Used Stähler Sd 150 for sale (11,070)

Condition: used, first registration: 12/2013, Year of construction: 2013, KRONE SD TAUTLINER Sliding Curtainsider Trailer EASY TARP Dkodpfxewmpibe Akher XL - Certificate for Beverages!! 2 units available!! EASY TARP - Equipment / Side Curtains: Pneumatic Quick Opening and Closing!! • ABS • 3 x Mercedes axles, air-suspended • Lift axle • Lifting/lowering system • Disc brakes • EDSCHA roof • Spare wheel carrier • Wooden floor • Beverage certificate: Vertical tarpaulin reinforcements / stiffening pockets • Interior dimensions: 13,620 x 2,500 x 2,800 mm (LxWxH) • Unladen weight: 6,236 kg • Gross vehicle weight: 36,000 kg (39,000 kg technically possible!) - German trailers! - New MOT / SP! Subject to errors and prior sale!

Condition: good (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, • Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm Djdpfx Aewgamkekhjkr • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg Euromap

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Dedpfsy Rn E Aox Akhskr Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: used, Year of construction: 2003, clamping force: 1,500 kN, Equipment: documentation/manual, Injection Moulding Machine KM 150-700/C2 Dsdpfx Aksyfm Ahehokr Clamping Unit 1. Clamping force: 1500 kN 2. Platen size (h × v): 780 × 790 mm 3. Tool opening stroke: 600 mm 4. Clearance between tie bars (h × v): 500 × 500 mm 5. Minimum mould installation height: 300 mm 6. Ejector stroke: 150 mm 7. Hot runner – number of zones used: 12 8. Control of pneumatic valve pins: 1 pc Injection Unit 1. Screw diameter: 45 mm 2. Injection pressure: 2336 bar 3. Maximum shot volume: 305 cm³ 4. Maximum shot weight (PS): 278 g 5. Cores: 2× hydraulic circuit (BAP) 6. Screw L/D ratio: 22

Condition: good (used), Year of construction: 1998, Arburg 270S 500-150 (1998) Clamping force: 50 t Distance between tie bars V: 270 mm Distance between tie bars H: 270 mm Mould height min-max: 200-550mm Type: Horizontal Drive: Hydraulic Dkodsxl Hpgjpfx Akhor • Screw diameter: 25 mm • L/D ratio: 17.5 • Max screw stroke: 90 mm • Theoretical shot volume: 44 cm³ • PS shot weight (theoretical): ≈ 40 g • Max injection pressure: up to 2500 bar • Max plasticizing rate (PS): ~6.5 kg/h • Screw torque: up to ~210 Nm • Heating capacity: ~11 kW

Condition: excellent (used), Year of construction: 2002, Arburg 320S 350-150 (2002) Clamping force: 35 ton Plate size: 455x455 mm Tie bar distance: 320x320 mm Dkodpfx Aswmqx Rskher Min-Max daylight : 575 mm Screw dia: 30mm (up to 30%glass resistant)

Condition: new, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm Dsdpfxsxabkbj Akhjkr diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The powerful centrally located motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Dkjdpfx Aeztc Twekhjr Weight (kg): 33 Cable length (m): 12 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: good (used), Year of construction: 2005, Ref. no.: 18565 Manufacturer: DEMAG Type: 150-610. System NC4 Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Dkjdpoxhfuasfx Akhsr Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1000 mm Z-axis: 2000 mm The robot system enables fully automatic part removal, conveyor transfer, and automated serial production processes. In addition, the machine comes with 2 complete spare plasticizing units / injection units (screw and barrel assemblies). The machine was in running production and operating without problems until dismantling.

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Dkodpfx Akjztc D Njhsr Weight (kg): 33 Cable length (m): 12 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER MACHINE EQUIPPED WITH AN ADDITIONAL 5L WATER TANK Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 INCLUDED: 5L WATER TANK NEW 430mm PPL 0.5 disc brush 5L TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. Dedpfx Asztcfaokhokr The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: used, axle configuration: 3 axles, first registration: 05/2021, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 70 %, color: white, Year of construction: 2022, Equipment: ABS, Tire size: 385/65R22.5 Rear axle 1: Tire tread: 70%; Reduction: single reduction Rear axle 2: Tire tread: 80%; Reduction: single reduction Rear axle 3: Tire tread: 80%; Reduction: single reduction Unladen weight: 7,200 kg Payload: 31,800 kg Gross vehicle weight: 39,000 kg Body brand: Krone Damage: none = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and meet the high standards of our industry. Details Djdozpvzaopfx Akhjkr - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - Email: - Website:

Condition: used, axle configuration: 3 axles, first registration: 03/2015, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 2,700 mm, tire size: 385/65R22.5, tire condition: 60 %, color: white, Year of construction: 2015, Equipment: ABS, tail-lift, Axle Configuration Tire Size: 385/65R22.5 Rear Axle 1: Tire Tread: 60%; Reduction: single reduction Rear Axle 2: Tire Tread: 70%; Reduction: single reduction Rear Axle 3: Tire Tread: 50%; Reduction: single reduction Weights Unladen Weight: 8,834 kg Payload: 32,166 kg GVW: 41,000 kg Functional Features Tail Lift: DHOLLANDIA 2000KG Body Manufacturer: Krone Condition Damage: None = Company Information = Heisterkamp Used Trucks BV doesn't just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are ready for immediate use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today's requirements, and comply with the high standards of our industry. Details Dodpfx Akezpvy Nohjkr - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Phone: - E-mail: - Website:

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, working width: 430 mm, overall weight: 33 kg, warranty duration: 12 months, HAKO CLEANSERV SD 43/180 SINGLE DISC SCRUBBER Manufactured in 2019 The 430mm cleaning head is equipped with a new medium-hard brush, allowing for operation on any surface. The advantages of single-disc machines powered by 230V include a simple design, low operating costs, and reliability. High maneuverability thanks to their compact size. The centrally located powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are purchasing the exact machine you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Power supply (V): 230 Working width (mm): 430 Rotation speed (rpm/min): 180 Power consumption (W): 1200 Weight (kg): 33 Cable length (m): 12 INCLUDED: NEW 430mm PPL 0.5 disc brush 5 liters of TENZI NORMAL fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. Dsdjztb Dnspfx Akhokr The large working width (430mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Dkedpfxewrh H Ne Akhsr Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction max.degree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Model: T150 Class Year of manufacture: 1993 Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, Djdeyx Nadspfx Akhskr without warranty or guarantee

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2016, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 3,000 mm, Equipment: ABS, Krone SD MegaLiner, flatbed with tarpaulin, Edscha sliding cover Internal number for inquiries: 0726620 * Condition: very good * First registration: 04/2016 * ABS * 3-axle, air-suspended * BPW axles * Edscha sliding cover * Sliding tarpaulin Loading area dimensions: Length: 13,600 mm Width: 2,470 mm Height: 3,000 mm Tires: * 1st axle: 445/45 R 19.5, 35% tread, air-suspended Dsdpfszqwyaox Akhekr * 2nd axle: 445/45 R 19.5, 35% tread, air-suspended * 3rd axle: 445/45 R 19.5, 35% tread, air-suspended ----Price: €6,900 + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, Polish, French, and…? Typographical errors, errors and prior sale are subject to change.

Condition: used, Year of construction: 2007, functionality: fully functional, NAKAMURA Model WT-150 MMY, used, year 2007 CNC turning machine Fanuc 18 iTB control Swinging diameter above the guide: 190 mm Max. turning diameter/turning length: 190 mm / 400 mm Bar capacity: 51 mm Main spindle 15/11 kW, max. speed 5,000 rpm Counter spindle 11/7.5 kW, max. speed 5,000 rpm Spindle nose: A2-5 Draw tube diameter: 52 mm (L/R) Spindle bore: 63 mm (L/R) C-axis incremental input: 0.001 degrees 2 x 12-station turrets, all stations powered 24-station indexing Tool holder dimensions, outer/inner: 20mm/25mm/32mm Speed of rotating tools: 60 – 6,000 min-1 Y-axis +/- 35 mm on the upper turret Travel X1/X2-axis: 167.5 mm Travel Z1/Z2-axis: 465 mm Rapid traverse X1/X2-axis: 16 m/min Rapid traverse Z1/Z2-axis: 40 m/min Chip conveyor type A, left Finished part discharge type G, right Coolant system Dsdpfjzqdpnox Akhokr Chip conveyor CE marking Equipment: Spindles, clamping devices & bar capacity Main spindle option: bar capacity 65 mm (left) at max. 4,500 rpm Draw tube adapter M74x1.5 to A-6 and M58x1.5 to A-5 (with coolant hole) Chuck air blow-out, outer left Coolant and air blow-out through the right spindle Axes, control & software options Y-axis (+/- 35 mm) on the upper turret Helical interpolation (thread milling) Polygon turning function (without holder) Intelligent handwheel 5 pairs of free M-functions (M-codes) Software: NC-Praktiker 2000 for Windows (DIN-ISO programming system) Automation & part discharge Finished part unloader: Type G WT 150 (L=150" mm", ∅65" mm") Profile timing belt for part gripper G (WT 150, ∅65" mm") Collection tray A ∅65 mm for material scrap discharge Coolant, filtration technology & chip disposal Chip conveyor: Hinged belt conveyor Knoll (Type 200 S-1) incl. interface Cyclone filter system: HA 180-4 incl. 2 coolant pumps Preparation for Brinkmann pumps Submersible pump TAL 401/140 51Y with TAL401 adapter plate

Year of construction: 1999, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 1999. This DEMAG Ergotech 150-610 Viva features a screw diameter of 45 mm and a maximum daylight between platens of 850 mm. It has a shot weight of 260 g and a maximum mold installation height of 250 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG Ergotech 150-610 Viva machine we have for sale. Contact us for further details. Dedpfsyxrt Tjx Akhokr

Year of construction: 2025, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 600 kg, total length: 2,425 mm, total width: 1,710 mm, total height: 2,000 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD MINI Screen Drum boosts throughput in recycling, construction, agriculture, and gardening—efficiently screening even moist/sticky materials. Its foldable, semi-mobile build enables fast setup, easy transport, and reliable performance for small to mid-scale jobs. Key features: • Stepless, reversible drum speed with quick drum change • Three drum variants + custom perforations • Integrated cleaning brush & hopper vibration motor • Adjustable screen angle and variable height • Compact, user-friendly design with single-wheel drive Dksdpfx Akow R Tkcshsr Tech highlights: Ø 800 mm (drum) · L 1.49 m · n 5–20 rpm · P 2.2 kW · 600 kg (Mesh size: Ø 4–100 mm · Voltage 400 V · Filling height 1.5–1.86 m)

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD Compact is a semi-mobile screening machine for efficient processing of soil, gravel, wood chips, waste, and recycling materials. It delivers high-precision separation, flexible operation, and reliable performance for construction sites, recycling plants, and material processing facilities. Dkjdpfx Akjw Ryl Hohjr Key Features: • Modular design with interchangeable drums & quick-change system • Adjustable screen inclination & variable drum speed (5–20 rpm) • Up to four fractions per drum segment with cleaning brush system • Optional bunker expansion for +50% input capacity • Compact, semi-mobile design with easy transport & setup Tech Highlights: Drum Ø 1.3 m · L 2.1 m · Mesh Ø6–Ø100 mm · Qmax 20–50 t/h · n 5–20 rpm · P 5.5–7.5 kW · Weight 1500 kg · Screening surface 7 m²

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 600 kg, total length: 2,425 mm, total width: 1,710 mm, total height: 2,000 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD MINI Screen Drum is ideal for recycling, construction, agriculture, and gardening—delivering reliable screening even for moist or sticky materials. Its compact, semi-mobile design ensures flexibility, easy transport, and user-friendly operation with consistent, high-quality output. Key Features: • Stepless, reversible drum rotation with quick change options • Multiple drum configurations & perforation sizes (Ø4–Ø100 mm) • Robust design with vibration motor for smooth material flow • Integrated cleaning brush & easy maintenance • Adjustable screen angle and working height for versatile use Tech Highlights: Drum L 1.49 m (usable 1.25 m) · Q max 40 t/h · n 5–20 rpm · P 2.2 kW · Weight 600 kg · Mesh Ø4 - Ø100 mm · Outer drum Ø 800 mm · Hopper opening 1600 x 760 mm Djdpfxjw R Taqe Akhokr

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2021, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 2,720 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,940 mm, color: white, Year of construction: 2021, Equipment: tail-lift, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.640 kg Carrying capacity: 33.360 kg GVW: 41.000 kg Functional Tail lift: Dhollandia DHSMR.30, slider lift, 2500 kg Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Identification Registration number: OX-75-GG Additional information Please contact Arie or Pedro for more information = Additional options and accessories = Dksdpfszn Nuqsx Akhsr - Air suspension - EBS - Lift axle - Rear doors = Remarks = Closed Box / Dhollandia / 1x Lift Axle

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 21200 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 Djdpfx Akegrzh Eehjkr 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: like new (used), Year of construction: 2020, machine/vehicle number: 218, functionality: fully functional, operating hours: 440 h, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 4 t, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, ram plate length: 1,000 mm, overall weight: 670 kg, Equipment: CE marking, documentation/manual, Professional Transmatic TM-150 Heat Press (150x100 cm) A high-quality, professional Transmatic TM-150 flatbed heat press. This is a heavy-duty, automatic electric heat press that is perfectly suited for printing large volumes of corporate clothing, sportswear, fashion items, and flags/banners. Thanks to the unique 1-drawer system with 3 open sides, you can also easily feed extremely long pieces of fabric or banners. Dedpfxsznuyre Akhokr Key specifications: Printing surface: Large format of 150 x 100 cm Best Heat Press 2021 Technology: Ideal for sublimation printing and thermal printing on textiles and laminates. Temperature control: Equipped with 3 independent thermostats for extremely accurate and consistent heat distribution across the entire platen. Operation: Digital touchscreen for precise time and temperature settings. Memory: Ability to store 4 presets. Extras: Includes daily and total piece counters, an automatic error detection system, and a blue Nomex protective mat.