Used Juice Filtration for sale (1,124)

Year of construction: 2023, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Rodpfxsk S Rpus Ad Ast

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Rodpfx Adetqf Rzo Ast Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: Rjdjy Ecu Uopfx Ad Ajt High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: RMZY Series (20 Bar Version) Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser – RMZY Series (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: RMZY Series (16 Bar Version) Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Rjdpfx Adjy Ecuzs Aot Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), Year of construction: 1987, E.BACHILLER stainless steel nutsche filter dryer, 0.4 m². Year: 1987. Rodpfey Hfx Eox Ad Aot Hydraulic power unit with 7.5 hp motor, 1410 rpm, 50 Hz, 220 V. No documentation available.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, total width: 2,920 mm, total length: 5,720 mm, total height: 3,360 mm, maximum load weight: 50 kg, heating capacity: 59 kW (80.22 HP), warranty duration: 6 months, input frequency: 50 Hz, year of last overhaul: 2026, 4-chamber ultrasonic cleaning system with automatic goods transport Maximum loading weight: 50 kg including basket Usable basket dimensions (internal): 426 x 375 x 470h mm Loading station with transport trolley 1. Ultrasonic cleaning with bottom and side sonication (25/45 kHz - switchable) 2. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable) 3. Ultrasonic rinsing with bottom sonication (25/45 kHz - switchable), including lift-out function 4. Hot air dryer Unloading station - Tank 1 (ultrasonic cleaning) is also equipped with an overflow and a large separate oil separator. - Automatic cover on Tank 1 Rjdpoy H Uzvjfx Ad Ast - Media filtration in all tanks (via cartridge filter) - Complete system enclosed and with exhaust extraction - Control system: Siemens S7-1500 incl. 12" HMI touch panel - Documentation available in German Electrical connected load: 59 kW The system can also be dismantled and re-installed at a new location by our specialist technicians for an additional charge, if required. Water treatment for Tank 4 (final rinse) can be supplied at extra cost. Test cleaning possible at any time, the system is powered up.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,000 W, total height: 1,915 mm, total width: 1,985 mm, overall weight: 6,550 kg, controller manufacturer: SIEMENS, product length (max.): 3,857 mm, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Siemens S828D Control touchscreen with ShopTurn 15 inch display • 6-axis configuration with driven tools, Y-axis and sub-spindle • Main and sub-spindle as built-in motor spindles • Cylindrical roller bearing, accuracy class P4, lifetime lubrication • Main spindle chuck diameter 255 mm • Sub-spindle chuck diameter 175 mm • Hollow clamping device, hydraulically actuated • Hollow clamping cylinder • 24-station tool turret (BMT65P interface) • Automatic tool measuring arm, electrically swiveling • Dynamic spindle speed control • Counter spindle with tailstock function • Coolant flow max 448 L per minute • Oil flow 336 L per minute • Electronic safety clutch for X and Z axes • Working area swing over bed 780 mm • Swing over cross slide 630 mm • Max turning diameter 255 mm • Max turning length 760 mm • Bar capacity 76 mm • Max workpiece weight including chuck 250 kg • Main spindle bore 91 mm • Max torque approx 706 Nm • Sub-spindle bore 52 mm Rodpfx Aoy E Izaod Aot • Spindle speed up to 6000 rpm • Motor power approx 18.5 kW • Torque approx 118 Nm • C-axis main spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 1508 Nm • C-axis sub-spindle: 360° resolution 0.001°, speed 200 rpm, torque approx 121 Nm • Turret: 12 driven tool stations out of 24 • Max driven tool speed 5000 rpm • Driven tool power approx 7.5 kW • Driven tool torque approx 50 Nm • Rapid traverse X and Z approx 30 m/min; Y approx 10 m/min • Bed angle 30° • Coolant tank capacity approx 220 liters • Coolant pump pressure 7 bar • Hydraulic tank approx 20 liters • Central lubrication automatic system • Electrical connection AC 380 V, 3-phase, 50/60 Hz • Total power approx 69.27 kVA • Machine was never used (like new) Additional equipment • LNS hinged belt chip conveyor, right side, without filtration • Dormatec AF-30P oil mist extraction system • Boring bar holders, diameter 50 mm to 25 mm • Double boring bar holder, diameter 32 mm • Reducing sleeves set: 40/10, 40/12, 40/16, 40/20, 40/25, 40/32 • U-drill reducing sleeves: 40/20, 40/25, 40/32 • Two Eppinger driven tool holders BMT65P, straight, with external cooling Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine Rodpfxsyvfhdo Ad Ast - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, total height: 2,380 mm, overall weight: 3,725 kg, product length (max.): 2,145 mm, This 4-axis Mitsubishi EA 12S die-sinking EDM machine was manufactured in 2016 in Japan. It features X/Y/Z travels of 400/300/300 mm, a maximum workpiece weight of 700 kg, and a stainless steel table measuring 700 × 500 mm. Equipped with a C-axis and Erowa chuck, it also includes a dielectric filtration system with a 400 L tank. Consider the opportunity to buy this Mitsubishi EA 12S die-sinking EDM machine. Contact us for more information about this machine. Rsdpfx Aex Uq Syjd Aet • Maximum Workpiece Dimensions: 850 x 640 x 250 mm • Maximum Workpiece Weight: 700 kg • Maximum Electrode Weight: 50 kg • Table Dimensions (LxW): 700 x 500 mm • Table Surface: Stainless steel • C-axis with Erowa Chuck: 152.5 – 452.5 mm • Maximum Dielectric Filling Level Stroke: 300 ml • Filtration System: Yes • Tank Capacity: 400 L • Filter Particle Fineness: 3 / 2 µm • Dielectric Temperature Control: Yes • Pulse Generator Power Supply with Transistor Control • Cooling Method: Fully Sealed, Indirect Air Cooling Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: RS 110-6-2 TF, functionality: fully functional, filter area: 660 m², total height: 10,400 mm, total length: 9,200 mm, total width: 2,500 mm, overall weight: 9,000 kg, Equipment: documentation/manual, Industrial Extraction System Venti Oelde, Spülluftfilter RS 110-6-2 TF, High-Performance System Airflow approx. 87,500 m³/h, 660 m² filtration area, year of manufacture 1997, incl. 3 high-performance fans, incl. ductwork, incl. air recirculation for approx. 70,000 m³/h, excl. spark extinguishing system. For sale is a powerful industrial extraction system by Venti Oelde, designed for an airflow of approx. 87,500 m³/h. The system has been in continuous operation and is suitable for use in larger industrial applications (e.g., wood processing, furniture manufacturing, operations with high chip and dust volumes). 👉 This is a complete central extraction system, not a standalone unit! Key Technical Data (excerpt) - Airflow: approx. 87,500 m³/h - Configuration: Central extraction - Year of manufacture: approx. 1997 - Application area: Industry / continuous duty - Robust steel construction - Built for heavy-duty continuous operation Scope of Delivery - Filtration system - Fans - Ductwork - Air recirculation unit - Steel frame / support structure Rodpfjywflasx Ad Aet Condition - System was operational until recently - Used, age-related, but solid industrial build quality - Inspection is explicitly encouraged Special Features - Very high air capacity – ideal for large-scale production facilities - Immediately available – no long lead times as with new systems - Heavy-duty construction – durable industrial technology - Attractive alternative to costly new installations - Dismantling support can be organized at extra cost!!!! The offered machine is sold as a used system. Sale is conducted with exclusion of any liability for material defects. The machine is sold as inspected and excluding any warranties. The seller accepts no guarantee regarding the functionality, performance, or suitability for any particular purpose. Disclaimer All liability for material defects is excluded. This does not apply to damages arising from injury to life, body, or health, or in cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the system is to be undertaken by the buyer at their own risk and expense. The buyer is responsible for all costs and risks associated with dismantling, loading, and transport. Transfer of Risk The risk passes to the buyer at the latest upon commencement of dismantling and/or loading. Other Information No liability is accepted for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Rjdpsnyhvqsfx Ad Ajt Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry Rjdpfxswugczs Ad Ajt 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 205 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, number of axes: 4, This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details. • Main features: • Main spindle + sub-spindle • Y-axis for multi-tasking operations • 12-station turret (24 indexing positions) • Live tooling (driven tools) • Tool interface: BMT45 • Workholding/Capacity (on machine): • Hydraulic 3-jaw chuck: 170 mm • Key advantages: • Y-axis + sub-spindle → full machining capability • Live tooling → turning and milling in one setup • Bar feeder → ideal for serial production • Automated part handling → increased productivity Additional equipment • Bar feeder: Top Automazioni Fusion 350 (Ø20–50 mm, up to 3200 mm length) • Additional 3-jaw chuck: 135 mm • Collet system, capacity 5–65 mm • Chip conveyor (belt type, side discharge) • Parts catcher for sub-spindle • Oil skimmer • High-pressure coolant system (5–7 bar, 20 µm filtration) • Automatic tool measurement • Spindle and axis load monitoring system • 3-color signal light Rodey Epi Aspfx Ad Aet • Parts handling arm (for sub-spindle unloading) • Tooling package: • 2x straight driven tool holders • 2x angular driven tool holders • 1x extended angular holder • 1x set of turning tool holders Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 800 mm Travel distance Y :800 mm Travel distance Z: 550 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain TNC 640 Rodpfx Adeym Rrvs Aot spindle chuck: HSK-A63 spindle revolutions: 20000 rpm Speed range to: 20000 U/min table size X: 450 mm table size Y: 450 mm max. workpiece weight: 300 kg tool changer: 170 - time input Power : 25 kW Torque: 120 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center Heidenhain TNC 640 control 170-position tool changer HSK-A63 spindle interface KNOLL chip conveyor KNOLL oil filtration system KF 400 / FKA 620 HABOR cooling unit suitable for steel machining high precision for tool and mold making automated workpiece handling for series production

