Used Milling Machine For Handles for sale (75,306)

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Lredpjxwdygofx Aa Rjr Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm Lodpfx Aasig A Erj Rorr total power requirement / kW weight of the machine ca. 950 KG

Condition: not inspected (used), x-travel 850 mm y-travel 440 mm Lsdpfx Aeud Illsa Rorr z-travel / mm Control TNC 355C

Condition: used, power: 175 kW (237.93 HP), fuel type: diesel, Year of construction: 2014, operating hours: 11,094 h, Atlas 350 MH – Long-reach – with grab, swivel, and magnet function – Hydraulic cab – 4 supports – Total weight 33,500 kg – 11,094 operating hours – Ljdszt D Tropfx Aa Rsrr = Further information = Year of manufacture: 2014 Model year: 2014 Drive: Wheeled GVW: 33,500 kg CE marking: Yes Reference number: 51 = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, power: 125 kW (169.95 HP), fuel type: diesel, Year of construction: 2012, operating hours: 14,463 h, Atlas 270 MH – Long-reach – with grab, swivel, and magnet functions – Hydraulic cab – 4 stabilizers – Total payload: 29,500 kg – 14,464 operating hours = Further information = Year of manufacture: 2012 Drive type: Wheeled GVWR: 29,500 kg CE marking: yes Reference number: 52 Lredpfx Aozt D Tlsa Rsr = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 a.m. to 7:00 p.m.

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Lrsdpjyg I Nfofx Aa Ror Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: used, Year of construction: 1986, Deckel Maho 800E, manufactured in 1986: - Table surface area: 600 x 1100 mm - Travel in x-axis: 800 mm - Travel in y-axis: 450 mm - Travel in z-axis: 500 mm Lrodpfx Aajza Am Es Rer - Footprint: 3000 x 2500 x 2030 mm - Weight: approx. 4000 kg

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, DECKEL FP4M Universal milling machine (1984) Lrodpfxszmhlfs Aa Rjr Serial number: 2203-1545 Control: HEIDENHAIN POSITIP 855 Travel distances: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Rapid traverse rate: 1300 mm/min Feed rate: 8 – 630 mm/min Table dimensions: approx. 800 x 460 mm Max. table load: approx. 600 kg Spindle speed range: 50 - 2500 rpm Tool holder: SK40 Without machine vice.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control system: Heidenhain iTNC 530 Operating hours: 54631 h X-axis 3500 mm Y-axis 1000 mm Z-axis 900 mm Drive power 30 kW Speed ??range 20–3800 rpm Rapid traverse 15 m/min Feed rate 4 m/min Clamping surface 2x 1600 x 960 mm Max. table load 2 x 4000 kg Machine weight (approx.) 21 t Machine dimensions (WxDxH) 10770 x 4100 x 3150 mm Lodpezufi Rsfx Aa Rerr Technical data / Accessories Universal bed-type milling and boring machine Milling head position: Vertical, horizontal (top, center, left, right) Heidenhain TS 120 3D touch probe Kekeisen TW 32 drum-type tool changer Knoll hinged-belt chip conveyor

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm B 16 214 mm 40 - 4000 U/min 0,54 kW M10 355 mm 485 mm 1027 mm 70 kg 125 - 490 mm 300 x 250 mm 82 mm THE HEIGHT-ADJUSTABLE HEAD MAKES IT IDEAL FOR SHORTER USERS, E.G., FOR TRAINING WORKSHOPS AND SCHOOLS PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment Lredpfx Aezv Ey Sja Rsr - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 13 / 15 (in E335/ST60) Manal feed Tapping device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Head height adjustment via toothed rack LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation Art. - No. 212.650 with B16 spindle Art. - No. 212.655 with MK 2 spindle (price on request) OPTIONS: Machine cabinet Drill package

Year of construction: 2021, condition: like new (used), Stick handling Biocone -> Stick I/O feed machine Manufacturer Biocone Year of purchase 2022 Separate conveyors for in and out (outfeed bagging features) Main layout attached Lsdpfx Asxmk S Isa Rjrr in operation for less than one year

Condition: good (used), Deckel FP1 milling machine, made in Germany by Friedrich Deckel AG, Munich. The machine is operational and in working condition. For more information, please contact us. Lrsdpfx Asw Amaioa Rsr

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. For more information, please contact us. Lrodew Al U Ejpfx Aa Rjr

Condition: good (used), Year of construction: 2007, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 5 rpm, quill stroke: 60 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 350 mm, table length: 650 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 5 rpm, table load: 250 kg, overall weight: 1,900 kg, Equipment: rotational speed infinitely variable, Travel X/Y/Z 400/350/400 mm, spindle speed 5 - 4500 rpm stepless, motor 8,0 KW, spindle taper ISO 40, control Heidenhain TNC 124, table size 650x350 mm, hydraulic tool clamping, coolant device, spash guard, handwheel, tool holders, machine feet, manual Lrodszuzu Njpfx Aa Rsr

