Used R.hogenkamp Transformer 380V(55A) - 44V(460A) for sale (1,882)

Condition: used, Year of construction: 2001, functionality: unexamined, overall weight: 4,580 kg, input voltage: 20,000 V, input frequency: 50 Hz, nominal power (apparent): 2,100 kVA, secondary voltage: 482 V, protection type (IP code): IP00, ambient temperature (max.): 40 °C, input current: 54 A, output voltage: 688 V, We offer this used ABB RESIBLOC transformer, manufactured in 2001. Type: RESIBLOC Serial number: 14201 1329/002 Rated power: 1,902 / 2,100 kVA Rated voltage: 20,000 / 688 / 482 V Rated current: 54.9 / 1,596 / 237 A Year of manufacture: 2001 Frequency: 50 Hz Protection class: IP 00 Cooling method: AN / AF Winding material: Cu / Al Insulation class: F / F Maximum system voltage: 24 / 1.1 kV Vector group: Dyn 5 Total weight: 4.58 t Impedance: 2 % Maximum duration of short circuit: 2 s Symmetrical short-circuit current: 30 kA Ambient/climate class: 40 °C Maximum daily temperature: 30 °C Nwsdpfozwdu Rex Agrjl Annual average temperature: 20 °C If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Nwsdezv S Rwspfx Agrol Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Nwsdpfx Aey St Sdegrol Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Betschart Swiss transformer core testing system KPA 15 function The output voltage, which can be infinitely adjusted by hand using a rotary knob, is fed directly to the excitation coils of the test core. As a result, in the air gap of the test core a homogeneous electromagnetic field is to be built up, with which core material inserted into the air gap can be characterized. The basic operation of the core testing system is carried out via the switching and display elements on the front panel on the front of the test car. Technical specifications Input voltage: 2 x 400 V - 50/60 Hz Input current: 38.3 A maximum Output voltage: 0 ... 230V Output current: 65 A maximum Measurements: Moving iron voltmeter 0 ... 500V for input voltage Moving iron Voltmeter 0 ... 250V for output voltage Moving iron ammeter 0 ... 40 / 80A for input current Moving iron ammeter 0 ... 75 / 150A for output current Laboratory sockets for external voltage measurement direct, 1: 1 Miniature circuit breaker 2-pole, 63A characteristic B Voltage measurement output voltage Current measurement output current Voltage measurement input voltage Current measurement input current Nwjdpfed Nxhkjx Agrsl Laboratory sockets for external current measurement Current transformer 50A / 5A Current measurement current transformer 75A / 5A output side Main and emergency stop switch Manufacturer price: 27,000, - € gross Matching variable transformers can be found in our shop More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2022, functionality: unexamined, machine/vehicle number: 310122/11, type of input current: AC, overall weight: 1,850 kg, input voltage: 400 V, input frequency: 50 Hz, nominal power (apparent): 630 kVA, secondary voltage: 400 V, protection type (IP code): IP00, space requirement width: 1,500 mm, space requirement length: 900 mm, space requirement height: 1,700 mm, input current: 909 A, type of output current: AC, output voltage: 20,000 V, Equipment: type plate available, We are selling our unused transformer. Location of the transformer: 74017 Taranto Nedey Nk E Aopfx Agrewl Italy The stated price includes delivery within Italy and is negotiable. For deliveries outside of Italy, please request shipping costs separately.

Condition: good (used), Year of construction: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U: the universal switchgear for industry and utilities Modular medium-voltage switchgear for solar power distribution Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV IP: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1 s) Nwsdpfxonfu Dye Agrel IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast Resin High Voltage: 10 kV Low Voltage: 400-230 V Circuit: Dyn5 Year of Construction: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear is pressure-relieved via a pressure-relief chamber in the lower part of the switchgear panel. Documents: Test Report Circuit Diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1998, functionality: fully functional, For sale: a K+G Wetter SM-65STL meat grinder/cutter. The machine is entirely made of stainless steel and is ready for immediate use. Power: 380V, 50A, 25kW. Knife shaft with infinitely variable speed adjustment, range 50-5000 rpm. Mixing speed (reverse), range 50-500 rpm. Bowl with 2 speeds, 9/18 rpm. 6-blade knife head. Without a deflector plate. Further details upon request. Payment by cash or prepayment! Sale only to commercial customers. No guarantee, no warranty. Nwsdpszxqpwsfx Agrjl

Condition: used, functionality: fully functional, machine/vehicle number: K7 25500, type of input current: three-phase, overall weight: 7,430 kg, input voltage: 10,000 V, input frequency: 50 Hz, nominal power (apparent): 3,000 kVA, secondary voltage: 500 V, protection type (IP code): IP00, input current: 173 A, type of output current: three-phase, output voltage: 500 V, 3-phase transformer (dry) from primary 10KV (± 5%) to 500 V secondary with a capacity of 3000 KVA Nwjdpfx Ajx Swaxegrol

Condition: excellent (used), Year of construction: 2000, Cast resin epoxy distribution transformer 1 pcs 2000kVA, manufactured by SGB Germany, voltage ratio 22000 ( ± 2 x 2,5 %) /400V, Dyn1 or 5 or 11, IP31 or IP00, Al/Al, temperature monitoring unit, functional. Njdpfx Agelpd Tcjrswl

Condition: new, Year of construction: 2024, New dry - epoxy casted distribution 3 phase transformer manufactured by TESAR Italy, 3500kVA, 22000 ( ± 2 x 2.5 %) /800V; Dyn1/5/11 (optional), IP33 outdoor installation, new, Ecodesign level 2 losses, project documentation and rutine test report, maintenance manual. Nwjdszc R T Sjpfx Agrol

Condition: excellent (used), Year of construction: 2009, power oil transformer 12,5MVA 110 / 23kV, manufacturer ETD Plzeň Czech, on load tap changer, conservator, functional, in operation since 2009, very good off-load and on load losses, price negotiable. Nwodshufn Njpfx Agrel

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Njdpfxjzugnzs Agrewl Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2838 664, type of input current: AC, overall weight: 4,710 kg, input voltage: 16,800 V, total height: 1,820 mm, total width: 1,270 mm, total length: 1,920 mm, nominal power (apparent): 2,000 kVA, secondary voltage: 420 V, protection type (IP code): IP54, temperature: 40 °C, space requirement width: 1,270 mm, space requirement length: 1,920 mm, space requirement height: 1,820 mm, Equipment: type plate available, Three-phase oil transformer according to IEC 60076, hermetically sealed design suitable for ambient temperatures from -25°C to 40°C and maximum installation altitude of 1,000 m above sea level, for outdoor installation, with aluminium windings, routine test according to IEC60076, in accordance with Regulation (EU) No. 548/2014 of 21.05.14 Stage 2, valid from 01.07.2021. Nwjdjynhwrepfx Agrol

Condition: used, Year of construction: 2013, operating hours: 1,680 h, functionality: limited functionality, air demand: 6.8 m³/h, pressure: 7 bar, total width: 4,800 mm, total height: 5,000 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 5,100 kg, input current: 63 A, input voltage: 380 V, Equipment: cabin, lighting, Professional industrial Vapormatt Leopard wet blasting machine in good working condition. The machine is fully equipped and comes from a professional production environment. Reason for sale: Due to a change in cleaning methods, this machine was taken out of service 2 to 3 years ago. The machine has not been used since. The machine functioned properly. This machine, which we purchased new in 2013, has always been kept in a clean and heated room. The machine must be sold due to lack of space. The machine is sold in its current condition. Technical description: Suitable for high-quality surface treatment, cleaning, and finishing of metal components in various industries, including: * aerospace * overhaul * precision engineering * metalworking * tooling and machine construction Specifications: * Brand: Vapormatt * Type: Leopard Nsdpfxozl Slas Agrewl * Year of construction: 2013 * Power supply: 380V * Phases: 3-phase * Frequency: 50 Hz * Connected load: 63A * Machine is fully operational * Includes integrated filtration/water treatment unit * PLC/HMI control system available * Complete installation Delivery: * Transportation and dismantling can be arranged, preferably with the buyer taking responsibility. (Incoterms to be agreed) * Forklift/loading options are available and can be discussed. Feel free to contact us or visit us to inspect the machine and discuss the possibilities.

Condition: good (used), Year of construction: 2018, travel distance X-axis: 800 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (max.): 5,100 rpm, spindle speed (min.): 10 rpm, table width: 230 mm, table length: 1,245 mm, type of input current: three-phase, overall weight: 950 kg, input voltage: 380 V, Used turret milling machine Brand: Optimum Model: OPTIMILL MF 2V Year: 2018 Weight: 950 kg Swiveling head with Siemens variable speed drive. 3-axis dimension display. Type: Turret milling machine with swiveling head ±90° (left/right) and tilting ±45°. Spindle taper: ISO 40 (DIN 2080 / DIN 69871) Speeds: Continuous electronic variable speed drive (typically 10 to 5,100 RPM). Table surface: 1,245 x 230 mm Travel (X / Y / Z): 800 mm / 305 mm / 406 mm Nwjdpfoz Ducvsx Agrol Motor power: 3.7 kW (Three-phase 380V) Automatic quill feeds: 3 Automatic motorization in X and Y axes with variable speed control and rapid traverse mode. Machine complies with CE regulations.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, operating hours: 5 h, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, number of slots in tool magazine: 12, controller manufacturer: Syntec, actuation type: electric, total height: 2,500 mm, total length: 10,000 mm, total width: 2,400 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, ELECNC2130ATC Nesting Machine #Working sizes 2100x3000x200mm #Italy original import HSD ES951 Newest ATC air cooling spindle, 24000RPM #Italy HSD brand 9 vertical drilling unit #With laser head #11kw Taiwan Delta inverter #Taiwan Syntec 60WE control system #850W Japan Yaskawa servo motor and 1000W servo drivers Nwedpfszxqz Hox Agrol #Japan Shimpo reducer,higher precision, more stable #Full Vacuum working table #2x7.5kw Tongyou air vacuum pump #5.5kw double bags dust collector #Taiwan PMI/ABBA linear guide, 25mm #1.5L Auto lubrication system #Linear tool changers, 12 tool changers under the gantry #12 pieces ISO30 tool holder #With pop up pins #Auto tool calibration  #With auto loading and unloading platform #With one tool box for spare parts #380V,3ph, 50hz Available for test in Tarnowo Podgorne, Poland. Have altogether 5 pcs for sale. After purchase we were not able to use them due to regulation and legal issues in our facility. 32 kW is for the whole set: autoloader, CNC with air pumps and auto unloader

Condition: good (used), Bosch VMA70CR001-D, 1070070783-508 plus VMA/000/0.42-D plug-in card 70A 380V-460V  Nsdeid Iiljpfx Agrewl Item condition: Used, in perfect condition Financing through our bank is also possible. komplett-konzept.leasingo.de Further plug-in cards - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2023, 1 pc cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 400kVA, 15000 ( ± 2 x 2,5 %) /400V; Dyn11, IP00, year of production 2018 ( connected / not energized ), ecodesign tier 1, project documentation and rutine protocol, manuals. Nwsdpfx Agsyhxlkorjl

Condition: good (used), Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm Nedpfx Asrgtfgjgrjwl -Weight: 51 kg

Condition: excellent (used), AREVA 400 kVA electrical transformer station with main low-voltage switchboard (TGBT) Year 2006 Nwodpfx Aoyr Aflsgrjl

Condition: used, Year of construction: 1989, input - primarily 400 V three phases output - secondarily reversible - 230 V three phases - 400 V three phases - 525 V three phases - 660 V three phases power 50 KVA space requirements width - 800 x depth - 400 x height - 2,000 mm Nwedpfx Agscw Twperjl weight approx. 430 kg

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. Nsdpfjz E A Nmox Agrswl The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: like new (used), Year of construction: 2020, operating hours: 3,270 h, functionality: fully functional, overall weight: 20,000 kg, Equipment: chip conveyor, documentation/manual, REIDEN RX 10 CNC control system: SIEMENS SINUMERIK 840D solution line, Sinumerik Operate 5-axis simultaneous machining 5-axis machining center with a 5-position pallet changer Travel ranges X-axis = 1,000 mm Y-axis = 1,100 mm Z-axis = 810 mm A and B axes Automatic horizontal/vertical swivel milling head as a fully functional, stepless NC axis from -1° to +90° NC rotary table Nwodpfxjz Dn Hbe Agrol NC rotary table Ø 1,000 x 800 mm - 360° continuously rotatable - Swivel circle Ø 1,350 mm - Table height above the workshop floor 1,050 mm - Max. table load 1,600 kg Main spindle drive DDT Speed 16,000 min-1 - Main drive 38 kW (100% duty cycle) - Torque 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder HSK 63-A Tool changer and tool magazine designed for 260 tools with HSK-A 63 Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter Laser tool setting, wear measurement and breakage monitoring, LC 50 version, Radio measuring probe, manufacturer Renishaw RMP 60 with HSK63-A Change station with H-gripper - Complete rotary table unit incl. zero-point clamping system - Additional pallet carrier with 4 pallet positions - Loading station that can be loaded with a crane - 5 pallets ø 1,000 x 800 mm, incl. MDynamics package for 5-axis machining - Advanced Surface application memory on CF card - Spline interpolation - Transmit and surface transformation - Automatic measuring cycles - 3D simulation - Sketching - ShopMill / ShopTurn - Work step programming - Residual material detection - Machining package for 5 axes - 3D tool radius compensation - DNC data transfer via LAN - Kinematics measurement (if measuring probe is available) - Programmed according to REIDEN standard Cooling unit / cooling system Water cooling system for milling head, rotary table motor, all feed motors and various bearing points 3 cooling circuits, cooling capacity 7 kW, tank capacity 40 l.

Condition: used, capacity in kVA 53,5 kVA input voltage 480 V output voltage / V length 800 mm Nwedpfxowth Ucj Agrsl width 600 mm height 530 mm weight 260 kg MITSUBISHI Dry type transformer 3PH 53.5 kVA TR-YU Condition: used functional

Condition: used, Year of construction: 1993, Technical details: Nwjdpfx Ageu Nifyjrol saw blade diameter: 250 mm saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, *