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Redpfou A Thlex Ad Ajt Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m

Condition: new, Year of construction: 2024, Classical extraction system with powerful motor, big metal waste bins and multiple filters for big filtration area which are closed inside the bin for protection. Rsdpfx Asf D S T Iod Ajt It also includes a big-particle separator to prevent damage to the whole system. TECHNICAL SPECS: - Motor power: 7.5 kW + electronic control (inverter) - Air flow: 6500 m3/h - Air speed: 32m/s - filter area: 21 m2 - waste bins volume: 450 liters - weight: 450 kg - inlet diameter: 300 mm - Dimensions: 2400 mm X 1160 mm X 2310 mm

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, wire diameter (max.): 0.3 mm, overall weight: 5,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details. Rsdpfsy Egnxox Ad Ast • Control: Mitsubishi CNC control • Machining type: wire erosion cutting (Wire EDM) • Dielectric system: water-based dielectric system • Cooling/filtration: integrated dielectric filtration system • Automatic wire threading: included • Wire type: brass wire (e.g. OBN 0.25 mm) • Wire diameter capability: approx. 0.1–0.3 mm • Wire diameter (standard range): 0.15–0.30 mm (standard 0.30 mm) • Application: precision cutting of conductive materials • Typical materials: hardened steel, tool steel, carbide, aluminum • Axis travels: U ±100 mm, V ±100 mm • Maximum workpiece dimensions: X 1250 mm, Y 1020 mm, Z 505 mm • Maximum workpiece weight: 3000 kg • Tank weight (empty): 450 kg • Generator weight: 240 kg • Required door opening (W x H): 2587 x 2815 mm • Power supply: 3 phase 400 V AC ±10% 50/60 Hz • Minimum fuse protection: 32 A slow • Pneumatic pressure: 5–7 kgf/cm² (500–700 kPa) • Air consumption: minimum 42 l/min (more than 75 l/min for AT system with 0.1 mm wire) • Air connection: 3/8" • Machine footprint length: approx. 3299 mm • Minimum clearance around machine: 1 m • Recommended working platform height: minimum 500 mm • Handling requirement: forklift minimum 10 t capacity, fork length minimum 3.5 m Additional equipment • Power supply transformer: 20 kVA • Dimensions: 1.2 x 0.4 x 1.2 m • Weight: 300 kg • Ionizer unit: E.KO ionizer system (included)

