Used Sipa Sipa Sfr 8 Evo Blow Moulder (2008) for sale (38,373)

Condition: excellent (used), Year of construction: 2007, PROD. CREEMERS TYPE RCD30/8 S/N CAI242107 YEAR 2007 POWER (kW) 30 OUTPUT (m3/min) 3.54 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 10385/17245 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no Chedpfxoz E Ht Nj Ahmoc DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm Codpsu Idxrjfx Ahmehc dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Cedpfx Asz Eznujhmehc Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: excellent (used), Year of construction: 2008, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP Csdsz Ezprepfx Ahmshc PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: reconditioned (used), LEADERMAC THUNDERMAC 923T SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (22 KW) - RIGHT (15 KW) - LEFT (15 KW) - RIGHT (15 KW) - LEFT (15 KW) - TOP (22 KW) - BOTTOM (22 KW), TOP (22 KW) - BOTTOM (22 KW). WORKING WIDTH: 230 (245) MM, HEIGHT: 160 MM. MAX FEED SPEED 80M/MIN (POSSIBLE TO INCREASE TO 150M/MIN) STRAIGHT JOINTERS. PROFILE JOINTERS. Codpfxez Eznbj Ahmshc CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - platen - pre-milling - strip feeder - 2 glue tanks: for granules and cartridges - hot melt glue (granules) currently in the machine - guillotine – pre-trimming of the veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge profiling (radius milling cutters) - corner rounding unit - edge sanding units – for removing excess glue - polishing units - stepless feed speed adjustment 8-18mm - workpiece thickness 6-45mm - min workpiece length 180mm - min workpiece width 600mm Chjdpfx Ahozw Dx Asmec - max thickness of veneer fed from a roll 3mm - air consumption 6-8 bar - diameter of dust extraction nozzle 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES - German production - spray system - pre-milling and corner rounding - 2 glue tanks - 4 additional milling cutters included - unpainted - original technical documentation + CE - very good condition - used veneer edging machine Net price: 49900 PLN Net price: 11605 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 7.5 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 6,000 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for multiple container purchases. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 3 units available in stock, RAL 7043 Technical description: Other models and sizes available from the Paderborn warehouse. You can view our stock on our website. Roll-off container according to DIN *Internal dimensions: 6000 x 2300 x 750 mm *Usable volume: 10.4 cbm *Unladen weight: 1945 kg Cedpez E Nctsfx Ahmehc *Base 5 mm S235 *Side walls 3 mm S235 *End wall angled upwards *All sheets and profiles continuously welded *Double-wing door with safety lock *Standard ladder according to UVV, screwed on, galvanized *8 lashing eyes in the base plate, load-bearing up to 2.5 tons *Container tested and approved according to DGUV rule 114-010 *Base-side wall connection 90° *Stringers made of U 90x55x4 mm *Stringer spacing 750 mm *Hook diameter 50 mm, S355 *Hook height 1570 mm *Top frame round tube Ø 89 mm *Mesh hook *All moving parts lubricatable *Steel guide rollers 159×6.3, length 300 mm *Warning markings according to DIN 67520 *Inside and outside zinc phosphate primer, outside painted with synthetic resin paint (80-100 μ) *Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. For further questions, please send us a message or call us.

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls grooved table Chedpfx Ahoz Hcipsmec

Year of construction: 2024, condition: new, Adhesive water blow-off for a plastic strand (filament) up to 4 mm in diameter Other dimensions up to 20 mm on request Chjdpfxeq H Sqhs Ahmjc

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI KM 1000-4300 MX *General* Year of manufacture: 2008 Control: MC5 Clamping force: 11,000 kN Quick mould change: bolt holes *Clamping unit* Mould height min/max: 600 / 1,200 mm Cedpfxjz Eu Uuj Ahmshc Platen size (H x V): 2,210 x 1,910 mm Tie bar distance (H x V): 1,550 x 1,250 mm Opening stroke: 2,000 mm Ejector stroke: 300 mm Locating ring FP/MP: Ø250 / Ø250 mm Max. mould weight FP/MP/total: 25 t / 25 t / 50 t *Injection unit 1 (main)* Screw diameter: 80 mm L/D ratio: 23 Shot volume: 1,810 cm³ Injection rate: 503 cm³/s Max. hydraulic pressure: 190 bar Max. injection pressure: 2,328 bar Screw stroke: 354 mm *Injection unit 2 (2K)* Screw diameter: 40 mm L/D ratio: 20 Shot volume: 204 cm³ Injection rate: 161 cm³/s Max. injection pressure: 1,860 bar Screw stroke: 160 mm *Peripherals* Core pulls FP/MP: 2 / 2 Sequential valve gate control: 16 zones Hot runner zones: 48

