity 2000 Kg Infinitely variable inclination angle 0 to 120 ° Gjdpspdqfrofx Almobl with hand and foot remote control Height horizontal 1200mm Height tilted to middle 1000mm Special design welding current transmission 800 Ampere length 1700mm, width 1200mm

Condition: excellent (used), • Manufacturer: ABUS KG – Germany • Type: K-300 1-4 • Motor power: 3.8 kW • Power supply: 400 V / 50 Hz • Equipped with an electromagnetic brake – braking torque 90 Nm • Gear shaft – diameter approx. 34 mm • Mounting: square flange • Robust industrial design, dedicated for use in ABUS cranes and hoists • Condition: used, fully operational (actual photos) Gbsdpfjxbfutex Almol

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control Very Good CONDITION CE-Compliant!! Technical Data: >> Year of manufacture: 2008 Machine No. BA1DW2501 >> Milling table clamping surface: 800 x 400 mm Gbedpjwxxdfjfx Almol Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Max. load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed: 10–2000 mm/min Rapid traverse X: 5000 mm/min >> Travel X/Y/Z: 450/350/400 mm >> Vertical and horizontal spindle – SK40 >> Hydraulic drawbar system >> Quill stroke: 80 mm >> Weight approx. 2000 kg >> Dimensions approx.: 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged safety enclosure >> Coolant system >> Machine lamp >> Dividing head with tailstock >> Counterholder >> Röhm machine vice About the machine: For sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a government facility where it was only used occasionally. The control system is very user-friendly. Furthermore, the machine is equipped with hydraulic clamping in both vertical and horizontal modes. Switching from vertical to horizontal operation is very simple by folding away the vertical head. The Emco has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our location.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Universal Milling Machine Emco C40 Linear with Digital Display and Path Control, Excellent Condition, CE Compliant! Technical Data: >> Year of manufacture: 2008 Machine No.: BA1DW2503 >> Milling table clamping surface: 800 x 400 mm Gedpfx Alswxxd Ejmebl Clamping slots: 8 Slot width: 14 H 8 Slot spacing: 50 mm Maximum load: 300 kg >> Infinitely variable spindle speeds: 10–5000 rpm >> Infinitely variable feed rate: 10–2000 mm/min Rapid traverse X-axis: 5000 mm/min >> Travel (X/Y/Z): 450/350/400 mm >> Vertical quill and horizontal spindle – ISO 40 (SK40) >> Hydraulic pull-in system >> Quill stroke: 80 mm >> Weight: approx. 2000 kg >> Dimensions (LxWxH): approx. 2.5 x 2 x 2 m >> Main drive motor: 7 kW >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Hinged enclosure >> Coolant system >> Machine lamp >> Indexing/Dividing attachment with tailstock >> Steady rest >> Röhm machine vice About the machine: Offered for sale is a universal milling machine Emco C40 Linear with path control. This universal milling machine is in almost as-new condition. It comes from a governmental facility where it saw only limited use. The control unit is very user-friendly. Additionally, the machine features hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal setup is very straightforward by simply swinging away the vertical head. The Emco has been both mechanically and electrically inspected by us. Take the opportunity to view and test the machine under power at our location.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm Gbsdpfxswag Sts Almol >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected Godpfx Aoycvaqjlmebl - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Gsdpfxodctnbs Almebl Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Description WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT Description For sale: Well-maintained EMCO Hyperturn 665 MC Plus IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Gedpfx Aevk E Atslmsbl Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request! TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Controlled in 8 axis - x1-x2-z1-z2-c1-c2-y-b axes Accessories: BAR FEDER AND HUGE LIST OF TOLLINGS ON PHOTOS Length: 3400 mm + convoyer , Height: 2300 mm, Width: 2550 mm, Weight: 7600 kg

Condition: excellent (used), Viessmann Vitoplex 300/720 kW/low-temperature/heating boiler/available with oil or gas burner upon request Gsdpfxjxv Exbe Almjbl

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Gedpsq H Shcefx Almobl Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: used, functionality: fully functional, power: 147 kW (199.86 HP), fuel type: diesel, overall weight: 18,200 kg, Year of construction: 2000, operating hours: 12,370 h, JCB 456B Wheel Loader Year of manufacture: 2000 12,370 operating hours Total weight: 18,200 kg 147 kW 1x bucket GOOD CONDITION Export net price: €18,500.00 All information provided without guarantee / subject to errors and omissions. Gedswk Evfopfx Almjbl

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 340 mm turning diameter over support: 190 mm turning length: 700 mm centre distance: 700 mm revolution per minute: 55 - 2350 / 8 step mechanisch U/min spindle bore of work spindle: 50 mm tailstock quill adjustment:: 120 mm tailstock quill: MK3 mm max. torque on the spindle: 350 Nm max. workpiece weight -without tailstock: 50 kg total power requirement: 3,0 kVA weight of the machine ca.: 0,79 t dimension machine xH: 1,6 x 0,9 x 1,4 m Accessories: comparable in the picture 2x steady rest (1x closed and 1x open) various tips various lathe chucks and jaw pairs Gedpfx Aju Ixw Ajlmjbl *

Condition: excellent (used), Year of construction: 2001, Boiler Vitoplex 300 130Kw Used Year: 2001 Type: TX3 Output: 130Kw Viewing by telephone only! Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Godpfx Astu Txhelmebl Loading possible Request more information

Condition: like new (used), Year of construction: 2001, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 50 mm, turning diameter over bed slide: 350 mm, turning length: 700 mm, total length: 1,650 mm, total width: 1,050 mm, total height: 1,650 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - electrical diagram - multifix tool holder with 3 holders - coolant system - machine lighting Gsdpfxjwy Hvxe Almsbl - live center - bed stop - machine feet

Year of construction: 2000, condition: good (used), Vitronics Soltec reflow oven, type: 6638 Quantis Pro Gjdeq I Shajpfx Almobl

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: SRS CW 2000 2025/1, control type: manual, degree of automation: semi-automatic, actuation type: electric, laser source manufacturer: Raycus / JPT, laser power: 2,000 W, laser wavelength: 1,080 nm, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: AC, type of cooling: water, compressed air connection: 5 bar, overall weight: 175 kg, warranty duration: 36 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, We offer equipment for cleaning and processing metal, stone, and concrete surfaces. Delivery is available within Germany and Austria. As a service provider specializing in surface processing, we can offer you machines tailored to your requirements! Transport costs: Depend on your location and delivery terms Delivery: 4 weeks (working days) after receipt of payment via air freight - Air freight duration: approx. 2 weeks The equipment is NEW and is configured and set up according to customer specifications! Configuration and pricing depend on the customer's requirements and application area. Gjdpetxlyrsfx Almjbl We offer professional training in the operation of the equipment in compliance with UAVA/UVV regulations in both Austria and Germany. As we are a service provider with hands-on experience using our equipment, we can guarantee their functionality. We provide comprehensive on-site instruction, workshop-based training, or customer-specific demonstrations. Payment options: RENTING / LEASING / PURCHASE Technical specifications: Model: RST-FLC-2000W 2026 Laser: Fiber laser Laser power: 1000W / 2000W / 3000W (or Laser: Pulsed 100W to 1000W) Laser wavelength: 1064nm or 1080nm±5 Frequency: 10–50KHz Air or water cooling Net weight: approx. 170kg Dimensions: 98 × 122 × 143 cm Scan width: 5–50 cm Functions: Handheld or automatic Operating temperature: 0–40°C Operating mode: CW Wavelength (nm): 1025–1070 Standard output power: 15KW Laser beam quality (mm*mrad): 4 Adjustable frequency (Hz): 400 to 50,000 Transmission fiber diameter: 50/100 Output power stability: ±2 Power supply: 250V / 16A Operating temperature (°C): 5~35 GUARANTEED at the best price! – RENTING / LEASING / PURCHASE All devices are individually assembled and delivered according to your requirements and our experience. – Product demonstration – 24-hour support – Includes maintenance, service & repair We also provide: INDIVIDUAL training in accordance with the UAVA / UVV safety regulations for commissioning laser machines for surface processing. Comprehensive safety consulting regarding the use of laser equipment in compliance with occupational and safety regulations. Routine inspections in accordance with applicable safety standards.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 17,300 h, functionality: fully functional, machine/vehicle number: Q4A124301, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Godpfxoxa Araj Almebl Working Area Travel X-axis: 350 mm Travel Y-axis: 250 mm Travel Z-axis: 300 mm Min. distance spindle nose – table: 120 mm Max. distance spindle nose – table: 420 mm Table Clamping surface: 500 x 300 mm T-slots (number/size/pitch): 5x 45x100 mm Max. table load: 100 kg Table – floor distance: 880 mm Spindle Speed range: 50 – 10,000 rpm Spindle motor power (S6): 8.5 kW Spindle torque (S6): 41 Nm Tool holder: ISO 30 Tool Change Number of tool stations: 20 Max. tool diameter: 63 mm (without adjacent tools) Max. tool length: 200 mm Max. tool weight: 5 kg Tool change time: 2.5 s MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 1,600 x 1,700 x 1,980 mm Weight: 1,970 kg Power supply: 9 kVA Operating hours: 17,300 h EQUIPMENT 30 holders 2 Gressel vices Note: The machine will remain powered until 21.09.2025.