Used Mb 32 Water Tank for sale (25,590)

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: B42523, Operating principle: The separator separates injection-molded plastic parts from the sprues by means of a rotating screw/roller, based on the different component sizes. Condition: Like new! Iodpfxszau Uho Anwjth

Condition: like new (used), Year of construction: 2018, functionality: fully functional, conveyor belt length: 6,000 mm, conveyor belt width: 2,000 mm, Manufacturer: MB Conveyors Model: PA ALL Itsdpfx Aewfym Ijnwjh Year of manufacture: 2018 Length: 600 cm Width: 200 cm Conveyor belt in as-new condition! PRICE REDUCTION FROM 2950 TO 2750 EUR!!!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Isdpfxjrivv Ee Anweth Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 400-223, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 200 mm, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, mount diameter: 40 mm, table length: 2,500 mm, table width: 1,250 mm, spindle speed (min.): 100 rpm, spindle speed (max.): 30,000 rpm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, tool diameter: 20 mm, number of slots in tool magazine: 30, We offer this used MB-Portatec GmbH basic IIS Portatec basic II.S portal milling machine, manufactured in 2011. Manufacturer: MB - PORTATEC GmbH Type: basic II.S Itjdpfx Aey U R Sysnwjh Serial number: 400-223 Year of manufacture: 2011 -Application: Processing of aluminum and plastics from sheets up to 2500mm. -Optional extra: Vertical clamping system. -Accessories: Vacuum pump and extraction system with pre-separator. -MMS system -Programmable vacuum fields If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads - hydraulic power unit Itodsu Ictnepfx Anwjh accessories: - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *

Condition: new, Year of construction: 2026, Ring Rolling Machine MB 50 - with standard roller set - footpedal - two drivn rollers Isdpedkxlksfx Anweth - horizontal and vertical use - bending capacity round tube up to 60 x3,6 mm - angle iron 50x50x6 mm - solid steel 35 mm - main motor 1,5 kw - shaft diameter 50 mm - weight 325 kg - 400 volt 3 phase

Condition: excellent (used), For sale: Siemens 1FK6083-6AF71-1GH0 servomotor. /////This offer applies to 1 unit, as shown in the photos.///// Itjdpfx Aey Umvzonwsh Used motors, technically functional, in good visual condition. Normal signs of use and storage. Technical data: Manufacturer: Siemens Model: 1FK6083-6AF71-1GH0 Torque M0: 16.0 Nm Torque MN: 9.5 Nm Current I0: 10.4 A Current IN: 6.9 A Voltage: 306 V Max. speed: 5600 rpm Nominal speed: 3000 rpm Protection class: IP64 Encoder: A-32 Brake: 24VDC 21W Made in Germany Condition: used technically functional shaft rotates correctly complete as shown in the photos Application: CNC machine tools industrial automation servo drives machine modernization

Condition: excellent (used), For sale: a Siemens servomotor. Used device, technically functional, in good visual condition. Normal signs of storage use are visible. Model: Siemens 1FK6063-6AF71-1GH0 Technical data: Torque M0: 5.4 Nm Current IN: 4.2 A Maximum speed: 6000 rpm Rated speed: 3000 rpm Voltage: 276 V Protection class: IP64 Brake: 24VDC 15.6W Encoder: A-32 Made in Germany Condition: used technically functional shaft rotates correctly complete, as shown in the pictures Iedpey Umttsfx Anwoth Ideal for: CNC machine tools industrial automation servo drives machine modernization

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Itjdpfxsx Uum Ij Anwsh

Condition: excellent (used), For sale: high-end precision boring head EPB LIBRAFLEX / GRAFLEX with SK40 DIN 69871 taper, made in France. This is a professional tool for precision hole machining—both roughing and finishing—on CNC milling machines and machining centers. This model features micrometric diameter adjustment in the range of Ø2 mm to Ø32 mm (0.079” – 1.260”), allowing for the highest accuracy in machining industrial components, moulds, and technical parts. 📌 Technical Specifications: • Manufacturer: EPB LIBRAFLEX / GRAFLEX – Made in France • Taper: SK40 – DIN 69871 • Adjustment range: Ø2 – 32 mm Iodsxizcvjpfx Anwjth • Adjustment accuracy: 0.01 mm / 0.0004” • Precision micrometric scale with clear graduation • Set includes head + holder + KOMET tool • Condition: used, in very good technical condition – ready for work ✅ Advantages: • High adjustment precision – ideal for hole finishing • Robust industrial construction – long service life • Compatible with CNC machines and conventional milling machines with SK40 taper • Micrometric diameter setting with μm reading • Ideal for industrial applications, toolrooms, and precision manufacturing

