Used Krones Blitzpac Crater (2003) for sale (1,283)

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Axle 1: left 8 mm right 8 mm Nedpozvbqajfx Aa Rsda Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 6 mm right 6 mm Njdszvbbfopfx Aa Rjda

Condition: used, Year of construction: 2003, Overview This high-pressure air compressor was manufactured in 2003 by the Belgian company Ateliers François (AF). The CE68 ASG model is designed to supply compressed air at 40 bar, specifically for PET bottle blowing applications. The compressor is still installed and electrically connected in Germany and is available immediately. Technical data Nodpfxozvc Nwj Aa Reda - Free air delivery: 2,100 m³/h (35 m³/min) - Operating pressure: 40 bar - Design pressure (PS): 42 bar - Speed: 480 rpm - Shaft absorbed power: 355 kW - Voltage: 400 V - Year of manufacture: 2003 - Application: PET bottle blowing Scope of delivery - 1 × High-pressure compressor 40 bar CE68 ASG - 1 × Refrigeration dryer - 1 × Electrical control cabinet Condition - Still installed and electrically connected - Available for inspection on site Availability Immediately available.

Condition: used, Year of construction: 2003, Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Technical data Rotor speed: 284 rpm Rotor diameter: 370 mm Ndjdozuz S Ispfx Aa Roa Infeed width: 800 mm Infeed height: 500 mm Drive power: at least 22 kW Weight: 1900 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit Nodezuykvopfx Aa Roda 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2003, - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Main spindle 12 kW - Tool changer, 18-position CNC machining center Manufacturer: Homag Type: PROFI BAZ20/30/16/V/D Year of manufacture: 2003 Technical data Homatic - CNC control CNC programming system WOODWOP Postprocessor Workpiece dimensions - Workpiece length: 800 - 3000 mm - Workpiece width: 350 - 1400 mm - Workpiece thickness: max. 70 mm with edge / max. 80 mm for milling - Edge band width: min. 120 mm - Weight: max. 150 kg Throughfeed table - Longitudinal console 1, fixed installation - Longitudinal console 2, manually adjustable via width adjustment in the Y-direction - 8 vacuum clamps 125 x 50 x 100 mm - Working height, bottom edge of workpiece: 950 mm Motor, width adjustment, longitudinal console, traversing table - For different workpiece widths via servo drive for throughfeed table - Per longitudinal console Chip conveyor - Chip and waste disposal via integrated chip conveyor under the longitudinal traverse Stop pins for top layer overhang - Stop pins with lifting-rotating mechanism for workpieces with max. 20 mm top layer overhang - Individually selectable, end position monitored, stroke 110 mm - For manual placement of doors Vacuum pump 100/140 m3/h Unit for positioning the vacuum clamps - Mounted on the unit carrier with pneumatic extension console - For max. 4 vacuum clamps per longitudinal console Main spindle 12 kW - Tool holder HSK F63 - Extraction system for all tools and units - Three-phase asynchronous motor 12 kW at S1, water-cooled - Tool weight: max 6 kg incl. holder - Tool length: max. 200 mm from the motor spindle bottom edge - Tool diameter: max. 180 mm for milling tools / max 200 mm for sanding tools - Frequency converter: 15 kW - Speed range: 1500 - 18000 rpm, stepless, programmable - Full rated power from 12000 rpm Unit interface for the main spindle - For connecting the machining units - Pneumatic and swivel drive interface - C-axis with torque transmission and 3-point support Tool changer, 18-position For tools and units with HSK F63 Tool weight: 6 kg Tool length: max. 200 mm from the motor spindle bottom edge The following tool and unit configurations are possible - 18 x max. 130 mm - 9 x max. 180 mm and 9 x max. 70 mm - Tool diameter max. 200 mm for sanding tools - Tool changer can be raised for a moving pick-up station on the left side Drilling/milling unit, 4 spindles, for tool changer Ndedpfjzux Tpjx Aa Rea - For automatic changing in the main spindle - Collet holder ER25 up to max. 16 mm shank diameter - Tool protrusion max. 50 mm - Speed: max. 13500 rpm - Standard collet 10 mm - Infinitely swiveling via the C-axis - Without tool Lock case milling unit, 2 spindles, D=16/20 - With integrated blow-out nozzle - Two-sided spindle outlet with counter-rotating direction - Speed: 12000 rpm - Infinitely swiveling via the C-axis - Without tool 1x Weldon chuck: 20 mm - Reducing sleeve for tool 16 mm - Total tool length: 180 mm - Tool protrusion: max. 135 mm 1x ER16 collet with 10 mm - Total tool length: max. 70 mm - Tool protrusion: max. 40 mm Sawing/drilling unit, swiveling, for tool changer - For miter cuts and angled drilling - Manually swiveling 0 - 90 degrees - Mounting flange 30 mm with countersunk head screws - Tool diameter 52 mm - Prepared for miter saw: max. 180 mm - Drill chuck with Weldon chuck: D=10 mm - Speed: max. 9000 rpm - Infinitely swiveling via the C-axis -

Condition: ready for operation (used), Round pile feeder DCT digital control 6 plates 2 knives Side pocket Presser strean delivery Njdpfx Aajtcx Ius Rjda

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data - Capacity: 14.000 bph - Filling product: carbonated water and soft drinks - Packaging formats: shrink wrapping without tray - Pallet: Euro pallet (1.200 x 800 mm)  - condition: good technical condition, still in production Scope of Delivery Ndodpfx Aaeyb Tuie Roa Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009

Condition: used, mileage: 19,700 km, power: 75 kW (101.97 HP), first registration: 11/2003, fuel type: diesel, next inspection (TÜV): 01/2027, color: beige, gearing type: mechanical, emission class: euro3, number of seats: 5, Equipment: ABS, all wheel drive, central locking, immobilizer system, parking heater, First owner. Only 19,700 total kilometers driven since new. Comes with service booklet. Last service in 2025 at 17,983 kilometers. Engine, transmission, and rear axle oil changed. Timing belt replaced. Tires also replaced at the same time; fitted with Semperit winter tires, DOT 2023/2024. Manufactured in February 2003 and first registered in November 2003. One of the last T4 Syncro models built. Long wheelbase. Originally, it was technically intended for factory installation to be registered as a standard passenger vehicle with 9 seats. However, this registration was immediately removed from the original vehicle registration document because the vehicle was always used as an operational vehicle. The actual registration type has always been "Other motor vehicle, water rescue operational vehicle." Currently, 5 seats are registered and actually present; all are robust and easy-to-clean synthetic leather seats. SORTIMO shelving is installed in the rear, which has been used for emergency equipment and clothing. Ndjdpfx Ajyyfr Ssa Rsa Unladen weight according to documents: 2270 kg. Permissible total weight: 2890 kg. Overall dimensions of this VW T4: Length 5107 mm / Width 1840 mm / Height with special signals 2100 mm (without the flashing lights, it is 1920 mm). Sliding door on the right and rear wing doors. Dent on the lower left rear. All doors function smoothly and without noise. WEBASTO AirTop 3500D auxiliary heater. Ball hitch with 2000 kg towing capacity (braked) or 750 kg (unbraked). Maximum towing weight = 4500 kg. 2.5-liter TDI five-cylinder diesel engine. 2461 ccm. 102 hp. AXL. Starts immediately and runs perfectly. 5-speed manual transmission. Differential lock. ABS. Power steering. Airbags for driver and passenger. Central locking with remote control. 2 original VW keys with remote control are included. Electric windows and electrically adjustable exterior mirrors. 155 km/h is listed as the maximum speed. The T4 was recently driven to us without any problems over 600 kilometers on the highway. It runs excellently and is in good original condition. The TÜV (technical inspection) is valid until 01/2027. This offer is only valid for commercial businesses and freelancers of all kinds, as well as for authorities / emergency services. Unfortunately, sales to private end consumers are not possible. Subject to prior sale and errors. Price according to §25a UStG (differential taxation; VAT cannot be shown separately and is not added). The Syncro is available immediately.

Condition: used, Year of construction: 2011, load capacity: 800 kg, Cardboard clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: ISO 2A / 3A Year 2011 Capacity 800 kg Sideshift Opening range 410-2290 mm Clamp length 700 mm Clamp height 1200 mm Width 1750 mm ID OS1314 Nsdpfx Ajt Tbx Eea Roda

Condition: ready for operation (used), Year of construction: 2002, Output: 400 cycles/h, conveyor belt: single-lane, bottle table: T-version, gripper head: 1-dimensionally adjustable, packaging unit: max. 9 heads. Bottle crate dimensions: 1l plastic crate: 400mm/300mm, 0.5 plastic crate: 300mm/200mm, max. conveying capacity: 1850mm, transport heights: Bottle table height: 1200mm, container height conveyor: 750mm, control: Siemens S7. Dimensions X/Y/Z: approx. 4200mm/1900mm/1900mm, weight: approx. 4300kg. Including gripper for 1l VDF and 0.5l NRW. Documentation available. On-site inspection is possible. Ndodpfxotul Nrj Aa Rsa

Year of construction: 2003, condition: used, Colour: Cream Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 140 x 290 cm - Year: 2003 - Documentation available: No Nsdpfxoztbwhs Aa Roda - CE marking present: Yes - CE certificate present: No - Suitable for material: Metal dust - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Connection diameter [mm]: 400 - Number of connections [pcs]: 1 - Options: Collection container, Control cabinet - Transport dimensions: 1300mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2003, condition: used, Colour: Beige Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 310 x 290 cm - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Suitable for material: Metal dust - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Options: Welding fume extraction, Control cabinet - Transport dimensions: 1300mm x 3100mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ndodpfozta Acjx Aa Rja Lukas van Rossum

