Used Schmedt Case Press And Joint-Setting Machine for sale (75,714)

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, year of last overhaul: 2026, Hydraulic finger jointing cycle press (Keilzinkpresse), cycle press for finger joint connections with a pressing force of 10 t. Wood width 80 – 300 mm, wood thickness 18 – 100 mm. OPTIONS: With 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD; with electrical installation. Tedpfx Ast Sc Swodzea

Condition: reconditioned (used), Fortuna Roll Press/Dough Dividing Machine, Size 3, for dough pieces weighing from 35 to 85 grams. The machine has been refurbished and repainted. Equipped with 3 forming plates. 4x16 Ah connection. Tedpfxoc Utkae Adzsa The machine is in excellent working order and can be put into operation immediately. If you have any further questions, please contact us. Thank you.

Condition: used, Rotary transfer table, rotary indexing table with 16 stations Rotary transfer machine + hydraulic press TOX Rotary transfer machine, special-purpose machine with several assembly stations Manufacturing and assembly system using a rotary transfer process From the special-purpose machine manufacturer "AKE-technologies GmbH" Serial number: Tsdogd D U Ejpfx Adzsa Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS, type TC500, with 16 stations - pressing station with TOX power unit - vibratory conveyor - conveyor belts - inspection stations - some stations are still visible in the pictures but have already been dismantled Space requirement L x W x H approx. 3500 x 2750 x 2300 mm Weight approx. 3000 kg All in like-new condition - The system has never been used in series production.

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 Todpfsdzqltjx Adzoa - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Tsdpjh U Dtuofx Adzja Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Pneumatic edge folding machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal edges For creating an edge fold Edge folding machine for thin sheet metal, as an alternative to a bending press Manufacturer's No. 9166002, Year of manufacture 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition Tjdpfx Adodzqblozsa The edge fold is the doubling of the sheet metal in the edge area, i.e., folded over once to increase the stiffness of the sheet metal. The fold creates a rounded edge, which reduces the risk of injury from cuts on the sharp sheet metal edge. Ideal for sheet metal processing of sheet metal furniture, cladding sheets, or for the construction of ventilation and soundproofing systems.

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank Tjdodzqaaspfx Adzja - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: excellent (used), functionality: fully functional, MINSTER DOUBLE GEARED STRAIGHT SIDE PRESS Todjy Rb Abopfx Adzja General Information Manufacturer: Minster Type: Double Geared Straight Side Press Model: 90K-1000-42 Serial No.: 90K-1000-26110 Capacity: 1000 Tons Specifications (Metric Conversion) Capacity: 1000 Tons Stroke Speed: 25–50 Strokes/Min (SPM) Stroke Length: 203.2 mm Slide Adjustment: 12.7 mm Shut Height (Bolster): 660.4 mm Shut Height (Bed): 850.9 mm Clutch Type: Air Clutch Type (142-GC) Number of Clutch Discs: 3 Discs Lubrication System: Forced Recirculating Lubrication Tie Rod Stretch: 3.56 mm Machine is currently operational Used for warm forging and aluminum production (not used at the full capacity of the machine) Inspected the machine is in a fully running condition Production-capable condition maintained continuously Operating video is available upon request

Condition: new, Year of construction: 2025, Bending machine PROD-MASZ to the plate ZGR 2640/1.2 is a sensational machine for precision bending of all types of metal sheets (steel 1.2mm, titanium zinc 1.2mm, aluminum of 1.5 mm, copper sheet 0.8 mm). Equipped with a rack supporting plate, two front bumpers, bending angle measurement, a single lock of bending angle, turnbuckles, eccentric mechanisms. Each part of the machine is adjustable, which allows for adjustment of the arc bending. Used in the device locking system (set by the operator) allows you to achieve the desired angle of bending. Table rear and front bumpers are made of galvanized racks. Ideal for all kinds of steel treatments - wherever the roof is exposed to moisture infiltration. Proper execution of these connections certainly prolong the life of the roof. By hers construction she can be used not only for bending panels with both the ferrous metal, sheets of plastic and fiberboard. - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 24 mm - Protractor - Weight: 350 kg Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Only shipping is possible Delivery every week Tjdpfsdad Adox Adzja Price excl. shipping We provide invoices with 0% of tax.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Tsdpfsvz E Tgox Adzja Weight 2200 kg Total power requirement 44 kw

