Used Feller Engineering Mcs 15 for sale (32,729)

Year of construction: 2018, condition: ready for operation (used), Rotation axis: 360°, max. rotational speed: 60.000/min, including accessories and documentation. Hfsdpfxeihp Ipe Ac Nsh

Condition: new, TECHNICAL DATA Hjdpfx Aofbgz Ijc Nofh Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: new, Electrically heated continuous furnace, make VEI-Engineering type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7 Hfedpfx Aod Sg Hhec Noh

Condition: new, Gas-heated bogie hearth drying oven (not for flammable paint) temperature max.: 420°C burners heating power:300 kW divided on 2 burners / zones circulation fans: 2 x 5,5 kW = 11 kW el. total connected load: approx. 15 kVA control zones: 2 PLC: Siemens S7 approx. external dimensions (w x h x d): 4700 x 4200 x 6000 mm length with extended bogie hearth: 11.000 mm internal dimensions (without bogie hearth) width: 4000 mm Hsdpfx Acecmrxde Nofh hight: 2900 mm (2500 mm usable with bogie hearth) lenght: 4000 mm max. charging weight:20.000 kg net

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) Hfedpfjrt U Nujx Ac Noh (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Hodpfx Ajyfmn Roc Njfh

Condition: excellent (used), Year of construction: 1997, Equipment: type plate available, GUTH ENGINEERING Mixing Tank 300 L Pressure-resistant magnetic stirrer with heating jacket Tank capacity: 300 litres Jacket capacity: 33 litres Hedpfx Acsw U Sw Aj Nefh Usable volume: approx. 50-250 litres Product-contact parts made of stainless steel Operating overpressure: inside: -1 / +3 bar, jacket: -1 / 5 bar Year of construction: 1997 Space requirement: 120 x 90 x 210 cm

Condition: excellent (used), pure engineering Type: pureGMC18 System for manual weighing processes Climatic chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specially designed for the gravimetric determination of particulate emissions in exhaust gas analysis Hedpjlddmzjfx Ac Nofh and fulfills the normative requirements of the environmental authorities. All necessary climate control components are integrated. In combination with the HEPA filter, a contamination-free and precisely and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-decoupled granite for low-vibration installation of an ultra-microbalance Ionization device against static charge Flow protection for shielding the load cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, earthing bolt Advantages: Meets normative requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45%r.H ± 3% Dimensions W/D/H 1,800/800/1,980 mm Clean room class 5 (ISO14644-1) Power supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vision Engineering Specifications of the microscope from Vision Engineering: Eyepiece-less Three-dimensional viewing x3.5 - x120 stereo zoom magnification Features: Optical type: Application laboratory, inspection, for research purposes, forensic medicine, for dental laboratory, for welding work Observation technology 3D Configuration Desktop device Options and accessories USB camera, zoom Magnification Min: 3 unit Max: 240 unit Description: Lynx EVO is designed to increase productivity and efficiency through superior ergonomics. Regardless of the challenge - inspection, rework or refurbishment high resolution and high contrast 3D stereo images, you will work more comfortably and and more concentrated. Magnifications from 2.7x to 240x make it ideal for a wide range of applications. Greater efficiency: Lynx EVO offers improved hand-eye coordination, more working space for tools and better peripheral vision for easy interaction with the wider working environment and transforms the way you work. With no eyepieces to adjust, you can easily share between multiple users, to get maximum return on your investment. Condition: used Scope of delivery: (see picture) Hfjdpfx Acstqnkls Nsh (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Used agitator tank with insulation on castors Electric heating does not work! Item number: 10784 Last use: Pharmacy Volume: 300 liters Type: Upright on 4 castors Material (wetted parts): 1.4571 / AISI316 Version: with insulation Operating pressure according to type plate: +0.5 bar Max. Max. operating temperature: + 95 °C Tank dimensions: Manhole: 410mm Inner diameter: 700mm Outer diameter: 800mm Hodpfxerl Rtue Ac Njfh Height of the feet: 870mm Total height: 1700mm Total width: 870mm Total length: 950mm Cylindrical height: 650mm Materials: Interior: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Type plate: Yes Outlet diameter: DN25 Distance drain to floor: 365mm Propeller agitator Empty weight: 184Kg

Condition: used, Vertical +-90°. Horizontal radial +-90 Axial horizontal +-45 Hsdpfx Aowyaixjc Nofh Engine power 5.5 kW LAFERT Saw blade diameter fi.565x30mm (standard 500x30mm) Cutting length up to 960mm Cutting height up to 195mm (with 565mm saw blade) Cutting height at 45° up to 115mm 380V

Year of construction: 2015, condition: used, external dimensions: lenght: 3900 mm Hfedpfx Asclupdjc Neh width: 1320 mm height: 1090 mm (above base frame) muffle lenght: 3960 mm mesh belt: 480 mm width clear height 140 mm max. furnace area temperature: 750°C max. temperature inside the muffle: 700°C water cooled ventilators : 3 electrical connected loads: three-phase: 3 x 400 V, 50 Hz power consumption: 75 kVA heating power, 3 zones each: 24 kW = 72 kW PLC : Siemens S7

