Used Ter Hart Eccentric Press for sale (30,733)

Condition: good (used), DIGÉP SD63 Eccentric press, 63 ton eccentric press for sale manufacturer: DIGÉP type: SD63 year of manufacture: 1975 Bedpfx Asiukrrsqwsll – pressing force: 63 t – slider stroke: 10-110 mm – slider adjustment: 70 mm – stroke rate max: 60 1/min. - table size: 740x560 – main motor power: 5.5kw 400V 50Hz – total weight: approx. 4200 kg

Condition: good (used), Year of construction: 1965, machine/vehicle number: 951065, - pressing force: 22 t - nosing: 175 mm - stroke: 120 1/min - tappet adjustment: 50 mm - stroke adjustment: 8-80 mm - no accident prevention regulation - weight: ca. 2.000 kg Bodpfx Ajd Atnvoqwoll

Condition: used, Single-column – Eccentric press RICHTER Type PEKRS 80 Year of manufacture 1970 – Overhauled in 2024 Clamping force 80 tons Reach 350 mm Table size 900 x 650 mm Through-hole in the mounting table Ø 200 mm Ram area 700 x 500 mm Stroke rate 70 strokes/min Stroke adjustment 6 – 100 mm Ram adjustment 85 mm Installation height max. 400 mm Arbor hole Ø 50 mm Table height above floor 810 mm Motor power 8 kW Power connection 400 volts, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION XSz 32 - Pneumatic ram balancing cylinders - Overload protection with shear plate in the ram - Grease central lubrication with hand pump Space requirement L x W x H 1800 x 1250 x 2830 mm Weight 5.7 tons Very good condition Technically overhauled and converted to the latest safety standards with new electrical system Control system rebuilt in 05/2024 – suitable for manual feeding operations – in accordance with DGUV Information 209-030 Press Inspection and Machinery Directive 2006/42/EC Low Voltage Directive 2014/35/EU EN ISO 16092-1: Safety of machinery - Presses - Part 1: General safety requirements EN ISO 16092-2: Machinery - Safety of presses - Part 2: Mechanical presses - Control system with plain text error messages and diagnostic screen for quick fault localization - New electrical cabinet, mounted on the side of the machine - Completely based on SIEMENS, with S7-1200 PROFIsafe PLC and 7" TFT touch display - Two-hand control panel with emergency stop and interlocking - Electric foot switch - Cam mechanism with run-on monitoring - Stroke release via press safety valve HERION XSz 32 with pneumatic pressure gauge Bledpfoi Db Ibox Aqwjl - Rewiring of the machine - Updated operating manual The machine is equipped with 6 operating modes: 1 = Setup 2 = Single stroke, two-hand 3 = Single stroke, foot 4 = Continuous operation, foot 5 = Automatic continuous operation 6 = Reverse operation

Condition: used, Year of construction: 1976, pressure 100 t throat 315 mm stroke 8 - 112 mm table surface area 725 x 570 mm ram surface 410 x 315 mm ram adjustment 80 mm Bledougnpijpfx Aqwel no. of strokes 55 / 82 Hub/min tool shank hole (depth x diameter) 85 x 50 mm dayligth 355 mm total power requirement 7,5 kW weight of the machine ca. 6 t dimensions of machine L x W x H 2,00 x 1,00 x 2,87 m

Condition: excellent (used), Eccentric press Inventory no. 3919 Manufacturer: Weingarten Type: XOR 2 Press force: 75 tons * Stroke adjustment: 10 to 100 mm * Adjustable ram: 60 mm * Installation height: 360 mm * Overhang: 270 mm * Table area: 630 x 600 mm * Foot-operated * Machine weight: approx. 4500 kg In very good condition. Bjdpfxszpbvio Aqwjll

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Blodpev Uraajfx Aqwol Distance between columns 218 mm Ram stroke 60 mm Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: good (used), Year of construction: 1983, Rotary indexing table with 12 stations Automatic ejector Three pressing stages Pressing force: 1,000 kN Stroke: 12-120 mm Stroke rate: 30-60 strokes/min Bsdslp Nqhepfx Aqwoll Ram adjustment: 80 mm Total weight: 9,500 kg

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Bljdpek S Htxsfx Aqwol Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Machines for export from company closure Stock No. 62506 = RAPID Type DGL 5000 / 500 double mitre saw = Weight approx. 1,200 kg = Special price EUR 1,800 Blsdpfx Ajy Erzdeqwol Stock No. 54183 = MÜLLER hydraulic press 10 ton, without hydraulic pump = Weight approx. 1,200 kg = Special price EUR 1,000 Stock No. 57780 = MÜLLER hydraulic press Type HEP 40 = Weight approx. 2,200 kg = Special price EUR 1,900 Hydraulic press – separate hydraulic power unit = Weight approx. 3,000 kg Stock No. 60507 = WEBO drill with 4 spindles = Weight approx. 1,900 kg = EUR 1,600 Stock No. 57592 = ALZMETALL drill with 2 spindles = Weight approx. 1,700 kg = EUR 1,200 Stock No. 60699 = WEBO column-type drill MK5 = Weight 1,600 kg = Special price EUR 1,600 Stock No. 60177 = WEBO radial drilling machine Type R4bR = Weight approx. 2,800 kg = Special price EUR 1,900 Stock No. 57432 = GILDEMEISTER Type GD 160 = Weight approx. 4,000 kg = Special price EUR 1,900 --- Many more machines in stock, available for immediate export. For example: 10 units welding machines, CLOOS, ESS etc. 2x HITACHI SEIKI CNC lathes

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,180 mm, total width: 1,600 mm, total height: 2,310 mm, Special Offer – 5% Discount Available! 40T Open Back Eccentric Press The 40T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls Bledsytdl Ajpfx Aqwjl * High productivity * CE certified Technical Specifications * Press force: 40 t * Stroke under nominal load: 6 mm * Slide stroke: 120 mm * Strokes: 55 strokes/min * Maximum die height: 220 mm * Die height adjustment: 80 mm * Throat depth: 260 mm * Working table: 710 × 480 mm * Table thickness: 80 mm * Table hole diameter: Ø180 mm * Bed opening: Ø200 × 150 × 300 mm * Slide surface: 320 × 270 mm * Maximum frame inclination: 25° * Distance between columns: 300 mm * Punch hole diameter: Ø50 mm * Punch hole depth: 70 mm * Motor power: 4 kW * Machine dimensions: 1600 × 1180 × 2310 mm * Machine weight: 3580 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany Blsdey D Abfjpfx Aqwjl

Condition: used, Year of construction: 2021, Used metal stamping press ALP-25J (25T, 2021) for sale. Condition: used, good condition. Can be tested. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 Compact and reliable mechanical eccentric stamping press designed for forming, cutting, blanking, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 65 mm Stroke frequency: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Slider working area: 560 × 370 mm Table (bolster) area: 250 × 220 mm Country of origin: China Blodpfx Aszktuasqwel Weight: 800 kg Application: The ALP-25J press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in the production of tools, metal structures, and automotive parts; working with thin and medium-thickness sheet metal. If you have any further questions, please do not hesitate to ask.

Condition: used, Year of construction: 1980, Technical details: Bljdpou Nfhdofx Aqwsl pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: good (used), Year of construction: 1998, power: 3 kW (4.08 HP), pressing force: 50 t, table width: 800 mm, table length: 500 mm, table height: 830 mm, throat depth: 250 mm, total length: 1,300 mm, total width: 1,100 mm, total height: 2,400 mm, overall weight: 4,100 kg, compressed air connection: 6 bar, drop-through hole in table: 170 mm, installation height: 450 mm, ram adjustment: 180 mm, stroke adjustment: 102 mm, Eccentric press, pressing force 50 t, table size 800 x 500 mm, throat depth 250 mm, adjustable stroke 8 - 110 mm, 60 strokes/min, ram adjustment 180 mm, motor 3 kW, dimensions 1100x1300x2400 mm, weight approx. 4100 kg Bledpfsyly Evex Aqwol

Condition: excellent (used), Year of construction: 2016, Specifications Manufacturer: IMV Model: DM125 Year: 2016 Condition: Used Stock number: 0396 Ram force: 1,250 t Number of press points: 2 Bsdpfxoyw Uf As Aqwjll Drive: Eccentric with stroke adjustment Ram stroke: 250–400 mm Strokes/min: 5–35 Vertical daylight below bolster, CBRA: 1,150 mm Table dimensions: 4,500 x 2,000 mm Ram dimensions: 4,500 x 2,000 mm Side column window: 2,600 mm Max. front column window: 4,900 mm Transfer cart: 2 units present Main motor power: 290 kW Press weight: 310,000 kg

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t Bjdpfx Aotrhf Aoqwsll dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Blodpfezkmi Dox Aqwel Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 65/2/158/02, functionality: fully functional, pressing force: 65 t, stroke length: 120 mm, table length: 580 mm, throat depth: 280 mm, total width: 820 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] Blsdpfx Aoxqn Unjqwjl MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Condition: good (used), Pressing force: approx. 10 tons Table size: 500 x 300 mm (W x D) Pedal size: 110 x 105 mm (W x D) Installation height: approx. 150 mm (large stroke at the top) Stroke: 5...29 mm Bledpfx Aqovnrhwowjl Pedal adjustment: 25 mm Other • Rotating wedge coupling • Foot release • Control and protective screen as new, only used very little • Without table

Condition: excellent (used), Year of construction: 1979, power: 38 kW (51.67 HP), stroke length: 400 mm, table width: 1,320 mm, table length: 1,000 mm, total height: 6,300 mm, distance between stands: 1,000 mm, ram adjustment: 200 mm, Trimming press ERFURT type PKZ 400/1000 Capacity, ton 400 Bledpfx Ajlnlpxsqwel Stroke 400 mm Table size (left to right) 1000 mm Table size (front to back) 1320 mm Ram (left to right) 800 mm Ram (front to back) 1060 mm Ram adjustment 200 mm Strokes 18 min-1 Shut height 685 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Driving power overall 38 kW Required space 2550 x 2700 mm Height of machine above floor 6300 mm Weight without bottom ejector 33,8 t Total weight 38,5 t

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm Blodpjyatx Esfx Aqwjl - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized tappet height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reverse switch (return) - Electric stroke counter - Electric preselection counter - Cam switch mechanism The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and completely technically inspected - New paintwork (also available according to customer specifications) - New seals - New control cabinet with touchscreen, including wiring of the machine - Current press inspection

Condition: used, Year of construction: 1983, pressure 100 t Bjdpjxh Swhofx Aqwoll throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: A5137, functionality: fully functional, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Bodpfx Aewb A Dzsqwoll Variable stroke: 14 - 150 mm Ram adjustment: 80 mm Installation height: 420 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Special Offer – 5% Discount Available! Bedpeytcvgefx Aqwell 25T Open Back Eccentric Press The 25T Open Back Eccentric Press is a professional industrial machine designed for punching, stamping, bending and forming metal components. Its rigid open back frame provides excellent accessibility to the working area while ensuring high stability, precision and operator comfort. The machine features a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems for reliable, efficient and safe operation. Its robust construction makes it suitable for continuous industrial production. Main Features * Open back frame design * Heavy-duty steel construction * Fixed working table * Transversely mounted crankshaft * Dry pneumatic friction clutch * Adjustable slide stroke * Slide balancing device * Integrated safety valves * Manual controls * High productivity * CE certified Technical Specifications * Press force: 25 t * Stroke under nominal load: 3 mm * Slide stroke: 10–110 mm * Strokes: 80–120 strokes/min * Maximum die height: 250 mm * Die height adjustment: 50 mm * Throat depth: 210 mm * Distance between frame columns: 450 mm * Working table: 700 × 400 mm * Table thickness: 80 mm * Outer table hole diameter: Ø170 mm * Table hole depth: 20 mm * Inner table hole diameter: Ø150 mm * Slide surface: 360 × 300 mm * Punch hole diameter: Ø40 mm * Punch hole depth: 60 mm * Motor power: 3 kW * Machine dimensions: 1460 × 950 × 2380 mm * Machine weight: 3100 kg Standard Equipment * Light curtains * Mechanical safety guards * Lower table ejector * CE Declaration of Conformity * Technical documentation Applications * Punching * Stamping * Bending * Forming * Sheet metal production * Metal fabrication workshops * Industrial manufacturing Transport and Delivery The machine is supplied brand new and includes a 12-month warranty, warranty service and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos or a personalized quotation.

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode Blodpfx Asfx Hv Hoqwol selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories