Used Schneider Senator 92 E-Line for sale (75,316)

Year of construction: 2020, condition: refurbished (used), Dear customers, To ensure a fast and reliable response to your inquiry, we kindly request that you contact us preferably via email. Lredpfx Aaoftb Ebs Rer This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! For suction diameters from 120 to 700 mm. Please let us know your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs, made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hood, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industries. Below, you can select the cyclone with the right size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Year of construction: 2021, condition: used, Eillert G-1500 Vegetable Cutting Line – As New Condition – Only 147 Operating Hours Available Immediately An exceptional opportunity to acquire an Eillert G-1500 universal vegetable cutting line in genuine as-new condition. This machine has only 147 operating hours and is supplied complete with a preparation table, outfeed conveyor, and three interchangeable knife sets. The G-1500 is a highly versatile vegetable cutting machine designed for medium-capacity production environments, including fresh-cut vegetable processors, salad factories, commercial kitchens, and food manufacturing facilities. It is suitable for processing a wide range of products including lettuce, cabbage, leeks, carrots, peppers, beans, herbs, and many other vegetables. Lsdpjzgfyajfx Aa Rjrr Included in this Offer - Eillert G-1500 vegetable cutting machine - Stainless steel preparation table - Outfeed conveyor - 3 interchangeable knife sets - Touchscreen control panel - Mobile stainless steel construction - Complete and ready for production Key Features - Only 147 operating hours - Genuine as-new condition - Hygienic stainless steel design - Quick-release belts for fast cleaning and sanitation - Cutting compartment fully separated from mechanical components - Interchangeable knife system for maximum flexibility - Precise scissor-cutting principle for excellent product quality and shelf life - Suitable for leafy vegetables, root vegetables, herbs, and many other products Technical Information - Model: Eillert G-1500 - Capacity: approximately 100–800 kg/hour depending on product and cut size - Cutting range: 1–50 mm - Power supply: 400V / 3 Phase - Power consumption: approximately 1.25 kW - Stainless steel construction - Variable belt speed - Dual knife speed system Condition This machine has seen extremely limited use and has accumulated only 147 operating hours since new. The overall condition is excellent, both mechanically and cosmetically, making it a perfect alternative to purchasing a new machine at a significantly higher investment. Applications Suitable for processing: - Lettuce and leafy greens - Cabbage - Leeks - Carrots - Peppers - Beans - Herbs - Cucumbers - Onions - Various fresh-cut vegetable products Machine can be inspected and tested under power by appointment. Location: Emmeloord, The Netherlands Condition: As New Availability: Immediate

Condition: used, Year of construction: 2006, Overview  Lredjyighiopfx Aa Rsr This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data - Capacity: - 212 ml round plastic: up to 2,700 bph - 250 ml oval plastic: up to 2,700 bph - 1,000 ml round plastic: up to 900 bph - 1,000 ml oval plastic: up to 900 bph - Application: - Glass & PEHD (plastic) - Neck finish: - Screw-on caps Ø 30–40 mm - Twist-off caps - Formats: - 212 ml, 250 ml, 1,000 ml Scope of Delivery  - Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min - Conveyor | Breitner | TP 6052 | 2006 | — - Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min - Rotary Sorter | Breitner | DS 8003 | 2006 | — - Feeder | Breitner | SFB 8001 | 2006 | — - Conveyor | Breitner | TPK 6042 | 2006 | — - Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min - Conveyor | Breitner | TPE 6032 | 2006 | —

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control Ljdpfxezhub As Aa Rerr - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Year of construction: 2023, condition: ready for operation (used), A recirculating rack oven WP is available. Tray dimensions X/Y: 600mm/800mm, max. rack trolley diagonal: 1070mm, max. rack trolley height: 1800mm, baking area: 10m², max. tray load: 350kg. Machine dimensions X/Y/Z: approx. 1550mm/1650mm/2550mm, weight: approx. 2000kg, controls: Navigo 3. Documentation available. An on-site inspection is possible. Lrjdpfjx Iviksx Aa Rjr

