Used Progress Kbh 4849 for sale (216)

Year of construction: 1998, condition: used, Manufacturer : Buhler Machine model: K60 Number: SRB 220 Year: 1998 Type: Bead mill / grinder with conical slot agitator.   Dynamic pressure compensation in the mixer Cooling system for stator, rotor and separation ring. Grinding chamber volume: 4.8 dm3 / 4.8 liters Grinding chamber filling volume: 6.4 dm3 / 6.4 Litres Pressure system swept volume: 2.5 dm3 / 2.5 Litres Power rating: 30 kW Variable speed drive Pedpfx Aisx R A Daj Tsgu   Sold with progressive cavity pump PCM 2.6L10 Documentation available Product example : paints, pastes, …  

Condition: used, Year of construction: 2019, Highly flexible vertical machining center for milling, drilling and cutting. The BREMA patent for processing vertically, allows this series of machines to be the most flexible and productive machine par excellence to a very high quality level. Furthermore, the automatic return / rotation system of the panel makes it fully automated. Possibility of working in height up to 1300 mm, working on all 6 sides of the panel. Working dimensions: * length 300 - 2500 mm * height 60 - 1300 mm * thickness 10 - 80 mm * max weight 50 kg Machine programming and control system with PC - TPA Albatros software. Programming editor with a high-level software interface allows you to program the machine easily and intuitively and also allows: * linear, circular and helical interpolation * double zero reading * mirror program management * optimizer for revolver tool diameter * optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * import of work lists in ASCII format * extra key for programming from the office * gun barcode reader * 17” LCD monitor Pgjdpol Ikzgefx Ai Teu * Windows 7 professional operating system Panel introduction and handling by means of motorized vertical transfer with rollers and rubber-coated pressers for sealing of the panel during the workings, with a motorized carpet length of 2000 mm, with speed regulation electronically adjustable with converter. The photocells and the NC program guarantee the introduction of one or more panels in sequence using selector. Panel height reading system consisting of an independent axis able to read the panel height before getting into the car. Size reading tolerance +\- 0.15 mm. In case the tolerance is exceeded a message will inform the operator and the machine will stop the operation in progress. Panel thickness reading system using a mechanical feeler Horizontal vice - M.O. axis which allows the thickness of the workpiece to be established from the program. Vertical vice - M.V. axis which allows the program to establish the height dimension of the piece being processed. Chain - X axis - patent double section with laser photocells able to read the reference zero of the panel before carrying out the work. The double section allows you to carry out machining on the lower side of the panel thus having the possibility of work the panel on 6 sides. Brushless motors with programmable speed regulation by NC. Drilling unit with independent spindles 7 + 17 x 32 mm 24 independent spindles with 32 mm pitch arranged as follows: * 7 spindles aligned in X axis * 17 spindles aligned in Y axis Unit driven by a high-frequency motor that allows the rotation change of the spindles up to 7000 RPM The Brushless motor allows drilling depth control and forward speed control. Upper revolver milling group with 10 positions and tool change controlled by NC. 11 KW motor with direct transmission of movement to the tool up to 18000 RPM. The rotation of the revolver generated by controlled axis with Brushless motor allows quick tool change. 10 aggregate heads included in the revolver Automatic lubrication 180° panel translation and rotation system Movement and rotation system of the panel arriving from the machine which allows unloading or rotation of the panel and the return to the machine for machining on both surf

Condition: like new (used), Year of construction: 2004, machine/vehicle number: 41572121, Demag new/unused wire rope hoist. Despite the 2004 year of manufacture, this unit is still new and unused. Type: Demag DH520 H52 KV1 – 4/2-2 F10 Lifting capacity: 4000 kg Hook path: 30.20 m Hoisting cable: ø 11 mm Lifting speed high: 6.3 m/min Lifting speed low: 0.6 m/min Power: 3.6 kW Fine lifting: FG08 i = 10.00 Lifting motor: KBH 112 B4 Pgsdpjw Sktkefx Ai Teu Small lifting motor: KBA 71 B4

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Podpfxjz D S Sbj Ai Togu Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: used, Year of construction: 1994, Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC  The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. Pjdpjxcwx Hjfx Ai Tsgu The machine utilizes a three-stage compression configuration, which progressively increases air pressure. Additionally, each stage features combined aluminum and cast iron diffusers, while a cooling system with intercoolers at each stage and a final aftercooler enhances operational efficiency. Moreover, onboard instrumentation includes temperature and pressure transducers, ensuring continuous performance monitoring. Technical Data and Performance The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar operates with an absolute intake pressure of 99.3 kPa, whereas its discharge pressure reaches 8.23 bar absolute. It delivers an air supply capacity of 2190 m³/h, making it highly suitable for large-scale industrial applications. Its three-phase asynchronous squirrel cage motor runs within a voltage range of 380 to 415V, at 50 Hz, providing a nominal power of 680 kW and a rotational speed of 2970 RPM. Similarly, the motor features an IP23 protection rating and Class F insulation, allowing a maximum operating temperature of 100°C. Given these specifications, a star/delta starting configuration limits the number of starts to three when cold and two when hot per hour, thereby preventing excessive thermal and mechanical stress. Structure and Components A vertically split cast iron casing enhances the machine’s robustness, facilitating easy maintenance and quick access to internal components. In particular, the Bull-Gear, constructed from AGMA 12-grade helical steel, operates with oil-lubricated hydrodynamic sleeve bearings, ensuring reliability and longevity. Furthermore, the 17-4PH stainless steel impellers feature a semi-open design with backward-leaning blades to maximize aerodynamic efficiency. In the same way, aluminum and cast iron diffusers aid in pressure recovery and maintain operational stability. The lubrication system integrates an oil reservoir coated with epoxy for corrosion resistance. Additionally, a 0.75 kW pre/post lubrication pump, operating at 380/415V, maintains continuous oil circulation, protecting moving components.

Year of construction: 1997, condition: used, Used progressing cavity pump Manufacturer: Seepex Type: BN5/6L Psdpfxsilpwbo Ai Tjgu Com. No.: 97935 Year of construction: 1997 Pressure level: 6L Dimensions: L 1150mm

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Psdsvakdzepfx Ai Tegu Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: used, This listing is for 1 of 4 Liferiver EX3600 Extraction System. The unit is in full working condition and is ready for immediate release. The Liferiver EX3600 is a cutting-edge, fully automated nucleic acid extraction system designed to enhance laboratory efficiency and convenience. Here’s a detailed overview of its standout features and applications: Key Features: - Versatile Sample Volume: The EX3600 can process a wide range of sample volumes, from 20 to 200 microliters, making it suitable for diverse applications and sample types. - High Throughput: Capable of handling up to 24 samples in a single run, the EX3600 significantly boosts productivity, particularly in high-demand research environments. - User-Friendly Interface: The integrated LCD screen provides clear, real-time monitoring of the extraction process, allowing users to easily track progress and make adjustments as needed. - UV Sterilization: Equipped with a UV lamp, the system ensures sterilization of the working area, which is crucial for preventing contamination and maintaining sample integrity. - Quick Processing Time: The entire nucleic acid extraction process takes approximately 20 minutes, enabling rapid turnaround for critical experiments, such as those in diagnostics or research settings. - Magnetic Bead Technology: Featuring a magnetic bar for efficient handling of magnetic beads, the EX3600 streamlines the extraction process, reducing manual intervention and minimizing errors. Pgsdpfxexxyf Ij Ai Teu Applications: - Whole Blood and Plasma: Ideal for clinical applications, particularly in genetic testing or infectious disease diagnostics. - Serum Samples: Useful in biomarker discovery and research. - Cells: Supports cellular research and analysis. - Food Samples like Milk: Perfect for food safety testing and microbiological analysis. - Fecal Samples: Essential for studies in microbiome research or gastrointestinal health. - Specialized Use: - The EX3600 is particularly effective for extracting viral RNA, making it a valuable tool in the fight against infectious diseases, including COVID-19 detection. Trained laboratory personnel can prepare samples before utilizing the automated system, ensuring consistent and reliable results.

Condition: used, Material testing station / final inspection consisting of the following main components Keyence XG-H500M Digital 5-million-pixel B/W camera Keyence XG-7701P Multi-camera image processing system / controller Keyence CA-DC21E Lighting controller Opto Engineering TC23096 Bi-telecentric lens Keyence XG-H500M Digital 5-million-pixel B/W camera CCD: 2/3-inch monochrome CCD, square elements, all pixels have 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), Line skip (40.3 ms) Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Lighting controller Type: Lighting controller, only for XG/CV-5000/CV-X200/CV-X100 series Input: Forced shutdown of lighting: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse width modulation method (Emission frequency: 100 kHz) [Change controller settings] Brightness levels 255 levels digital [Change controller settings] Number of connections: 2 channels (available for LED connection and terminal block connection) Voltage: 12 VDC/24 VDC [Setting via DIP switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output/continuous lighting [Change controller settings] Response time (1) Constant voltage control: Max. 10 ms at 12 V output, Max. 20 ms at 24 V output (2) Pulse width modulation method: Max. 1 ms at 12/24 V output Display: LED display Supply voltage: 24 VDC ±10 % Power consumption: 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence XG-7701P Multi-camera image processing system / controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max. detector size: 2/3" Working distance (1) (mm): 278.6 Pgodpfx Aiog Sxmfe Tsu wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 CTF @ 70 lp/mm (%): > 40 Image area of the object (6) with 1/3" detector (4.8 x 3.6 mm) (mm × mm): 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm): 61.29 x 46.02 with 1/2" detector (6.4 x 4.8 mm) (mm × mm): 68.82 x 51.61 with 1/1.8" detector (7.13 x 5.33 mm) (mm × mm): 76.67 x 57.31 with 2/3" - 5 MP detector (8.50 x 7.09 mm) (mm × mm): 91.40 x 76.24 Dimensions Mount: C Phase setting (7) Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 Complete warehouse liquidation, large selection of storage shelves, pallet racking, shelving systems, vertical lift. High-quality industrial machines, lathes, grinding machines, hand tools. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2023, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, LEICA BLK3D – Professional 3D Photogrammetric Distance Meter Selling a Leica BLK3D in perfect working condition – the leading photogrammetric measurement tool for professionals in the construction, surveying, and architecture industries. Description The BLK3D combines a calibrated stereo camera, measurement sensors, software, and integrated edge detection functions, enabling image-based measurements with professional accuracy. (VERTICAL 3D) The device is equipped with 2 stereo photo lenses, allowing you to measure all elements appearing in the photo in 3D. (STTL) Each photo taken constitutes a complete set of measurements, including height, width, and depth. (Kuker-Ranken) Processing is done in real-time directly within the device (edge computing), without the need for a network connection or cloud services. (Tavco) Key Features Integrated photogrammetry: instrument combining a camera, advanced algorithms, and instant processing. Coupled with electronic distance measurement technology. Auto-targeting: visual recognition technology that allows you to select specific points for your measurements. Site documentation: measure inaccessible areas, create plans, estimate building installations, and document the progress of construction sites. Collaboration: share measurements with your colleagues via the BLK3D software (mobile or desktop version), export in JPG, or create PDF reports. Automatic geolocalization: each image is time-stamped and associated with the exact GPS coordinates of the capture location. (Kuker-Ranken) BIM/CAD integration: export in DWG/DXF for use in your CAD software, compatible with Autodesk BIM 360. (Kuker-Ranken) Technical Specifications Dimensions 180.6 × 77.6 × 27.1 mm Weight 480 g Tripod thread 1/4" (standard photo) Cameras 2 × 10 MP, 80° angle, 4 mm focal length Screen 5" IPS touchscreen, 720×1280 px Processor Snapdragon 820E Quadcore 2.35 GHz RAM 4 GB Internal storage 64 GB (~5,000 stereo photos) OS Android 7.1.2 Accuracy (good conditions) ±1 mm Accuracy (poor conditions) ±2 mm Maximum range 250 m (good conditions) / 120 m (poor) Battery 3,880 mAh – battery life ~4h Connectivity Bluetooth 4.1, Wi-Fi 802.11 b/g/n, GPS+GLONASS Pgedpfx Aijzif Nas Tju Ideal for: Architects, surveyors, quantity surveyors, site managers, building inspectors, engineering firms – any professional who needs to take measurements quickly on-site or during inspections. Sale includes: 1 BLK3D 1 Cable + charger 1 Battery 1 Microfiber cloth International shipping possible at your expense. - Interested in this equipment? Contact me via PM for more details or to discuss your 3D digitization needs!