Condition: refurbished (used), Year of construction: 1968, travel distance X-axis: 800 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill travel distance: 80 mm, total length: 1,000 mm, table width: 520 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 2,500 kg, input voltage: 400 V, workpiece weight (max.): 2,000 kg, We are offering this refurbished DECKEL FP2LB milling machine, year of manufacture 1968. Manufacturer: DECKEL Model: FP2LB Year of manufacture: 1968 Lrsdpfxox Sdxzs Aa Rsr Condition: refurbished Machine type: milling machine If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: good (used), Under power - can be tested Lrsdpfx Ajyw Ua Hsa Ror

Condition: used, Radial drilling machine REFORM, type RB 50-16 Year of manufacture: 2002 Drilling capacity in steel: max. 50 mm Tool holder: MK 5 Nominal overhang: 1600 mm Maximum overhang of the spindle to the column: 1600 mm Maximum overhang of the spindle to the column base: 1500 mm Minimum overhang of the spindle to the column: 340 mm Minimum overhang of the spindle to the column base: 240 mm Travel of the drilling head: 1260 mm Height adjustment of the arm: 600 mm Distance between clamping surface and drilling quill: max. 1100 mm Spindle speed: 25-2000 rpm Quill stroke: 300 mm Quill diameter: 80 mm Feed rate: 0.04 to 3.2 mm/rev (16 steps) Clamping surface of the base plate: 1750 x 980 mm (1650 x 840 mm) Column diameter: 350 mm Motor power, spindle drive: 4 kW Mains connection: 400 volts, 50 Hz - Spindle speed controlled via 16 gear stages with speed preselection and hydraulic gear shifting - Right and left rotation of the drilling spindle - Automatic feed via 16 gear stages with feed rate preselection and hydraulic gear shifting - Electro-mechanical height adjustment of the arm, with hydro-mechanical arm clamping - Hydro-mechanical central clamping of the head and column via push buttons Lsdpjzupamsfx Aa Rorr - Coolant system in the machine base Machine height with drilling head at the top: max. 2840 mm Space requirement L x W x H: 2400 x 1000 x 2650 mm Weight: 3.5 tons Good condition

Condition: good (used), Year of construction: 1971, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine, vertical milling machine -Manufacturer: Steinel, vertical milling machine type SV 4 -Clamping table: 740 x 200 mm -Cross table: 620 x 130 mm -Travel: X/Y/Z 340/100/300 mm -Spindle holder: MK2 Ledpfx Ajt E D D Iea Rerr -Speed: 112 - 2240 rpm right/left rotation -Feed: 0.10 - 0.71 mm/min -Quill stroke: 100 mm -Coolant system -Dimensions: 1000/950/H1830 mm -Weight: 650 kg

Condition: good (used), functionality: fully functional, Dovetail cutter / Trapezoidal groove cutter Lrjdpfszvn Hbjx Aa Rer with stops.

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Lrodpfxsxtu H Ne Aa Rsr Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1968, max. wheel diameter 120 mm gear width 130 mm max. module 2 no. of teeth to be hobbed 6-325 Z min/max. spiral pitch 20-5000 mm hobbing length 130 mm weight of the machine ca. 860 kg Universal hobbing machine MIKRON 102.05 MPS > External surface gearing Technical data: Maximum millable workpiece diameter: 120 mm Maximum millable length: 130 mm Maximum number of modules: 2 Number of millable teeth: 6-399 (with gear ratio 80:5) Pitch of the spirals: 20 - 5000 mm Pitch angle of the spirals (left or right): 0 - 90° 14 milling cutter revolutions (50c/s): 140 - 1870 rpm 13 Axial feeds: 0.05 - 3.0 mm/w.p.rev. Main motor speed: 1500 rpm Ledezupliopfx Aa Rerr Main motor power: 1.1 kW Connected load: 3 x 380 VAC Frequency: 50 Hz Control unit: Omron CP1L Machine dimensions L/W/H: 1030x800x1520 mm Weight of the machine: 880 kg

Year of construction: 1978, condition: used, A Caser-Saimp universal milling machine in need of repair but still operational is offered. Spindle taper: ISO 40, table size X/Y: approx. 1300mm/265mm, travel X/Y/Z: approx. 750mm/265mm/430mm, max. spindle speed: 1700rpm, spindle drive power: approx. 4kW. The X-axis can no longer be moved using the power feed. A servo motor was retrofitted to the X-axis (white assembly). Inspection possible by arrangement. Lodpezun Uiefx Aa Rorr

Condition: used, Emco F3 universal milling machine from a vocational training workshop With axis digital readouts Includes accessories as shown in the picture X: 350 mm Y: 300 mm Z: 200 mm Table: 600 x 200 mm Rapid traverse rate X, Y axis: 1200 mm/min Spindle speeds: 80 – 2200 (8) rpm Quill travel: 45 mm #8498 Net price Ljdjztwgfjpfx Aa Rorr

Condition: refurbished (used), A06B-6114-H105 FANUC servo amplifier module, refurbished and tested. Multiple units in stock. Lrjdpezi T Tyjfx Aa Rer Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6079-H106 Servo Amplifier module, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Lredozi T S Aepfx Aa Ror Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!