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 565 kg, fuel type: diesel, tank capacity: 38 l, color: beige, power: 12.06 kW (16.40 HP), output current: 21 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 11.6 kW (15.77 HP), nominal power (apparent): 15 kVA, continuous power: 10.4 kW (14.14 HP), continuous power (apparent): 13 kVA, total length: 1,850 mm, total width: 850 mm, total height: 900 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Perkins, type of cooling: water, AKSA AP 15 Perkins PRP output: 10.4 kW / 13 kVA ESP output: 11.6 kW / 14.5 kVA Engine: Perkins 403A-15G1 Emission level: Stage 2 Speed: 1,500 rpm Mechanical governor Operating voltage: 12 V Cooling: water-cooled Generator: Stamford or equivalent Voltage: 400/231 V Voltage regulator: AS540 Control panel: DSE 6120 – emergency automatic start Battery charger: 5 ampere Type: Canopy unit; weatherproof, soundproofed Emergency stop switch Radiator with mechanical fan Base frame construction with integrated fuel tank (38 L) and vibration dampers Coolant preheating Hfodpswu Dbuefx Ac Neh Voltage and frequency regulation according to ISO 8528-5 Unit suitable for stationary use only Please note that, in accordance with the applicable EU regulation, these units are not approved for mobile use. The units are sold as B-stock. B-stock means the units may show cosmetic defects such as minor rust, or rust on the housing. These defects do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the described characteristics and the associated condition of the units.

Condition: new, Technical data: Hodpfxev Iz N Rs Ac Nsfh Number of rollers: 4 Roller size: 120 x 60 mm Maximum stroke: 20 mm Number of gears: 8 Feed speed: 2-4-5.5-6.5-11-13-16.5-33 m/min. Distance between rollers: 133-143-145 mm Distance between first and last roller: 421 mm Engine speed: 1400/ 2800 rpm. Total power: 0.75 kW

Condition: new, Technical data: Number of rollers: 3 Number of gears: 4 Feed speeds: 4-8-11-22 m/min Roller size: 120/60 mm Max roller stroke: 20 mm Distance between rollers: 133-153 mm Hfjdpfx Aev Iz Itec Njh Distance between first and last roller: 286 mm Total power: 0.75 kW Engine speed: 1400/2800 rpm

Condition: new, MAIN FEATURES OF THE MACHINE: -Single head drilling machine for drilling in the range of 0 - 90 °. -Pneumatically adjustable head angle -Cast-iron spindles -Spindles adapted for quick-connections -Pneumatic material clamps -Cast iron working table -Fast and accurate adjustment -Precision drilling STANDARD EQUIPMENT OF THE MACHINE: -2 1.5 m long aluminum rulers (right and left) with two stoppers -5 quick-action chucks Hfsdsp Ecdgepfx Ac Nsh Technical data: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic presses: 2 Distance between centers of individual spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Rotation: 2800 rpm. Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm

Condition: new, MAIN FEATURES OF THE MACHINE: Hedpfjh Dzr Ajx Ac Nofh -Single-head drilling machine for drilling in the range of 0 - 90 ° -The inclination angle of the head is pneumatically adjustable -Possibility to set the side stops with an accuracy of 0.1 mm -Security handles allow the panels to be quickly positioned without adjustment -Patented pneumatic material clamps -A cast iron head that guarantees damping of all vibrations - MDF work table -Quick and accurate adjustment -Precise drilling -Quick change of drills with quick couplers -Spiral System- a device for quick adjustment of the drilling depth Technical data: Number of spindles: 29 Distance between first and last drill bit: 896 mm Distance between centers of individual spindles: 32 mm Number of pneumatic clamps: 2 Max workpiece size: 1142 x 3000 mm Max element thickness: 70 mm Working pressure: 6 - 7 bar Noise level: 76.1 dB Air consumption: 10 l / cycle Engine power: 1.5 kW Revolutions: 2800 rpm. Overall dimensions: Length: 1507 mm Width: 960 mm Height: 1265 mm

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Hodpexcal Aofx Ac Nsfh The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Hfjdpfx Asxcalcoc Nsh The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Condition: repair required (used), feed hopper / buffer hopper Hfedpfx Ajwydmnjc Njh

Condition: new, Year of construction: 2025, Laser source: 3kW Raycus Laser head: Raytools autofocus Control system: FSCUT 5000 A Hfodpfxei Arwle Ac Njh Loading of tubes up to 6400 mm long, unloading up to 4000 mm Positioning accuracy: ±0.05/1000 mm Acceleration: 1 m/s² Speed: 120 rpm Max. Positioning speed: 100 m/min Max. Max. weight of a pipe: 250 kg Pipe diameter: 15-230 mm Total machine size: 12728 × 3400 × 2450 mm

Condition: used, Maggi Best 960 IDC000099 Hedpfx Aou Dh Hlsc Nefh

Condition: used, Year of construction: 2018, functionality: fully functional, number of spindles: 35, SECOND-HAND MULTISPINDLE DRILL WITH 35 SPINDLES MAGGI BORING SYSTEM 35 YEAR 2018 - Center distance 32 mm. Hsdpfjx Rcqgsx Ac Nefh

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical Hfedpou U Hgijfx Ac Njh N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: new, functionality: fully functional, overall weight: 1,300 kg, Year of construction: 2025, Mobile vibrating screener on a trailer of category O2, can be supplied with lifting chains and a petrol generator. Very easy to use. Quick change of meshes. Built-in conveyor for fine fraction. Hsdpfjxpg I Rex Ac Nsfh