Condition: excellent (used), Year of construction: 2019, operating hours: 9,058 h, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, filter area: 106 m², suction capacity: 7,000 m³/h, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum system suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 6 Year of manufacture: 2019 Rodsydcygjpfx Ad Ast The unit has 9,000 operating hours. Filtration area: 106 m² Fan power: 7.5 kW Capacity: 7,000 m³/h Inlet diameter: 315 mm Dimensions: Height: 3.38 m Width: 2.10 m x 1.15 m Stock number: 1105

Condition: used, Year of construction: 2021, Wire erosion / EDM Travel distance X: 800 mm Travel distance Y :600 mm Travel distance Z: 500 mm max. workpiece size X: 1050 mm max. workpiece size Y: 800 mm max. workpiece size Z: 295 mm max. workpiece weight: 1500 kg table size X: 1150 mm table size Y: 850 mm with AWF ( Automatic Wire Feeding ) U / V axis: ja Total operating hours: 4316 SPW-E Generator 8-axis simultaneous control WS5P rotary table (indexing or simultaneous movement) Taper Flex 45 NEO (for taper cutting up to 45°) Linear motors (X, Y, U, V axes) Absolute linear scales (X, Y, U, V axes) Sodick Motion Controller Ceramic work zone Remote controller 3-sided rising and lowering work tank Four-stage filtration system Improved operator usability Advanced wire tension control SODICK Fine Corner Control Energy-saving system Digital PIKA W Plus for highest surface finish DSF (Dynamic Shape First) Fixed Jet AWT (Automatic Wire Threading) Automatic water level control Wire end remover Dielectric cooling unit Rjdey D N Ekepfx Ad Aet Voltage stabilize r LAN interface 19" TFT color display Intelligent Q3vic EDW Anti-virus software USB interface Work light Integrated 20 kg wire feeder L-Cut (wire chopper) 8-axis simultaneous control

Condition: good (used), Year of construction: 2014, operating hours: 8,035 h, functionality: fully functional, machine/vehicle number: MH0017-000100, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: fanuc, controller model: 31i, operating hours of spindle: 6,000 h, New Doosan horizontal machining center type NHP 8000 with Fanuc control unit type 31i Included equipment and options: Pallet centering system 800*800 Coolant supply with hand gun High-pressure coolant 70 bar, 7.5 kW with cyclonic filtration Rsdpfewu Rgqox Ad Ajt Automatic tool changer Tool load management Chip conveyor Renishaw RMP60 workpiece probe TS27R tool probe

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, volume flow: 90 m³/h, total width: 2,950 mm, total length: 3,800 mm, total height: 2,300 mm, energy consumption: 1 kWh, Innovative Band Filter Technology for Maximum Process Reliability The RESY KBF Compact Band Filter System represents a groundbreaking advancement in the field of automatic band filter units. A key advantage: There is no relative movement between the conveyor belt, filter fleece, disc wheels, and sludge scrapers. As a result, the filter fleece remains undamaged even with large amounts of chips or dirt particles. Compared to conventional flatbed filters, the compact band filter offers: down to 80% less space required higher level of purity consistent filtration performance reduced maintenance intervals maximum process stability Operating Principle of the Compact Band Filter A robust, endless metal hinge belt is guided in a semi-shell shape over two rotating disc wheels and driven by a geared motor. The filter fleece is positioned between the belt and the wheels. The contaminated medium is introduced via a central inlet pipe directly into the fully sealed filtration tank. In the calm zone, solid particles settle and form a filter cake. This filter cake acts as an additional natural filtering layer, continuously improving separation performance. As contamination increases, the liquid level rises — depending on design, up to 500 mm. When a preset maximum value is reached, the system automatically feeds in fresh filter fleece without interrupting the filtration process. Simultaneously, the following are reliably discharged: used fleece sludge chips gross particles An integrated sensor continuously monitors the diameter of the fleece roll and signals in good time when the roll needs to be replaced. The entire filtration process operates fully automatically and energy-efficiently. Rodpfx Adsy Evxyo Aot Custom Configuration for Your Application The actual filtration performance depends on various process parameters, including: flow rate medium (e.g., emulsion, oil, process water) inlet concentration desired filtration fineness particle size and material characteristics The compact band filter is configured individually based on your technical requirements. Typical Application Areas metalworking grinding processes turning and milling operations coolant preparation process water purification chip and sludge filtration

