Used Frank Floor Grinding for sale (13,709)

Condition: used, Year of construction: 2001, Technical details: grinding length: 2500 mm grinding width: 800 mm workpiece height: 800 mm Table movement horizontal: Längshub: 2700 mm Table movement horizontal: Querhub: 800 mm Pjdpfx Aovbgr Rei Togu table speed: längs: 1 - 35 / quer: 0 - 3 m/min feed: vertical: 0,001 / quer: 0,0025 mm/Hub magnetic plate size: 2500 x 800 mm Automatic grinding wheel feed: 0,001 mm distance table - spindle center: 900 mm grinding spindle speed: k.A. U/min dimensions of grinding wheel: 400 x 76 x 127 mm total power requirement: 36 kW weight of the machine ca.: 13,5 t dimension machine xH: 7,5 x 2,8 x 2,7 m dimension coolant device LxWxH: 1,8 x 1,0 x 0,92 m dimensions of hydaulic: 1900 x 800 x 1500 mm transport measurements machine: L: 8,0 x B: 2,4 x H: 2,85 m The machine is currently in the technical department. technical features: -Hydraulic unit -dressing device *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Pgodpfx Aisvc Apbe Tju Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: used, Year of construction: 1973, Technical details: Pgodexu Dv Aopfx Ai Tju grinding length: 400 mm grinding width: 200 mm workpiece height: 300 mm dimensions of grinding wheel: 275 - 315 mm magnetic plate size: 400 x 200 mm max. table load: 200 kg weight of the machine ca.: 1,6 t dimension machine xH: 1,55 x 1,45 x 2,20 m

Condition: used, axle configuration: 3 axles, first registration: 02/2004, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,740 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6920 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2004, Axle type: BPW = Further Information = General Information Cab: Day cab Registration: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Weights Pjdpfxez Il T Te Ai Tjgu Unladen weight: 6,920 kg Payload: 32,080 kg GVW: 39,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 08/2027 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • Good price • Honest business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request via our website. Inquire directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, • Year 2004 Pedozcvakjpfx Ai Tjgu • In our possession since 06/2023 • Complete clamping system, with two modified clamps for Ø14 and Ø16 • Automated pallets with diameters of Ø3, Ø4, Ø6, Ø10, Ø12 • Various grinding wheels for roughing and finishing, some new, for both carbide and HSS • Parkair electrostatic dust extractor • New user interface keyboard (3-4 years old) • New workpiece rotation belt (replacement due in 2025) • Less than 100 operating hours since 2023 • Dedicated Transor filtration tank, year 2007, maintained with filter changes and complete functionality check, with service performed in 07/2023 (over €3000 + VAT), less than 100 operating hours since the maintenance -separate sale can be considered- • Machine price: €25,000 - Filtration system price: €10,000

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, table length: 1,500 mm, table width: 200 mm, overall weight: 2,500 kg, grinding spindle motor power: 11,000 W, grinding spindle speed: 1,450 rpm, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion Pgodpfx Aoxmhyisi Teu - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Year of construction: 2021, condition: new, Conversion kit for JUNG HF50, changing from Leonhardt-type control to thyristor control. On-site installation is also possible. Pgjdpfohcn Hyex Ai Teu

Condition: excellent (used), Year of construction: 1993, grinding diameter max. 100 mm Pgedpfx Aez S Nymsi Tou max. width of grinding wheel 230 mm

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,770 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 7580 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body construction year: 2005, Side wall material: Tarpaulin, Sliding roof, Axle type: BPW, HARD WOOD FLOOR // HARDWOOD FLOOR = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Axle 3: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm Weights Unladen weight: 7,580 kg Payload: 31,420 kg GVW: 39,000 kg Functional Loading platform height: 124 cm Sliding roof: Yes Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! Pgjdpfx Asz Rvp Ssi Tju • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1980, workpiece length 2700 mm swing dia. 630 mm clamping length 2700 mm stroke position adjustment 40-130 mm grinding wheel diameter 1000 mm weight of the machine ca. 18,5 t dimensions of the machine ca. 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools Pgodoyukdzjpfx Ai Tju steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2008, Various industrial polishing, sanding, grinding, and sawing machines Due to the cessation of our business operations, we are offering a range of professional metalworking machines for sale. These machines come from our own production environment and can be acquired individually or in combination. The range includes polishing, sanding, and grinding machines, supplemented by various other workshop machines. The photos show, among other things: - Double polishing/grinding machine - Belt sander - Vertical sanding/grinding machine - Column drill - Various industrial band saws - Various related tools and accessories Including machines/equipment from Slijp Machinefabriek IJmuiden, Marpol, Bauer Maschinenbau, and Hugo Schneider. The machines have been used for professional metalworking and are suitable for, among other materials, aluminum, steel, and stainless steel, depending on the specific machine and the tools used. Pgsdpfx Aisz H R Rbe Teu Machines can be inspected by appointment. Purchasing multiple machines together is negotiable. Price: upon request / offers per machine If you are interested, please specify which machine you are referring to. Additional photos, data, and information are available upon request.

Condition: used, Second-hand spindle for machines with an MK mount, designed for professional woodworking. The spindle is suitable for writing tasks. Includes a pack of various Fladder sanding papers. Psdpfx Aioz Iwncs Tjgu Technical data: - Mount: MK5 - Clamping length: ~ 65 mm - Flight circle: ~ 100 mm

Condition: used, machine/vehicle number: WFDFLT33903000213, empty load weight: 7,287 kg, maximum load weight: 27,713 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 13,550 mm, loading space width: 2,470 mm, loading space height: 2,793 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R22,5", color: green, Please note: archive images! Vehicle may currently be in use! #Chassis – haulage semi-trailer - Fine-grain steel welded construction, lightweight design up to the landing legs - Fifth-wheel plate with replaceable 2" kingpin - Preparation for lashing eyes in the floor at the sides - 24 t 2-speed landing gear, one-side operation, with straight lower section - Pull-out ladder at rear - Side-mounted door stays - Wheel chocks with holder - Aluminium side underrun protection - Steel rear underrun protection with wide Fliegl mudflaps - Quarter-shell mudguards - Rear ram protection (corner protection) - Aluminium ladder 3300 mm, with side-mounted holder - Tarpaulin pole with holder - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm #Axles + suspension - SAF disc brake axles with 430 mm disc diameter, air suspension - 1st axle: automatic lift axle incl. forced lowering and traction help, actuation "3x braking" #Braking system - Dual-line air brake system, spring brake parking brake - 2 non-interchangeable coupling heads at front - EBS (electronic braking system) with EBS socket at front Pgsdpfx Aez Ti A Dsi Teu - Raise & lower valve - Vehicle stability system #Wheels and tyres - 385/55 R22.5", make at manufacturer's choice - Steel rims, factory silver #Electrics - 24 Volt, multi-chamber lamps - Yellow LED side lighting - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin non-interchangeable sockets at front #Moving floor – hydraulics - Hydraulic cylinders with sliding mechanism installed in the floor - Dual-circuit hydraulics - Forward/reverse switching and on/off electrically via radio remote control - Drive system make Keith Runningfloor - Moving floor power supply via sidelights - Hydraulic operation via truck PTO - Hydraulic connection with hose at front wall and screw-type plug of high-pressure rotary coupling NB = 48 mm - Note: dual-circuit hydraulic system required! - Recommended pump output: max. 223 ltr/min (180 ltr/min recommended) - Pressure: max. 210 bar - Oil tank capacity: min. 200 ltr #Moving floor – floor - Moving floor with rear wear plate, Running Floor - Aluminium floor slats, 6 mm floor profile, ribbed design - Prepared for retrofitting a floor protection sheet #Moving floor – body - Aluminium box body made of high-quality, abrasion-resistant material - Front and side walls of aluminium hollow profiles, welded all round at the top to a wide special aluminium reinforcement profile, welded into a special frame at the bottom - Moving inner bulkhead (travels with the floor) for better unloading - Reinforced tarpaulin flaps at bottom - Hydraulic rear wall with large upward opening, robust design, with radio remote control, operable only with roof open - Standing platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roll-up roof tarpaulin - Removable, swivelling cross bows for tarpaulin support + tarpaulin support at front on front wall and at rear on rear wall - Hydraulic roof with tarpaulin, operable via radio remote control #Registration / plates - Germany - With Dekra inspection and expert report Please note: archive images!

Condition: good (used), functionality: fully functional, universal grinder BHU 32/1000 Pgedpfx Ao Aaybioi Tou

Condition: good (used), Year of construction: 2006, 1 used surface grinding machine Manufacturer: PROTH Type: PSGS-3060 BH Serial No.: 0G02G-05 Year of manufacture: 2006 Technical data Grinding wheel diameter: approx. 400 mm Magnetic chuck: approx. 600 × 300 mm Control system: PROTH Podpfx Aoz S Ud Dji Togu Hydraulic unit: included Equipment Magnetic chuck for clamping ferromagnetic workpieces Hydraulic unit PROTH control system

