Used Mogensen Sieve for sale (386)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT34202038273, empty load weight: 5,680 kg, maximum load weight: 29,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 2,680 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: silver, Chassis, semi-trailer, logistics company Fine-grained steel welded construction in reinforced Scandic design, kingpin plate with replaceable 2" kingpin Outer frame in low-bed design: 7 pairs of lashing points embedded in the top and side of the outer frame, each with a capacity of 10 tons 10 pairs of combination pocket lashing points with ring lashing eyes (bolted) embedded in the outer frame, each with a capacity of 5 tons, approx. 72 x 42 mm internal dimensions Outer frame with "Load-Lock profile" for securing lashing straps, with a hole approximately every 400 mm 24 ton, 2-speed landing gear, single-side operation Kledpjzbbpuofx Aazsu Free swivel radius to the support foot approx. 2500 mm, support foot dimension approx. 2600 mm, extendable ladder at the rear 2 chock blocks with holder Aluminum side impact protection Steel under-run protection, galvanized Spray guard at the rear, covering the entire width Quarter panel fenders in front of and behind the axle assembly with anti-spray splash guards, only on the last axle 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable in front of the axles, 1x on the left and 1x on the right 1 storage box across the entire width, closed, below the loading area, approx. w=450 mm/h=400 mm/d=2460 mm mounted directly in front of the axles 3 lashing/stanchion rails with 4 pairs of locking cutouts embedded transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stanchions approx. 1782 mm), approx. 80 mm high. With cutouts at the top and bottom for lashing and inserting stanchions 80 x 80 mm. At the bottom, an angled sheet is used as a stop, open to halfway down. Combined design for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters 10 combination stanchions with cutouts at the bottom, w=80/ d=50/ l=1200 mm 6 stanchions, w=80/ d=80/ l=1200 mm, hot-dip galvanized Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension 1st axle automatic lift axle, additionally electrically operated from the truck, including forced lowering and starting assistance Braking system 2-line pneumatic braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front 24 Volt EBS, electronic brake system with EBS socket at the front Caution: The trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab Wheels and tires 385/65 R22.5" Steel rims "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side yellow LED lighting on the side, linked to the turn signal "flashing side marker lights" 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front 2 additional LED work lights at the rear 1 LED roof marker light with holder 2 pairs of warning signs, LED illuminated and extendable to 3,000 mm 2 additional LED work lights at the top of the front panel additional 7-pin socket in the under-run protection at the rear Floor Sieve plate, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 7,900 kg "Premium floor sealing" Floor sealed around the entire perimeter F

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,000 h, travel distance X-axis: 300 mm, number of axes: 3, Metal 3D printer manufactured in 2017. This TRUMPF TruPrint 3000 features a build volume of Ø 300 mm x 400 mm and is equipped with a 500 W fiber laser. It offers high-speed and high-density build rates, making it suitable for various applications. If you are looking to get high-quality metal printing capabilities, consider the TRUMPF TruPrint 3000 machine we have for sale. Contact us for further details regarding this machine. • Build volume: Ø 300 mm x 400 mm • Laser configuration: 1x 500 W fiber laser • Laser capacity: 500 W • Main supply: 360 – 440 V • Frequency: 50/60 Hz • Control voltage: 24 VDC • Connected load: 15 kVA • Full load current: 32 A • Nitrogen supply (N2): 6 – 10 bar • Argon supply (Ar): 6 – 10 bar • Air pressure: 5 – 10 bar • Laser operating hours: approx. 9,000 h • Last maintenance: 02/2024 • Condition: very good • Build material: AlSi10Mg only • Validated parameter sets: High Speed / High Density • High Speed build rate: 57 cm³/h at 60 µm layer thickness and 99.6% density • High Density build rate: 27 cm³/h at 60 µm layer thickness and 99.9% density • Optional accessories: • 1x build cylinder • 2x powder supply cylinders • Cooler • Pallet truck • Unpacking station • 2x new filters • 11x aluminum build platforms Kjdpfx Ajzarc Aoazjlu • Vacuum conveyor system • Sieving machine with control unit • Optional accessories year: 2017 • Optional accessories condition: very good Availability: approx. Q3/2026