Condition: good (used), mileage: 186,970 km, power: 390 kW (530.25 HP), first registration: 05/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power mirror, retarder, spoiler, = Additional Options and Accessories = Chedpfxsxixk Ds Ahmjc - Adaptive Cruise Control - Automatic Headlights - Sunroof - Roof Spoiler - Euro 6 - Driver Airbag - High Beam Lights - Height-Adjustable Steering Wheel - Air Conditioning - Leather Steering Wheel - Air Suspension - Air Horn - Radio DAB MP3 Bluetooth 4.0 - Radio with MP3 Support - Rain Sensor - Headlight Washer System - Sleeper Cabin - Sun Visor - Auxiliary Heater = Additional Information = Technical Information Number of Cylinders: 6 Engine Displacement: 12,777 cc Front Axle: Alloy Wheels; Max. Axle Load: 8,000 kg; Steered Rear Axle: Dual Tires; Differential Lock; Alloy Wheels; Max. Axle Load: 11,500 kg Weights Unladen Weight: 8,253 kg Payload: 12,747 kg GVW: 21,000 kg Interior Upholstery: Leather Maintenance, History and Condition APK (Technical Inspection): Valid until 05/2027 Technical Condition: Good Optical Condition: Good Identification License Plate: 87-BXP-8

Condition: used, mileage: 584,000 km, power: 228 kW (309.99 HP), first registration: 05/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: mechanical, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, all wheel drive, MAN TGA 18.310 BB 4x4 all-wheel drive. Meiller 3-way tipper with steel sideboards. Chjdpjz H Ehbefx Ahmjc Dimensions: 4x40x2.42x0.70 m. Wheelbase 3.60 m. 8-speed transmission with splitter. Differential locks, central locking, radio/CD, ABS, engine brake, trailer hitch with air, electricity, and 2x oil connections, cruise control, 2x electric windows, electric mirrors, =tachograph with tachograph disc= sun visor, 2x rotating beacons, metal bumper, rear wall with window, toolbox, air filter facing upwards. Repair invoices from 2024 to 2026 totaling approximately 28,000 EUR. =====German registration===== ==Daily purchase of commercial vehicles, as well as trade-ins possible==. Price: 24,800 EUR net.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Cedszx Nxdepfx Ahmshc Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: reconditioned (used), Year of construction: 2015, Number of spindles 9 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 7,5 kW Working speed 6-36 m/min weight of the machine ca. 6500 kg Control CONTROL 100 PC PLUS SCM Topset XL, Year of Manufacture 2015; currently undergoing partial recondtionning in stock ----- Summary: - 9 spindles (including 4 x HSK 85 S) - Electronic horizontal and vertical positioning - 8,300 rpm - SCM "Set-up" - SCM "T-Set" - Includes workpiece infeed magazine Working dimensions: - Maximum working width: 240 mm - Minimum working width: 25 mm (reducible to 15 mm via installed special kit) - Maximum working height: 120 mm - Minimum working height: 10 mm (reducible to 6 mm via installed special kit) Special working cross-section equipment: Equipped with a special kit for extremely small minimum cutting dimensions of 15 x 6 mm. Infeed table and table surfaces: - Infeed table length: 2,500 mm (2.5 meters) - Surface finish: Wear-resistant, special chrome-plated finish for optimal sliding properties and minimal wear. Spindle specifications: 1. Spindle: 1st horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 6,000 rpm - Shaft: High-precision spindle, 40 mm diameter 2. Spindle: 1st vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 3. Spindle: 1st vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, tool diameter positioning 4. Spindle: 2nd vertical spindle RIGHT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount Chjdpszl Hbijfx Ahmjc - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 5. Spindle: 2nd vertical spindle LEFT: - Motor power: 11 kW - Speed: 8,300 rpm - Tool mounting: Milling spindle with HSK 85S quick-change mount - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - Tool diameter adjustment "SET UP": Electronic regulation of tool diameter, Tool diameter positioning 6. Spindle: 1st horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning - "SET UP" tool diameter adjustment: Electronic tool diameter regulation, tool diameter positioning 7. Spindle: 2nd horizontal spindle (BOTTOM): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spindle, 40 mm diameter (working length 250 mm) - Tool clamping: "T-SET" quick-clamping system for tools - Vertical positioning: Electronic vertical positioning - Horizontal positioning: Electronic horizontal positioning 8. Spindle: 2nd horizontal spindle (TOP): - Motor power: 11 kW - Speed: 8,300 rpm - Shaft: High-precision spind...