Condition: new, STRUERS Grinding and Polishing System Struers LaboPol-30 with LaboForce-100 and LaboDoser-100 Laboratory grinding and polishing system with extensive accessories For sale is an unused, unassembled grinding and polishing system from the manufacturer Struers. The LaboSystem is suitable for reliable and fast manual or semi-automatic grinding and polishing of samples in the laboratory and in production. Technical data: Manufacturer: Struers Type: LaboPol-30 Article number: Type of equipment: Grinding and polishing machine Power connection: 200–240 V / 50–60 Hz Automatic sample mover: Struers LaboForce-100 Article number: Power supply: 1 × 24 V DC Dosing unit: Struers LaboDoser-100 Article number: Version for square bottles Grinding and polishing disc: MD-Disc with conical mount Diameter: 300 mm Article number: Sample holder plate: Specimen Mover Plate 6 × 40 mm Article number: Equipment: LaboPol-30 grinding and polishing machine LaboForce-100 sample mover LaboDoser-100 dosing unit MD-Disc carrier disc, 300 mm Specimen Mover Plate, 6 × 40 mm Coupling for sample holder plate Glass desiccator, 250 mm, according to parts list Bottle set Service kit LaboPol-30 MD-Concert storage box Areas of application: Material testing Metallography Sample preparation Pgodoz Srm Nspfx Ai Teu Grinding and polishing Laboratory applications Quality assurance Research and development Industrial material testing Scope of supply: 1 × Struers LaboPol-30 – Art. No. 1 × Struers LaboForce-100 – Art. No. 1 × MD-Disc, 300 mm – Art. No. 1 × Specimen Mover Plate, 6 × 40 mm – Art. No. 1 × Coupling for sample holder plate – Art. No. 1 × Struers LaboDoser-100 – Art. No. 1 × Glass desiccator, 250 mm – Art. No. DE-720405 1 × Bottle set – Art. No. 1 × Service kit LaboPol-30 – Art. No. 16332999 1 × MD-Concert storage box – Art. No. Condition: New / unused Equipment has not yet been assembled or put into operation Main equipment in original transport packaging Optical condition and accessories as shown in the pictures The system has not yet been assembled and is in storage. Assembly and commissioning are not part of this offer and must be organized independently by the buyer. The image of the fully assembled system is an EXAMPLE IMAGE. The original photos show the actual delivery condition. The workbench shown and other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Weighing terminal, floor scale, pallet scale 9013, scale 1.5T, Soehnle Professional 2790 The SOEHNLE 2790 display unit is very easy to handle and, in addition, is protected to IP65, which means it can be used without any problems even in wet areas. With only five buttons, the SOEHNLE 2790 digital display unit is particularly easy to operate. The integrated functions are on/off, tare, tare delete, zeroing and printing. In addition, the 2790 display unit also has a function for piece counting. The SOEHNLE 2790 display unit can be operated not only with the 230 V power supply included, but also independently of the mains for up to 100 hours with batteries. The 20 mm high digital display is backlit during mains operation and is therefore particularly easy to read. When operating on battery power, an automatic shut-off function can also be set to conserve the batteries. Soehnle Professional 2790 Weighing terminal Technical data > Housing made of anodized aluminum, with injection-molded parts made of polyamide > Dimensions: L 306 x W 77 x H 82.6 mm > Connection for one scale with strain gauge load cells > Load cell supply voltage: 4 V, approx. 67 Hz rectangular > Measuring voltage: 0.2 - 12 mV > Smallest input signal per calibration value: 0.4 µV > Load cell impedance range: 87-1,200 > Load cell connection: 4- or 6-conductor > Temperature range: -10 to +40°C > Weighing ranges: 0.1-100,000 kg > Mains operation via plug-in power supply Input 230 V AC, 50 Hz, Output 9 VDC, 300 mA Pgjdpfxsd Sfb Ie Ai Tou > Battery operation for approx. 160 hours with 4 mignon batteries 1.5 V > Auto-off function (time adjustable) Floor scale Soehnle 9013, year of manufacture 2008 Weighing platform 150x125 cm up to 1500 kg The floor scale can be used in a temperature range of -10 °C to +40 °C The floor scale is ready for use immediately after installation Maintenance-free weighing technology from SOEHNLE More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 1999, KBN 560 (Ecostar) HSS and segmented circular saw blade grinding machine (CNC controlled) Suitable for the automatic grinding, re-tooth cutting and beveling of HSS and segmented circular saw blades, as well as carbide-tipped circular saw blades, using the deep grinding process with CBN or diamond grinding wheels. Technical data: Working range: Diameter (20) 80 - 560 mm, tooth pitch 1 - 25 mm, number of teeth 2 - 998, saw blade thickness up to 8 mm; Grinding wheels: Grinding wheel diameter 200 mm, grinding wheel bore diameter 32 mm, connection value 5.5 kW (400 V / 50 Hz), weight approx. 980 kg, dimensions W x D x H = 1600 x 1750 x 1996 mm, color blue RAL 5014 / gray RAL 7035. Psdpo Aba Rmofx Ai Togu Accessories: Full enclosure, wet grinding system, automatic central lubrication, program for beveling regularly toothed saw blades, Vario-Zahn software for the automatic grinding of different tooth pitches, measuring grinding program for grinding saws to the same outer diameter, special program for full carbide teeth, machine light. Optional accessories: Extraction system, grinding wheel flange, holder for small saws. Condition: The machine is in good technical condition. Please refer to the attached photos and video for further details regarding the condition.

Condition: used, Diskus Werke DSH 600/1000 Surface Grinding Machine This machine type is a machine with a motor-driven grinding spindle. The workpieces are clamped and ground using clamping devices adapted to the specific task. The devices are attached to the machine bed. The column carriage, on which the motor spindle is mounted, serves as a feed, dressing, and oscillating slide. Manufacturer: Diskus Type: DSH 600/1000 Operating voltage: 380 V DC voltage: 24 V Control voltage: 220 V Rated power: 27 kW Rated current: 56 A Year of manufacture: 1964 Condition: used You can find more items – new and used – in our shop! Podpfx Ashtyudei Tjgu International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Listing Title INTERMAC Vertmax 2.6 Vertical CNC Glass Working Center (2019) – 60 kW / 11,000 kg Pjdpe Af Ha Aefx Ai Tsgu Key Technical Data Category: Glass processing machinery / Vertical CNC Machining Center Manufacturer: INTERMAC (Biesse S.p.A. Glass & Stone Division, Italy) Model: VERTMAX 2.6 Year of construction: 2019 Serial number (Matricola): 1000029696 Total power: 60 kW Power supply voltage: 400 VAC / 3-phase / 50 Hz Full-load current: 112.03 A Pneumatic air supply: 7 bar Water supply pressure: 3 bar Total machine weight: 11,000 kg Certification: CE compliant Condition: Used, excellent / very low working hours, fully assembled Machinery Overview & Specifications High-Speed Vertical Processing: Capable of complete glass edge processing in a single pass: grinding, polishing, milling, drilling, countersinking, and hardware notch cutouts. Vertical layout minimizes footprint, prevents scratches during handling, and allows easy pane inspection. Maximum workable glass height: up to 2,600 mm (Vertmax 2.6 series). Tool Management & Clamping:Integrated multi-position automatic tool change magazine. Heavy-duty motorized suction cup vacuum clamping carriage for total stability during high-speed cutting and milling operations. Handling & Support System:Motorized infeed and outfeed vertical roller conveyors with non-marking support pads. Complete closed-circuit cooling water management and drainage connections. Control Terminal:Freestanding ergonomic PC control console equipped with graphical user interface, color display, and intuitive machining macro software

Year of construction: 2023, condition: new, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. - Mobile and compact setup Pjdpsixz Hdofx Ai Togu - Standard with vacuum system 2.2 kW - Optional with 2 or 4 electromagnets - Equipped with 2 grinding heads - Bracket with double hand control (CE marking) - Workpiece width: max. 780 mm / length unlimited - Power consumption of machine: 400 V, 50 Hz, 10 A, 6 kW - Dimensions: 1435 x 1100 x 1510 mm (L x W x H)

Condition: reconditioned (used), Year of construction: 1988, Graver grinding machine Make: Deckel Model: S0E Year of manufacture: 1988 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Pgodolxpfmjpfx Ai Tsu Guarantee: 12 months single shift from delivery For machines located outside of our Northern Bavarian sales area, the travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Pulling tool - Operating instructions Incl. installation of an on/off switch with undervoltage release to implement restart protection e.g. in the event of a power failure or pulling the power plug incl. production of a mounting adapter plate Used as seen The machine is technically corresponding to the state of the year it was built.

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: limited functionality, operating hours: 40,000 h, overall weight: 3,700 kg, Equipment: documentation/manual, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same complete condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together. Pgsdpfx As Afb Eyji Tsu

Condition: used, Year of construction: 1981, functionality: fully functional, overall weight: 4,800 kg, total height: 1,800 mm, total width: 3,500 mm, total length: 3,200 mm, Grinding machine NILES ZSTZ 315/630 C2 Max. wheel diameter: 315 mm Max. module: 10 Podpjz Tc Akofx Ai Togu Min. module: 1.5 Max. gear width: 160 mm Max. workpiece weight: 200 kg Engine power: 8 kW Machine dimensions: 3.2 x 3.5 x 1.8 m Machine weight: 4.8 t

Condition: used, axle configuration: 3 axles, first registration: 03/2020, total length: 14,010 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 9,110 mm, Equipment: ABS, = Additional options and accessories = - Air suspension = Further information = Unladen weight: 7,840 kg Payload: 34,160 kg GVW: 42,000 kg Pjdpoz Hfbhofx Ai Tjgu Damage: none License plate: OS-15-GB