Used Lch-3000-N Relfar for sale (56,076)

Condition: new, Year of construction: 2025, Two tables are connected via a tandem system to achieve a combined load capacity of 5000 kg. Technical description with the following key data: Load capacity: 3000 kg static line load Useful stroke: 800 mm Overall height: 240 mm Knjdpfx Aek E Hmtendsa Total height: 1040 mm Platform length: 1300 mm Platform width: 1000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for the full useful stroke Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earth, with 16 A CEE plug and 3-meter cable Motor: 2.2 kW, 1400 rpm Valve voltage: 24 V DC Protection rating: IP 54 generally, solenoid valve and switch IP 65 Paint finish: Steel blue RAL 5011 Unit placement: integrated in the lifting table Control box: Dead man's control including 2 m cable Total weight: approx. 330 kg Tandem control for synchronized operation. Note: No guarantee can be given for 100% synchronous operation. Any height differences that may occur will be compensated for in the base position or upper position. The safety cut-out strips of the two lifting tables are NOT interlocked. Minimum distance: 500 mm between the lifting tables. Maximum distance: 3000 mm between the lifting tables. Self-supporting base frame with 4 flanged wheels, into which the lifting table is installed. 4 ball-bearing flanged wheels, wheel diameter 150/175, heavy-duty design for maximum load, made of turned steel C45. Overall height: + approx. 50 mm.

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Knedpoyx U N Djfx Andsa Price on request!

Year of construction: 2026, condition: new, functionality: fully functional, Robotic Grinding and Polishing Cell – CNC Control SINUMERIK ONE We offer a modern robotic cell designed for precise and efficient grinding and polishing operations using CNC control. An ideal solution for production automation and achieving consistent, high-quality surface finishes. Key features: Industrial robot with a 3000 mm reach Fully enclosed safety cell Control system Siemens SINUMERIK ONE HT2 operator panel 22" touchscreen interface for intuitive operation Programming and control: Programming via NC code (standard CNC) Shopfloor programming: ShopTurn ShopMill Capability to program using standard CAD/CAM systems Intuitive program creation directly on the machine – no CAM required Processing technology: High-performance grinding spindle PushCorp (power selectable based on application requirements) Optional extensions: Integration of a rotary table (positioner) إمكانية إضافة linear axis to extend the working envelope Option to integrate a machining spindle with automatic tool changer (ATC) Fully customizable based on customer-specific applications Benefits: High repeatability and consistent surface quality Combination of robotics and CNC control in one system Flexibility for grinding, polishing, and subsequent machining in a single setup Knedpfxsy D Nwte Andja Wide range of programming options (NC, shopfloor, CAD/CAM) Easy operation thanks to shopfloor programming Ready for Industry 4.0 integration

Condition: used, operating hours: 20 h, Fuel type: Diesel Ksdpfouu Df Dox Andona

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Kjdpfxeyudtps Andjna Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: new, empty load weight: 680 kg, maximum load weight: 2,320 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, color: silver, construction height: 830 mm, working width: 2,040 mm, Hydraulics, automatic reverse drive, full aluminium floor / winch / drive-on ramps, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * incl. full aluminium floor / winch / drive-on ramps Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 680 kg - Payload: 2,320 kg - Interior dimensions: 400 x 203 x 0 cm (L x W x H) - Overall exterior dimensions: 537 x 204 x 83 cm (LxWxH) - Loading sill height: 60 cm - Tyres: 195/55R10 steel rim - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - Floor: full aluminium floor! - Drop sides: optional retrofittable - Drop side height: 0cm - Chassis: high loader, KNOTT rubber spring axle - Tipping function: no - Hydraulics: none - Drive-on angle: approx. 13 - Wheel stops: prepared front & rear - Overrun device & brake: KNOTT - Frame/chassis: welded hot-dip galvanized steel frame - Lashing eyes: 14 in the floor - Winch: yes. manual, with adjustable winch bracket - Supports: at extra charge Ramps: solid steel, grating can be slid underneath 255cm long - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - 18mm aluminum floor - extremely robust - preparation for drop sides - cable winch with cable winch bracket standard - cable winch removable and can be inserted on the left or right, as well as adjustable in length - very stable welded steel frame - frame cpl. hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded throughout - 14 lashing eyes inside the loading area - steel grid ramps can be inserted under the loading area, L=255cm - automatic reverse drive - KNOTT overrun device and parking brake - KNOTT cast coupling head - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing light - very sturdy V-drawbar plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic support wheel in the middle - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100 km/h approval with shock absorbers - anti-theft device - drop sides - wheel stoppers - spare wheel - storage box - rear supports - high tarpaulin - additional lashing eyes - reversing light - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Knodpfju Hrw Hsx Andsa