Condition: used, mileage: 584,000 km, power: 228 kW (309.99 HP), first registration: 05/2005, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, color: blue, gearing type: mechanical, loading space length: 4,400 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, all wheel drive, MAN TGA 18.310 BB 4x4 all-wheel drive. Meiller 3-way tipper with steel sideboards. Chodpjz H Eg Rjfx Ahmoc Dimensions: 4x40x2.42x0.70 m. Wheelbase 3.60 m. 8-speed gearbox with splitter. Differential locks, central locking, radio/CD, ABS, engine brake, trailer hitch with air, power, and 2x oil connections, cruise control, 2x electric windows, electric mirrors, =tachograph with tachograph disc= sun visor, 2x rotating beacon, metal bumper, rear wall with window, toolbox, air filter positioned above. Repair invoices from 2024 to 2026 totaling approximately 28,000 EUR. =====German registration===== ==Daily purchase of commercial vehicles, as well as trade-ins possible== Price: 24,800 EUR net.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 13,575 h, load capacity: 2,500 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 2,860 mm, fork carriage width: 1,120 mm, fork length: 1,350 mm, empty load weight: 4,520 kg, total length: 2,650 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 ISO class: Pin-type Mast type: Standard Transmission: Automatic Technical condition: good Front tire type: Pneumatic Front tire size: 2 x 7.00-12 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 2 x 6.00-9 Rear tire condition: 80 - 100% Chodpfx Ajz Hnuwohmsc Battery year of manufacture: 2015 Triple auxiliary hydraulics, integrated fork positioner with side shift, hydraulic fork extension (integrated), load guard, full cabin, heater, air conditioning, hydraulic fork extension (integrated), blue spot, dust protection, gas tank, lighting according to StVZO (German Road Traffic Licensing Regulations), 2 work lights at the front.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,255 h, load capacity: 1,800 kg, lifting height: 3,300 mm, free lift: 1,530 mm, fuel type: gas, mast type: duplex, construction height: 2,140 mm, fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 2,980 kg, total length: 2,350 mm, drive type: Treibgas, construction width: 1,050 mm, Internal combustion forklift Load center: 500 ISO class: FEM 2 A Mast type: Duplex Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 6.50-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 2 x 5.00-8 Rear tire condition: 80 - 100% Chedjz Hnu Dspfx Ahmoc Battery year of manufacture: 2018 Additional hydraulic circuit, integrated side shifter, cabin with heater, double pedal, 2 work lights at the front, 1 work light at the rear.

Condition: used, Year of construction: 2000, Machine description This used Partenair S.MAX40/AC refrigerated compressed air dryer, built in July 2022 by Friulair, handles a nominal flow of 366 m³/h. It runs on single-phase 230 V, 50 Hz, draws 0.82 kW and uses R407C refrigerant. Maximum working pressure is 14 bar. The DMC 35 controller shows the dew point on an LED bar. A one-piece aluminium heat exchanger and an electronic condensate drain complete the unit. Dimensions: 555 x 580 x 885 mm, weight 54 kg. Cedpez H Ny Ijfx Ahmjhc Applications This second-hand air dryer removes moisture from compressed air downstream of a screw or piston compressor of about 40 hp. It protects pneumatic tools, cylinders, valves and air networks in mechanical workshops, sheet metal shops, woodworking, packaging and paint lines (food processing with suitable filtration). Key features / Advantages Proportional capacity control keeps the dew point stable at any load. Pressure drop is low, below 150 mbar on average according to the manufacturer. The compact, light unit connects in 1.5 inch BSP and plugs into a single-phase supply. Friulair is a well-known Italian dryer manufacturer, sold in France under the Partenair brand. The 2022 build year and clean appearance make resale and installation easy. Used refrigerated air dryer for sale at All Metal, specialist in used industrial machinery. Height: 130 Length: 80 Depth: 160

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min Cjdpfxov Nrf Es Ahmehc - 28PS. - Very good condition.

Condition: used, mileage: 127,000 km, power: 353 kW (479.95 HP), first registration: 03/2016, fuel type: diesel, overall weight: 32,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro6, Equipment: crane, soot filter, Crane: ----- Retarder – Air conditioning – Steerable axle – Fifth wheel coupling and outriggers – Fassi 990, year of manufacture 2015, 8 extensions and fly jib – Front support – 8,200 crane operating hours – Manual transmission Chsdez E Ugqjpfx Ahmsc Suspension: Leaf spring – Air suspension

Year of construction: 1998, condition: used, Serial number: 65170/50671 Capacity 9000 p/h Previously produced 1500 ml Packages capacity 500-1500 ml Weight approximately 8920 kg Hours 33 448 h LxWxH 7300x3100x2800 Note! Outgoing pipework not included Chodpfx Aez Au T Uehmjc Online auction due to the full stop closure of Swedish dairy plant Emåmejeriet, manufacturer of butter cream and milk products (e.g. ALFA-LAVAL separators, RANNIE, TETRA PAK homogenizers, TETRA REX filling lines, MULTIVAC R5200 vacuum packing ELOPAK, many s/s storage tanks WEDHOLMS, logistics, carts, racks, many spare parts etc.) at Hultsfred in Sweden. The online auction opens Monday 14 September and closes Thursday 22 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 20 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Year of construction: 2011, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 5,5 kW Feed speed 7-36 m/min. Kuper SWT 23 XL-6 Four-Sided Planer ----- Machine fully functional tested! ... Working width min/max: 18 - 230 mm Csdpfxoyyqnls Ahmshc Working height min/max: 8 - 150 mm Spindle configuration: 1st Spindle - bottom ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Pulley diameter: 160 mm Adjustment: axial and radial, manual 2nd Spindle - right ----- Power: 5.5 kW Speed: 6,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 160 mm Pulley diameter: min. 110 mm - max. 200 mm Adjustment: axial and radial, manual, via mechanical digital display Adjustment: vertical 35 mm below Table 3rd Spindle - Left ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 160 mm Cutting circle diameter (125 mm): min. 110 mm - max. 200 mm Adjustment: axial and radial manual via mechanical digital display Adjustment: horizontal 18 mm to 230 mm at 125 mm diameter, vertical 35 mm below table 4th Spindle - Top ----- Power: 7.5 kW Speed: 6,200 rpm, including brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter (125 mm): min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric via mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 5. Spindle - top ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 120 mm - max. 200 mm Adjustment: axial manual and radial electric according to mechanical digital display Adjustment: vertical 8 mm to 150 mm at 125 mm diameter, axial 26 mm 6. Spindle - bottom ----- Power: 7.5 kW Speed: 7,200 rpm, incl. brake Spindle diameter: 40 mm Spindle length: 240 mm Cutting circle diameter 125 mm: min. 110 mm - max. 250 mm Adjustment: vertical manual according to mechanical digital display, axial manual Adjustment: Radial 8 to 150 mm with a 125 mm diameter Axially 35 mm Further features: ----- -Infinitely variable feed speed, 7-36 m/min, 5.5 kW motor -Electric height adjustment, 0.75 kW -Siemens touchscreen - Includes existing planer heads (Technical specifications provided by the manufacturer - no guarantee!)

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands) Cedpfx Asn Utdqjhmohc

Condition: used, Year of construction: 2008, machine/vehicle number: IntNr231684, A proven bar feeder magazine LNS, model Hydrobar Sprint 552, is for sale. Manufacturer: LNS (Switzerland) Model: Hydrobar Sprint 552 Year of construction: 2008 Working range (diameter): Ø 5 mm to Ø 52 mm Guiding principle: Hydrobaric / hydrostatic bar guidance Feed drive: Servo drive Magazine system: Bar magazine with automatic bar following Chsdpfx Ajz E Ragehmjc Application area: CNC lathes / automatic bar machines Design: Automatic bar loader / short and long material feed Bar length: approx. 3,200 Loading: Chain magazine Drive: Servo motor Control: PLC-/servo-controlled bar feed Oil capacity: approx. 80 liters, ISO 100 Subject to changes and errors in the technical data and specifications as well as prior sale.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M08L/8554, Offer Number: M08L/8554 Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO , IFO Make: MALMEDIE Type: KL34 Constr. year: 1980 diameter range: 6-14 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 280 mm shaft length under head: 220(260) mm output - pieces/min: 40-75 press power: 100 t Location: In our warehouse Cedpfx Ahowi Sxdomohc