Used Vitari Straightening And Cut Machine for sale (71,904)

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Sold without cutting table. Nledpsv I U Hcjfx Agrjg

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Nlsdpfx Asy Urzijgrjg Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5150 P137 CUTTING LINE - refurbished => Package Price €26.000 1) Polar 137EMC-MON AT Guillotine 1995 -> single item price 18.000 € Njdpfov Ic H Dsx Agrelg 2) Transomat TR1ER145-3 Downstacker/Palletiser -> single item price 10,000 € 3) Jogger Polar RA-B-5 with Air Removal -> single item price 3.000 € 4) Paper Lift -> single item price 1.500 € Contact us for further info and for personal price negotiations

Condition: excellent (used), Year of construction: 2017, operating hours: 14,052 h, functionality: fully functional, machine/vehicle number: M15305531R, repeat accuracy: 0.02 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, positioning accuracy: 0.07 mm, workpiece weight (max.): 1,450 kg, type of input current: three-phase, input voltage: 380 V, travel speed (max.): 12,500 mm/min, MAXIEM 1530 II machine 30HP pump (22kW) Nodjyglpcspfx Agrslg Abrasive tank 1000 kg. In continuous operation, serviced every 500 hours.

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Nlsdezlr Rpepfx Agrog Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Manufacturer: MicroStep Nedpfjzt Imisx Agrolg Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Includes dust extraction system Donaltson Torit DCE. Machine available from September. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting width (max.): 3,200 mm, cutting length (max.): 2,200 mm, SUMMA F3220 – Professional Large-Format Cutting Table (2020) SUMMA F3220 - Working area: 327 x 210 cm Njdpfx Agjy Sapverolg - Vacuum extraction system 2.3 kW / Noise absorber - Package with 6 pneumatic media clamps + roll holder - Integrated camera - ADC Control module left + right INCLUDED MODULES AND TOOLS - Tangential module (x2) - V-Cut 45° - V-Cut 0° - Heavy Duty Cutout Tool (45° / 90°) - Double Edge Cutout Tool (50° / 60°) - Pneumatic oscillating tool - Creasing tool HIGH-FREQUENCY MILLING MODULE Complete high-frequency milling kit: - Routing module with brush system - SycoTec milling motor - Integrated electronics + vacuum control - 6 mm collet Additional accessories - Industrial vacuum cleaner HERCULES 3000W

Condition: ready for operation (used), Year of construction: 2017, operating hours: 26,000 h, functionality: fully functional, machine/vehicle number: M5427F3D01, Flow MACH 500 4020 DWJ Waterjet Cutting Machine Manufacturer: Flow Model: MACH 500 4020 DWJ Year of Manufacture: 2017 Technical Specifications Working area: 4,000 × 2,000 mm Dynamic Waterjet (DWJ) taper compensation cutting head UltraJet 60,000 PSI intensifier pump Abrasive waterjet cutting system Abrasive sludge extraction system Approx. 26,000 operating hours 380–480 V, 50/60 Hz, 3 Phase CE marked Machine Description A well-maintained Flow MACH 500 4020 Dynamic Waterjet cutting system in good working order. The machine is currently installed and can be inspected under power. Nsdpfezhkmujx Agrslg The Dynamic Waterjet head provides automatic taper compensation, producing highly accurate components with excellent edge quality while reducing secondary finishing operations. Suitable for cutting a wide range of materials including: Stainless Steel Mild Steel Aluminium Titanium Copper & Brass Plastics Composites Glass Stone Ceramics The machine is fitted with an UltraJet 60K intensifier pump and an abrasive sludge extraction system, making it suitable for continuous production environments. Condition Regularly maintained throughout its working life Fully operational Demonstration available by appointment Service history available on request Included Flow MACH 500 4020 Waterjet System Dynamic Waterjet Cutting Head UltraJet 60K Intensifier Pump Abrasive Delivery System Abrasive Sludge Extraction System Location: Ireland Price: On Request The machine is available immediately. Further photographs, videos, maintenance information and machine demonstrations can be provided upon request.

Condition: good (used), Year of construction: 2024, Manufacturer: ERMAKSAN Fibermark | Model: Fibermark SM 6000 3X1.5 Gen-5 | Serial Number: 33122-ERH | Year of Manufacture: 2024 | Working area: 3000 x 1500 mm; Resonator: 6000 Watt IPG-YLS fiber laser technology | Max. peak power: 6000 W | Laser wavelength: 1075+/-5 μm | Axes: X-U-Y-Z | Max. axis speed: 100 m/min | Acceleration: 2.5 G | Voltage: 380 V | Power: 28 kW | Protection class: IP 65 | Dimensions (approx.): 5295 mm x 2325 mm x 10360 mm (W x H x L) | Approx. weight: 14590 kg | Colour: Black-White-Orange | Structure: Steel | Working area: 3x1.5 meter laser processing field | The specified dimensions are approximate values. All other details are without guarantee. Njdpfxoy N Dkfo Agrelg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, sheet thickness (max.): 30 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Nedjw A H T Aspfx Agrelg Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Nodpfx Agsy D A Ifsrelg Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 5,666 h, laser hours: 5,666 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, positioning speed: 100 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 3,280 kg, power: 6,000 kW (8,157.72 HP), overall weight: 27,700 kg, total length: 22,450 mm, total width: 6,670 mm, total height: 2,565 mm, working range: 20,248,100 mm, Equipment: cooling unit, It is a machine with low operating hours and no faults. All its parts are original, and its maintenance has been performed by the authorized service center. Nsdpjwpii Tefx Agrslg

Condition: good (used), Year of construction: 2012, (Please provide us with your offer price.) Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Two machines of the same type are being sold. Year of manufacture: 2012 and 2015. Nedpfxjy Ty Hde Agrjlg Technical data can be found in the attached handout. Any warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 8061, Iijima’s excellent high-speed JF-1030, built in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting head adapted to be compatible with/for Bobst die-cutting punches and retaining strips. More modern LEUZE photoelectric sensors in the front and side guides. LEUZE ultrasonic detection with teach-in function. Sector segment driven by a double set of bevel gears instead of the previous triple system. This results in smoother, vibration-free operation of the gripper carriages. Chains replaced in May 2023. Gripper carriages have been overhauled where necessary, but not replaced. Current tolerance on the front guide for rigid cardboard is < 0.15 mm. Clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the pressure plate just before and after the worm gear. Oil seals replaced. Oil reservoirs flushed and thoroughly cleaned before switching from mineral oil to fully synthetic oil. Absolutely no foam formation, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be delivered including installation, transport and warranty. Other specifications according to the factory brochure. Technical Specifications – Flatbed Die-Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout --- Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm --- Performance • Maximum cutting pressure: when running max. sheet size 300 metric tons • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable 8 - 12 mm • Normal cutting rule height: 23.80 mm --- Pile Data Nljdex Ndu Dopfx Agrjg Feeder pile • Height (incl. pallet): 1,500 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,380 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg --- Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg --- Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min --- Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: good (used), functionality: fully functional, Year of construction: 2019, LiftMaster 1530 loading and unloading system for sale due to lack of use. Nsdpfx Agjzdiwmjrelg It was previously used with an L20 CO2 laser.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 001, We offer for sale a custom-built automatic cutting machine AMT Plus PVA, designed for high-volume production of short wooden components from pre-machined timber profiles and square sections. The machine automatically feeds, positions, clamps and cuts workpieces according to preset dimensions, ensuring high productivity and repeatability. Technical Specifications Manufacturer: AMT Plus s.r.o. Model: PVA Year of manufacture: 2018 Workpiece dimensions: Min.: 12 × 40 × 300 mm Max.: 70 × 160 × 800 mm Installed power: 40 kVA Power supply: 400 V / 50 Hz Air pressure: 0.6 MPa Air consumption: approx. 4.5 m³/h Features Servo-controlled positioning system Frequency-controlled saw drive Pneumatic clamping Nsdpezyrdljfx Agrelg Multi-blade cutting unit Integrated waste conveyor Fully enclosed safety guarding with dust extraction connections Dimensions Approx. 3500 × 1320 × 2140 mm Condition Fully functional Good technical condition Available for inspection and testing Applications Ideal for the production of: furniture components hardwood blocks flooring elements window and door components other precision-cut wooden parts Sale Terms Available immediately Dismantling and transport to be arranged by the buyer Custom-built machine originally developed for accurate cutting of short wooden components in serial production.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: Nodpoxwlmuefx Agrslg - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net Nsdpofv Hphsfx Agrelg dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 1961, functionality: fully functional, machine/vehicle number: D08L/7656, Offer Number: D08L/7656 Nedpfxswi S H Is Agrelg Machinetype: straightening and cutting machine Info: double wire processing Make: BÜNDGENS Type: UD2 Constr. year: 1961 diameter range: 0,8-2 mm cutting length: 1000 mm speed - meters/min: 80 Location: In our warehouse

Condition: good (used), Polar Mohr N92 PRO HD Paper Cutting Guillotine Machine in perfect condition, serviced, and ready to work. Manufactured in 2021. Unprecedented model on the market. Cutting visualization on the monitor. Technical specifications: Cutting width: 920mm Stack height: 130mm Programmer with a 21.5” HD color touchscreen display 400V power supply Weight: 2000kg Enlarged side tables Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Additional rear table covers Njdoz E A Ntjpfx Agrslg Spare knife, cutting sticks, tapping block, and operating tools.

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Nlodpjwh R R Nsfx Agrog

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M440104, input voltage: 400 V, input current: 2 A, input frequency: 50 Hz, Plasma cutting system CMS3 Plasma Wasp 300x150 cm including Viaduct software Nlodpfsz A Uqqjx Agrog with Nitec Fiblo 4000 extraction system Inspection only by appointment! Collection only.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, I am offering this ready-to-use DMS digital card cutter, Series 3, with extended stacking table, card cutting machine/multi-finishing capabilities, perforating and scoring functions, manufactured in 2024. Original price: €12,900. Counter reading: only 5,900 sheets. Sheet stack feeder with compressed air and double sheet detection up to format 33x67 cm. Programmable cuts. Programmable scoring or perforation. 2 double knives with 8mm strip cut, 2 side knives. Fast knife adjustment system, only 1 minute setup time. Long stacking table with motorized automatic shingle delivery. Selling price: €6,720 + VAT, collection only. Location: 63450 Hanau (near Frankfurt/Main), Germany. If you have any questions or require further information, please feel free to send us a message or call us. Njdpjy Ufnpsfx Agrelg

Condition: used, Year of construction: 1994, material width 500 mm coil weight 3,0 t material thickness 0,2 - 2,5 mm coil internal diameter 470 - 530 mm coil external diameter 1400 mm no. of straightening rolls 9 straightening roll diameter 40 mm number of inlet and outlet rolls 4 material cross-cut 1200 mm² speed 1,5 - 30 m/min dimensions decoiler (WxDxH) 1,9 x 0,6 x 1,7 m weight decoiler 1,1 t dimensions straightener (WxDxH) 3,3 x 1,3 x 2,7 m weight straightener 3,0 t - Straightening machine RYD 40 x 500 with infinitely variable drive (driven lower straightening rolls), straightening rolls individually adjustable by motor, supporting rolls, outlet roller basket - Decoiler DY 500 x 3000 Nlsdpfx Agozrppiereg with hydraulic auxiliary drive, pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, hydraulic insertion aid, hydraulic coil lifting device - coil loop control

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser type: fiber laser, laser hours: 1,347 h, laser power: 3,000 W, • The state-of-the-art laser cutting system, designed to the latest standards and featuring a gantry construction with a dual-drive system, has a generously sized working area of 3000 x 1500 mm, making it suitable for the most common sheet metal formats. Nljdpfxszz A A Is Agreg • The automatic laser cutting head features Auto Focus (motorized focus adjustment), automatic height control, and collision protection. • Optimized setup times thanks to a change table system and an easy-to-use CNC control system with an extensive material database. • The fiber laser with 3000 W steel cutting power guarantees the highest cutting quality and productivity. • Thanks to the maintenance-free laser source, the cutting system also boasts low maintenance and operating costs. Complete system with CNC control (CypCut) Ytterbium fiber laser MAX Optical fiber cable High-pressure cutting head Automatic focus adjustment Laser protection enclosure Automatic change table system Filter extraction system Central lubrication Cooling water chiller CAD/CAM software Operating and programming manual Inspection while the system is running is welcome.