Used Jäger Dba-200 for sale (15,904)

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. Ncjdpjyktrtjfx Akyer MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Ncsdjykub Ajpfx Akysr Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, power: 137 kW (186.27 HP), Conveyor belt continuous furnace, electrically heated, type DLE 600/200/3000 G for soldering or annealing under exogas atmosphere. Nsdpfx Aksy Ddtioyocr - Heating power: 137 kW - Conveyor belt width: 600 mm - Clear height above belt: 200 mm - Heated length: 3000 mm - Net throughput: 254 kg/h - Max. temperature: 1150 °C

Condition: used, twin shaft paddle mixer Ncjdpfx Asy Am Dnekyjr mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: used, mileage: 92,568 km, lifting height: 94,000 mm, Year of construction: 2018, General information Field of application: Construction Serial number: 093970 Drivetrain Drive: Wheel Weights Empty weight: 75.580 kg Functional Lifting capacity: 200.000 kg Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Tyre brand: Bridgestone Carrier engine: - Upper engine: Liebherr Upper hours: 7127 h Counterweight: 72000 Transport dimensions (LxWxH): 15.3x2.99x3.99 Additional information Nedoy A Dwlspfx Akyecr Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2007, centre distance 200 mm max. workpiece diameter 25 mm Travel path of front cross slide 70 mm Travel path of rear cross slide 60 mm Travel path main slide 100 mm spindle turning speed range 1.180/1.830/2.750 U/min Number of tool holders 5 pos. Cutting device shaft size 12 mm shaft 16 mm tailstock quill diameter 30 mm tailstock quill stroke 90 mm Quill mount MK 2 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery Ncodpfjy Dh U Rjx Akyor if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, functionality: fully functional, Traub automatic lathe Ncsdpfx Akjwcqv Ieyjr

Condition: used, machine/vehicle number: 6464445, Year of construction: 2016, operating hours: 4,085 h, lifting height: 2,100 mm, battery capacity: 375 Ah, battery voltage: 24 V, Empty weight: 1.479 kg Lifting capacity: 2.000 kg Maximum passing height: 159 cm Supply voltage: 24 V Dimensions of cargo space: 231 x 79 x 159 cm Nsdpfx Asqmc I Aekyjcr Tyre brand: Vorne: Vulkollan Hinten: Vulkollan tandem Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6516248, Year of construction: 2017, operating hours: 3,585 h, lifting height: 1,900 mm, fuel type: electric, mast type: duplex, battery manufacturer: Hawker, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,150 mm, Empty weight: 880 kg Lifting capacity: 2.000 kg Maximum passing height: 147,5 cm Supply voltage: 24 V Dimensions of cargo space: 196 x 77 x 148 cm Remanufactured: Yes Tyre brand: Vorne: Vulkollan tandem Hinten: Vulkollan Please contact Karl Leitner for more information Ncjdju Thtmopfx Akyer

Condition: used, machine/vehicle number: 6487624, Year of construction: 2017, operating hours: 2,450 h, fuel type: electric, battery manufacturer: Hawker, battery capacity: 260 Ah, battery voltage: 24 V, fork length: 1,150 mm, Empty weight: 571 kg Lifting capacity: 2.000 kg Supply voltage: 24 V Dimensions of cargo space: 174 x 73 cm Remanufactured: Yes Njdpfou Thrvjx Akyjcr Tyre brand: Vorne: Vulkollan tandem Hinten: Vulkollan Please contact Karl Leitner for more information

Condition: used, machine/vehicle number: 6626999, Year of construction: 2018, operating hours: 2,521 h, fuel type: electric, battery manufacturer: BT Classic, battery capacity: 225 Ah, battery voltage: 24 V, fork length: 1,150 mm, Empty weight: 751 kg Ncodpfxou Thrpo Akyer Lifting capacity: 2.000 kg Supply voltage: 24 V Dimensions of cargo space: 188 x 73 cm Reconditioned: Yes Remanufactured: Yes Tyre brand: Vorne: Vulkollan einfach Hinten: Vulkollan Please contact Karl Leitner for more information

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 51/110 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 Nsdpfx Akevzt Hbsyscr - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] - Machine weight : 4300 [kg] EQUIPMENT - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Parts conveying strip - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 2 - Number of fixed tool holders : 4 - Collet chuck : EROWA

Condition: used, TECHNICAL DETAILS Nedpeu Uu R Nefx Akyscr - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11/15 [kW] - Torque : 218/258 [Nm] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 66 [mm] - Max. turning diameter : 340 [mm] - Max. diameter on bench : 400 [mm] - Max. chuck diameter : 190 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 227.5 [mm] - Y stroke : +/- 41 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 3.7/5.5 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 21 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2000 X 1600 [mm] - Machine height : 1850 [mm] - Machine weight : 4800 [kg] MACHINE HOURS - Number of hours under power : 69240 [h] EQUIPMENT - CNC : Fanuc - Interface : Ethernet / RS232 / USB / PCMCIA - Coolant tank - Chips conveyor - Oil mist extractor : DONALDSON - Tool probe - Parts catcher - Fire extinguisher * : SIEMENS * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Number of turning tool holders : 1 - Number of fixed tool holders : 4 - Collet chuck : EROWA

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2019, total length: 14,010 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: grey, Year of construction: 2019, Axle configuration Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Ncsdpfx Aksy Awymjyer Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 90% Weights Unladen weight: 8,000 kg Payload: 34,700 kg Gross vehicle weight (GVW): 42,000 kg Maintenance APK (General Technical Inspection): valid until 10/2026 Identification Registration: OV-77-LV Further information Please contact Mark van der Steen or Bob Beukers for more information.