Condition: good (used), Year of construction: 2003, Engel VCe 740/150 HL (2003) Nodjzu R Niopfx Aa Roda

Condition: good (used), Year of construction: 2003, operating hours: 10,405 h, load capacity: 4,000 kg, lifting height: 3,200 mm, fuel type: diesel, mast type: duplex, construction height: 2,400 mm, Linde H40T-02 Duplo 320 Sideshift Perkins Diesel, 2003 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always present. Van de Wert Trading B.V. Ndedpszr Eplofx Aa Rsa Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Colour: Grey Empty weight: 1.400 kg Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Ndjdozry N Hepfx Aa Rea

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Ndedozrk Slepfx Aa Roa Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm

Condition: used, Year of construction: 2003, Steering wheels 700mm Guide Crank wheels in cast iron Ndodpfx Aaozr R Dus Roa Provided with multiple blades 380V

Condition: used, Year of construction: 2003, total length: 3,000 mm, total height: 1,700 mm, total width: 1,000 mm, Colour: White Empty weight: 1.000 kg Price: On request - Year: 2003 - Documentation available: Yes Nodpfx Aaexwuwvj Rsda - CE marking present: Yes - CE certificate present: No - Serial number: 30058 B - Max. working width [mm]: 1320 - Min. throughput height [mm]: 3 - Max. throughput height [mm]: 100 - Number of rolls [pcs]: 2 - Transport dimensions: 3000mm x 1000mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Overview This TIRELLI KS12/660 is a rotary rinsing machine for glass bottles, manufactured in 2003 by TIRELLI (Porto Mantovano, Italy). It previously operated within a complete 2,500 bph glass bottling line for kombucha production and handles formats from 250 ml to 750 ml with a 26 mm neck finish. The machine can rinse with air, water, inert gas or another rinsing medium. The machine is enclosed in stainless steel framing with transparent safety guard doors and features a rotary gripper carousel, infeed and outfeed conveyor sections and a control cabinet with push-button panel. Technical data - Manufacturer: TIRELLI (Porto Mantovano, Italy) Nedpezrnrpofx Aa Reda - Model: KS12/660 - Year of manufacture: 2003 - Machine type: rotary bottle rinser, glass - Rinsing media: air, water, inert gas or other rinsing product - Formats: 250 ml / 330 ml / 750 ml - Neck finish: 26 mm - Capacity: up to 2,500 bph Condition Used - in production until June 2026; already dismantled and stored. Availability Immediately available. Location: France. Handling, packing and truck loading can be quoted on request (EXW).

Year of construction: 2003, condition: good (used), ROTOFLEX VLI 510 – Slitter Rewinder General information: • Brand: Rotoflex • Model: VLI 510 • Year of Manufacture: 2003 • Condition: Good working condition • Availability: Immediately Ndodpfx Ajwmf Adja Rea Technical Specifications: • Web Width: 510mm • Functions: o Slitting o Rewinding • Rewind Diameter: Up to 700mm • Unwind Diameter: Up to 750mm • Core Sizes: 3" • Slitting System: Razor blade • Minimum Slit Width: 12mm • Web Path: Roll to roll • Counting Options: Label and length counting • Drive System: Servo driven • Web Guiding System: Included Application: Ideal for slitting and rewinding of self-adhesive labels, films, foils, and other flexible materials. • Condition: Regularly serviced and well maintained _____ Technical and Optical Condition: • Technical: 8/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____ Price & Terms:

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Nedpfxszqvcyj Aa Roda Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000     

Condition: used, Year of construction: 2003, Maximum pushing speed 120 mt/min Blade diameter 500/550 mm Nsdpfszqg R Iox Aa Rjda Worktop height 900+-20 mm Compressed air consumption 1200 nl/min 6 atm Minimum installed power 10 kW Suction air velocity 2000 m3/h 45 mt/sec Output with 8 ejectors

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ Ndedpfx Ajyfm Ahja Rea 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: good (used), Year of construction: 2003, Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000 Distance between tie‑bars (tie bar spacing): 460 × 460 mm Mold platens size (fixed / moving platen): 757 × 757 mm Opening stroke (mold opening stroke): 450 mm Ndedswkg Txopfx Aa Rea Min. mould height: 250 mm Max. mould height: ≈ 550 mm Max. daylight (max open platen distance): sometimes specified high (depending on configuration) Injection / Plasticizing Unit: Screw (barrel) diameter: 40 mm in common version. Shot volume (max): ≈ 201 cm³ Shot (weight) for PS: often around ~193 g (depending on material) Injection pressure: varies by configuration (some data sources mention around 1750 bar or more) Machine Dimensions & Weight: 10 400 kg