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads Ksdpfjymaw Uox Andsna - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: used, Year of construction: 1983, turning diameter 820 mm turning length 300 mm turning diameter over slide 465 mm max. torque on the spindle 3000 Nm turning speeds 5,6-1120 U/min Feed 1-5000 mm/min Rapid movement 5000 mm/min tailstock quill taper MT 6 main drive motor 50 kW diameter of main spindle 170 mm spindle passage 128 mm tailstock quill diameter 125 mm tailstock quill stroke 250 mm z-axis 3000 mm x-axis 550 mm total power requirement 52 kW weight of the machine ca. 7,1 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Knedeyqvamopfx Andea We look forward to your visit. Your Markus Hirsch Team

Condition: new, turning length 3000 mm turning diameter 660 mm turning dia. in gap 900 mm turning diameter over slide 460 mm turning speeds 25 - 1600 U/min quill: 5 MK quill travel 235 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 3.300 kg. dimensions 4.630 x 1.200 x 1.529 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Change gears - Reduction sleeve - Chip back wall Kodpfx Aoxaahljndena - Cable routing via energy chain - Operating tool

Condition: new, turning length 3000 mm turning diameter 800 mm turning dia. in gap 1000 mm turning diameter over slide 540 mm Kodpfxjxabcds Andena turning speeds 25 - 1600 U/min quill: 5 MK quill travel 235 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 weight of the machine ca. 3820 kg. dimensions 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 100 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Rapid traverse lengthwise and facewise - Slip clutch - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - LED machine light - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: new, 2000 mm Working width 400 mm Wheel width 400 mm height adjustment 750 - 1100 mm weight of the machine ca. 0,80 t dimensions 2,0 x 0,55 x 1,0 m Kjdpfjwz Ruhox Andena

Condition: new, 3000 mm Working width 360 mm Kodsfv Attspfx Andjna Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, next inspection (TÜV): 02/2028, color: white, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, traction control, Seat covers in fabric design Double Grid, automatic transmission, air conditioning with manual control in the driver's cab, daytime running lights (always on when driving), touchscreen, driver's airbag, sun visors with ticket pocket on the driver's side and airbag label on the passenger sun visor, radio Composition Colour, MP3 interface, emergency call system eCall, electronic stabilization program ABS ASR EDS hill start assist brake assist, central locking with radio remote control and interior operation, power steering electromechanically controlled depending on speed, steering column height and length adjustable, ParkPilot in the rear area, cruise control system including speed limiter, immobilizer (electronic), start-stop system with brake energy recovery, headrests height adjustable front and rear, exterior mirrors electrically adjustable and heated, 4 steel wheels 6.5 J x 16 in 20 hole design, lumbar supports for left and right individual seats in the 1st row of seats (both manually adjustable), laminated glass windscreen with heat-insulating glazing, Tire Mobility Set: 12-volt compressor and tire sealant, non-smoking vehicle, headlight range adjustment, service history, sliding door on the right in the loading/passenger compartment, paintwork: candy white, prepared for We Connect and We Connect Plus, heated tailgate with window, Transporter lettering on the fender without lettering on the rear, height adjustment for left single seat in the driver's cab, swivel seat on the right in the 1st row of seats (not height-adjustable), armrests for both seats in the driver's cab, 1 12-volt socket in the dashboard, approval with up to 3 seats, crosswind assistant, battery/generator, heat-insulating glass (green), tires 205/65 R 16 C 1 T optimized for rolling resistance, hill start assist, fuel tank with 70 l tank volume, standard suspension and damping, type plate for commercial vehicle with EC type approval with Weight specification with COC papers, steering wheel, full wheel covers for 16-wheels, 16-chassis with 16-brake system, bumpers in grey, standard sound deadening measures, loading sill protection (inside) in plastic, unpainted door trim, normal roof (with attachment points for roof rack systems: 8 for the short wheelbase, 10 for the long wheelbase), seat on the left in the 1st row of seats, emissions standard Euro 6d ISC-FCM, tailgate closure without unlocking function from the inside, airbags for driver and front passenger with passenger airbag deactivation, glove compartment without lighting, rubber floor covering in the driver's cab, comfort headliner in the driver's cab, interior roof paneling made of hardboard in the passenger/loading area, side paneling (half-height) made of hardboard in the loading area, registration as a truck, transport protection measures without surface protection film, folding grab handles on the roof frame, hinges for rear doors/tailgate in standard design, lashing eyes for securing the load, outside mirror housings and door handles in black, H7 halogen double headlights, 4-stage adjustable windscreen wiper interval control, standard rear lights, interior lighting in the loading/passenger compartment, non-smoking version, mobile phone interface, prior sale and errors for this offer are expressly reserved. The vehicle description is only for general identification of the vehicle and does not constitute a guarantee in the sense of sales law. The only decisive factors are the agreements in the order confi Ksdevib Enepfx Andona

