Used Staehli Dlm 705 for sale (208)

Condition: excellent (used), Year of construction: 2013, operating hours: 60 h, functionality: fully functional, machine/vehicle number: NL254131163, spindle motor power: 18,500 W, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, type of input current: three-phase, total height: 2,200 mm, total length: 5,000 mm, total width: 3,050 mm, overall weight: 6,100 kg, MORI SEIKI NLX2500Y-700 Turning Cente Dimensions • Machine Depth: 3056 mm • Machine Height: 2187 mm • Machine Weight: 6140 kg Movement • Number of Axes: 5 • X-axis Travel: 260 mm • Y-axis Travel: 50 mm • Z-axis Travel: 795 mm Technical Specification • Spindle Speed: 4000 RPM • Tool Stations: 12 Additional Information • Swing over bed 920 mm • Swing over the cross-slide 742 mm • Maximum cutting diameter :366 mm • "maximum cutting length: 705 mm • Bar capacity: 80mm Knjdpfx Aozukn Esi Rea • Spindle motor power: 18. 5/15kw • Milling motor power: 5. 5kw, speed 10000 rpm • Rapid feedrates: xyz: 30 x 10 x 30m/minute • Tool setter, parts catcher, swarf conveyor • 3 jaw chuck, interlocked guards, low volt light Spindle nose: ASA 8" Tailstock: MT5 Tailstock quill diameter: 80 mm Tailstock travel: 734 mm Turret stations: 12 positions Motorized tool positions: 12 Turret tool coupling: BMT Turning tool size: 25 × 25 mm Boring bar capacity: 50 mm Maximum driven tool speed: 6,000 rpm Driven tool motor power: 5.5 / 7.5 kW C-axis0.001° indexing Additional equipment Chip conveyor

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" Knedpfx Aozp Ifwoi Rja The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: good (used), Year of construction: 1959, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device -Drive motor: AEG 0.55 kW -Load capacity: 7500 kg Kodpfx Ajznh Rwoi Rona -Roller spacing: 295 - 1010 mm, roller Ø 230 mm -Rolling speed: 0.21 to 1.25 m/min Right/Left rotation -Transmission: PIV Reimers -Control unit: with manual control, speed control via handwheel -Individual components: see photos -Transport dimensions: 1250/785/H800 mm / 705/600/H800 mm -weight: 918 kg

Condition: used, Year of construction: 1975, Manufacturer : Oskar Krieger Maschinen Model: Fondo Mat Universal 500 Year : 1975 Type: Melter / process vessel   Classification: ATEX Up/down: hydraulic unit Mixing head rotation: manual Stainless steel coil: liquid and/or steam Mixing: 705 rpm Vacuum and pressure tight lid : -1 / +1 bar Maximum temperature: 140°C diameter of filling port: DN200   Vessel : total capacity: 700L useful capacity: 500L capacity up to tank rim: 615 L pressure: -1 / 3 bar temperature: 130°C recommended drain valve size: DN40 Knjdpfx Aisx R Dbto Rja   Jacketed : capacity: 68 L pressure: 6 bar temperature: 160°C insulation thickness: 45mm   Weight: 1520 kg Can be combined with the following equipment: / Technical documentation available.    

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Kedpfjwgm Hkox Ai Rona Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Year of construction: 2025, condition: used, functionality: fully functional, This is a glasswashing machine from the manufacturer Hobart, model GXCROI-10C, manufactured in 2025. This compact professional dishwasher is equipped with an integrated osmosis system and a base unit for empty racks or detergent, as well as suction lances for monitoring the fill level. The glasswashing machine has been inspected in our in-house workshop and is fully functional and in near-new condition. The list price of the machine in this configuration is €13,285.16 (gross). You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs. High-quality brand-name equipment at fair prices. Professional refurbishment/inspection & expert cleaning. Checked & fully functional – or your money back. Flexible shipping or self-collection options. Competent advice – before and after the purchase. Provision of operating instructions, connection diagrams & spare parts. Testing according to DGUV V3 Technical data: External dimensions WxDxH: 600 x 600 x 1260 mm Electrical connection: 400V / 50 Hz, 6.8 kW Year of manufacture: 2025 60/90/120 sec. and special programs Water consumption: 2L/rack Tank capacity: 60 liters Rack size: 500 x 500 mm Loading height: 305 mm Condition: Used, inspected and fully functional Base model: Front-loading machine Theoretical capacity up to 60 racks/h, 2,160 glasses/h 7 automatic programs: short, standard, cold rinse, hygiene, basic cleaning, intensive program, E-Save Automatic self-cleaning program Wash pump with soft start Integrated WLAN module Completely ready for connection: inlet and outlet hoses, connection cable (400 V connection), liquid detergent dosing pump, rinse aid dosing pump, rinse pump, drain pump, backflow preventer Kedpfxsy Uvuao Ai Rona Multi-phasing: Machine can be switched from 400 V to 230 V on-site Shock-absorbing door with self-closing mechanism Tank, sump, cladding made of CrNi steel 1.4301 Universal glass rack 00-378814-000: 500 x 530 mm With base unit: 435 mm high, with removable door, CrNi steel 18/9, space for 2 empty racks or detergent Customer benefits: Compact design, installation height of only 705 mm / with integrated osmosis only 820 mm Self-cleaning washing system VISOTRONIC-TOUCH control SmartConnect app SENSO-ACTIVE resource management CLIP-IN washing and rinsing system Intelligent data storage USB interface GENIUS-X2 fine filter system Cold rinse Intensive program Screen insert control Optional fill level indicator Hygiene program in combination with the Hygiene Tab INTENSIVE Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like to request advice or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2012, Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Kodpfek Abfuox Ai Rena Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Knedpsv R E Rdjfx Ai Rsa Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: used, Year of construction: 2011, lifting height: 31,600 mm, fuel type: diesel, color: red, Equipment: all wheel drive, Drivetrain Drive: Wheel Knjdpfxszmg Rts Ai Rea Weights Empty weight: 31.200 kg Functional Lifting capacity: 1.000 kg Working height: 3.360 cm Dimensions of cargo space: 705 x 301 x 287 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: G-320DL30 4WDS/N Year of build: 2011 Condition: Used Data: Max. working height: 33,63 m Max. platform height: 31,63 m Lifting capacity: 1000 kg Lifting capacity on extension: 1000 kg Drive type: Diesel Platform dimensions LxW: 6,56 x 2,68 m Platform lenght pushed out: 9,56 m Total dimensions LxW: 7,05 x 3,01 m Transport height with / without railing: 3,62 / 2,87 m Movable up to working height: 33,63 m Ground clearance: 0,21 m Only indoor using: no Own weight: 31.200 kg Special features: white tires, automatic support system, 230V connection on platform, hydraulic supports, 4-wheel steering, all-wheel drive, attachment points for fall protection systems (PPE) available. Information: Function partially given, 2 wheels need to be replaced, PLC control + circuit board defective. Location: 41468 Neuss immediately available

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Kedpfx Ast Akirji Rona Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Kjdpjyxa Dtsfx Ai Rena Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm throat 400 mm bore stroke 250 mm taper MK 4 MK table-size 705 x 580 mm feeds 0,1 - 0,2 - 0,3 - 0,4 mm/U turning speeds 60 - 1205 U/min total power requirement 4,0 KW weight of the machine ca. 0,85 t Kodpfx Aiszlkv Ds Rsna dimensions 1,2 x 0,8 x 2,55 m Column drilling machine with: - Power feed - Left/right rotation - Coolant pump - Machine light

Condition: used, mileage: 99,662 km, power: 74 kW (100.61 HP), fuel type: gasoline, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,060 mm, first registration: 05/2021, fuel tank capacity: 60 l, CO₂ emissions: 163 g/km, emission class: euro6, color: white, number of seats: 2, number of previous owners: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Technical information Torque: 170 Nm Number of cylinders: 3 Engine capacity: 999 cc Transmission: 6 gears, Manual gearbox Measures length/height: L2H1 Dimensions (LxBxH): 496 x 185 x 186 cm Weights Empty weight: 1.490 kg Carrying capacity: 705 kg GVW: 2.195 kg Interior Interior: black Consumption Average fuel consumption: 5,9 l/100km (48 MPG) Urban fuel consumption: 6,3 l/100km (45 MPG) Extra urban fuel consumption: 5,3 l/100km (53 MPG) Maintenance, history and condition Service history: Present APK (MOT): tested until 05/2027 Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Automatic dipped headlights - Car kit - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front central armrest - Front fog lights - Heated door mirrors - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Partition - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Reversing camera - Sliding side door left - Sliding side door right - Start / stop system Knjdpfx Aszk Hbtei Rea - Telephone enabled with Bluetooth - Third brake light

Condition: new, Year of construction: 2025, Motorized planer table with two speeds Numerical display for working height Planer table made of gray cast iron The planer table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the planer table Standard with noise and chip protection curtain at the workpiece infeed and outfeed Roller clamping pressure adjustable Front infeed roller with helical gears Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa planing cutter block Planing cutter change in seconds When the machine starts, the planing cutters are automatically tensioned by centrifugal force - self-locking The cutter overhang adjusts automatically without the use of setting gauges Work table The work table is mounted on four large trapezoidal thread spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position is maintained perfectly even without locking Helically geared steel infeed rollers for consistent and even wood feed Second, rubberized feed roller at the outfeed Solid anti-recoil guards prevent workpiece recoil A 4-cutter block ensures an optimal planing result Dimensions and weights Length approx. 1170 mm Width/Depth approx. 1003 mm Weight approx. 660 kg Dust extraction connection Dust extraction nozzle diameter (planer table) 150 mm Drive power Main motor 7.5 kW Installation information Space requirement (length) 1170 mm Knodpfxjd Hx E Ie Ai Rsa Space requirement (width/depth) 1003 mm Space requirement (height) 1197 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thickness Planer table length 520 mm Planer table width 1000 mm Working height min. 3.5 mm Working height max. 250 mm Working length min. 210 mm Maximum chip removal 8 mm Electrical data Connection voltage 400 V Planing cutter block Type TERSA Diameter 120 mm Number of planing cutters 4 pcs Speed 4500 min⁻¹ Planing width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: as good as new (ex-display), Year of construction: 2026, SRF Master, illustration on the left 2 m extraction arm Application area Low amounts of smoke/dust Occasional use Benefits Requires little readjustment of the extraction hood More flexible due to the additional hose connection at the rear Features Safe operation thanks to filter monitoring Extraction hood can be rotated and swiveled 360 degrees Sliding handle and cable holder Process: 3-stage Filter type: Disposable filter Filter area: approx. 12 m² Separation rate: > 99% Filter material: Glass fiber fleece Welding fume separation class: W3 Additional filters: Two pre-filters Basic data Extraction capacity: max. 950 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 2 m Diameter of suction connection: Ø 150 mm Power connection: 230 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 72 dB(A) Dimensions (W x D x H): 705 x 655 x 900 mm Weight: approx. 71 kg Knedpfxsdqzbrj Ai Roa

Condition: used, Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 3,000 kg, total height: 3,400 mm, total width: 2,100 mm, total length: 3,425 mm, table width: 850 mm, quill stroke: 710 mm, type of input current: three-phase, distance table to quill: 250 mm, table length: 1,150 mm, warranty duration: 6 months, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 15 m/min, input voltage: 400 V, overall weight: 7,500 kg, year of last overhaul: 2026, table load: 3,000 kg, input frequency: 50 Hz, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 15 m/min, Equipment: documentation/manual, EDM314MF30 + AWEX50/5 MF30 control panel Year of manufacture: 2020 Operating hours: 4800 h Overhauled Travel ranges XxYxZ: 905/1020 x 705 x 455 mm Work table: 1150 x 850 mm (steel table with T-slots) Work tank: 1200 x 900 mm Filling level of work tank: 500 mm Electrode weight, max.: 50/500 kg Workpiece weight: 3000 kg Machine weight: 7500 kg Machine dimensions (W x D x H): 2100 x 3425 x 3450 mm Equipment: Color: Light/Teal gray Tool changer: 30-position, in-machine Automation: AWEX50/5 50 electrode positions 5 pallets UPC 320x320 Cartridge filter system Knedjyt Ewgopfx Ai Rea Quick-change chuck EROWA/3R-Macro C-axis: 100 rpm, direct measurement 0.0001 degrees Holding brake in C-axis CO2 extinguishing system K&B Fire protection flap Smoke extraction with activated carbon filter Cooling unit integrated in the machine Manual control panel Automatic tank refill Erosion generator: 60 A Option with booster stage for 120 A erosion power Transportation On-site commissioning Training

Condition: used, functionality: unexamined, machine/vehicle number: 134568, Year of construction: 2014, operating hours: 21,573 h, load capacity: 16,000 kg, lifting height: 8,500 mm, load center: 2,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,920 mm, motor manufacturer: Scania, gearing type: hydrostat, tire condition: 20 %, front tire type: pneumatic tires (air-filled), empty load weight: 50,500 kg, total height: 4,920 mm, total length: 6,910 mm, total width: 3,710 mm, color: red, Equipment: CE marking, adjustable boom, air conditioning, cabin, centralized greasing system, front guard, gripper hydraulics, lighting, Hello, Kedpjzk Izuofx Ai Rjna Due to the cessation of my business operations, I would like to offer a machine in good condition, requiring only minor repairs, as it has not been used for the past two years.

Condition: repair required (used), with two-sided cutting width adjustment, as spare parts carrier, frame width 705 mm, stroke 600 mm Ksdpjmqkr Dofx Ai Rjna

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide rail, crossed roller guide Kjdolb Iwbjpfx Ai Rena -Manufacturer: Schneeberger, Cross roller guide type 9700 -Hole spacing: 100 mm M8 -Quantity: 4 pieces -Price: per piece -Dimensions: 705/22/H45 mm -Weight: 4.5 kg/pc.

Year of construction: 1964, condition: used, machine/vehicle number: 38792, Milling machine, universal milling machine, tool milling machine, drilling and milling machine -clamping table: 705 x 310 mm -Device table: rotatable/tiltable/swiveling Kedjfgrpnspfx Ai Rona -X/Y/Z travel: 550/340/420 mm -Spindle mount: SK40 -Speeds: from 46 to 2110 rpm -Feed: 12 to 254 mm/min -Pinole stroke: 80 mm -Rapid traverse: mm/min -Coolant device: -Dimensions: 1620/1700/H1810 mm -Weight: 1768 kg

Condition: used, windshield, windshield Knedpfsiyzptsx Ai Rsa -Manufacturer: Scania, windshield windshield -Order No.: -Dimension: 1660/705/ thickness 7 mm -Weight: 16kg -Transport dimension: 1660/785/H390 mm

Condition: good (used), Year of construction: 1988, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm Ksdjwrb Sropfx Ai Rona -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive -Pneumatic linear drive Knedpfx Aed Sub Aoi Rja -Festo type: DGO -..... -Stroke: 490 mm -Shaft: Ø 22 mm -Dimensions: 42/42/705 mm -Weight: 1.05 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor Knodpfxofnln De Ai Rsa -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

Year of construction: 1963, condition: used, Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine -Projection: 645 mm -Taper mount: MK3 -Speeds: 95 - 1050 rpm -Columns: Ø 190 mm -Spindle stroke: 195 mm -automatic feed: 0.05/0.10/0.20 mm/rev -Clamping table: 735 x 520 mm -Dimensions: 1350/705/H2170 mm Knodsdvnbxspfx Ai Rja -Weight: 1100 kg