Condition: ready for operation (used), functionality: fully functional, Ready slaughterhouse Complete slaughter line – the system integrates specialized machines at every stage – from animal reception and stunning, through scalding and organ removal, to final cutting, cooling, and packaging. Lodpfewu U Irex Aa Rsrr The modular design ensures scalability, allowing for expansion or configuration adjustments as production needs evolve. Thanks to advanced automation and ergonomic solutions, the line minimizes manual labor while improving operator safety and work efficiency. This turnkey solution has been designed for reliable, high-performance operation in compliance with EU regulations, making it an ideal investment for modern meat processing plants.Wydajność linii: Line capacity: 80–120 pigs per hour Scalability: thanks to independent subsystems and automation The line includes the following elements: 1. Animal Receiving and Handling Location: animal scales, Office vestibule, Livestock Separation Equipment: Animal scales – accurate weighing of livestock (capacity: up to 120 pcs/hour) Hand and apron disinfection washers – ensure staff safety 2. Stunning and Bleeding Location: Loop washer, Unit feeder, Equipment: Electric stunner for pigs Bleeding conveyor Trays for blood collection Loop washer with lowering mechanism – capacity: 100-120 pcs/h 3. Parboiling and scalding Location: Parboiling and bristling Equipment: Parboiling tub Brushing machine (star) Automatic positioning system – 80-120 pcs/h 4. Preliminary Dissection and Evacuation of Organs Location: Intestine Separator, Stomach Emptying Table Equipment: Intestine and gastric cleansing lines Gastric centrifuge Blowing system – up to 120 pcs/hour 5. Dissection Proper Location: Dissection Equipment: Upper cutting line Inspector platforms Carcass conveyor Quality marking stations Aprons, disinfection equipment 6. Cooling and Separation Location: Separation cooler Equipment: Hanger system Overhead carts Palletizing and final weighing area 7. Cleaning, Waste and Packaging Location: Packaging and Waste area Equipment: Material separator Tray packer Pallet wrapper Advantages of complete pork slaughter line: Our complete pig slaughter line is designed to process up to 120 pigs per hour with optimal hygiene and efficiency. Each processing stage -from stunning to final packaging- is fully equipped with specialized machinery tailored to industry standards. The modular system allows for scalable expansion, enabling you to adapt production to your facility’s growth. Automation and ergonomic design minimize manual labor while maximizing throughput and operator safety. High-precision equipment ensures accurate weighing, clean cuts, and reliable internal organ handling. Multiple sanitation points and tool sterilization stations guarantee food safety and compliance with EU norms. This turnkey solution integrates cutting-edge technology to streamline meat processing from live animal intake to cold storage.

Condition: used, Little used Kosme filling line with equipment made between 2020 and 2021. Ljdszunu Njpfx Aa Rorr Equipment includes: - Kosme rotary weight-filler, designed for precise filling of liquids such as edible oils, dairy, home care, or personal care products. - Kosme Flexa Sensicol rotary labelling machine. - Kosme and Atlanta S.p.A. packaging equipment.

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Lrsdpjyazywjfx Aa Ror Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Year of construction: 2021, condition: used, Lumacon automatic crate filling line Automatically feeding of 4 crates/ boxes per cycle. Lrjdev E Irgspfx Aa Rjr When the weight has been reached the conveyor belts will remove the filled crates and prepare 4 empty crates for filling. - Complete with inclined conveyor belts - Buffer belts - Weighing belts - Multiple lines available from stock (Emmeloord)

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Lodpfx Ajwu Tu Dsa Rorr Number of warp wires: max. 24

Condition: ready for operation (used), Year of construction: 2013, WP Haton Crustica mediterranean production line for artisan type of bakeries Huge number of products can be made mediterranean or classic The line can be used for baguettes with premoulder or rounder for regular products By pass for intermediate proofer Sheeting of moulding possibility Different forming stations and decorating possibilities Products: Baguettes Whole meal Ciabatta Artisan breads Batone Brioche year of build 2013 max capacity 1500 pcs/h consisting of: WP V300 dough divider 1 pocket type 1000 year of build 2013 weight range 100 - 1200 grams Voluminator WP CR59 AT conical rounder year of build 2013 hot air, heating oil on cone weight range 90-1600 gr. WP AF 2002 intermediate proofer year of build 2013 long nets retraction belt Photocell controlled infeed conveyor UV lamps PLC with touch panel WP Combi U-L year of build 2013 stainless steel curling net Lrodpju Upkdjfx Aa Rer standard version extended for pointed ends with driven top moulding belt and pressure board weight range 200 - 2000 grams WP make-up table

Condition: ready for operation (used), Schneider Electric LXM62DU60C21000 Servo drive SN:2710072445 , the article was only used for test purposes,mint condition, 100% functional, scope of delivery according to photos Ljdpfx Aspf Arxoa Rsrr

Condition: good (used), Line to produce Chinese and Japanese style chilli oils, has been producing Chinese style chilli oils for Chinese supermarkets, restaurants and cash and carry's. #chillioil Ledpfx Aorzblbsa Rsrr

Condition: used, Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013) The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines. Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations. Technical Specifications - Manufacturer: Newtec - Model: H3013MD - Type: 13-lane linear weigher with elevating belt - Serial number: 10729 - Year of manufacture: 2013 - Power supply: 400 V - Phase: 3 Ph Lrjdpfszilitex Aa Ror - Frequency: 50 Hz - Current: 9 A - Number of weighing lanes: 13 - Lane length: 730 mm (13x) - Gutter width: 95 mm (13x) - Weighing basket dimensions: 140 × 95 × 170 mm (13x) Key Features - 13 independent weighing lanes for accurate portioning - Double PCS (Portion Collection System) for increased output and higher packing speeds - Integrated elevating belt for continuous and even product feeding - Gentle handling of delicate products - Hygienic stainless steel construction - Easy access for cleaning and maintenance - Suitable for a wide variety of fresh produce applications - Proven Newtec technology known for its reliability and accuracy - Easily integrated into existing packing lines The machine is in good overall condition and is available for inspection. Additional photos, videos or a live demonstration can be provided upon request. Contact us for pricing, availability or additional information. * Manufacturer: Newtec * Model: H3013MD * Serial number: 10729 * Year of manufacture: 2013

