Used Herber Tube Bender for sale (2,668)

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional Lsdpfenh R Ekox Akuohg OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 54 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, bending radius (min.): 9 mm, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Ljdjndn Agopfx Akujhg Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. Ledpfx Akonfvx Noujhg The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV Lhjdpfendk N Aox Akujg - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch Lsdpfx Asng A R Sskujhg - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE PRACTICAL HAND BENDING DEVICE: The compact, mobile design allows precise and repeatable bending in the vice. Drive is provided by a screw-in handle. A lockable adjusting ring ensures repeatable bending. The exchange of the plug-in tools is conceivably simple. The principle of "stationary tube and rotating tool" allows bending with the smallest possible footprint. For thin-walled tubes, sliding shoes are used for crease-free bending in order to produce bends with the least possible deformation from, for example, stainless steel and copper tubes. The optional version with a hexagonal mount allows the drive force of the 3000 and 6000 bending systems to be used in addition to the vise. For this purpose, the KBV is simply placed on the bending shaft of the machine. POSSIBLE APPLICATIONS: - Hydraulic piping - prototype construction - Sanitary and heating construction TECHNICAL DATA: - Bending capacity Ø 6 to 18 mm - Manual bending angle limitation - Maximum 180º bending result OPTIONAL ACCESSORIES: - KBV with hexagonal fixture for bending on model 3000 or 6000 Ledpfxjng Amko Akushg - Machine case - Length stop OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 1018, control type: PLC-controlled, degree of automation: manual, actuation type: electric, pipe diameter (max.): 50 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 195 °, bending radius (max.): 250 mm, warranty duration: 24 months, Equipment: CE marking, emergency stop, foot remote control, quick-change device, THE MANDREL BENDER WITH MANUEL CLAMPING: Lhsdpfonfvy Uox Akujg This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, actuation type: electric, pipe diameter (max.): 100 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 8 mm, bending angle (max.): 195 °, pressure (max.): 250 bar, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, quick-change device, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction Lhjdpfsnh R Susx Akusg - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY. The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm stationary and directly at the assembly site. A powerful three-phase motor and a precision gearbox provide a powerful drive. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set quickly and easily via a convenient, menu-driven user interface with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback. With the aid of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. Ljdpfx Akjng Ax Souohg The "stationary tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round bars can be bent without any problems.Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering- Hydraulic piping - Meander bending- prototyping- Sanitary and heating construction TECHNICAL DATA: Bending capacity 6000S: Ø 6 to 50 x 4 mm alternating current 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm three-phase current 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm three-phase 400 V - Bending radius min/max: 36 mm/280 mm - Optional large bending radii up to 500 mm - Multifunction machine control Bending angle adjustment (0.1°) - Maximum bending angle 240 - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop - Weight 110 kg OPTIONAL ACCESSORIES: - Profile bender PB20 - for bending flat and square iron up to max. 100 x 10 mm, round iron up to max. 20 mm - Roller bender RB43 - The RB43 is placed on the 6-edge shaft of the bending axis. By switching over to endless bending, the bending system acts as a drive unit. - Small bending device KBV - Special tool according to specification OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: new, functionality: fully functional, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute Lhsdpfexlzr Asx Akujg 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 Lhedpjwlgnrsfx Akueg 7. Documentation in the local language 8. Registration mark control 9. Programmable bag length 10. Vertical product flow 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)

Condition: used, 3-roller bender Brand RAGACHE Type New Tube CP70 3 drive rollers diameter 232 mm Rectangle capacity Standard steel 60.0 mm Round capacity Standard steel 40.0 mm Capacity L Standard steel 70.0 mm Capacity U Standard steel 120.0 mm Capacity T Standard steel 60.0 mm Lhsdpfx Asuluhwskueg Capacity I Standard steel 120.0 mm

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Lhodpfxoydbfhj Akueg Required space: 500 x 600 mm

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Lhedpfeudlymsx Akueg

Condition: used, Year of construction: 2020, operating hours: 6,493 h, machine/vehicle number: TB25A-008, overall weight: 650 kg, total length: 2,600 mm, total width: 1,000 mm, total height: 1,200 mm, power: 1.4 kW (1.90 HP), Tubobend 25 Machine Data Model: Tubobend 25 Operating hours: 6,493 h Weight: approx. 650 kg Dimensions: approx. 2600 × 1000 × 1200 mm Performance Data Connected load: 1.4 kW Bending Data Bending capacity (mild steel): Ø 25.0 × 3.0 mm Max. bending radius: 75 mm Lodpfjy H I R Rox Akuohg Max. bending acceleration: 58 °/s Bending accuracy: ± 0.2°

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. Ljdjf Epznopfx Akuohg You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: new, Year of construction: 2025, Manual pan & box brake SM 1270x2 mm is a machine for bending different elements from the metal sheets with maximum length 1270 mm and maximum metal thickness 2mm. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But manual pan & box brake SM 1270 thanks to special segmented bars can bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisted of parts with different lengths. So you can adjust it to the length you need to bend boxes and cassettes from all four sides. There are models of manual pan & box brakes we produce: Manual pan & box brake SM-1270 x 2mm Manual pan & box brake SM-1550 x 1.8mm Manual pan & box brake SM -2020 x 1.2mm Those manual box & pan brake in standard set have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle up to 135 degrees. The standard set of manual pan & box brake SM includes: - Manual box & pan folder - Angle measuring device - Four position angle limiter - Two segments with side cuts to bend cassettes with inside bends. As an additional option you can get: -Third segmented bar -Segments tempering option (in standard set pan & box brake’s segments go not tempered, but if you work with metal thickness more than 1mm we advise to temper one- so rigidity of segments will be higher and usage time of machine longer); - Change of upper segments height (from 30 to 45mm). So it lets to bend cassettes with height up to 45mm instead of 30mm. Lhodpfef Eywwjx Akujg - Cross cutting knife. Designed for cutting metal sheets before bending them with folding machine. The maximum metal thickness for cutting is 0.8mm; - Multifunctional acceptance table to adjust different length limiters in different parts of bending machine. So it lets to save your time while same sizes cassettes or elements production. Dimension: 160.00Sm x 82.00Sm x 120.00Sm Weight: 350.00Kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Ljdpfx Aohwrhbskuohg Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 60 h, power: 11.5 kW (15.64 HP), input voltage: 192 V, input current: 60 A, temperature: 1,350 °C, inner dimension length: 1,500 mm, inner dimension width: 100 mm, inner dimension height: 100 mm, total length: 2,000 mm, total width: 600 mm, total height: 600 mm, overall weight: 150 kg, number of chambers: 1, actuation type: electric, fuel type: electric, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Carbolite Gero Tube Furnace – 1350 °C, Ø 100 mm, Length 1500 mm – Fully Functional For sale is a high-quality tube furnace from Carbolite Gero in excellent technical condition. The furnace has only been operated for approx. 200 hours and was primarily used for sintering copper at around 1000 °C. Thanks to the maximum temperature rating of 1350 °C, the system was never thermally overstressed and therefore remains in well-maintained condition. 🔧 Technical Specifications - Max. temperature: 1350 °C Lhjdpfx Asy H E Ndokuog - Tube diameter: 100 mm - Tube length: 1500 mm - Temperature measurement: internal thermocouple → precise process control - Features: water-cooled flanges 🔩 Condition & Notes - Furnace is fully operational - Supplied ceramic tube shows signs of previous use Recommendation: - Replace with new ceramic tube for high-temperature applications - Alternatively, use cost-effective metal tubes for operations below 1100 °C 💡 Benefits - Highly accurate temperature control via internal measurement (i.e., furnace temperature and ramps are regulated by an internal thermocouple, ensuring optimal sample temperature) - Ideal for precise sintering processes, heat treatment, and materials development - Robust industrial design from a reputable manufacturer 📦 Areas of Application - Metallurgy (e.g. copper, steel, ceramics, glass-ceramics, powder metallurgy) - Research & Development - Laboratory and small-scale production applications 🚚 Other - Inspection possible by appointment - Collection only

Condition: new, Year of construction: 2025, pipe diameter (max.): 60 mm, bending radius (max.): 200 mm, PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS Steel pipe capacity 60 x 3 mm Easy one-touch control allows any operator to program and automatically save the bending angle Single bending speed Ljdpevn Euqsfx Akushg Start the bending cycle from the control panel or the built-in foot pedal Designed on a wheeled, handle-mounted cabinet for easy portability.

Condition: new, Year of construction: 2024, pipe diameter (max.): 76 mm, power: 3 kW (4.08 HP), warranty duration: 12 months, COUNTRY OF ORIGIN : TURKEY WARRANTY PERIOD :12 MONTHS Standard Hardware Self-memorizing NC Control display ensures professional and easy operation of the machine Pipe bending up to Ø 76mm x 3 mm The holder bracket supports the pipe when fixing it to the machine Blank holes for mounting special attachments Steel construction welded body Thermal - Power & Reset lamps Emergency stop button The machine has 500 internal program memory The minimum bending radius is 2 times the diameter (Ø) of the pipe (depending on the wall thickness of the pipe and the material) Ø 33.7 mm Standard 1 Set Pipe mold included User manual MODEL NBM 76 Minimum Diameter mm 80 Maximum Diameter mm 440 Operating Speed m/an> 7 Engine Power kW 4 Weight kg 260 Dimensions (L x W x H) 850 x 850 x 1050 Curling Capacity NBM 76 Lhodjvkubljpfx Akusg Thick Wall Tubes mm 76×3 Black Steel Pipe mm 70×5 Aluminum Pipe mm 76×6 Round solid tube (black steel) mm 45 Square tube (black steel) mm 50x50x5

Condition: new, Year of construction: 2025, pipe diameter (max.): 76 mm, bending radius (max.): 200 mm, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 12 MONTHS Steel pipe capacity 76 x 3 mm Maximum 200 mm Bend to CLR as small as 2 x Ø Touch screen programming of bending angle with multilingual system diagnostics Quick change tool system Digital display of bending angle Ljdpfx Ajvn Euwskuohg Material springback compensation Foot pedal control for hands-free operation

Condition: new, Year of construction: 2024, pipe diameter (max.): 60 mm, power: 2.2 kW (2.99 HP), warranty duration: 12 months, operating speed: 45,000 mm/s, COUNTRY OF ORIGIN : TURKEY WARRANTY PERIOD : 12 AY Standard Hardware Self-memorizing NC Control display ensures professional and easy operation of the machine Pipe bending up to Ø 60mm x 4 mm The holder bracket supports the pipe when fixing it to the machine Blank holes for mounting special attachments Steel construction welded body Thermal - Power & Reset lamps Emergency stop button The machine has 500 internal program memory The minimum bending radius is 3 times the diameter (Ø) of the pipe (depending on the wall thickness of the pipe and the material) Ø 33.7 mm Standard 1 Set Pipe mold included User manual MODEL NBM 60 Lhsdpovkua Uofx Akujg Minimum Diameter mm 80 Maximum Diameter mm 320 Operating Speed m/sec. 3 Engine Power kW 2 Weight kg 250 Dimensions (L x W x H) 750 x 850 x 1050 Curling Capacity NBM 60 Thick Wall Pipes mm 60×4 Black Steel Pipe mm 48×4 Aluminum Pipe mm 60×8 Round solid tube (black steel) mm 40 Square tube (black steel) mm 40x40x4

Condition: new, Year of construction: 2026, functionality: fully functional, Servo PANEL BENDER FBC 2516 CNC sheet metal bending machines offer high flexibility, efficiency, precision, and a high level of automation. They are suitable for processing enclosures, doors, and other components. These machines are widely used in sectors such as kitchen appliances, control cabinets, power electronics, elevators, and more. Technical specifications: - Automatic tool change - Bending length: 2500 mm - Maximum sheet width: 1500 mm - Maximum diagonal length: 2800 mm - Maximum bending height: 165 mm - Maximum material thickness: stainless steel 1.2 mm / aluminum 3 mm / mild steel 2 mm - Minimum sheet thickness: 0.35 mm - Possible bending angles: 0°-180° - Inside radius: 0.8–1.2 mm - Dimensions: 5.4 m x 4 m x 2.9 m - Weight: 19,500 kg - Control: Beckhoff Lhsdsyvzq Aopfx Akuog This machine will be exhibited at Euroblech 2026 in Hannover and will be available from October. We have been distributing YAWEI machines throughout Europe for over 20 years. Service and spare parts supply by H+S – everything from a single source.

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. 3. Rectangular Tube Welded Bed Lhjdpfxog D Ntqo Akuog Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.