Used Massi 0-750 Mm for sale (116,633)

Condition: used, mileage: 378,421 km, power: 551 kW (749.15 HP), first registration: 12/2013, fuel type: diesel, axle configuration: > 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Engine and Drivetrain* D16G750 engine with 750 hp * 12-speed I-Shift overdrive transmission ATO3512D * Heavy-duty program and additional off-road program * Manual gear selection in automatic mode including kickdown, AutoGo and tap-to-brake * Transmission oil cooler for very high loads and gross vehicle weights over 80 tons * Drive axle ratio 3.97:1 * RTH2610F drive axles with hub reduction * Differential locks between axles and wheels * Volvo Engine Brake+ engine brake * Additionally gearbox-mounted compact retarder with 450 kW braking power * Cruise control including brake cruise control * Speed limiter set to 90 km/h ----Chassis and Axles* Axle configuration 8x4 * One non-driven, electro-hydraulically steered and liftable front axle * Two driven rear axles * Technical front axle load: 9.0 t * Technical rear axle load: maximum 35 t * Reinforced rear axle mounting for gross vehicle weights over 100 tons * Front axle with two-leaf parabolic suspension * Rear tridem axle with air suspension * Electronic level control * Reinforced stabilizers front and rear * Two-circuit power steering * Leather steering wheel, adjustable in height and tilt * High-mounted chassis * Reinforced inner frame and 8 mm thick main frame. ----Braking System* Electronic Braking System (EBS) Medium * Volvo disc brakes with TCS * ABS * Solid brake discs with 430 mm diameter * Four additional spring brake accumulators Iedoz Igf Dspfx Amgjih * Automatic release of the parking brake * Stationary trailer brake up to 7 km/h * Two-cylinder air compressor with 1,080 l/min * EU standard connections for semi-trailers * Electric 15-pin trailer connector * Spiral hoses and connection elbow behind the cab ----Heavy-Duty Fifth Wheel Coupling* SAF-Holland/GF SK-HD 38.36 heavy-duty fifth wheel coupling, adjustable * Heavy-duty mounting on a 16 mm mounting plate * Fifth wheel coupling height 150 mm plus mounting * Kingpin size 3.5 inches / 90 mm * Fifth wheel position minus 425 mm * Towing hitch or towing device at the rear ----Cab and Comfort* FH16 Globetrotter XL cab * Air-suspended cab front and rear * Two bunks: * Lower bunk, foldable, with adjustable headrest * Upper bunk 700 × 1,900 mm, foldable and height-adjustable * Pocket spring mattress, medium firm * Premium mattress topper * Retaining net in front of the bunk * Cool box with 33 liters and freezer compartment * Auxiliary heater with 2 kW * Automatic climate control with several sensors and activated carbon filter * Electric sun visor * Curtains for windshield and side windows * Electric windows * Central locking with remote control ----Seats and Interior* Luxury driver's seat: * air-suspended * heated * ventilated * electrically adjustable * three memory positions * integrated seat belt * Air-suspended standard passenger seat * Two armrests on the driver's and passenger's seats * Armrests and grab handles with leather cover * Leather steering wheel * Seat covers in leather in black, green and yellow * Interior trim in gray, green and black * Dashboard in gray-brown and black * Luxury control panel on the bunk for lights, heating, climate, sunroof, windows, doors, radio and alarm clock * Writing table for the steering wheel. ----Audio, Communication and Displays* Audio High System * Radio with CD player and MP3 function * Bluetooth hands-free system * USB and AUX connection * Eight speakers * 4-inch driver information display * Additional 9-inch touch color display * Displays in German and French

Condition: excellent (used), Year of construction: 2003, Technical specifications: Isdpfx Amez I Ekxegsih Working length: 3240 mm Bending capacity, steel: 4.0 mm Bending capacity, stainless steel: 3.0 mm Bending capacity, aluminum: 8.0 mm Control system: DELEM DA65 graphic 2D CNC-controlled: angle, bending radius, and back gauge Bending angle setting: 0 – 150° Upper beam opening: 500 mm Back gauge travel up to 1100 mm, with table extension up to 3000 mm Motor power: 7 kW Dimensions (length x width x height): approx. 5300 x 2350 x 2200 mm Weight: approx. 7.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Ijdpfjz I Dh Aox Amgeih Spindle CM3 Spindle speed driven by speed variator Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Jungheinrich Type: MPB Included in the scope of supply: 1x Pallet racking crossbeam, used Material color: RAL 1007 Daffodil Yellow Box profile: 125 x 50 mm Iodpfxsz Ix Rfj Amgeih Crossbeam type: AUF´B´E 0485|15 Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per crossbeam pair: 2,400 kg, with evenly distributed load. 2x Safety pins, used Design: fully galvanized For securing the longitudinal supports To prevent unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional desired transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Ijdez Iz Iaepfx Amgsih Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth Tailstock CM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Condition: good (used), Technical data for the pallet racking beam: Racking system: Jungheinrich Type: MPB Ijdpfx Aoz I Rqdsmgoih Included in the scope of delivery: 01x Pallet racking beam, used Material color: RAL 1007 Narcissus Yellow Box profile: 100 x 50 mm Beam type: AUF´B´ E0480 Agraffe: 4 HK (hooks) Clear width: 1,800 mm Max. load per pair of beams: 2,000 kg, with evenly distributed load. 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports To prevent accidental lifting out. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), functionality: fully functional, overall weight: 175 kg, volume flow: 80 m³/h, final pressure: 0.06 bar, input voltage: 400 V, rotational speed (max.): 1,500 rpm, Busch Mink MM 1144B V03 Vacuum Pump Iodpfxoz Hbqxo Amgjih 2 pumps available with very little work done each. Pumps were purchased and installed for a project that was never commissioned. Selling on behalf of our customer.

Condition: good (used), Technical data for the steel beam: Manufacturer: Stow Type: Pallet Rack NS Included in the scope of delivery: 1x steel beam, used Material color: RAL 2004 orange Box profile: 145 x 50 x 1.75 mm Bracket: Single-sided, bolted crossbeam Overall length: 3,600 mm Note: Since this is a used item, scratches, damage, weld marks, or signs of rust may be present! Iodpfx Ajz Hvu Ejmgeih Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Ijdpsz Nxmksfx Amgjih Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -Drill diameter ~30 -Drilling depth 750 / Extension ~1000 -Tank -Pumps -Loading device Iodpfxsd Ri H Ej Amgsih -Tailstock

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws, stepped top jaws, top jaws -Manufacturer: Schunk, hard stepped jaws, 1 set = 3 pieces -Type: SHB-250 Jaw width 50 mm -Clamping surface: grooved -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 110/150/H67 mm -Weight: 3.4 kg Iiedpfx Amsz Szcajgoh

Condition: like new (used), number 8 Stück weight 3,8 kg/Stück range L-W-H 180 x 70 x 90 mm Iisdpfx Ajzdk Epomgsh Mounting block B50 - (Item No. Holding force 50 kN) This mounting block, made from high-strength aluminium, is an ideal complement to clamping elements in the MQ series and, to a limited extent, the S series, where clamping heights vary. Applications include forming technology and machining technology --> Height = 90 mm --> Length = 180 mm Price per unit, discount available for bulk purchases

Condition: good (used), Vise, bench vise, locksmith's vise, parallel vise, heavy-duty vise Isdpfx Asz Rvtdjmgsih -Manufacturer: Orion, solid vise type 12S -Clamping jaws: 125 x 25 mm -Wingspan: 210 mm -Dimensions: 435/200/H230 mm -Weight: 29.6 kg

Condition: used, functionality: fully functional, load capacity: 1,000 kg, construction width: 1,800 mm, Accessories Ijdoz Rr T Hspfx Amgsih ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical Condition: good Description: 2 hydraulic cylinders, hydraulically operated front section, teeth on the edge, robust side structure, approximately 0.9 m3.

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator Iiodpfxezkqt He Amgoh -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 -Load capacity: kg -Roller spacing: 320 x 950 mm -Rollers: Ø 240 x 170 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: - Pressing force: 250 kN - Max. sheet thickness: 10 mm Isdoz R Siispfx Amgeih - Max. punch size / punching diameter: 105 mm - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders - Punches and dies

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 4,452 h, load capacity: 3,000 kg, lifting height: 8,300 mm, free lift: 2,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,700 mm, fork length: 1,100 mm, rear tire type: superelastic tires (black), rear tire size: SE, overall weight: 6,400 kg, total height: 3,700 mm, total length: 2,000 mm, total width: 3,000 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, adjustable boom, front guard, head guard, lighting, pallet forks, New price: 21,900 EUR / Old price: 23,900 EUR. The Combilift is in very good condition. We sell forklifts after a complete service. Prepared for the end user. Ready for immediate use. Iiedpfx Amjz R Tb Hsgjh We can arrange transport within Europe and worldwide.

Condition: refurbished (used), functionality: fully functional, We offer 4 Schlick turbines – 320 mm, including 7.5 kW motors. Turbine model: Schlick ROTO-JET RB500 5.2/4/7.5 Turbine type: 5.2 Abrasive flow rate: 140 kg/min. Abrasive outlet velocity: 70 m/sec. Turbines have undergone a complete overhaul and original spare parts were used. Blasting machine, shot blasting, sandblasting equipment… PRICE PER UNIT: 2300 EUR. Iodsvphf Uspfx Amgjih

Condition: new, Heidenhain LC 192F length measuring system, ML 740 mm, item no. 387 093-32, serial no. 19543276H, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Iodpji Eal Rsfx Amgsih

Condition: new, Heidenhain LS 106C length measuring scale, ML 440 mm, art. no. 336961-40, serial no. 155103690F, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Iodpfx Amei Eap Hjgjih

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws -Manufacturer: Schunk, soft attachment jaws, 4 sets = 12 pieces -Type: SWB-200 Iisdpfxjzhuw De Amgoh -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 240/180/H60 mm -Weight: 16.3 kg

Condition: good (used), Technical data for the pallet racking crossbar: Racking system: Stow Type: Pallet Rack AS Included in the scope of delivery: 01x Pallet racking crossbar, used Material color: blue Box profile: 160 x 50 mm Crossbar type: PAB0336 Design: Head crossbar Clip: 3 HK (hooks) Clear width: approx. 3,600 mm 02x Locking pins, used Design: Fully galvanized For securing the longitudinal beams Iiedpsz Sadkefx Amgsh against unintentional lifting out Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Rotary accumulation table Ø 1,000 mm with drive head and adjustable-speed gear motor. The motor drives both the rotary table and the conveyor chain. Direction: CW (clockwise). Iiedpfxjz Sdqus Amgsh

Condition: used, machine/vehicle number: 04 897, consisting of: Iodoz Sdp Repfx Amgsih Rinser 15 Nozzles Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap

Condition: used, Year of construction: 1998, Cincinnati Milacron Sabra 750 milling machine, year of manufacture 1998. Isdpfxsz Smh Nj Amgeih