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows Ksdpfx Ajzbavajazjlu - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: new, Korn-KALI® 38+6 Potassium chloride with added magnesium salts MINERAL FERTILIZER K2O (MgO, SO3) 38 (6, 12) Declaration of nutrient content (m/m) • 38 % K2O water-soluble potassium oxide (= 31.5 % K) • 6 % MgO water-soluble magnesium oxide (= 3.6 % Mg) • 12 % SO3 water-soluble sulfur trioxide (= 4.8 % S) Particle size Granules. 95 % of the product passes through a sieve with a mesh size of 4.8 mm. Ingredients • Potassium chloride (KCl), CAS No. 7447-40-7 • Sodium chloride (NaCl), CAS No. 7647-14-5 • Magnesium sulfate monohydrate (MgSO4 • H2O), CAS No. 14168-73-1 All ingredients are "primary raw materials and mixtures" (CMC 1). Instructions and dosages: For professional use only! Crop Yield Amount • Cereals average yield 200-350 kg/ha • Cereals high yield 250-450 kg/ha • Rapeseed average yield 230-600 kg/ha • Rapeseed high yield 150-700 kg/ha • Sugar beets average yield 350-1000 kg/ha Ksdpfozb Rlfjx Aazslu • Sugar beets high yield 450-1200 kg/ha • General recommendations are based on an average level of nutrient availability in the soil. • Recommended for soil application. • Suitable for crops that tolerate chlorides. Recommended storage conditions • Protect fertilizer stock with a tarpaulin. • Store in a cool (< 30 °C) and dry place! Safety and environmental information • To avoid hazards to human health and the environment, follow the instructions for the recommended use of this fertilizer product. Comply with local legal requirements! The stated price applies to a quantity of 1000 kg EXW, and transport costs are determined individually. Minimum purchase quantity: 24,000 kg.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts Kedpfx Aaeza A Txezolu 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Kedpfx Asza Agroazslu Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h

Condition: used, Year of construction: 2021, Sinterit Multi PHS + Sandblaster – Accessories as Shown in the Photos, No Vacuum Cleaner, 2021 The Sinterit Multi PHS (Powder Handling Station) with Sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It supports an efficient workflow for powder removal, material handling, and part cleaning, helping improve cleanliness and convenience during post-processing. This offer includes the Sinterit Multi PHS, Sandblaster, and accessories as shown in the photos. Kjdpfxjywurvo Aazelu Please note that the vacuum cleaner is not included. Production year: 2021. Key features: Professional powder handling and post-processing station for SLS printing Supports powder cleaning, sieving, and part finishing processes Includes Sandblaster for surface cleaning and finishing Accessories included as shown in the photos Industrial-grade design suitable for professional use Included in the offer: Sinterit Multi PHS Sandblaster Accessories as shown in the photos Vacuum cleaner not included

Condition: new, Year of construction: 2026, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Klsdpfx Aaexlzkrozsu Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. If you have any questions, please feel free to contact us.

Condition: as good as new (ex-display), Year of construction: 2025, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Ksdpfxjza D U Re Aazelu Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. If you have any questions, please feel free to contact us.

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Kledpsza Ek Hofx Aazou Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7614 Technical data: - Inlet width: 550 mm - Inlet height: 220 mm - Shaft width: 630 mm - Knife length: 630 mm - Number of knives: 2 pcs - Sieve dimensions: 60x60 mm - 2 lower toothed feed shafts - Lower shaft motor approx. 1.5 kW - Upper toothed feed shaft - Upper shaft motor approx. 1.5 kW - Vibrating chute - Vibrating chute length: 4750 mm - Vibrating chute width: 450 mm - Main motor: 45 kW - Vibrating chute motor: 1.5 kW - Auto-reverse - Reverse mode - Overall machine dimensions L/W/H: 3200x1700x1400 mm - Overall machine dimensions L/W/H: 4750x800x1100 mm - Weight approx.: 4500 kg ADVANTAGES – Auto-reverse (adjustable) – Reverse mode Kjdpfx Aajza Eipezslu – Used chipper, in very good condition Net price: 120,900 PLN Net price: 28,780 EUR (depending on the 4.2 EUR exchange rate) (Prices subject to change with significant exchange rate fluctuations)

Year of construction: 1983, condition: good (used), functionality: fully functional, 1 x Chip screening vibratory sieve Henri Petit Jean B 222 Year of manufacture: 1983 Kledpfeyx Di Tsx Aazeu with feed hopper Blower Accessories: 8 x various screens 1 x chip cart The machine can be inspected while powered on.