Condition: new, Year of construction: 2025, functionality: fully functional, Scope of application This machine can be applied to hard-shell hardcover book, soft book, card book, etc., with high precision, book square, lining paper glue uniform, three sides of the drift consistency, to overcome the characteristics of uneven glue, CAM structure at the same time on both sides of the glue, can achieve the cartoon book side to retain a centimeter empty, shell positioning accuracy, to ensure the consistency of products. Features of the machine 1, using Delta PLC control system; 2, Delta servo control motion system; 3, weinview touch screen operating system; 4, anti-scratch shell cover system; 5, the back automatic positioning structure system; 6, quickly replace different sizes of product structure system; Tjdpsyzdu Uofx Adzea Machine speed 6-12 copies/min Machine size 2390x1000x2060 Power 3kw Maximum size 330x300mm Minimum size 150x60mm Machine weight 750kg

Condition: ready for operation (used), Year of construction: 1984, Press force: 3600kN, press force stroke: 1.7mm, press work capacity: 6120J. Stroke: 60mm, installation height: 340mm. Table clamping width/depth: 440mm/525mm, tool holder width/depth: 440mm/320mm. Dimensions X/Y/Z: 1300mm/2000mm/2230mm, weight: approx. 6300kg. Tedpjr A Eifsfx Adzoa

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Tedpfev Tnytjx Adzoa

Year of construction: 2008, condition: ready for operation (used), Zwei Eckverbindungsmaschinen Schüco für den Fensterbau stehen zur Verfügung. 1) Schüco CC 120 A, Baujahr: 2008, max. Profilhöhe: 120mm, max. Stanzhöhe: 105mm, min. Rahmen-Innendimensionen X/Y: 400mm/400mm, Maschinendimensionen X/Y/Z: ca. 1450mm/1500mm/1000mm, Gewicht: ca. 700kg. 2) Eckverbindungsmaschine Schüco, Baujahr: 1997, Nenndruck: 0,7MPa, Luftverbrauch: 100l/Ecke, Gewicht: ca. 650kg. Eine Besichtigung vor Ort ist möglich. Tjdpfewwlk Asx Adzoa

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Tsdpfxsv T Aqys Adzoa Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Tedpot Sc T Ijfx Adzea Cycle press for finger joint connections Finger jointing press Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit

Condition: new, Year of construction: 2025, Corner Jointing Machine EV175 Stable and precise corner joints Tedsxta Rmepfx Adzea The EV175 combines cost-effectiveness with high corner stability. The ideal machine for all standard profiles and corner brackets.

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Todpfjvwfaxex Adzsa

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Tedevwfqqjpfx Adzoa

Condition: used, used manufactured by Kuper type Mini 420 Tsdpfx Adovwf Dwszoa range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 1,000 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: CypCut FSCUT 3000DE, laser type: fiber laser, laser source manufacturer: Reci, laser hours: 1,000 h, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 245 mm, pipe length (max.): 6,000 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 15 bar, Equipment: centralized greasing system, cooling unit, dust extraction, fume extraction, 2 kW Fiber Laser for Sheet Metal Cutting + Pipe Cutting Attachment Ø245 mm – Complete HOYSOOK Set, Model 3015, in Excellent Condition – Used Only for Short Production Test Series, Year of Manufacture: 2024. Manufacturer: HOYSOOK Model: 3015 Year of Manufacture: 2024 Tedpfxeytccgs Adzea Fully Industrial Set Reason for Sale: Change in Production Profile Operating Hours: < 1000 h Description: For sale: Modern fiber laser (2,000 W) for cutting sheet metal and pipes. The machine is in a full industrial configuration, manufactured in 2024, and the laser source has less than 1,000 hours of operation – practically as new. The machine is fully operational and ready for immediate commissioning at its new location. The unit was used exclusively for small batch production and has only gone through the break-in period (picture of the meter available in the gallery). The sale is due to a change in production profile – the device will not be used as frequently as originally planned. Working Parameters: • Sheet metal cutting area: 3000 x 1500 mm • Maximum pipe length with attachment: 6000 mm, diameter Ø245 mm • Power supply: 380 V, 3-phase, 50/60 Hz • Positioning repeatability: ±0.03 mm • Maximum cutting speed: 50 m/min • Cutting examples: mild steel up to 12 mm, stainless steel 2 mm, aluminum 1 mm Industrial-Grade Equipment: Mechanics and Drives: • Welded steel bed, hardened and tempered – maximum durability and stability • Gantry beam made of aluminum profiles • Veichi servo motors and drivers • France Moto gear reducer • Taiwanese YYC gear rack • TBI ball screw • HIWIN (Taiwan) or SMAGIC (Japan) linear guides Laser Head and Source: • Raytools BM110 laser head with autofocus and automatic height tracking function • Reci laser source, total hours

Condition: new, For processing all common aluminum window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Universally applicable due to the double-adjustable punching tools. For corner angles with a groove dimension of 25 - 60 mm and profile chamber offset of 0 – 40 mm. Infinitely adjustable buttons, punching blades, and stop inserts in height. Buttons and punching tools are marked with scales. Retractable stop for easy insertion of the profiles, with automatic adjustment when moving towards the profile. Hydraulic stop locking mechanism. Pneumatic pressing process via a lever system, ensuring a synchronous punching process. Todshmfyhjpfx Adzsa 2 pneumatic clamping cylinders for tensioning the profiles. 2 eccentric disks for positioning the frames. 2 pivoting profile support arms. Operation via 2 foot valves. Includes standard tools.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Todpfsyrrpyox Adzsa Important note: The installation is not dismantled, the potential buyer must include the costs of dismantling.

Condition: refurbished (used), Cross Rail Milling Machine Rsc Tccgsx Rdw Ioxasck Manufacturer: Stegherr Type: KSF Designed for milling cross rail joints, e.g. in windows, doors, and furniture. Equipped with 3 milling units: One upper and one lower milling unit perform parallel milling operations similar to angled cuts, while the third unit simultaneously performs flush milling. The machine table moves pneumatically-hydraulically. Proc Tccjw Imhcogxaef Feed and return speeds are adjustable. Foot-operated control. 2 motors, each with a power of approx. 2.2 kW Total power consumption approx. 4.5 kW Compressed air pressure: 6 bar Voltage: 380 V 50 Hz Tjdpfx Adex Rhwlozja Suction connection diameter: 180 mm

Condition: new, Year of construction: 2025, We provide our customers with a modern and comprehensive service in the field of building sheet metal working machines. Long-standing employees guarantee continuity and a high quality standard. Thanks to ongoing training, they meet the high requirements. Folding bench ZGR 2640/0.8 Guarantee 12 MONTHS. Tsdpfx Aschuylodzja Certificate CE 2640mm working length STEEL SHEET 0.8 mm Bending angle 145 * shearing along the entire working length, raise the upper cheek in three layers, maximum clear width between the cheeks 80 mm rear rack for holding sheet metal, Servo motors for lifting the cheeks, cutting limiter at the front to ensure the specified cutting width, Roller scissors - with adjustment of the scissors guide and rollers made of high-alloy steel of very high resistance to wear. This allows sheet metal to be cut over a very long period of time without the need for grinding the roller shears. The performance of the roller shears is about 40 km of sheet metal with a thickness of 0.5 mm - up to the first grinding. The roller shears can be sharpened an average of 35 times. The roller cutter weighs approx. 6.5 kg. Roller scissors plus 350 euros Manual folding machine plus 75 euros the weight 290 kg Delivery: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.