Condition: ready for operation (used), Schneider Electric XBTGT5330 10.4" Color Touch Panel SN:085960E0240371, the article was only used for test purposes, new condition, 100% functional, scope of delivery as per photos Lrodpjpf Ar Rofx Aa Ror

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Lsdpozdq E Nefx Aa Rjrr Like a new and good price.

Condition: excellent (used), Silverson 275 LS High Sheer In Line Mixer / Homogenizer 1.5" Inlet & Outlet 3 ~ Lrodpfx Aoym Akkja Ror Removed from the stores of a pharma plant in Cork, Ireland. Device is in excellent condition.

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed. Ljdpfxexb U Txo Aa Rjrr

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. Ljdov I S D Sjpfx Aa Rerr System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: good (used), functionality: fully functional, AMF Bakery Tromp puff pastry line direct from major factory. Has been producing 2 tonnes per hour of 90-100 layer puff pastry. Other machinery available from the same line including 2 x Syspal bowl tippers (2024), 2 x Diosna WV240 A Premium wendel mixers (stainless steel model), 2 x Siloba 75 tonne flour silos, 2 x Siloba flour stations. All being removed at the end of August '26. Ledpfx Aezumifja Rsrr

Condition: used, No. 3280 Complete painting line / water-wash spray booths Used, system still completely assembled, from a furniture manufacturing company Large complete painting line, consisting of various water-wash spray booths, spraying equipment, extensive roller conveyor system as well as fresh air and exhaust air ducting Lredpfx Aaezhblno Ror Several water-wash spray booths / spray walls Spray booths partly designed as 3-sided booths Turntable available Various spraying units / pumps available Extensive roller conveyors for workpiece transport Fresh air supply / air technology available Exhaust air ducts / extraction system available Lighting above the spray booths available Dimensions of the spray booths approx. 3000 x 2000 mm / 2000 x 2000 mm / 2500 x 2000 mm Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Lodpfxjzcn Efs Aa Rsrr Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of Construction: 2015 Machine Type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser System: Dual Laser Material Processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 Upgrade / Modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, including the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R versions. Technical Data Power Connection: 3P/N/PE AC 400 V ±10% Frequency: 50 / 60 Hz Max. Current Consumption: 17 A per phase Compressed Air Supply: 7 - 8 bar Inert Gas Supply: 5 bar Cooling: Water-cooled system Machine Dimensions (approx.): 5,300 x 2,700 x 2,760 mm (L x W x H) Weight (approx.): 13,400 kg Equipment Dual Laser System Powder Handling System Material Feed Filter Units Process Gas Supply Control Cabinet Technology Operating and Control System Work Platform with Access Ladder Water-Cooled Laser System Existing Peripherals as shown in the pictures Documented Service Work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of work Operating Data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application Areas Additive Manufacturing of Metal Components Aerospace Industry Automotive Industry Tool and Mold Making Research and Development Prototype Manufacturing Industrial Series Production Scope of Delivery Concept Laser X Line 2000R BC2 Main Unit Powder Handling Components Filtration Technology Existing Peripherals as shown in the pictures Additional accessories according to the existing scope of delivery Condition Used Machine from industrial production use Laser window clean and clear Optical condition as shown in the pictures Inspection possible by appointment Due to the size and weight, professional dismantling, loading and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors in the technical data and prior sale.

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, power: 0.75 kW (1.02 HP), • 20-liter stainless steel bowl • For approx. 4 kg of flour • 3 tools • Digital control (stepless speed adjustment) • Machine body painted white • Dimensions: W = 480 D = 680 H = 1500 mm Ledpfx Aajy Rkxxj Rjrr • 400 V, 3 phases, 0.75 kW • New machine • Including special equipment: bowl scraper All prices are exclusive of VAT, ex works Syke. Available at short notice (shipping possible at buyer's expense). Advance payment required upon order. We operate exclusively in accordance with our General Terms and Conditions. Subject to prior sale, technical changes, and errors.

Condition: ready for operation (used), Lenze / Schneider Electric SX-1/21/0/2/8 m LED L1 card 51130049 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Lrjdjpf Aq Tepfx Aa Rer

Condition: used, mileage: 262,291 km, power: 132 kW (179.47 HP), first registration: 06/2009, fuel type: gasoline, gearing type: automatic, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, navigation system, = Additional Options and Accessories = - Radio/CD player Lsdpfezvqf Tsx Aa Rorr = Additional Information = Unladen weight: 1,600 kg Damage: none License plate: 11-JKL-2