Used Teupen Leo 36 for sale (4,818)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm 352 mm 145 kg Cedpoyrhtnsfx Aiporc 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1695 € 12 mm 19 mm Weldon 0.45 kW 316 mm 235 mm 328 mm 115 kg 12 mm 36 mm Crodpfx Asyrhqtjipec 50 mm 70 mm 260 U/min 6 mm The PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters. The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits. Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate current condition of the drill and give safety information. Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red) Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety information • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • Tilt sensor stops the motor if machine breaks away • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Energy Saving Base(ESB) uses only 50% of its power when motor is not running • innovative smart magnet with reduced weight Standard shipping set: • Cordless drilling machine • Plastic box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Cooling system • 4 mm hex wrench with a handle • Operator’s Manual OPTIONAL EQUIPMENT (PRICES ON REQUEST): Battery charger Pipe attachment Pressure cooling system Vacuum pad Vaccum pump Compressed air ejecto

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives Csdpfx Aioyrhppsporc additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: good (used), Roller glue application machine, laminating machine, laminating system, laminating system, layering machine Csdpjirnwbsfx Aipjrc -Manufacturer: Hymmen, glue application machine, layer machine type 36 -Working width: 1300 mm -Roll diameter: Ø175 x 1300 mm / Ø235 x 1300 mm / Ø85 x 1300 mm -Individual components: see photos -Dimensions: 2230/1100/H1410 mm -Weight: 1260 kg

Condition: used, maximum load weight: 23,520 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 04/2017, Year of construction: 2017, Equipment: ABS, Manufacturer De Buf Model BM 12-36-2SPR m/ belt Theam TSR15 Year 2017 Condition Very good Serial Number YA9BM36217G222919 Ref. nr. 7810 Reg. date: 10-04-2017 Drum brake: ? ABS: ? Axles: SAF Cedpfswwy Nyox Aiporc Suspension: Air Tire Size: 425/65R22.5 Cover% left 40 - 40% Toolbox: ? Total weight: 36000 kg. Net weight: 12480 kg. Load capacity 23520 kg. Remote control: ?

Condition: new, maximum load weight: 30,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,430 mm, loading space height: 2,400 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Kempf SKM 36/3 AK Aluminium Tipper 55 m³ Washing unit optionally available, see photos, surcharge €8,500 net Type: Kränzle Starlet 4 • Loading length: 9,500 mm Cjdpfx Ajw Umrneiperc • Loading width: 2,430 mm • Box height: 2,400 mm • Box volume: 55 m³ • SAF axles with disc brakes • 1st axle liftable • Air tanks: aluminium • Aluminium folding support legs • 2 plastic toolboxes • Aluminium ladder, 4,000 mm long • Work platform with access • Foldable underrun protection • LED lighting • 2 x work lights • Cargo area lighting • Tyres: 385/65 R22.5 ALCOA aluminium rims • Wabco brake system • Hyva tipping cylinder • Load pressure gauge • ECAS system • 20° front wall • Floor thickness: 7 mm • Grain slider • Dust bag • Shovel and broom holder • Roof tarpaulin • Water tank, 30 litres • Chassis RAL 9005 deep black • Body RAL 9006 white aluminium For further information, we are happy to assist you.

Condition: ready for operation (used), Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible. Crjdpfjyfv I Tex Aipec

Condition: excellent (used), Year of construction: 2017, Ref: 11039 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette AutoCollator Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Crodpsxyxttofx Aipoc Format: Up to 36’’ (915mm)

Condition: excellent (used), Year of construction: 2017, Ref: 11038 . 2017 Rollem 36” Jetslit + 30” Rollaway and Cassette Delivery High volume print finishing system to maximizes finishing productivity for large volume producers For greeting cards, photo books, direct mail, postcards, invoices, business cards, game cards and much more. Features: This flexible system takes full press sheets and converts them to finished products in one step, eliminating the need for guillotine cutting, excess manpower and paper movement. 100% accuracy of finished products is a key feature of the Jetslit. Performs multiple print finishing steps with one system Bi-directional slitting, cutting, creasing and perforating in one machine Ideal for high volume production Multiple-up layouts maximize press sheet Decreases excess labour costs Eliminates touch points and paper movement Fully integrates with press via DFA communication system Accepts sheets in-line from press or operates in a stand-alone near-line configuration Process: The system takes full printed sheets with multiple images and converts each sheet in two directions, as shown below: 1. Full sheets are fed into the JetSlit registration guide for perfect alignment. 2. The sheets are completely slit on the extreme edges and timed slit in-between with Rollem's patented strike-slit feature. Credpfx Aoxyxr Njipsc 3. The sheets are turned 90 degrees and re-registered. 4. Final slits are made, removing the notched portions and leaving the final pieces. Specification: Speed: Up to 6,000 cut product sheets per hour Format: Up to 36’’ (915mm)

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS Cedpfx Aiexp Na Njpsrc HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES

Year of construction: 1980, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 6mm. Crjdjmgcnlopfx Aipec

Year of construction: 2000, condition: ready for operation (used), Rotational speed: 900/min, connected load: 2.7kVA, weight: 3.98t, with documentation. Crodsiy D Agjpfx Aipsc

Condition: new, This listing is for a Leosmak LEO-004 Compact Freeze Dryer sold through We are stock holders in UK Price before VAT - £3,600 The Leosmak LEO-004 Compact Freeze Dryer offers a cost-effective way to preserve food, helping you save up to 30% on grocery bills by reducing waste. Whether you're preparing meals for camping trips, emergencies, or simply extending the shelf life of seasonal produce, this freeze dryer meets all your culinary needs. What’s Included - LEO-007 Freeze Dryer. - 6 trays. - Drainage hose with connector. - 1 litre of oil. - Spare temperature sensor. - Leosmak bag. - Operating manual. - Catalogue. Features - 6 shelves, 6 trays, 0,7 m2 shelf area. - 20 or 40mm trays available . - Freeze dry 7KG fresh food per batch. - GN 2/3 Stainless steel trays. - Freezing and heating range: -45°C - +70°C. - Short Freeze Drying Time: Our advanced technology ensures efficient and rapid freeze drying, preserving the quality of your food. - 100% Stainless Steel Construction: Durable, easy to clean, and designed to withstand rigorous use while maintaining hygiene. - Washable Chamber: No electrical components in the chamber means easy maintenance and enhanced safety. - Plug and Play Operation: Simple setup allows you to start freeze drying immediately, even in a home environment. - Low Noise Operation: Designed for quiet performance, making it suitable for home use without disturbing your daily activities. - Included Vacuum Pump: Comes with a high-quality vacuum pump to facilitate the freeze drying process. - Fully Automatic Process: Set it and forget it! Enjoy hassle-free operation with minimal supervision. - Wi-Fi Monitoring: Control and monitor your freeze dryer remotely via our Android or iOS application. Dimensions - Freeze dryer exterior dimensions: 550mm W x 800mm D x 770mm H - Perfect for counter top, cart, or table. Weight - 70KG. Power Crsdpfx Ajxx Aipsipjc - Required power supply: 220V, 2,5 kW. - Energy consumption: ~7,5. - kWh/1kg/standard batch. Shipping Info - Shipping dimensions: 90x80x105 cm. - Gross Shipping weight: 117 kg. Maintenance - Replace vacuum pump oil every 20 to 30 batches (takes about two minutes) Clean freeze dryer as needed. Warranty - Min. 24 months, extendable warranty.

Condition: excellent (used), Year of construction: 2014, 36 m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Rack length approx. 36,000 mm Upright height: approx. 6,000 mm Upright depth: approx. 1,100 mm Upright type: PLFB 16P Clear bay width: 3,600 mm Number of bays: 10 Number of levels: 4 (6 beams + floor storage) Beam type: PNB 0436 Max. pallet weight: 1,000 kg Permissible bay load: 4,000 kg Permissible bay load: 20,000 kg Upright finish: blue painted (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 11 x uprights 6,000 x 1,100 mm, bay load 20,000 kg, blue 60 x beams 3,600 mm incl. Safety pins, load capacity 4000 kg, orange Financing through our bank is also possible. komplett-konzept.leasingo.de Cedpfeyb Sb Isx Aipsrc Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, axle configuration: > 3 axles, first registration: 04/2009, color: other, Year of construction: 2009, Empty weight: 12.800 kg Carrying capacity: 41.200 kg GVW: 54.000 kg Axle 1: left 9 mm right 6 mm Axle 2: left 9 mm right 10 mm Axle 3: left 5 5mm right 5 11 mm Crsdsud Rc Hspfx Aipec

Condition: excellent (used), Year of construction: 2014, 36 m Stow Pal Rack Pallet Rack Manufacturer: Stow Type: Pal Rack System Rack length approx. 36,000 mm Upright height: approx. 6,000 mm Upright depth: approx. 1,100 mm Upright type: PLFB 16P Clear bay width: 3,600 mm Number of bays: 10 Number of levels: 6 Beam type: PNB 0436 Max. pallet weight: 1,000 kg Permissible bay load: 4,000 kg Permissible bay load: 20,000 kg Upright finish: blue painted (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 11 x uprights 6,000 x 1,100 mm, bay load 20,000 kg, blue 120 x beams 3,600 mm incl. locking pins, bay load 4000 kg orange Financing through our bank is also possible. Crsdpfoya Dqfjx Aipec komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: new, Year of construction: 2026, A set of transport rollers consisting of a WL18 running platform and a WF18 transport chassis. The maximum lifting capacity of the set is 36 tons. Description Transport rollers make it easy and safe to transport heavy items. Thanks to the use of polyurethane tread rollers, the transported machine and floor are not damaged. Technical parameters WL18 ROLLERS SIZE 85x85 mm NUMBER OF ROLLERS 16 LOADING CAPACITY 18000 kg LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT Ø170 mm SUPPORT POINTS 1 LENGHT OF SHAFT 1080 mm TURNING ANGLE OF SHAFT ± 90o DIMENSIONS 1030x620 mm WEIGHT 137 kg Technical parameters WF12 ROLLERS SIZE 85x85 mm NUMBER OF ROLLERS 16 LOADING CAPACITY 18000 kg Cedpfx Aovxrzfoiporc LOADING HEIGHT 110 mm BEARING SURFACE ON ELEMENT 200x407 mm SUPPORT POINTS 2 CONNECTOR LENGHT 1430 mm WIDTH OF SPACING ROLLERS 1014 - 1430 mm WEIGHT 50 kg Manufacturer: Cormak

Condition: excellent (used), Langguth E 36 XPSP Labeler Labeler for self-adhesive labels, adhesive labels Crjdpfxol D Nams Aipsc dispensing via vacuum plate mobile on rolls Very good condition, directly from the Produktiion!!!

Condition: used, Year of construction: 1990, machine/vehicle number: 40562, Falzmaschine - Folding Machine Stahl T 36/4-FBaujahr / Year 1990 - Serial-No. 40562/90-163585 Flachstapelanleger / Flat Pile Feeder Falztyp / Folding Type 4 Taschen Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Cjdpfx Asr Hfc Roiporc Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, first registration: 01/2016, loading space length: 13,382 mm, loading space width: 2,410 mm, loading space height: 3,157 mm, * SAF axles * Hydraulic loading ramp * Hydraulic supports * Winch * Remote control * Edscha sliding roof system -----Internal vehicle number: 11079----Errors & interim sales reserved WhatsApp support available! Crodpfowz Dm Djx Aipjc If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, * Air suspension * SAF axles Cjdpfxewtaz Is Aipjrc * Stanchions * Twist-locks for containers * Unladen weight: 8,390 kg -----Internal vehicle number: 11009----Errors & prior sale excepted. WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to contact us via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic.

Condition: used, mileage: 265,950 km, power: 265 kW (360.30 HP), first registration: 10/1989, fuel type: diesel, overall weight: 24,000 kg, axle configuration: 3 axles, color: blue, gearing type: mechanical, Year of construction: 1989, Equipment: ABS, crane, Iveco 260-36 Magirus with Effer Crane Type 39000 BL-2S / Radio Remote Control / 6x4 / AP Axles ----* Manufacturer: Iveco * Model: 260-36 Magirus * First registration: 10/1989 Cedpfxox Suzgo Aipjrc * Mileage: approx. 265,950 km * Transmission: 8-speed manual gearbox * Gross vehicle weight: 24,000 kg * Unladen weight (per registration): 18,100 kg * Suspension: Leaf suspension * Tyres: 13R 22.5 approx. 50% * Axles: 6x4 / AP axles * Wheelbase: 3.25 m * ABS * 360 HP * Cab: short haul cab / 2 seats * Colour: Blue * Self-propelled work machine * Effer crane 39000 BL 2S with crane seat and radio remote control, year of manufacture 1995 * Maximum lifting capacity at 28.64 m = 320 kg * Lifting capacity at 12.36 m = 2,150 kg * Hydraulic outriggers front and rear, rear mechanically operated * 2 hydraulic extensions + 3 mechanical extensions * Rotzler winch type LK, year of manufacture 1996 * approx. 320-litre steel diesel tank on the right * Beacon lights * Quarter mudguards on 2nd & 3rd axles * Rear cab wall with window * Vertical exhaust on the right behind cab * PVC toolbox rear right German vehicle !! German documents !! Notice regarding possible errors in the listing: Despite careful preparation of the advertisement, mistakes may occasionally occur in the text or specifications. We do not accept liability for errors, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, turning length: 1,250 mm, turning diameter: 500 mm, Machine is stored in our Plovdiv , Bulgaria warehouse Machine has C axis function 1250 mm machining length Fanuc control system IN OUR STOCKS WE HAVE: *Horizontal Machining centers Credpfx Aijyrd Iuopjc *CNC lathes 2 axis *CNC lathes 2 axis + C axis *CNC lathes 2 acis + C axis + Y axis *CNC tapping centers *CNC vertical machining centers %100 owned +50 CNC machine tools in stock! You are welcome to contact us for your further questions CNC World Machine LTD

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Cedslbgfcspfx Aipsrc Inspection and cleaning of various accessories

Condition: new, thread dia. M6 - M36 mm turning speeds 156 U/min radius 1200 mm angle adjustable from - to 0 - 90 Grad weight of the machine ca. 0,4 t dimensions of the machine ca. 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. 1 each GT12 M6, M8, M10, M12, M14, M16, M18, M20, M22-24, Cedpjg N Nl Ijfx Aipsrc M27, M30, M33, M36 Substructure 900 x 600 x 875 mm