Condition: good (used), Year of manufacture 2007 Operating hours 5,886 h Fork length 1,200 mm Load capacity 1,400 kg Lift height 6,876 mm Free lift 2,305 mm Mast height 2,875 mm, extended 7,926 mm PalmTech joystick control Pjdpfx Aisylmf Ns Tjgu 360° steering Fork carriage tilt with integrated sideshift Progressive fly-by-wire steering Own weight 2,450 kg without battery Battery 48 V Battery weight 1,119 - 1,200 kg Turning radius 1,688 mm

Condition: used, Keyence CV-X series industrial camera for image processing, inspection, and automation applications. Monochrome camera for use in industrial machine vision systems. Manufacturer: Keyence Type: Industrial camera Model: CA-HX048M Series: CV-X Camera type: Monochrome camera Image sensor: CMOS Resolution: 640 x 480 pixels Resolution: 0.3 megapixels Image acquisition: Progressive scan Lens mount: C-mount Application area: Industrial image processing Application area: Quality control Application area: Position detection Application area: Automation technology Condition: used Location: Kusel Pjdjzdnkpopfx Ai Togu Quantity: 4 units available

Condition: new, New product! Available from July 2024 - Pre-order now! PCW4500 - 2-stroke gasoline-powered portable winch Equipped with the CER500W engine from Maruyama, a commercial 2-stroke engine for professional use, offering an impressive pulling force of 1,200 kg. The STRONGEST winch from Portable Winch! The very first model with a 2-stroke engine in the product line. The Maruyama engine, with its 5-year warranty, makes it the most reliable on the market. With an incredible direct pulling force of 1,200 kg (2,650 lb) and a maximum pulling force of up to 6,000 kg (13,250 lb) when using 2 double pulleys. Equipped with a unique stainless steel cable brake (progressive capture system) that holds the load in place, a centrifugal clutch ensures better control, a protective plate adjusts to the foot when starting, and the pull bar on the swivel hook prevents the cable from tangling. The PCW4500 was designed for professional users who want to be convinced by the easy operation and safety of the device. - 2-stroke commercial quality engine from Maruyama Japan - Centrifugal clutch and stainless steel cable brake - Fuel: the same gasoline-oil mixture as for a chainsaw (see manual for more details) - Drum size: 76 mm *Note: The cable brake of the PCW4500 cannot be installed on any other winch. The device was specially developed for this model to facilitate the starting of the 2-stroke engine and to integrate the throttle and clutch control, which is not possible with direct-drive winches. DIRECT PULLING FORCE 1,200 KG DOUBLE PULLING FORCE (when using a block and tackle pulley) 2,400 KG WEIGHT 13 KG SPEED 12.2 m/min ENGINE MARUYAMA CER500W - 50cc, air-cooled 2-stroke gasoline engine, 360° tiltable GEARBOX Gearbox made of alloyed aluminum. Heat-treated 3-stage spur gear. Shafts with ball bearings. Oil bath lubrication Pedpfx Aio Adh Ixj Tsgu GEAR RATIO 200:1 CLUTCH Type: Centrifugal clutch BRAKE Operation with: automatic quick-release retaining brake Roller bearing with backstop DIMENSIONS 43 cm x 33 cm x 29 cm DRUM Ø 76 mm CABLE RECOMMENDED Low-stretch double-braided polyester Length: Unlimited Minimum diameter: 10 mm Maximum diameter: 12 mm INCLUDED: Polyester sling 60 mm x 2.5 m