Condition: new, empty load weight: 550 kg, maximum load weight: 2,450 kg, overall weight: 3,000 kg, loading space length: 5,070 mm, loading space width: 2,000 mm, loading space height: 180 mm, tire size: 185/60R12, Car transporter with tarpaulin body from the manufacturer ANSSEMS model AMT3000.507x200. As standard equipment, the Anssems car trailer has an aluminum floor, lashing eyes on the outside of the frame and on the top of the side panel, aluminum drive-on rails can be inserted under the loading area, low chassis, removable front and rear drop sides, tarpaulin & frame with wind slope, light track, tarpaulin roller blind and sliding tarpaulin on the left, winch can be adjusted and pulled out on the left and right, rear support set, support wheel and a V-drawbar. Ksdpfjuh R S Aox Andjna We also offer accessories for Anssems car transport trailers such as side wall attachment, wheel stopper, tool box, car lashing straps and anti-theft device.

Condition: new, empty load weight: 540 kg, maximum load weight: 2,460 kg, overall weight: 3,000 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from the manufacturer ANSSEMS model MSX3000 405x200 Go-Getter. Knjdpfsq Rfl Tsx Andsa As standard equipment, the Anssems car trailer has an aluminum floor, side edge profile in black, aluminum rims in black, LED lighting, storage box, lashing eyes on the outside of the frame, aluminum drive-on rails can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as high tarpaulin, side wall attachment, wheel stopper, rear support set, car lashing straps and anti-theft device.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, For sale: Losman air cleaning units in excellent condition, suitable for applications such as removing oil mist generated in metalworking. The cleaned air is returned to the workspace, and the condensed coolant collected during filtration can be recycled. There are 2 units available, one of which is from 2014. Both units have had their filters replaced. Knedpfx Anoyk Sknodja

Condition: new, Bernardo Universal Lathe Titan 560 x 3000 Pro Vario Technical Specifications Centre distance: 3000 mm Centre height: 280 mm Swing over bed: 560 mm Swing over gap: 785 mm Swing over cross slide: 350 mm Bed width: 350 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1 – 8 Speed range: 25 – 220 / 220 – 1500 rpm Longitudinal feed range (42): 0.055 – 3.061 mm/rev Cross feed range (42): 0.025 – 1.384 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 75 mm Quill stroke: 185 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (L): 4340 mm Width x Height: 1150 x 1610 mm Weight: approx. 3000 kg Features • Standard with Delta frequency inverter for high torque at low speed and nearly constant speed under load • Stepless speed control, with digital speed readout Kjdpfx Aexl Tdqsndona • Versatile applications in general engineering, production, single-part manufacture, etc. • Removable gap bridge allows machining of large-diameter workpieces • Rapid traverse longitudinally and in cross direction as standard, reducing non-productive time • Modern main spindle bearing with precision angular contact ball bearings • The machine bed is made from a single casting, extremely torsion-resistant and low-vibration, providing the foundation for precise turning • Tailstock is adjustable for taper turning • Central lubrication system for carriage Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-315 mm / D8 • Fixed steady rest – max. workpiece diameter 180 mm • Travelling steady rest – max. workpiece diameter 120 mm • Foot pedal with CE-compliant brake function • Safety guard for quick-change tool post • LED machine lamp • Initial fill with Shell Tellus 46 • Faceplate 450 mm • 2 centre points • Frequency inverter • Digital speed readout • Safety slip clutch • Rapid traverse longitudinally and in cross direction • Coolant system • Quick-change tool post with 4 holders • Change gears • Reducing sleeve • Chip guard tool kit

Condition: new, Bernardo Universal Lathe Titan 660 x 3000 Technical Specifications Distance between centers: 3000 mm Center height: 330 mm Swing over bed: 660 mm Swing over gap: 900 mm Swing over cross slide: 460 mm Knodpfxoxxayfj Andea Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range: (16) 25 - 1600 rpm Longitudinal feed range: (25) 0.044 - 1.48 mm/rev Cross feed range: (25) 0.022 - 0.740 mm/rev Metric threads: (54) 0.45 - 120 mm Inch threads: (54) 7/16 - 80 TPI Tailstock quill diameter: 90 mm Tailstock quill travel: 235 mm Tailstock taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 4630 x 1200 x 1520 mm Approx. weight: 3300 kg Features • Versatile use in general mechanical engineering, production, single-part manufacturing, etc. • Central, user-friendly control for feeds and threading with leadscrew and feed shaft • Prism bed made of cast iron, inductively hardened and precision ground • Modern main spindle bearings with precision angular contact roller bearings • Hardened and ground gears and shafts, also in the feed gearbox • Rapid traverse longitudinal and cross as standard to reduce non-productive times • Large spindle bore (105 mm) for machining workpieces with large diameter • Smooth start-up via mechanical multi-plate clutch • Electromechanical foot brake to reduce non-productive times • Optimal cutting performance even during facing operations • Bed reinforced with robust ribs to stiffen the guideway and minimize vibration influences Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • Slip clutch • Rapid traverse longitudinal and cross • LED machine light • 3-jaw steel chuck PO3-315 mm / D8 • Face plate 450 mm • Fixed steady rest – through hole diameter max. 180 mm • Travelling steady rest – through hole diameter max. 120 mm • 2 live centers • Motor with magnetic brake to CE standard • Foot pedal with brake function to CE standard • Initial filling with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Change gears • Reducing sleeve • Chip guard rear panel • Cable management via energy chain • Operating tools

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 Knedpfxow Tcnce Andea CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 450 kg Knedsv A Hc Eepfx Andja Total power requirement 0 kw

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000 Ksdpfx Ansqwyclodena

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Tool holder SK50 Internal cooling with 36 bar Knjdpfjx I A Hvox Andea Longitudinal chip conveyor + cross conveyor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2352, center height: 200 mm, grinding length: 500 mm, grinding diameter: 55 mm, rotational speed (max.): 5,970 rpm, controller model: Siemens Sinumerik 840-D, TECHNICAL DETAILS Grinding diameter: 5–55 mm Grinding length: 500 mm Workpiece diameter: 5–55 mm Workpiece length: max. 500 mm Grinding wheel arrangement: right, 30° inclined Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z-axis drive: ball screw Travel speed: 0.01 – 10,000 mm/min Resolution: 1 µm Workpiece spindle runout: < 1 µm Spindle speed max.: 5,970 rpm Workpiece changing system: Fanuc robot Control system: Siemens Sinumerik 840-D Ksdpfx Anjxvxl Iedsna MACHINE DETAILS Total power requirement: 44 kW Centre height: 200 mm Machine weight: 7,000 kg EQUIPMENT Tailstock Longitudinal adjustment: manual Rotating centre: Junker standard, diameter 75 mm Clamping pressure: adjustable via hydraulic system Tailstock dimensions: diameter 100 mm × 430 mm

Condition: used, mileage: 712,819 km, power: 309 kW (420.12 HP), first registration: 08/2008, fuel type: diesel, empty load weight: 9,175 kg, overall weight: 18,000 kg, axle configuration: 2 axles, color: brown, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, trailer coupling, Manufacturer: Scania - Type/Model: P420 - Outer shell: GRP (stainless steel inside) - 4 compartments (1956/1176/3000/3060) = 9,186 l tank capacity - Tank body: GRP INSULATED - First registration: 28/08/2008 - Mileage: 712,819 km - Number of axles: 2 - Emission class: Euro 5 - Cab: M - Transmission: manual gearbox - Suspension: leaf/air - Brakes: disc - Length: 8,010 mm - Width: 2,550 mm - Height: 3,030 mm - Unladen weight: 9,175 kg - Tank material: stainless steel - Total tank capacity: 9,186 l - Tank compartments: 4 - Insulated - System description: with outlets only Knodjxtuikjpfx Andsa

Condition: new, working width: 85,000 mm, For enquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. H3 085 Mulcher / NEW / in stock & immediately available Price: €6,890.00 net / €8,199.10 gross - Working width: 85 cm - Total width: 97 cm - Depth: 80 cm - Height: 66 cm - Weight: 181 kg - Mulching head for mounting on a hydraulic arm - Mulches grass and brush up to 3 cm diameter - Suitable for excavators from 2 to 5 tonnes - Suitable for mounting on various adapter plates - Floating attachment (parallelogram linkage) - Indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor, depending on the carrier’s hydraulic flow rate - Housing made from wear-resistant AR400 steel - Front protection with chains - Rear guard made of rubber - Reinforced support roller with double taper roller bearings, height adjustable - Colour: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flails (standard) Knsdpfxoyi Ryxj Andja - 9 pieces, spare part no. 150.02.041 OPT 428 Hydraulic gear motor 11cm³ - With flow control valve and motor safety valve DRAIN SAFE TM to protect the motor in case of improper use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 20 - 50 OPT 529 DRAINLESS system with pressure accumulator (NO leakage oil line required!) - Includes hoses and non-return valve Optional: MS03 adapter plate incl. bolts and installation = €530 net Two hydraulic lines are required: supply and return. No leakage oil line is needed! The unit is supplied without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a large selection of various Seppi M. products in stock, all immediately available! Simply contact us at / . Financing offer available on request. We are official Seppi M. distributor and service partner. We are official Magni telehandler distributor and service partner. We are official DMS distributor and service partner. We are official Westtech distributor and service partner. We are official JCB construction machinery distributor and service partner. We are official Mercedes-Benz distributor and service partner. We are official Iveco distributor and service partner. We are official Holp distributor and service partner. We are official OilQuick distributor and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for more information.