Used A. Cremona Peeling Line for sale (73,139)

Condition: excellent (used), Compact High Speed Planing Line Mechanisation with Stacker 1. Weinig EM814 moulder infeed with flat chain feeder 2. Weinig 820 high speed right angle moulder outfeed with cross feed sweepers 3. Weinig 811 board stacker with scissors lift (chain feed discharge options) -Boards are automatically transported laterally with the Weinig 820 right angle transfer. -Boards automatically form a layer and are then placed on the lifting table of the chain conveyor Laodpfx Asxb U Txom Nsa -The completed pack is transferred to the following chain conveyor -Maximum output: 40 cycles/minute for stacker (over 150m/min based on average length boards). -Space required: Length approx. 8000 mm, Width approx. 5000 mm approximately -Pack size max 6100mm x 1200mm x 1200mm(high) 3. Weinig cross chains after scissors lift to move full packs away from the stacker when full. Possible to supply with Weinig Hydromat moulders 100m/min as needed.

Condition: good (used), Year of construction: 2004, machine/vehicle number: 300 584, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 400 V, input current: 85 A, type of input current: three-phase, overall weight: 8,000 kg, year of last overhaul: 2016, We are selling a complete shredding line including: - Artech RS75 shredder - Pusher / compactor - Electrical control cabinet - Overband magnet - Sampler Ljdpfoxrtwwex Am Neaa The loading conveyor and the discharge conveyor after shredding are not included in the sale.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. Lajdpfx Amexf Hm Se Nsa In good working condition. Inspection is possible by appointment. Available: NOW

Year of construction: 2013, operating hours: 20 h, condition: as good as new (ex-display), functionality: fully functional, Processing line for stone fruit. 3 times used only. -Conveyor belt -Destoner 3000kg/h -Pulper - turbo extractor -Screw conveyor -Stone cleaning extractor Lsdpfx Amjrqzy Sj Nsaa -Central command unit -Dearator -Heat exchanger

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 23-034, total width: 1,100 mm, total length: 4,570 mm, total height: 2,060 mm, A packaging machine from the company Smartvac which was exhibited at trade fairs. - Bottom film width: 320(+2/+4) mm - Top film width: 302(+/-1) mm - Peel length: 220 mm Lasdpeq H R Taofx Am Noa - Deep draw: 100 mm - Machine design for vacuum packs Maximum pack size: 281 x 202 x 100 mm

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Lodpfoyghwcox Am Njaa Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 Lsdpfx Amjwplgbe Neaa 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: excellent (used), Acemal waffle production line. Comprising divider, proofer, hot plate oven and cooling spiral. Bought new in 2015 and hardly used. From 2,000 Liège waffles per hour. Ljdoxnqtzjpfx Am Neaa

Condition: new, functionality: fully functional, machine/vehicle number: NM0LKTP62BSR94836, mileage: 1,000 km, power: 389.81 kW (529.99 HP), fuel type: electric, empty load weight: 12,827 kg, maximum load weight: 14,173 kg, overall weight: 27,000 kg, tire size: 315/70 R22.5, tire condition: 100 %, axle configuration: 6x2, wheelbase: 4,750 mm, axle spacing: 1,350 mm, fuel: electricity, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 3, emission class: none, suspension: steel-air, number of seats: 2, total length: 10,530 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space volume: 52 m³, loading space length: 8,300 mm, loading space width: 2,480 mm, loading space height: 2,533 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, central locking, cooling unit, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, non-smoking vehicle, onboard computer, power mirror, retarder, seat heater, tachograph, tail-lift, tire pressure monitoring, traction control, NM0LKTP62BSR94836 - Reference 85231 - Warranty 2+0 years - High-voltage battery warranty 8 years or 400,000 km STANDARD EQUIPMENT: 2,470 Nm torque ▪ Continuous Power 310 kW (421 HP) ▪ Peak Power 390 kW (530 HP) ▪ 8T Front Axle Capacity ▪ 11.5T 2nd Axle Capacity ▪ 7.5T 3rd Axle Capacity ▪ 6-Bag Rear Air Suspension (C6AS) ▪ Disc Brakes Front and Rear ▪ Regenerative Braking Power 390 kW ▪ 4 Battery Packs – NMC ▪ Installed Battery Capacity 392 kWh ▪ Usable Battery Capacity 314 kWh ▪ Charging Type CCS2 – DC Charging – Up to 285 kW, 350A ▪ U-profile Chassis, High Strength, 7mm Thick ▪ 315/70 R22.5 Tyres ▪ 22.5x9.0 Steel Wheels ▪ Pre-Collision Assist ▪ Lane Keeping Alert (LDWS) ▪ Electronic Stability Program (ESP) ▪ Driver Alert System ▪ Moving-Off Information System (MOIS) ▪ Reversing Camera ▪ Blind Spot Information System (BLIS) ▪ Alcohol Interlock Preparation ▪ Traffic Sign Recognition ▪ Emergency Stop Signal ▪ Tyre Pressure Monitoring System (TPMS) ▪ Automatic High Beam ▪ Pre-Collision Assist with Pedestrian Detection ▪ Intelligent Adaptive Cruise Control with Stop & Go (iACC) ▪ EBS: Electronic Braking System with ABS & ATC (Automatic Traction Control) ▪ Differential Lock ▪ Multimedia System with 9” Touchscreen (DAB Radio, Bluetooth, USB (A-Type – C-Type), Apple CarPlay, Android Auto, Remote Control) ▪ Navigation ▪ Enhanced Sound and Thermal Insulation ▪ Air Conditioning ▪ High Voltage Water Heater (Wet Type) ▪ Axle Load Meter (air suspension only) ▪ Adjustable Steering Wheel ▪ Seatbelt Warning ▪ Electric Windows ▪ Air Suspension Height Adjustment via Remote Control ▪ Tinted Side Windows ▪ Premium Seat Fabric ▪ 2 Multifunction Keys with Remote Control ▪ Heated and Electric Side Mirrors ▪ Sideskirts ▪ 4-Point Independent Cab Suspension ▪ Power Distribution Unit ▪ Electrically Tilting Cab ▪ Rain Sensor: Automatic Wipers & Lighting ▪ 95Ah AGM Battery ▪ Electric Air Brake Compressor ▪ Smart Tachograph ▪ Medium Bumper OPTIONAL EQUIPMENT: Ljdpfx Aex Uzdgom Noaa Steerable Rear Axle ▪ 4,750 mm Wheelbase ▪ Aluminium Alcoa Wheels ▪ Spare Wheel ▪ LED Headlights ▪ Frigo Pack ▪ Side Protection Rails ▪ Refrigerated Truck Body by Carrosserie Matthys: Internal Length 8,350 mm; Internal Width 2,460 mm; Internal Height 2,530 mm; with LL2d and LL1d evaporator; Dhollandia underfloor liftgate 2T; Multi-temp, reinforced roof, side wall drainage; movable and foldable partition wall, with anti-compression hatch; side door in right wall, near the front, opens rearwards, 1000 x 2130 mm, with retractable step Discover our dealers via the website fordtrucksbelux.be Interested? Please feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl - Garage O.C.M. Srl - GTTS Jourdan SA - Herman Noyens Trucks NV - Marc Vansteenland BV

Condition: new, functionality: fully functional, machine/vehicle number: NM0LKXTP6LRC90705, mileage: 1,000 km, power: 242.71 kW (329.99 HP), fuel type: diesel, empty load weight: 12,428 kg, maximum load weight: 12,572 kg, overall weight: 25,000 kg, tire size: 315/80 R 22.5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 4,250 mm, axle spacing: 1,350 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 9,397 mm, total width: 2,550 mm, total height: 3,815 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, loading space length: 6,906 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, non-smoking vehicle, onboard computer, power mirror, seat heater, soot filter, spoiler, tachograph, tail-lift, tire pressure monitoring, traction control, NM0LKXTP6LRC90705 – Reference 78819 – Warranty 1+1 year STANDARD EQUIPMENT: Air conditioning ▪ Multimedia system with 9" touchscreen & navigation (Radio, Bluetooth, USB (A type - C type), Apple CarPlay, Android Auto, remote control) ▪ Cruise control ▪ Differential lock ▪ Disc brakes ▪ Engine brake ▪ Electronic Braking System (EBS) and Anti-lock Braking System (ABS) ▪ Electronic Stability Control (ESP) ▪ Hill Launch Assist ▪ Electrically operated windows ▪ Electrically adjustable and heated side mirrors ▪ Height and tilt adjustable steering column ▪ Electrically operated headlamp leveling ▪ Heated and air-suspended driver's seat ▪ Lumbar support ▪ Brake pad wear sensor ▪ Immobilizer ▪ Automatic light sensor ▪ Home safe light ▪ Approach light ▪ Front fog lights ▪ Digital tachograph ▪ Spare wheel ▪ Liftable rear axle (Auto drop function) ▪ DAB radio ▪ Advanced driver assistance systems (enhanced cybersecurity, rear view camera, departure information system, blind spot information system, tire pressure monitoring system, emergency stop signal, alcohol interlock facilitation, traffic sign recognition, driver alert system, lane keeping alert, pre-collision assist) ▪ Manually operated sunroof ▪ Single key with remote control and central locking ▪ Automated transmission (with various operating modes) ▪ Convertible air compressor (for improved fuel efficiency) ▪ Axle load indicator ▪ Rear fog lights ▪ 4-point independent cab suspension OPTIONAL EQUIPMENT: Technology Package 3: Automatic high beam headlights, Pre-collision assist with pedestrian detection ▪ Steerable rear axle ▪ Driver's seat armrest ▪ Front towing eye ▪ 8T front axle ▪ Electrically tiltable cab ▪ Window in rear cab wall ▪ PTO - NH4C ▪ LED headlights ▪ 4.375 FDR ▪ 315/80 Pirelli tires ▪ Distribution truck with tail lift up to top and side loading door – distribution version with tie rails – internal load bed length 6800 mm – internal load bed height 2.40 m – internal width 2.46 m – D'hollandia 2.40 m tail lift with 2,000 kg capacity – roll stops on the tail lift – tie rails in sidewalls – 1 side door – side underrun protection Discover our dealers on the website fordtrucksbelux.be Interested? Please feel free to contact your nearest Ford Trucks dealer. - ACB Motors BV Ljdpfx Asx Uqz Uom Njaa - AD Services Srl - CTSL BV - Eeckhout Cardoen BV - Garage De La Vierre Srl - Garage O.C.M. Srl - GTTS Jourdan SA - Herman Noyens Trucks NV - Marc Vansteenland BV

Year of construction: 2003, condition: used, functionality: fully functional, CONTINUOUS HUMP BACK BRAZING LINE FOR STAINLESS STEEL TECHNICAL INFORMATIONS: - Type: Hump Back Mesh Melt Continuous Furnace Line - Process : Brazing (Stainless steel) - Total Length : 28.800mm - Heating Zone : 5200mm - Band width : 650mm - Band speed : Max. 1200mm/min Laedjx Ux Sbepfx Am Nea Min : 100mm/min - Capcity : 420kg/h netto - Heating : With Natural gas - Total Heating Power : 400kW Brut - Heating Elements : x10 WS Burners - Controlled zone : 4 - Max Temp. : 1130 C - Athmosphere : Nitrogen / Hydrogen - Control : Demig / Siemens

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables Lsdpfxox Up Ige Am Neaa (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: new, Year of construction: 2025, operating hours: 1 h, Standard equipment red line Optical precisions drill point grinding machine for 2 fluted drills regrinding and point splitting in one chucking diameter range 2 to 16 mm (1 to 20 mm as option) point angle 80° - 150° infinitely adjustable cutting angle 0° - 20° infinitely adjustable relief angle set to 30° incl. complete electrical instalation with single phase electrical motor 0,3KW 115V 60Hz (or 220V 50Hz) and integrated power-supply for illumination of the optical system incl. built-in optical projection system with 10 power lens (zoom lens with 6 - 20 power as option) Laodpfebrpr Ujx Am Noa incl. integrated point splitting device incl. one precision collet holder and one set of double-tapered precision-collets of your choice (MP 16 for drill-dia. 3-16 mm, MP 6,5 for drill-dia. 1-6.5 mm or MP 20 for drill-dia. 6.5-20 mm) incl. 1 double sided grinding wheel dia. 125mm CBN (one side coarse [grit ~100] second side medium [grit ~200]) incl. wheel guard with connection system for vacum cleaner incl. 1 each of detailed operating manual with pictures, spare parts list, CD-Rom and CE-Declaration (on demand)

Condition: new, Year of construction: 2025, machine/vehicle number: 2024, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life Laodpfx Ame R R R Ss Nea - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: excellent (used), functionality: fully functional, Frey F-Line F223, C-Line, Thom Multi-Line-Loader, Multivac R 530 Vacuum Filling and Packaging Line Ledpfjyc N Hdsx Am Nsaa The line consists of: 1. Frey F-Line F223 Vacuum Filler with 200 l Bin Lifter Manufacturer: Frey Maschinenbau GmbH Model: F-Line F223 Machine Number: F223T1204018 WK Year of Manufacture: 2018 Power supply: 400 V, 50/60 Hz Power: 5.5 kW Dimensions: 2050 × 1350 × 2500 mm 2. Frey C-Line Portioner Manufacturer: Frey Maschinenbau GmbH Model: C-Line Machine Number: CLB 1191638 Year of Manufacture: 2018 Power supply: 400 V, 50/60 Hz Power: 7 kW Belt: plastic Belt width: (2×) 290 mm Working width: 155 mm Clearance: 290 × 30 mm Dimensions: 1900 × 1200 × 1400 mm Included equipment: Wolf head system, type WK132, Ø 95 mm Portioning device, Ø 75 mm, working width 160 mm 2 stainless steel trolleys with parts trays: 710 × 500 × 1015 mm 960 × 660 × 1035 mm 3. Thom Multi-Line-Loader Shuttle Conveyor (2 pcs) Manufacturer: Thom Maschinenbau GmbH Model: Multi-Line-Loader Machine Number: 72392-001-00 Year of Manufacture: 2018 Power: 19.75 kW Belt: plastic Conveyor 1: Belt width: 250 mm Dimensions: 2800 × 800 × 1650 mm Conveyor 2: Belt width: 650 mm Weight: 1360 kg Dimensions: 2650 × 1200 × 1250 mm 4. Multivac R 530 Thermoforming Packaging Machine Manufacturer: Multivac Model: R 530 Serial Number: 398 Year of Manufacture: 1994 Power supply: 380 V, 3 phase, 50 Hz Current consumption: 31 A Power: 14 kW Film width: (6×) 465 mm Mould size: 175 × 125 × 45 mm Equipment: Inliner Plastic belts (3× 110 mm) Plastic mesh belt, 480 mm Film waste suction device (Ø 60 mm × 1110 mm) Dimensions: 9400 × 1150 × 2000 mm 5. Trolley with Vessel and Pump Pump model: TR20 PTT Serial number: 2009 2077 Year of manufacture: 2020 Pump: Tapflo Vessel dimensions: Ø 550 × 1000 mm Complete line for vacuum filling, portioning, and packaging of meat products. The set enables efficient processing of fillings and minced meat—from stuffing and portioning, through transfer, to automatic thermoform packaging. The line, based on machines from renowned manufacturers Frey, Thom Maschinenbau, and Multivac, ensures high output, precise dosing, process repeatability, and full integration options for industrial production lines.

Condition: new, mileage: 1,179 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 62, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,960 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = - Retarder - Webasto = Further Information = Damages: none = Company Information = Lsdsxu Nb Repfx Am Njaa We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: good (used), Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm Laodor H Nllopfx Am Noa -Weight: 0.5 kg

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. Lajdsycfw Eopfx Am Nja This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Line for packaging multiple denominations in one bag (up to 8 different ones). It consists of 8 stations. Each station has a container for denominations that are brought to the counters by conveyors. At each station, the counter counts the set amount of denominations and prepares them in a tube. At regular intervals, the tubes are opened and the denominations are moved into the bag. The bag is then closed by thermal heating of the edge. The line is also equipped with a printer that allows printing on the bags as desired. Laodpsvt Sp Sjfx Am Noa Please contact us for more technical details. L x W x H - 5000 x 5000 x 2700 mm

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm Lasdpfsxmvm Rjx Am Nja OUTFEED CROSS TRANSFERS T13

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 Laedpfxevkphge Am Noa max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: used, Automatic lattice girder welding line TE 30 S made by EUROLLS Model : TE 30 S Maximum stacking height : 500 mm Wire diameter - Upper current (ds -smooth or barbed) : From 4 to 12 mm - Lower current (di- smooth or barbed) : From 4 to 12 mm - Diagonal wire (dg- smooth or barbed) : From 3 to 8 mm Diagonal pitch (P) : 200 mm Beam pitch : 400 mm Maximum speed with hot and cold drawn wire : Max 30 m/min Lajdpfx Aevtqacjm Noa Maximum spool weight in feed : 3000 kg Machine type: TE 30 S Maximum stacking height: 500 mm Wire diameter Upper current (ds -smooth or barbed): From 4 to 12 mm Wire diameter Lower current (di- smooth or barbed): From 4 to 12 mm Wire diameter Diagonal wire (dg- smooth or barbed): From 3 to 8 mm Diagonal pitch (P): 200 mm Beam pitch: 400 mm Maximum speed with hot and cold drawn wire: Max 30 m/min Maximum spool weight in feed: 3000 kg

Year of construction: 2016, condition: used, MEP cutting & bending machine, SYNTAX 28 Lodpfoxl Avvox Am Nsaa Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: up to ∅20 mm (#6) • Bar presence detector • Multifunction feeding: gripper and feed rollers • Dual shears • Bending pins accordingly to international rules Video disclaimer: This video is the manufacturer's promotional demonstration for the SYNTAX 28 model. It does not show the specific line currently for sale. Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: Up to ∅20 mm (#6)

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Lodpewu Dcxsfx Am Neaa Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, feed length X-axis: 3,000 mm, Equipment: CE marking, The Störi Mantel Leg Machine is an automatic device for producing the bottom parts of wooden pallets, also known as pallet bases or legs, which operates on the proven principle of electromechanical nailing. Laedpjubbu Uofx Am Nsa The main key features that will increase your production capacity, save on operational and personnel costs, and speed up the entire pallet nailing process include, for example, the production cycle speed, the possibility of integration with other equipment such as a cross-cut saw or pallet nailing machine, convenient operation of the entire machine by a single operator, and easy maintenance and servicing. The Leg Machine can be designed with a maximum leg length of 1 500 mm or 3 000 mm.