Year of construction: 1990, condition: ready for operation (used), Now available Used van Aarsen 1400 2D Hammermill incl. feeder with magnet. 200kW 3000 rpm Klodohbzi Nepfx Aazeu 2 pieces available Amount of hammers: 272 Weight: ca. 5850kg Sieve Diameter: 600mm More information on request

Year of construction: 1999, condition: good (used), Used Bühler controlsieve 4kW Drive Stainless steel sieve ø1mm Inlet ø200 Ksdpfjhq Hq Ssx Aazjlu Outlet ø200

Year of construction: 1980, condition: ready for operation (used), Used Ottevanger Hammermill incl. feeder with magnet. 160/200kW 3000 rpm or else 2 pieces available Weight: ca. 4000kg Sieve Diameter: 600mm Kjdpjpkzw Rjfx Aazelu Several spareparts available like hammers, screens, screenholders and impactplates More information on request

Condition: excellent (used), Year of construction: 2015, COMPLETE PELLET PRODUCTION LINE 6 t/h Kledpfx Ajqy Hcdjazeu Hydraulic walking floors - double for hard and soft wood Conveyor belt 12m with magnetic separator for chips Two hammer mills each 130 kW for wet material Two beams with hydraulic floor befor drum dryer Dryer for drums of 12 m FIEDLER boiler 3.5 MW Refiner 250kW with transport fan and filter Silos bin ZEPI for dry material Z conveyor ZEPI above three silo bins for pellet mill 0qe0k TRI Pellet Mill ZEPI ZPM600 with 200kW (2pcs) and 160Kw Pellet mill production year 2015 (two pcs) Conveyor belt 10m for hot ball, conditioner and aspirin system vibro sieve ESSEGI packaging system (ITA) 2019 Pallet system ROBOTIK KOGLER (SLO) 2015 Grecon spark detection system Electrical cabinet room for complete equipment Line in operation, capacity 6-7 t/h

Condition: excellent (used), CATALOG NUMBER 7899 Technical data: - Chipper intake section: 410mm x 180mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve size: 60x60mm - Upper feed roller, toothed - Lower feed rollers: 2 units, toothed - Infeed belt length: 2180mm - Infeed belt width: 400mm - Autoreverse (adjustable) - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4300x1600x1100mm - Weight: approx. 2000kg Kodpfxjzadvhj Aazelu ADVANTAGES – Italian manufacture – Non-painted – Electric adjustment of body height – Used multi-blade saw, very good condition Net price: 69,900 PLN Net price: 16,640 EUR with the exchange rate of 4.2 (Prices subject to change with significant fluctuations)

Condition: excellent (used), Catalogue number 7975 TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg Ksdpszadb Rsfx Aazjlu – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 Kledpfxshbdg Uo Aazsu ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2018, total length: 2,400 mm, total height: 1,000 mm, total width: 1,200 mm, Colour: Red Empty weight: 1.000 kg - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: 600-797 - Main motor power [kW]: 22,2 - Rotation speed [rpm]: 1770 - Rotor width [mm]: 400 - Number of shafts [pcs.]: 2 - Opening width [mm]: 385 - Opening length [mm]: 93 - Sieve perforation [mm]: 20 - Number of fixed knives [pcs.]: 18 - Transport dimensions: 2400mm x 1200mm x 1000mm (l x w x h) Klodjy Tmu Ujpfx Aazsu - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NUMBER 7610 Technical data: - Inlet width: 410mm - Inlet height: 140mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve dimension: 80x130mm - Top: single driven, toothed shaft - Bottom: 2 driven, toothed shafts - Infeed belt length: 2850mm - Infeed belt width: 390mm - Autoreverse - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4800x1550x1200mm - Weight: approx. 2200kg ADVANTAGES – Manufactured in Poland Kodpfx Aey Uxitjazolu – Autoreverse – Equipped with conveyor – DTR technical documentation – Used chipper, very good condition Net price: 75,900 PLN Net price: 18,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of major exchange rate fluctuations, the price may change)