Year of construction: 2002, condition: used, z-travel 200 mm Clamping diameter of the cutter heads max. 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting cone for cutter heads Nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. Nsdpfsy A S U Ssx Akyecr The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 230 V, DGUV certified until: 05/2028, total width: 440 mm, total length: 540 mm, total height: 870 mm, input frequency: 5 Hz, overall weight: 90 kg, electrical fuse: 16 A, power: 1.1 kW (1.50 HP), Planetary Mixer TOP Model: SM 200 C Proven technology ... already successfully tested many times! Simple manual operation 3 gear speeds 1 stainless steel bowl, 20 liters 1 flat beater 1 dough hook 1 whisk Bowl safety guard / intrusion protection Tabletop machine with bowl lift Ncsdpfx Aou Sfglskyjr DGUV V3 tested - exclusively by us Connection: 220V Dimensions (W x D x H) in mm: 440 x 540 x 870 NEW machine & SAB tested 24 months warranty + spare parts service Option: Delivery service Additional bowls & whisks Maintenance contract Base stand Spare parts box Leasing & rental service We have a wide selection of planetary mixers in stock!

Condition: new, Year of construction: 2025, machine/vehicle number: CATDE200TN7400697, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.931 kg Functional Generator capacity: 200 kVA CE mark: yes Other information Fuel consumption: 34.2 Liter per Hour at 75% Load Generator: Caterpillar A2635L41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 325 l Transport dimensions (LxWxH): 3,345x1,172x1,746 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Ncsdpfx Aexq Uqcekyer - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2021, input frequency: 50 Hz, input current: 21 A, We offer this used HOMAG DRILLTEQ V-200 through-feed drilling machine, year of manufacture 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI 2.2 kW/1650 Pa two-bag extraction unit and various tools. Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse: 25 A Control voltage: 24 V If you have any questions or need further information, please send us a message or contact us by phone. Nedpfx Aksy Extmjyecr

Condition: new, Year of construction: 2025, machine/vehicle number: CAT00C71CECW08545, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 2.203 kg Nsdpfxowvdxpo Akyecr Functional Generator capacity: 200 kVA CE mark: yes Other information Fuel consumption: 40.2 Liter/Hour Prime Generator: Caterpillar R2455L4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 418 l Transport dimensions (LxWxH): 3,52x1,33x1,81 Production country: UK Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg Ncjdpfjy Au Nfsx Akyer

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table Nsdpfx Akoy Au Eyoyjcr -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Nsdpfx Asx Ilp Hokyscr

Condition: new, neu ca. 4 Monate ab Auftragse Italien 55200 € 1043.28 € 200 to 500 mm 1000x600 mm Nsdpfx Akoynnfieyjcr 640 mm 21 mm/s 2 mm/s 5.5 kW 1800 mm 1300 mm 2500 mm 6400 kg 2 speeds adjustable max. pressure manomete

Condition: used, Year of construction: 2021, operating hours: 13,000 h, KOMATSU WA200 – LIGHTLY USED, TOP CONDITION, NEW TYRES ----VEHICLE HISTORY ORIGINAL PAINTWORK FULL SERVICE CARRIED OUT BY SCHLÜTER (KOMATSU DEALER) USED ONLY FOR LIGHT WOOD SHAVINGS HANDLING TECHNICALLY AND VISUALLY IN VERY GOOD CONDITION ----VEHICLE EQUIPMENT KOMATSU WA200 YEAR OF MANUFACTURE: 2021 OPERATING HOURS: 12,926 HRS (APPROX. 5,000 HRS IDLE TIME) ENGINE PRIMARILY IN IDLE – OPERATING HOUR LOGS AVAILABLE ENGINE OPERATION PROVEN VIA OPERATING REPORTS ----EQUIPMENT FEATURES EROPS (ENCLOSED CABIN WITH ROPS PROTECTION) AIR CONDITIONING CENTRAL LUBRICATION SYSTEM GP BUCKET WITH STRAIGHT BOLT-ON CUTTING EDGE (APPROX. 60–70% CONDITION) NO QUICK COUPLER LOADER ARMS IN VERY GOOD CONDITION FOR BUCKET USE ----TYRES TYRES: 17.5–R25, 4X NEW ----EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 – €2,000) EXPORT DOCUMENTATION/CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5, 15, 30-DAY REGISTRATION PLATES, AND 15-DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA E-MAIL VERBAL RESERVATIONS ARE NOT VALID For EU and non-EU sales, a minimum deposit between €500 and €1,000 is required. Changes, errors, and prior sale reserved! More vehicles available on our website. Sales subject exclusively to our General Terms and Conditions – see homepage. Important note: Despite careful checking of all details in our offers, errors may occur, some due to transmission issues between platform providers. Therefore, all information is provided without guarantee and does not constitute a legal claim. Ncodpfexyb E Eex Akysr Legal: This sales listing does not constitute an offer within the meaning of §145 BGB (German Civil Code). Instead, it is intended as information for contract initiation. All specifications provided are without guarantee and do not constitute warranted characteristics.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm Ncsdjydi A Ispfx Akyer -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg