Used Winter Edge Banding Machine for sale (67,849)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units 75.30 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 + 283.201 Pressure zone Edge coils supporting unit (No. of reels) 6 Rough Trimming unit 08.055 (2 x Kw 1) 0°-30° Fine Trimming unit 08.055 (2 x Kw 0,66) 0°-30° Profile Scraping unit 08.515 Free space Djdsunrwnspfx Adrocn Buffing unit 08.617-2 (2 x Kw 0,18) Nr. 2 Milling grooving units RIGHT: 75.30 (2 x Kw 4,4) 90°-180°

Year of construction: 2011, condition: like new (used), I sell the fully equipped edge banding machine SCM Olimpic S3000, year 2011: Configuration: Entry fence servomotorical adjustable Premilling pneumatic adjustable Edge banding with preheating tank Material pressure zone pneumatic adjustable End cutting saws pneumatic adjustable Rough milling manual adjustable Tilting radius milling top + bottom pneumatic adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers manual adjustable Polishing brushes Hot-air blower Separator spraying front and back STARTOUCH control system Barcode reader Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 12m/min. Dodpfenwkbcsx Adrocn PUR glue possible. Second glue tank absolutely new included. Only 6.153 meters edgenbanded ! Machine practically new. Very good condition, fully working!

Condition: excellent (used), Year of construction: 2010, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2010: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Glue scrapers Control panel Working thickness adjustment manual driven Dcedpfx Aozn Avzedron Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1600kg Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2007, machine/vehicle number: 3750, functionality: fully functional, The machine applies adhesive to solid wood up to 18.0 mm thick and rolled materials up to 3.0 mm thick. Dedpfx Aeigad Eodrjcn It also applies edge banding from rolls, 3.0 mm thick PVC, ABS, and real wood up to 2.0 mm thick. It features edge trimming at 18 mm. Rounding and bevel milling stations are included. Total length: 3.20 m. Power consumption: 7.1 kW. Includes an adhesive tank. Equipped with an edge trimming shear. Features stepless feed. A miter saw is included for front and rear edges. A flush trimming unit is included. A rounding milling unit is included. Equipped with a chassis. Dust extraction connection: 100 mm.

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (5,8 + 5,8) - Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Guide Z-axe) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (Kw 0,3 x 2) speed 28m/min. 0 - 25°. PNEU Fine Trimming unit (Multi-profile, by N.C.) RF 30 (Kw 0,65 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0,3 x 2) max 25 m/min - ROTAX motors with automatic tool change (8+8 position store) Profile Scraping unit (Multi-profile, by N.C.) RB 30 Dsdeu Tg Uqspfx Adrjcn Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2) With ‘hopper’ for panels (useful height mm 80), as a buffer, to speed up the work cycle

Condition: used, Year of construction: 2016, Used Machine Year of Manufacture: 2016 Condition: Overhauled by a Holz-Her specialist Features and Technical Specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - FG 201 jointing unit with 2 milling heads, including 70 x 48 x 30 mm Z 2 diameter cutters - Edge feeder 1903, single-feed, automatic transport of roll and strip stock - Glu Jet GJ 301 gluing system with automatic glue height adjustment (probing nozzle) - With magazine for glue cartridges - Pneumatic pressure unit 1912-3; first roll driven with pneumatic immersion control - Trimming unit 1918, pneumatically swiveling 0–10 degrees - Multifunction milling unit 1827 MOT 4 with pneumatic package, including dia. cutters - Profile milling unit 1832 for corner copying with radius cutters - Scraper unit 1929 MOT 2 - Chip collection box - Surface scraper FK 701 - Polishing unit 1940 - New main heater - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6–60 - Edge thickness (mm) 0.4–6 - Feed speed (m/min) 10 Dcodezk N U Aepfx Adren - Overall length (mm) 4930 - Weight (kg) 1420 Availability: available immediately Location: 63934 Röllbach

Condition: new, Year of construction: 2025, Edge banding machine F5 with PLC control (including 15" touchscreen), hot melt adhesive application to the workpiece for edge banding material up to 3 mm: Joint milling cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with interchangeable pot preparation, including adhesive dispensing device, Dodsh Hl Ayepfx Adrecn HF milling station with pneumatic milling adjustment, including corner rounding milling cutter, radius trimming knife, edge trimming knife (including pneumatic extraction device), finishing station Joint head Whispercut Combination milling head Radius milling cutter R=2mm Radius corner milling cutter R=2mm Quick-change preparation for corner milling cutter Radius change motor R=1mm Multi-radius trimming knife R1/R2 Chassis Spray device for release agent (PUR) Spray device for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDING 2nd interchangeable glue pot max. edge thickness 3mm Workpiece thickness 8-50mm min. workpiece length approx. 160mm Feed speed 10m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300x1300x1400mm LxWxH Weight approx. 900kg Extraction port 1 x 140mm

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 4912, functionality: fully functional, cutting height (max.): 500 mm, cutting width (max.): 770 mm, overall weight: 1,200 kg, saw band length: 5,540 mm, saw band width: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting length up to feed roller: max. 225 mm Cutting length up to stop: max. 210 mm Cutting width up to column: max. 770 mm Cutting height: max. 500 mm Saw blade width: max. 80 mm Saw blade length: min. 5,380 mm Saw blade length: max. 5,540 mm Wheel diameter: 800 mm Table width: 1,200 mm Table length: 800 mm Table: Adjustable MACHINE DETAILS Dust extraction port diameter: 120 mm Voltage: 400 V Power consumption: 31 A Fuse: 63 A Main motor power: 15 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 1,800 x 2,100 x 2,380 mm Weight: 1,200 kg EQUIPMENT Adjustable table CE marking Feed rollers, automatic, electric Dcedpfx Asz Ea Iaodron

Condition: good (used), Year of construction: 2002, I sell the edge banding machine HEBROCK AKV088D, Year 2002. Dodpovx D Auefx Adrocn Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius milling machine HFF08.

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Dcodpfoxy Tm Iex Adrjn

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Dcedpozuyh Iofx Adrjn Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment Dsdpfxsi Am Uko Adrecn 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips/lippings max) mm 1,3 Dodpsfi Tkvefx Adrjcn Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 ca. Numerical Control /Software ICOS Open Adjustable feeding speed (m/min ) 8 - 40 Without Transmission bar (Master & Slave system) Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Pre-Milling unit 75.30 (Kw 6,6 x 2) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1570 + 283.205 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Fine Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (Kw 0,66 x 2) max 25 m/min Corner Rounding unit (Contour Trimming) 08.465 (Kw 0,18 x 4) max 20 m/min Buffing unit 08.617-2 (Kw 0,18 x 2) Free space

Condition: used, Year of construction: 1995, Used machine Dcedpfx Aewpm Igodron Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Availability: short term

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. →Automatic edge feeding for roller material over turntable D = 800 mm. Dodpfjf Tdwcox Adrscn →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise Dodpfszlbpzsx Adrocn - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Dcedpoiamufefx Adron Edge magazine Gluing station 1906 Printing unit 1914 Cross-cutting saw unit 1976 Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Separation fluid spraying front Central lubrication system Djdpjxncrvefx Adrscn Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry Dedpfx Adjwtfvkorecn

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next Djdpfji Anadox Adrecn With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 Dsdpfxsywk Els Adrscn OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Dodsvwfmlepfx Adrocn

Condition: excellent (used), Double side - Independent Machine (1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 10 (ca.) / 60 Working width (min/max) mm 260 (ca.) / 3200 Numerical Control MAESTRO PRO EDGE /Software EYE-M Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) with CNC vertical adjustment Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side + Glueing Unit (PUR Glue + Quick Melt system) CNC adjustment of the edge height Band Pressure zone (N.C. adjustment) + Edge coils support (No 6 reels) CNC positioning of the edge Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C. adjustment) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Milling grooving unit U (1 x Kw 5,5) on Left-side Dodpfezmfg Tjx Adrecn Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE

Condition: new, Edge banding machine (with hinge holes passing function) (new) Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Dcjdjxv Udaspfx Adron Weight 960 kg Price 11200 Eur (EXW Jonava, Lithuania)

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Dcedpszrpnlefx Adren Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse