Used Ostas Kmrh 4,0 for sale (459)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side Hsdpfsx Tuzcox Algju 1 Eccentricpress 90 kN 4 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Hedozrprwjpfx Algju Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: new, sheet width 3100 mm plate thickness 6,0 mm distance between columns 3.100 mm down holder 14 Stück no. of strokes 16 - 24 Hub/min oil volume 150 ltr. cutting angle 0,5 - 1,5 ° thickness at "Niro-steel" 4,0 mm column arm 350 mm engine output 11,0 kW weight of the machine ca. 7.060 kg range L-W-H 4,1 x 2,2 x 2,19 m ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis Hodpfsxabcqex Algsu * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: used, Year of construction: 1968, roll diameter 500 mm throat 1050 / 485 mm workpiece height 300 mm saw band length 3920 - 4050 mm cutting speed 15 - 940 m/min table height 1040 mm table surface area 750 x 800 mm Table tiltable 15 Grad total power requirement 4,0 kW weight of the machine ca. 1750 kg dimensions of the machine ca. 2100 x 1000 x 2100 mm - Unique mitering range left/right up to 30° acute angle - Mitering adjustment via lockable detent every 15° - Adjustable saw blade for optimum cutting angle - Hydraulic clamping device on both sides - Electric blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating ball bearings - Additional table 450 x 450 - Machine light Hodpfx Aoiqp Erolgju

Condition: used, Year of construction: 1992, plate thickness 6,0 mm ST plate thickness 4,0 mm VA table-size 780 x 1000 mm blade length 200 x 200 mm strokes per minute 60 min engine output 3 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 1400 x 800 x 1300 mm Features: - Electro-hydraulic notching machine - 3x locking precision stop - Adjustment range 30 - 120 degrees, adjustment with the 2x front hand wheels - Electric stroke adjustment via digital display - Replacement blade (used) - Machine light - Side cut material ejection Hsdpfx Aou Dbv Tjlgou - Freely movable foot switch - Operating instructions

Condition: used, plate thickness 4,0 mm ST plate thickness 3,0 mm VA table-size 800 x 800 mm blade length 250 x 250 mm strokes per minute ca. 55 min engine output 4 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1300 x 1300 x 1300 mm Features: - Electro-hydraulic notching machine - 2x locking precision stops, with stop bars - Single/continuous stroke selectable - Front finger guard Hjdpovg R Rhsfx Algeu - Freely movable foot switch

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: Hodpfszdu Uzjx Algou - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions

Year of construction: 2001, condition: excellent (used), For sale: Costa A1 ACT 1150 belt grinder, year 2001. Configuration: soft cylinder with electronic segmented pad. Working width: 1150mm Belt dimensions: 1180x2620mm Pressure rollers for short workpieces. Fan for creating negative pressure, included. Air blast for both units. Total weight: 2500 kg 2 motors: 7.5 kW and 15 kW Total power: 27 kW Very good condition, machine is regularly serviced. Available immediately. Hsdpegq U R Nefx Algju

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: Hsdegvkktopfx Algju - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: used, MIG/MAG hose package, MIG/MAG welding torch Hodpjuahw Tsfx Algeu -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Passage height: appr. max. 200 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0,5 - 4,0 m/min., stage 2: 1,0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Hodoz Ark Ropfx Algju Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: used, Year of construction: 2000, grinding length 800 mm centre height 150 mm Control FANUC grinding wheel size max. 400 x 63 x 127 mm workpiece weight 120 kg engine output 7,5 kW turning speed range - grinding wheel 45 m/s m/s swivelling range +45/-15° Grad work piece spindle speed 22-313 / 51-750 U/min workpiece spindle swivable +/- 90 ° tailstock quill taper MT MK 4 x-travel 355 mm z-travel 4,0 mm Working speed 0 + 7,5 m/min weight of the machine ca. 4,0 t dimensions of the machine ca. BTH 3,7 x 2,2 x 1,9 m Hedeu Hag Njpfx Algeu -incl. Coolant system -incl. Lynette -incl. Sharpening diamond -incl. open Lynette -incl. 3 pieces of grinding discs -incl. 3 pieces of flanges -incl. Internal grinding spindle attachments

Year of construction: 2000, condition: like new (used), Second-hand machine which has never been used, YOM: 2000. Only the straightening part of the machine is available, thus, no the cutting system, neither the bank to receive cut parts (this can be purchased by the maker : Vitari). Capacity 4,0 mm max. Hsdpfx Asim Ittjlgsu

Year of construction: 2008, condition: used, Receiver capacity 90 l 750 L/min Motor output 4,0 kW Used Machine Year of Manufacture: 2008 Features and Technical Specifications: - Motor Connection: 400 V - Motor Power: 4.0 kW Hsdpfx Aloz Dkzzegou - Tank capacity: 90 L - Suction capacity: 750 L/min - Effective flow rate: 560 L/min - Cylinders: 2 - Speed: 1,450 rpm - Max. pressure: 11 bar - Weight: approx. 103 kg

Condition: used, Diesel Forklift Truck LUGLI Type 455e Front forklift, compact forklift Factory No. 5364010504 Year of manufacture: 2001 Rated capacity: 4,500 kg Lift height: 4,000 mm Fork length: 1,500 mm Fork carriage width: 1,300 mm Overall height: 2,720 mm Overall width: 1,460 mm Overall length without forks: 2,900 mm Unladen weight: 6,800 kg - Duplex clear-view mast with 150 mm free lift - Hydraulic side shifter (200 mm) - 4-cylinder PERKINS diesel engine, Type 1004.42, 60 kW - Hydrostatic drive with double pedal control (like Linde) with Linde/Poclain components - Fully enclosed operator cab with heating and removable doors - Fully hydraulic steering - HUSS particulate filter with electric cleaning via 230-volt plug connection - 2 front work lights, 1 rear work light - Yellow warning beacon on protective roof - Solid rubber tyres (front NEW 250 x 15, rear 23 x 9 - 10) - 5,650 operating hours (displayed) - New TÜV UVV inspection (surcharge EUR 150 net) Good condition Hodpju H R I Djfx Algsu

Condition: new, Year of construction: 2023, total length: 1,400 mm, · Arbeitshöhe max. innen 7,55 m · Arbeitshöhe max. außen 6,57 m · Plattformlänge – außen 1,40 m · Plattformlänge – außen, ausgeschoben 2,00 m · Max. Personen auf der Plattform (innen/außen) 2 / 1 · Tragfähigkeit 227 kg Hodpfxsxd Emuo Algeu · Tragfähigkeit – ausgefahrener Plattformausschub 113 kg · Verfahrbar bis max. Plattformhöhe 5,55 m · Fahrgeschwindigkeit – eingefahren 4,0 km/h · Fahrgeschwindigkeit – ausgefahren 0,8 km/h · Steigfähigkeit – eingefahren 25 %/14° · Wenderadius – innen/außen 0 / 1,37 m · Hub-/Senkzeit 26 / 20 sec · Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° · Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm · Antriebsart 24 V DC (2 × 12 V 115 Ah) · Tankinhalt Hydrauliksystem (E-Drive) 5,7 L · Max. Reifen-Traglast 570 kg · Reifenkontaktdruck 1.133 kPa · Bodenlast 12,14 kPa · Geräusch-/Schalldruckpegel (Boden) < 70 dBA · Geräusch-/Schalldruckpegel (Plattform) < 70 dBA · Vibration < 2,5 m/s2 · Standard-Blei-Säure-Batterie · Hinten eingelassene Steckdose für Ladegerät · Nicht klappbares Geländer, Schwingtür auf halber Geländerhöhe · Stromkabel zur Plattform ohne Fehlerstromschutz · Stromkabel zur Plattform · Senk-, Neigungs- und Bewegungsalarm · Plattform mit Riffelblechboden · Doppel-Blitzwarnleuchten · Elektronik Horn (Hupe) · Befestigungspunkte für Auffanggurte · Schutzabdeckung für Plattformbedienpult · Plattform-Lasterfassungssystem · Proportionale Fahr- und Hubsteuerung · SmartLink Zweizonen-Steuerung · Notablass zum Senken der Plattform · In voller Höhe verfahrbar · Elektro-Doppelscheibenbremsen an den Vorderrädern · Zwei AC-Fahrmotoren an den Vorderrädern (E-Drive) · Vorrichtung zum elektrischen Lösen der Bremsen (nur E-· Drive) · Vollintegriertes Diagnosesystem mit Batterieladungsanzeige · Lochfahrschutz · Seitliche und hintere Staplertaschen für einfacheres Umsetzen · Nichtmarkierenden Vollgummireifen · Tech Pro Link Anschluss · Verzurrpunkte und Kranösen