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW Pgsdpfx Aet Hw D Dji Teu weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, tire size: 385/55-22,5, axle configuration: 6x2, wheelbase: 5,800 mm, fuel: diesel, fuel tank capacity: 630 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, loading space length: 65,000 mm, loading space width: 24,800 mm, loading space height: 6,000 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, tail-lift, trailer coupling, - Adaptive cruise control - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - Air suspension - Air-suspended seats - Particle filter - Radio/multimedia system - Disc brakes - Sunroof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Windshield - Additional steering axle Internal number for inquiries: 6-116 MERCEDES-BENZ ACTROS 2548 L ProCabin-Stream (flat floor) built as a container platform with FASSI F545RA.2.28 xe-dynamic loading crane. The vehicle is currently in the assembly stage (body, crane, etc., all in stock, assembly in progress). Image 1 KI Generated. Loading crane: FASSI F545RA.2.28 xe-dynamic, at 20.8 m, this crane still lifts 1650 kg (can be extended with 2 manual extensions up to 24.9 m and 700 kg) Endless slewing range Double knuckle system with PROLINK (over-extending knuckle arm up to 15 degrees) Pgedps Adua Iefx Ai Tju FASSI stability control Radio remote control with linear levers and display of the pressure width XF system (Extra Flink - Extra Agile) XP system (Extra Power) FL system (Full Lift) Outriggers operable via radio LED work lights Preparation for winch (a winch of the Fassi V30 model can be fully retrofitted at any time) and more Vehicle: Body: Platform with loading length 6700 mm, loading width 2480 mm Outer frame profile made of steel with lashing points at intervals of approx. 250 mm Edge protection made of aluminum SL profile 4x container locks as pull-out models, type Twistlock, galvanized, extendable for 3m containers Extendable overwidth marking with marker lights Toolbox 1200x600x600mm Chain box 800x600x300mm and more. Truck: Pro Cabin, L CAB STREAMSPACE, 2.50 M, FLAT FLOOR ENGINE OM471, R6, 12.8 L, 350 KW (476 hp), 2300 Nm HIGH PERFORMANCE ENGINE BRAKE SECONDARY OIL RETARDER TRANSMISSION G 281-12/14.93-1.0, MERCEDES POWERSHIFT 3 TRAILING AXLE, 9 T, STEERED, RELIEF, LIFTABLE SUSPENSION AIR/AIR DRIVE 6X2 TANK 630 L, ADBLUE TANK 60 L CENTRAL AXLE TRAILER COUPLING, D50, RINGFEDER or, if desired, 40mm DRIVER'S COMFORT SEAT COMFORT BED, LOWER REFRIGERATOR LEATHER STEERING WHEEL SUN BLIND, 1-PIECE, ELECTRIC, FRONT WINDOW MULTIMEDIA COCKPIT, INTERACTIVE DIGITAL RADIO NAVIGATION SYSTEM LED DAYTIME RUNNING LIGHT PREDICTIVE POWERTRAIN CONTROL LANE KEEPING ASSIST DISTANCE HOLDING ASSIST ATTENTION ASSIST TRAFFIC SIGN ASSIST ACTIVE BRAKE ASSIST 5 CRUISE CONTROL Vehicle version according to GSR, Phase C STARTING ASSISTANCE, SPEED LIMIT 30 KM/H ATS guarantee according to AGB, 3 years/450,000 km ATS guarantee according to AGB, 4th year/600,000 km MB 9147 Arctic White and more Financing possible via our financing providers. For further questions, please contact...

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Universal Testing Machine PM3 Force: 3 kN Traverse stroke: 1200 mm Pjdpoyc U Rbsfx Ai Tegu Working space depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Travel resolution: 0.01 mm Test speed: 1-500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be conducted without a PC. For tests requiring data storage and recording of the curve progression, the basic software enables both control and evaluation. The software allows you to generate various test sequences and create test reports. Additionally, you can further process the raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: used, SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 µm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample types: Supports SBS standard plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes, and microscope slides Throughput: Can image up to 250 plates per day Automation: Fully automated with options for integration into robotic systems Voltage (U): 100 – 240 V AC 50/60 Hz Power (P): 295 VA max Podswv Rayjpfx Ai Togu Manufactured: More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, mileage: 92,300 km, power: 85 kW (115.57 HP), first registration: 06/2023, fuel type: diesel, overall weight: 2,199 kg, fuel: diesel, energy efficiency: E, color: silver, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 5, total width: 2,159 mm, total height: 1,811 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill-start assist, FC5 Windshield with heat-insulating glass, I42 17" light-alloy wheels, JP7 Blind Spot Assist, P2W Advantage package, SA4 Airbag for driver and front passenger, B25 Parking brake, electric, BA3 Active Brake Assist, BB0 Braking system with ABS and ASR, BB3 Electronic Stability Program (ESP), C0Z Door sill trims with "Mercedes-Benz" lettering, C1J Gear shift knob in leather, C6L Multifunction steering wheel, CK4 Handle strip above license plate in vehicle color, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM0 Bumpers painted, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1K Navigation package, E2Z MBUX multimedia system incl. navigation & DAB, E3N Digital extra: Extended MBUX functions, E4S Digital extra: Smartphone integration, EC5 Pre-installation for digital extras, EI0 Wireless charging system for mobile devices, EM7 2 USB ports in the center console at the rear, ES1 12 V socket in the passenger compartment, ES2 12 V socket in the trunk/cargo area, EW6 Digital extra: Remote Services Plus, EX8 Digital extra: MBUX Navigation Plus, EX9 Digital extra: 3 years of free map updates, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, EZ5 Parking package, EZ7 Active Parking Assist, F4W Windshield washer fluid reservoir with larger volume, F56 Mirror in passenger sun visor, F58 Mirror in driver sun visor, F59 Exterior mirrors, electrically foldable and adjustable, F71 Interior mirror, automatically dimming, F73 Exterior mirrors painted in vehicle color, FC0 Decorative strip on tailgate, chrome, FE3 Power windows in front, electrically operated with convenience function, FE7 Power windows in sliding doors, FG1 Armrest with storage compartment, FG5 Bag, a. We can be reached by phone from Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! Podpsz Uq Epjfx Ai Togu - Errors and prior sale excepted!! - All information without guarantee ... more on our website

Condition: excellent (used), Double Vibratory Feeder / Positioner – Length 3.40 m – Stainless Steel Pjdjzxmf Uopfx Ai Tjgu Industrial double vibratory feeder/positioner, designed for feeding, distributing, orienting, and controlled transferring of products to the next stage of an automatic processing or packaging line. The unit incorporates two independent vibratory channels, each driven by its own vibration system, allowing the product to be distributed in a progressive and regular manner. This principle is particularly useful for preventing accumulation and achieving a more uniform feed to downstream equipment. With an approximate length of 3.40 m, the equipment features a robust industrial construction, primarily in stainless steel, suitable for professional lines in the food industry. MAIN FEATURES -Type: Double vibratory feeder / positioner -Approximate length: 3.40 m -Configuration: Double vibratory channel -Two independent feeding systems -Driven by electric vibrators -Controlled product distribution -Advancement by vibration -Continuous and uniform feeding -Positioning / orientation function depending on the product -Construction primarily in stainless steel -Open channels for easy access -Robust support structure -Design for continuous industrial operation -Suitable for integration into automatic lines -Can be used as a buffer between different stages PROCESS The product is received in the feed channels and, through the action of the vibratory motors, advances progressively along the equipment. The vibration allows the product to be distributed and spaced, providing a more regular feed to the machine located downstream. The double configuration allows the flow to be divided into two independent paths, which is particularly interesting when it is necessary to feed two inlets simultaneously, distribute a production, or improve the distribution of the product before a subsequent operation. It can be integrated with: Elevators Receiving hoppers Selection and sorting systems Slicers Weighers Dosers Fillers Packagers Conveyors Complete processing lines APPLICATIONS Especially suitable for food industries, fruit and vegetable processors, frozen food products, and packaging lines that need to regulate, distribute, or position the product before another machine. Depending on the configuration and characteristics of the product, it can be used with different solid or particulate products compatible with vibratory feeding. The combination of a double channel, 3.40 m in length, and independent vibratory drive provides a practical solution for achieving a continuous and organized feed within industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, Automatic Band Saw CORMAK H400SA The CORMAK H400SA automatic band saw is a high-performance machine designed for precise and repeatable cutting of large steel components, pipes, and closed profiles. Thanks to its double-column construction and automated operating cycle, it is an ideal solution for production plants, steel fabrication workshops, and logistics centers processing large quantities of material. Main advantages of the machine Podpsyctr Refx Ai Tjgu Fully automatic operation – complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return. Hydraulic feeding system and vice – ensure fast, safe, and precise cutting. Arm and vice position memory – reduces cycle time and increases efficiency during serial production. Cooling system and powered cleaning brush – extend the service life of the metal cutting band saw blade. Large cutting capacity – allows cutting materials up to Ø400 mm or 400 × 400 mm. Construction and technology The double-column band saw H400SA is based on a stable steel structure with a cast iron body, ensuring maximum rigidity and effective vibration damping. The saw frame is positioned at a 3° angle relative to the feeding table, which improves cutting performance when processing profiles and structural sections. Precision and work efficiency The hydraulically controlled arm movement with adjustable cutting force and a precision throttle valve allows the cutting pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller enables programming of the cutting length and the number of pieces. The LCD display provides information about the cutting progress, errors, and material availability. The automatic stop system reacts to faults or completion of the programmed cutting cycle, reducing downtime and improving operational safety. Applications The CORMAK H400SA automatic band saw is perfectly suited for: metalworking and steel construction industries, profile and structural section processing centers, serial production in fabrication workshops and industrial plants, companies cutting materials to required lengths. Standard equipment Automatic operating cycle Arm and vice position memory system Hydraulic power unit and feeding system Powered blade cleaning brush Coolant circulation system Bimetallic metal cutting band saw blade CE declaration of conformity Operating and maintenance documentation (DTR) Technical data Parameter Value Cutting capacity Ø400 mm or 400 × 400 mm Saw blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic unit motor power 1.5 kW Coolant pump power 0.09 kW Feeding stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 2100 kg

Condition: used, Year of construction: 2006, Offer in progress! Podpswftufjfx Ai Togu

Condition: used, functionality: fully functional, DEMAG DH525 H12, 5 t. Overhaul (technical and visual) possible by us. Without electrics KBH 140 B 2/12 Additional hoisting units, motors KBH / KBF / KBV / K-Motor, spare parts, rope guides, running wheels, brakes, and much more available on request. Pgedpfx Aox Ap R Uei Teu Please contact us by phone or email for questions or quote requests.

Condition: used, mileage: 128,200 km, power: 85 kW (115.57 HP), first registration: 05/2023, fuel type: diesel, overall weight: 2,199 kg, fuel: diesel, color: silver, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 5, Equipment: ABS, air conditioning, airbag, central locking, cruise control, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, FC5 Heat-Insulating Front Windscreen, P2W Advantage Package, EY5 Mercedes-Benz Emergency Call System, SD1 i-Size Child Seat Attachment, EY6 Breakdown Management, B25 Electric Parking Brake, CM0 Painted Bumper, EI0 Wireless Charging System for Mobile Devices, FK3 Chrome Radiator Grille, JK5 Instrument Cluster with Color Display, V23 Premium Interior Trim, T68 Child Safety Locks for Passenger Doors and Windows, Z1M M1 Registration, IA0 Axle Configuration 4x2, LG7 LED High Performance Headlights, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, EZ7 Active Park Assist, Q10 Cross-member for Towbar, T78 Side Door Track Cover in Body Color, HH4 THERMOTRONIC Automatic Climate Control, E1E Digital Extra: Hard Disk Navigation, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, VL2 Velour Floor Mats, E1K Navigation Package, ES1 12V Socket in Passenger Compartment, SF6 Driver's Seat Height Adjustable with Lumbar Support, ES2 12V Socket in Luggage Compartment / Load Area, RD9 Tires Without Brand Specification, H00 Warm Air Duct to Passenger Compartment, MS1 Cruise Control, HI2 Climate Zone 2 (Temperate), V3P Special Model, FE3 Power Front Windows with Comfort Function, W65 Tailgate, C6L Multifunction Steering Wheel, FE7 Electric Windows in Sliding Doors, LA1 High Beam Assist, RM7 Summer Tires, HZ0 Electric Auxiliary Heater, F56 Mirror in Passenger Sun Visor, H10 Seat Heating for Driver and Front Passenger, F4W Larger Washer Fluid Reservoir, E2Z MBUX Multimedia System incl. Navigation & DAB, XZ0 Model Generation 0, G7A 7-Speed Automatic Transmission, W70 Privacy Glass in Rear, Black Glass, V56 Carpet in Boot, V55 Carpet in Passenger Compartment, V57 Luggage Compartment Cover. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Pgsdjzvfvajpfx Ai Teu Further details: Leasing/financing and trade-in available! Errors and prior sale reserved! All details without guarantee ... more on our homepage

Condition: excellent (used), Modular Belt Elevator with Hopper – Discharge Height 1.85 m Inclined modular belt elevator in stainless steel with an integrated receiving hopper, designed for the continuous lifting and transfer of food products between different stages of the production process. The equipment combines a large stainless steel feed/accumulation hopper with an inclined modular conveyor belt, allowing the product to be received at a low height and progressively lifted towards processing, dosing, or packaging equipment. The modular belt incorporates transverse blades that facilitate controlled lifting of the product and reduce its backsliding during inclined transport. With an approximate discharge height of 1.85 m, it is particularly suitable for feeding processing machinery, hoppers, weighing systems, dosing units, and packaging equipment. MAIN FEATURES -Type: Inclined modular belt elevator -Application: lifting and transferring product -Discharge height: 1.85 m -Integrated receiving hopper in stainless steel -Plastic modular conveyor belt -Belt equipped with transverse blades -Inclined product lifting -Continuous feed -Stainless steel structure -Product receiving area at a low height -Elevated discharge -Designed for use in the food industry -Integrable into existing production lines -Industrial construction for continuous operation APPLICATION Pgedpfxozwv U Ae Ai Tju The product is received in the integrated hopper and continuously transferred to the inclined modular belt. The blades allow it to be progressively lifted to a discharge height of 1.85 m, from where it can be directly fed to the next machine or stage of the process. The hopper + elevator assembly is particularly useful as an intermediate feeding system between equipment installed at different heights. It can be integrated with: Processing machinery Washing and cleaning equipment Sorting and grading systems Filling and dosing equipment Multi-head weighers Packaging machines Accumulation hoppers Inspection systems Complete food processing lines APPLICATIONS Suitable for food industries, fruit and vegetable processors, frozen food manufacturers, seafood processors, and packaging companies that need to lift and transfer product automatically. Its stainless steel construction, modular belt with blades, and integrated hopper provide a practical solution both as a stand-alone unit and for integration into automated production lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, KEN 2311 Laboratory Washing Machine - Cleaning System - Lab Washer KEN 2311 is a compact cleaning and disinfection unit. It is used for washing, disinfecting, and drying (optional) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesia equipment, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, and glassware. Pjdsiuzlvopfx Ai Tsgu ■ User-friendly control panel - ensures correct operation ■ Option for individual program selection. 4 programs as standard ■ Process indicator bar shows the progress of the program ■ Dual temperature monitoring (EN/ISO 15883) ■ Connection option for 2 types of chemicals ■ Lockable lower compartment for storing chemicals Specifications: Power connection 3 x 400 V, N, J, 50 Hz Connection power/fuse rating 10 kW/16 A Water connection Cold, untreated water: 1 unit, ¾" RG, 5-30°C, 0-30°dH Water connection Hot, softened water: 1 unit, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water volume (approx.) per cycle 13-14 l Pump capacity 370 l/min Usable depth 2 doors 560 mm Usable depth without center panel 510 mm Usable width without center panel 510 mm Noise level approx. 59-64 dBA (sound pressure) Ingress protection class IP 21 (not suitable for dishwashers) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed from a location due to its closure and has been stored since, and is in functional condition. It appears to be in very good condition. Unfortunately, we do not have the knowledge or the instruments to test the unit further. Therefore, this unit is sold as is, as shown in the pictures. If you would like to test or inspect this unit before purchasing, please contact us at any time to arrange an appointment. You can find more items - new and used - in our shop! International shipping costs on request!