Used Röhm Kfh-140 for sale (4,853)

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Nmax:2800rpm in very good condition Lodpfxjqxavls Amvoag

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Hollow clamping cylinder RÖHM SZ-E68/115 459-109 ID No.: 426518 Serial No.: 22950 Operating pressure: max. 50 bar Speed: max. 5,000 rpm Piston diameter: 150 mm Piston rod diameter: 88/100 mm Piston stroke: 10 mm Internal diameter in cylinder tube: 68 mm Threaded connection for draw tube: presumably M79 x 1.5 mm Flange diameter: 185 mm Flange pitch circle: 140 mm (6x M12) Internal centering diameter: 101.7 mm - Flange connection towards spindle side Weight: 25 kg Required space L x W x H: 350 x 250 x 190 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic actuation of power chucks or collet chucks. Hollow clamping cylinder for hydraulic actuation of through-bore power chucks/collet chucks. Laedpfx Aeyy Dfksmvjg

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Model RKD-125 ID No.: 180467 / D2948 Year of manufacture: approx. 2010 Jaw width (step jaws): 125 mm Jaw height (step jaws): 40 mm Jaw width (add-on jaws): 135 mm Jaw height (add-on jaws): 49 mm Machine vice body width: 126 mm Lodpfx Aeyy Dfdemvoag Max. opening width: 141 mm per side (only with step jaws, without add-on jaws) Clamping force: 4 tons Guideway height: 105 mm - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 steps from 1 to 4 tons - Two clamping modes: single clamping with dummy, double clamping - Various clamping ranges via 3 guide slots in each base jaw - Step jaws (reversible) - Robust machine body, ground on all sides - Can be mounted horizontally, vertically or laterally - Middle jaw dimensions (L x W x H): 125 x 40 x 40 mm - Add-on jaw dimensions (L x W x H): 135 x 20 x 49 mm Overall dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Condition: ready for operation (used), Outer Diameter: 315 mm Boring: 95 mm hight: 112 mm Laodod H Ilvjpfx Amvjg weight: approx. 65 kg

Condition: used, machine/vehicle number: 721, jaw width: 200 mm jaw height: 62 mm Lodpfec U Nrujx Amveag span length: 250 mm place requirement: 500 x 280 x 165 mm weight:

Condition: ready for operation (used), Outer Diameter: 315 mm Laodpfxjd H Iltj Amvog Boring: 95 mm hight: 112 mm weight: 54 kg

Condition: ready for operation (used), Outer Diameter: 315 mm boring: 103 mm Ledpfed H Ilysx Amvjag hight: 120 mm weight: 54 kg

Condition: used, Outer diameter of chuck: 240 mm Bore: 77 mm Overall height: 105 mm Equipped with a short taper chuck flange according to DIN 55027, size 6 Lasdpfx Aodaqddsmvsg Includes externally stepped jaws and chuck key. Internally stepped jaws are not included!

Condition: used, Used three-jaw chuck Chuck flange with Morse taper for mounting in a tailstock or hollow spindle Lajdobnwrmepfx Amvsg Chuck diameter: 240 mm Morse taper size: 6

Condition: ready for operation (used), Outer Diameter: 300 mm Ljdpfxsd H I Syj Amvoag boring: 90 mm height: 110 mm weight: approx. 59 kg

Condition: used, machine/vehicle number: 3030, External diameter of the chuck: 250 mm Bore: 75 mm Overall height: 97 mm Lasdjdaqdkjpfx Amveg Equipped with a short taper chuck flange according to DIN 55027, size 8 Includes externally stepped jaws and chuck key; internally stepped jaws are missing!

Condition: like new (used), machine/vehicle number: 26879f, Outside Ø: 260 mm Passage: 70 mm with direct receptacle, short taper 55027: Gr. 6 Overall height: 90 mm Lodpfxjd Hyf Hj Amvoag

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Ljdpoxpqz Uefx Amveag Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: used, Outer diameter of the chuck: 240 mm Bore: 75 mm Overall height: 105 mm Equipped with a short taper chuck flange according to DIN 55027, size 6. Includes stepped jaws, both internally and externally, and a chuck key. Lajdpfxodaqdms Amveg

Condition: used, functionality: fully functional, Röhm Spannstock SSP 315/3 - ID No. 161508 - Pneumatically actuated stationary clamping block - 3-jaw power chuck - Operating pressure: 6 bar - Clamping force: 111 kN Lodpfxsyuwh Tj Amveag - Outer diameter: 415 mm

Condition: ready for operation (used), Year of construction: 1973, functionality: fully functional, machine/vehicle number: 162 026, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, table load: 15,000 kg, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 2,000 mm Travel range, Z-axis: 1,250 mm Travel range, W-axis (spindle stroke): 700 mm Table size: 2,000 × 1,500 mm Table load capacity: 15,000 kg Ljdjz Ahabepfx Amvjag Table rotation: 360° Table indexing: 1° Spindle speed: 8–800 rpm MACHINE DETAILS Position measuring system: Heidenhain linear scales EQUIPMENT Heidenhain linear scales

Condition: excellent (used), Year of construction: 2018, operating hours: 784 h, power: 18 kW (24.47 HP), lifting height: 12,200 mm, fuel type: diesel, fuel tank capacity: 37 l, color: other, Empty weight: 5.162 kg Dimensions (LxBxH): 376 x 175 x 274 cm Engine type: Kubota D1105-EF02 Lifting capacity: 363 kg Working height: 1.420 cm CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - Support legs = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Frankrijk Extendable work platform Laodpfjz D T Haex Amvog

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm Laedpfx Amjvb Dcmoveg ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: used, mileage: 114,000 km, power: 103 kW (140.04 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,363 mm, total width: 2,050 mm, total height: 2,522 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment in the dashboard (lockable), storage compartments: luggage net on the rear doors, audio system: UConnect with Bluetooth, antenna (radio antenna) integrated into the exterior mirrors, exterior mirrors electrically adjustable and heated, rear wing doors (opening angle 260 / 270 degrees), automatic climate control, cargo area partition, smoker's package, full-size spare wheel (including spare wheel holder) Additional equipment: Airbag on the driver's side, traction control system (ASR), driver assistance system: adaptive load control (LAC), rear wing doors without glazing, body/superstructure: large-volume van with extended overhang, fuel tank: 75 liters, heated crankcase ventilation, removable cargo area partition (without window), engine 2.3 liters - 103 kW turbo diesel Multijet, wheelbase 4035 mm, tire repair kit, low emissions according to Euro 6d-TEMP emission standard, sliding door for cargo/passenger compartment on the right, seats in the driver's cab: double passenger seat, start/stop system for the engine, tinted glass, interior trim in the cargo/passenger compartment: half-height (up to seatbelt height) The vehicle has some visible signs of wear and tear – see the pictures. Otherwise, it is in good condition! Valid TÜV (technical inspection) until 11-2026 Financing possible through Santander Bank. Laodpfx Aoz D Haasmvsg

Condition: used, Year of construction: 1997, functionality: fully functional, GEA Westfalia MSD 140-96-076 Whey Clarifier Lsdpfxszy Rlbo Amvoag Year: 1997 22,000L

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : Laodsz Dvuaspfx Amvjg - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total width: 810 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm Ledpfsz Dvt Njx Amvsag - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, total length: 4,150 mm, total width: 1,270 mm, inner radius: 2,200 mm, motor manufacturer: SEW, Belt curve conveyor/corner conveyor/belt curve 180 degrees Manufacturer: Transnorm Model/Type: TS 1600-140 Condition: used Overall length/outer radius without motor: approx. 4150 mm Overall length/inner radius: approx. 2200 mm Overall width including motor: approx. 1270 mm Overall width without motor: approx. 960 mm Conveyor width/belt width: approx. 800 mm Belt type: KT 36/smooth Laedpfx Aez Dx Aaomveg Nominal radius: 1200 mm Frame height: approx. 250/200 mm Includes 2 SEW motors Material: Steel/aluminum Includes 4 feet, height-adjustable The conveyor system was operational until disassembly. Offers will only be provided upon request and with the inclusion of a valid imprint; sales are only made to commercial customers. Internal article number: 2026092101 Thanks to the excellent workmanship of the conveyor system, your material will glide smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in various industries, such as logistics, pharmaceuticals, the trades, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or complementary components such as picking racks or containers. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Professionally disassembled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: excellent (used), power: 85 kW (115.57 HP), fuel type: diesel, color: other, Year of construction: 2022, operating hours: 1,195 h, Equipment: air conditioning, Technical information Number of cylinders: 4 Engine capacity: 3.409 cc Engine type: Doosan DM03VA Empty weight: 16.300 kg Dimensions (LxBxH): 737 x 259 x 284 cm Functional Maximum reach: 829 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Blower - Central lubrication - Hammer/sorting function - Hydraulic quick coupler - Radio Bluetooth - Rotation function Ledpfxjz Dqy Do Amveag - Rubber tracks - Seat heating - Sliding leaf - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier V General Country of production: Korea Condition CE type: CE Lehnhoff MS10 mechanical quick coupler, Hydraulic tilting bucket, air conditioning, Roadliner pads, central lubrication, rear and side view camera, CE document, Recently serviced at 1192 hours!

Year of construction: 2022, operating hours: 0 h, condition: new, Carrier weight: 20-33 tons Operating weight: 1800 kg Oil flow rate: 130-180 l/min Oil pressure: 150-170 bar Chisel diameter: 140 mm Ljdsiwxnvepfx Amvsag Impact frequency, Auto Start / Auto Stop mode: 400-800 bpm Sound power level: 120 db(A)