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,800 kg, color: blue, operation weight: 1,800 kg, empty load weight: 1,800 kg, Year of construction: 2000, Beach Cleaning Trailer: Ksdpfxjwpi T Ss Aazolu + Kässbohrer + BeachTech STR 2000 + Year built: 2000 + PTO drive (540 rpm) + Working width: 185 cm + Guide wheels + 543 cm x 230 cm x 210 cm + Unladen weight: 1,800 kg; permissible total weight: 2,800 kg + Area performance: 22,200 m³/h + 30 cm max. working depth + Collection container 1.5 m³ tiltable to the rear + Rake / sieve + Smoother + Working speed: 12 km/h + Required tractor: 70 HP Get all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 770 mm, total height: 420 mm, overall weight: 300 kg, power: 3 kW (4.08 HP), type of input current: three-phase, motor manufacturer: Euronorm, Rotary Sieve Type KZ800 Available from stock: "Rotary Sieve 300" for all types of processes. Kedpfx Aaoxtvnujzjlu Product inlet dimensions: 250x250mm. Sieve basket size: Ø 800 x 300 mm. The "Rotary Sieve 300" has been processed by "ViwateQ". The machine is fully welded both inside and out. For further questions or photos, please contact us! A.J. van Velthuizen Metaalbewerking

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Kjdpfx Asdzqn Dsazelu Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: not inspected (used), Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range+Heine coating system for coating individual wooden window components and frames for sale on behalf of a client ----- Manufacturer’s technical description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Intended use of material from the relevant coating manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 crossbars/shift, i.e. approx. 60 window units/shift (without forced drying) Process (1 cycle is run twice): - Flooding - Drying - Checking and applying joint sealant - Spraying - Drying ----- ----- Item 1 Conveyor technology Kodpfxoy Ty E Hj Aazolu 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially comprising: 3 drives with gear motors for the main chains with frequency-controlled speed (see layout). Various running rails, horizontal curves, chains Tensioning stations, pneumatically/electrically controlled stop stations 50 crossbeams, 5,000 mm long (max. weight 250 kg) Automatic tilting of the crossbeams in the drip-off area after the flooding system 1 conveyor system control (Siemens S7-300 PLC) Programmable buffer stocks Infinitely variable drives. 1 lifting/lowering station for loading and unloading workpieces (max. stroke 2,000 mm) 1 set of steel structure for mounting the conveyor system ----- Item 2: Flood Coating System 1 flowcomat II-P 1 system for colourless primer Maximum workpiece width approx.: 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flood lances, each fitted with a maximum of 3 nozzles. 1 set of accessories for cleaning the system 1 stainless steel sieve fitted externally 1 paint supply 1 control unit ----- Item 3 Additions to the dip coating system 1 Drip channel and drip tray in the evaporation area behind the dip coating system After dip coating, the crossbars run into a drip buffer. The dripping coating material is returned to the dip coating system via the non-stick PP drip tray (and drip channel). Rinse water is collected in the flood coating system and pumped out. The use of PP for the areas in contact with the coating ensures easy cleaning of dried-on coatings. 1 Humidification system 1 Control unit for the humidification unit Complete with controller for the humidification volume 1 Hygrostat for measuring room humidity and activating the humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation system 1 R+H waco 200 coagulation system – 200 l collection tank ----- Item 4: Topcoat spray booths 2 paint booths for topcoating 2 extraction walls with sandwich panel cladding to suit the work area. Fan: 16,000 m³/h Filter area: - 3 sets of Ecola pre-separators - 1 set of Paintstop filters - 1 set of bag filters Recirculating air distribution ceiling in a tensioned frame design Volume 12,000 m³/h approx. 75% recirculation – 25% exhaust air operation (the exhaust air volume is extracted from the hall) installed on site-provided foundations in accordance with the layout 2 Prolac overspray recovery columns ----- ----- Item 5 Addition to the topcoat spray booths 3 humidification nozzles fo...