Condition: new, For sale: Electric motor from the renowned German company Kuenle Elektromotoren Model KPER 132 S4 The motor is new, warehouse surplus Never used Very good condition, possible storage marks visible in photos Technical data: Power: 5.5 kW Speed: approx. 1440 rpm Voltage: 380/660 V Frequency: 50 Hz cos phi: 0.82 Protection class: IP54 Design: IM B3 Made in Germany Isdpfoyv R Sisx Anweth Applications: industrial machinery pumps fans production lines automation Robust, high-quality German industrial motor Ready for operation immediately after connection

Condition: used, Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbH Z-conveyor, sliding belt conveyor, conveyor belt, magnetic belt conveyor Type no.: MBF 326P31,75 Com. no.: 44489-10 Year of construction 2017 Slide width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to body box) Slide-in length approx. 3900 mm (without superstructure box) Slide-in height 210 mm Insertion width housing 370 mm Insertion width threaded mounts for adjustable feet 410 mm Insertion width at body box 470 mm Conveying height - discharge height approx. 1040 mm Conveyor speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 Volt, 50 Hz - Circulating chain equipped with permanent magnets Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Iodpfx Anji Huzxewoth Very good condition

Condition: good (used), approx. 40,000 pieces, SSI Schäfer, CONICAL, stackable reusable container KMB B632, with handle, 56 l - used - : Price per piece from location for truck acceptance (approx. 2,640 pieces): 7.- (net) Price per piece from location for complete acceptance: 5.- (net) We reserve the right to a minimum order quantity! When in use, the boxes are stackable if the handles are folded out - when the handles are folded in, the boxes can be stacked inside each other (nesting) to save space! Manufacturer: SSI-Schäfer Type: KMB B 632 Year of manufacture: unknown Dimensions: Weight: approx. 2.5kg Color: blue Isdpfevxxblox Anwoth Height in a stack of 10. Nested, approx. 1.05m high New price approx. €35 (net) / piece • External width [mm] 399 • External height [mm] 323 • External length [mm] 607 • External dimensions L x W x H [mm] 607 x 399 x 323 • Version with handle • Base construction closed • Width [mm] 399 • Lid No • Handle ergonomic handles • Height [mm] 323 • Content [l] 56 • Foldable No • Length [mm] 607 • Material Polypropylene (PP) • Material type Plastic • Nestable Yes • Surface smooth • Recyclable Yes • Stackable Yes • Wall construction closed Per pallet: at least 80 boxes Condition: good and clean, printed with customer logo Available: immediately Location: Munich These containers impress with their versatile uses in The containers are the ideal alternative to cardboard or film packaging that is prone to damage, and their reusable system protects our environment and natural resources. The containers can also be stacked inside each other when empty, saving up to 75% of transport volume.

Condition: excellent (used), Year of construction: 2004, Gofa semi-trailer cryogenic for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Working pressure: 3 bar Volume: 12000 L We have also other tankers for LIN, LOX, LAR, LNG und CO2, argon, oxygen, nitrogen and carbon dioxide. Itodpfx Aerk Na Aenwoh We will be glad to answer your questions via phone and e-mail

Condition: used, maximum load weight: 30,920 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, BENALU Jumboliner Moving Floor Trailer 90.1 m³ * 90.1 cubic meters * SAF axles * 1st and 3rd axle liftable * Alloy rims * Air suspension * Pneumatic controls * Disc brakes * Sliding tarpaulin Itsdsy R Ipzepfx Anwoh * Side protection tarpaulin * Smartboard * Double-wing rear door with swivel rod locking * Access ladder and platform at the front wall * ABS connection * 2 x 7-pin power connectors * ISO air connections with red and yellow coupling heads * 21 boards * Service hatch on the front wall * Load pressure gauge * 1 x hydraulic connection on the front wall * 1 x hydraulic connection below between the landing gears Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. Some inaccuracies may result from data transmission issues between various platform providers. Therefore, all information is supplied without guarantee and does not constitute a legal claim. Legal Notice: This sales listing does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information intended to initiate contract negotiations. The information provided here is non-binding and does not constitute guaranteed properties.

Condition: good (used), ET332MCplus TCM 'Bar/BigBore' Siemens R2Z170 PC KEYBOARD S6Z460 MACHINE INSTALLATION AND MOUNTING MATERIAL PARTS CATCHER DEVICE X1Z100 INTERFACE FOR EXTERNAL LOADER Alarm lamp CLEANING GUN CHIP CONVEYOR 1200 MM R2Z450W Cut-off Tool Holder SGFH 26 VDI25 M3 - M4 R2Z410W Facing and Longitudinal Turning Holder M4-Left VDI25 R2Z420W Facing and Longitudinal Turning Holder M3-Left VDI25 R2Z310W Universal Internal Tool Holder VDI25 S4Z910 EMCO TOP LOAD 8-42/3200 MULTI LEVEL INCL. EMCO BAR LOADER INTERFACE + Various tool holders Itsdpfx Anjy Shy Njweh

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 Itodpeya I Sgjfx Anweh VERSION 400 YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Manufacturer: Speidel Tank and Vessel Construction Year of manufacture: 2020 Technical specifications: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket/insulation jacket) Internal surface: suitable for food/pharmaceutical use Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Legs: height adjustable Application: The tank is ideally suited for the storage of pharmaceutical, cosmetic, or food-grade liquids. The tank was used as a CIP vessel in a pharmaceutical facility and was operated under hygienic conditions accordingly. Typical applications include: Itjdpjy I Skwefx Anweh - Intermediate storage of bulk goods - CIP feed tank - Storage of alcohol, cleaning, or disinfectant solutions - Process integration in filling lines Construction: - Premium stainless steel construction (316L) - Insulated tank for temperature-controlled processes - Hygienic design with clamp fittings - Conical bottom for complete residue drainage - Industrial-grade build from German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operation manual available - Manufacturer documentation included Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operation manual - Nameplate present Special features: - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as a CIP feed or buffer tank - Compact design with high quality

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically Isdpoilg Hdsfx Anwjth after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: excellent (used), GRANULATE DEDUSTING We have 5 units available from a company liquidation. Itedpfx Asy N R Nbonweh Granulate dedusting machines reliably minimize quality risks. The granulate deduster effectively removes fine dust, ensuring a clean and high-quality plastic granulate. This helps you reduce scrap, prevent production disruptions, and maintain consistently high product quality.

Condition: used, functionality: fully functional, Various used TANK CONTAINERS available for pickup “free loaded from depot” ⚡️ Fast delivery also possible including unloading · Please provide postal code for a non-binding offer Typical liquid products transported Chemicals / Solvents Water Isdpfx Ajy Ihufonwjth Oils Slurry / Liquid manure Waste liquids Biodiesel Technical data: • 24,000 - 31,000 litres • Certification: UN T11 and/or ADR/RID L4BN • Stainless steel DIN 1.4404 • 6 bar test pressure, 4 bar working pressure, 0.41 bar vacuum • Full walkways with handrail • New 5-year inspection upon request (at extra cost)

Condition: excellent (used), Year of construction: 1990, Aurepa gas tank semi trailer for oxygen, nitrogen, argon cryogenic Technical Information: Working pressure: 3 bar Pump: yes Flowmeter: yes Itjdpjittfnefx Anwoh We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us via e-mail.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA Itjdpsxgua Aefx Anwjh 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Iedpfx Asxgumcenwsth Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Iedpfx Ash Dxqvjnweth Water Disinfection Equipment Inclusive pumps, Control and other accessories. Nice condition