Condition: new, Year of construction: 2025, total length: 1,880 mm, - Max. Personen auf der Plattform (innen/außen) 2/1 - Tragfähigkeit 227 kg - Tragfähigkeit – ausgefahrener Plattformausschub 113 kg - Verfahrbar bis max. Plattformhöhe 5,55m - Fahrgeschwindigkeit – eingefahren 4,0 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25%/14° - Wenderadius – innen/außen 0/1,37m - Hub-/Senkzeit 26/20 sec - Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° - Nichtmarkierende Vollgummi-Reifen 25,4 × 7,62 cm - Antriebsart 24V DC (2 × 12V 115Ah) - Tankinhalt Hydrauliksystem (E-Drive) 5,7 L - Max. Reifen-Traglast 570 kg - Reifenkontaktdruck 1.133 kPa - Bodenlast 12,14 kPa - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5m/s2 Hjdpfoxd Emhex Algeu

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar Hedpfxjxna Uze Algju connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Year of construction: 1968, Technical details: Hjdovpfzyopfx Algju bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW dimension machine approx.LxWxH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m Hodpfx Asytcf Uelgsu dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: used, Technical details: welding current: 250 A Length: 815 mm height: 390 mm connected load: 4,0 kVA Hedpfx Aez Dt S Aelgou connected load: 4,0 kW open-circuit voltage: 16 - 32 V machine weight approx.: 104 kg

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm Hodpfjv Iplaox Algsu control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, Technical details: Hjdpju Iccpsfx Algju pressure: 315 t chamfer lenght: 5050 mm distance between columns: 4100 mm throat: 500 mm stroke: 250 (Wange) mm control: DNC 884s weight of the machine ca.: 27,0 t machine dimensions LxWxH: 5,7 x 2,2 x 4,0 m Machine stands approx. 0.95 m inside foundation in the floor. Application for: Embossing and free bending via the DNC control, manual, semi-automatic and automatic operation is possible. distance between table and upper beam max. 490 Table: with extension about 800mm, tool holder on the table = dovetail 30mm. accessories: many dies and punches *

Condition: used, Year of construction: 1992, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 420 mm spindle taper ISO: SK 40 control: Heidenhain TNC 360 quill stroke vertical: 75 mm turning speed range: 20 ... 4000 U/min spindle head swivable left - right: 90° links / rechts ° feed:: X/Y/Z: 1...6000 mm/min. feed:: X/Y: 7 m/min. + Z: 6 m/min. Table dimensions: 900 x 460 mm table load capacity: 400 kg weight approx.: 2300 kg dimension machine xH: 4,0 x 3,8 x 2,0 m Hjdsu Nc U Ijpfx Algou total power requirement: 13 kW Equipment: - separated production cell - coolant system - control panel with swivel-mounted boom - measuring probe SK 40 Heidenhain TS 120 - oil collecting basin *

Condition: used, Year of construction: 1992, Technical details: spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1450 mm z-axis: 930 mm w-axis: 506 mm B-axis (table): 360 ° control for program: HdH TNC 407 tool taper: SK50 number of spindle speeds: 5 - 1.600 / stufenlos table load: 4,0 t table-size: 1100 x 1400 mm table rotating: 360 ° feed steps: X/Y/W/Z-Achse: 2 - 2000 mm/min Rapid feed X axis: X/Y/W/Z-Achse 5000 mm/min. total power requirement: 40 kW dimensions electric cabinet: 2000 x 600 x 2000 mm machine dimensions LxWxH: 4,9 x 3,7 x 3,8 m weight of the machine ca.: 14 t CNC drilling-milling machine with hydraulic power unit. Working paths from the table: X-axis table transverse 1500mm Hsdpfx Asu Idqbslgeu W-axis table longitudinal 1000mm 9x T-slots according to DIN 650 Equipment: measuring probe electronic handwheel hydr. weight compensation Y-axis universal milling head And some accessories, ask for them! i.D. *