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 570 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 350 mm, total height: 2,000 mm, total width: 725 mm, wire diameter (max.): 0.33 mm, overall weight: 4,600 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Sodick AQ537L wire EDM machine was manufactured in 2005. It features an X-axis travel of 570 mm, Y-axis travel of 370 mm, and Z-axis travel of 350 mm, along with a work table size of 806 x 496 mm. With a maximum workpiece weight of 1000 kg, this machine is designed for precision cutting. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ537L machine we have for sale. Contact us for further details. • U: 120 mm • V: 120 mmTable / tank • Work table (W x D): 806 x 496 mm • Work tank (W x D): 1050 x 720 mm • Distance from floor to table top: 995 mmWorkpiece capacity • Max workpiece height: 340 mm (standard), 280 mm (submerged) • Max workpiece weight: 1000 kgWire system • Taper angle: ±25° / 100 mm • Wire tension: 3–23 N • Max wire feed speed: 420 mm/s • Max wire spool weight: 8 kgMachine dimensions / weight • Installation space (W x D): 3700 x 3900 mmDielectric tank Rjdpfx Asy D R Tcsd Ast • External dimensions (W x D x H): 725 x 2550 x 2000 mm • Empty weight: 600 kg • Capacity: 800 L • Deionizer: Ion-exchange resin (18-liter type) • Filtration system: 3 replaceable paper filters (internal-pressure type)

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, total height: 1,843 mm, total width: 1,970 mm, wire diameter (max.): 0.3 mm, overall weight: 4,200 kg, number of axes: 5, wire diameter (min.): 0.15 mm, This 5-axis Sodick AQ535L wire EDM machine was manufactured in 2007. It features an X-axis travel of 550 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The work table size is 790 x 500 mm, with a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AQ535L machine we have for sale. Contact us for further details. • Axis travels: • U: 80 mm • V: 80 mm • Table / Tank: • Work table size (W x D): 790 x 500 mm • Work tank dimensions (W x D): 1100 x 720 mm • Distance from floor to table top: 1005 mm • Workpiece capacity: • Maximum workpiece height: 290 mm (standard) / 270 mm (submerged) Rsdpfxey D Rvde Ad Aot • Maximum workpiece weight: 800 kg (standard) / 680 kg (submerged) • Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L • Deionizer: 10 L • Filtration system: 2 replaceable paper filters

Condition: good (used), Year of construction: 2011, travel distance X-axis: 1,200 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,200 mm, Travel path B: 0-360° Travel path A: +45° to -90° Spindle interface: HSK 100 Rotary spindle diameter: 200 mm Spindle speed: 15,000 rpm Chain magazine: 60 positions Rodpfxjy Eni Dj Ad Ajt Pallet changer Chip conveyor High-pressure coolant through spindle Coolant filtration system

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, The used Kerres KBW 200 meat washer from 2012 is an efficient device designed for washing bins in food processing plants. The stainless steel construction, high-quality workmanship and proven German technology make the KBW 200 model ideal for everyday industrial use. The device ensures effective cleaning thanks to powerful pressure nozzles, a filtration system and adjustable operating parameters. It is the ideal solution for companies that value hygiene, reliability and media savings. Technical specifications: Manufacturer: Kerres Model: KBW 200 Year of manufacture: 2012 Capacity: 30 trays/h Rjdpfxewfftge Ad Ast Material: stainless steel Power supply: 400V, 3Ph Power: 13kW Compact design – ideal for smaller spaces: L: 3,6m, W: 1,7m, H: 2,6m Used Kerres KBW 200 corrugated sheet washer – efficient and compact device for washing containers in the food industry. Proven German quality.