Used Bean Calibrator for sale (1,064)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,860 kg, maximum load weight: 33,140 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, saddle, container Fine-grained steel welded construction, saddle plate with 2 interchangeable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage 1 x 45 ft with gooseneck tunnel and rear overload Middle telescope, 2nd stage, front extension extended, 1st stage Rear extension extended, 2nd stage 1 x 45 ft with long gooseneck tunnel and angled corners Middle telescope as an interlocking central tube frame with pin locking without height adjustment at the rear and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connecting plate for electrical, air, and brake connections Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support winch, single-sided operation Retractable underrun protection for 45 ft containers Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reducing tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons total vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, actuation 3x brake Brake system 2-line pneumatic brake system, color-coded lines for easy servicing Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 keyed coupling heads at the front, without connection cable EBS, electronic brake system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units which ensure the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, 4 x 3-chamber lights + 1 round reversing light and + 1 round rear fog light, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin keyed sockets at the front, without connection cable Operating instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear of the vehicle and the total vehicle length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / signs Germany Test approval according to EC 2007/46 24/7 service hotline Hnodpei Ri E Aofx Ap Hon prepared for license plate holder, single-row Warning sign according to ECE - 70 Contour marking

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, saddle, and container Fine-grained steel welded structure, saddle plate with 2 interchangeable kingpin and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft or 1 x 30 ft flush at the rear Middle telescopic extension, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Hnedpei Ri Exsfx Ap Hsn Middle telescopic extension, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel and overloaded towards the rear. Middle telescopic extension as an interlocking central tube frame with pin lock with height adjustment at the rear and foldable center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension on roller bearings, with hand crank 24 tons, 2-speed support winch, one-sided operation Underrun protection extendable for 45 ft containers Half-shell mudguards with anti-splash flaps according to EG Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axle offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on the instrument panel in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame, front section + rear extension hot-dip galvanized Rear area DB 7350 Novagrau - 10-year warranty against rusting or hot-dip galvanized - 15-year warranty against rusting

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,500 kg, maximum load weight: 33,500 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with 2 interchangeable kingpins and 2 kingpin positions Container receptacles: 1 x 20 ft in the center without steel/non-slip flooring in the rear area 2 x 20 ft or 1 x 40 ft with gooseneck tunnel without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support 2 chocks with holder Aluminum side guard Galvanized steel underrun protection Half-shell fenders with anti-spray flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total vehicle weight Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the screen in the driver's cab, the truck must be suitably prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! With certain tractor units, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched on via the reversing light Operating instructions Hnedpfx Aoi Riv Nop Hjn Note: Transport of filled tank containers is not permitted! Country of registration / signs Germany with Dekra approval and certificate (according to §13 EG - FGV) prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau - 10 years guarantee against rust or hot-dip galvanized - 15 years guarantee against rust Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: excellent (used), Catalogue number: 7808 TECHNICAL DATA Hnodpfxezcd Ame Ap Hjn Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, saddle, and container Fine-grained steel welded construction, saddle plate with 2 replaceable king pins and 2 king pin positions Container receptacles: Included Rear extension retracted: 1 x 20 ft, flush at the rear; note: low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with gooseneck tunnel and overhang to the rear Without height adjustment at the rear and without folding center supports; transport of containers without a tunnel is not possible. Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use. Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support legs, single-sided operation 2 support wedges with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders included With anti-splash flaps according to EC Rear impact protection Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons total weight Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist; activated by 3x brake (starting assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded lines for easy maintenance 200 spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by tractor units that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the cab; truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! With certain tractor units, false diagnoses may occur, although the function is present) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hsdpji Ri Eqjfx Ap Honn Operating instructions When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from king pin to the rear of the vehicle and the total length of the combination of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration/signs Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for license plate holder, single-row 390 contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame hot-dip galvanized incl. passivation 15-year warranty against rust-through Support legs black coated

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with 2 interchangeable kingpins Container mounts: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload Transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Semi-fender with anti-spray flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure on the EBS module, located externally. Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, brand at manufacturer's discretion Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the sides (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Hedpfsi Riwmox Ap Henn Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau, 10-year guarantee against rust penetration Support legs black coated without pallet box paint Note: Archive images!

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar Hedpfox Nf Tbex Ap Hjnn x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland Hedpfozdaxyox Ap Honn

Condition: as good as new (ex-display), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, We offer for sale a powerful Stäubli TX200 industrial robot that has undergone a thorough diagnostic test by the Stäubli service team. The test results confirmed that the robot is in the current condition of a new machine, with only 400 engine hours. The service log is available in PDF format for more detailed viewing. Technical Specifications: Nominal load capacity: 100 kg Reach between axis 1 and 6: 2194 mm Repeatability (ISO 9283): ± 0.06 mm Maximum speed at the center of gravity of the load: 12 m/s Standard for clean rooms (ISO 14644-1): 5 Protection class (wrist): IP65 (*67) Equipment and features: Control unit: Stäubli CS8 series CS8C HP Digital inputs/outputs: 16/16 Connecting cable: 10m long WMS Mode Selector and Control Panel SP1 Docking station Components and interfaces: Pneumatic system: 2 solenoid valves in 5/2-way monostable variant and 3 direct lines between base and forearm. Electrical system: 1 socket with 19 contacts (7 twisted pairs including 2 shielded, 3 power contacts). Expansion option: Ethernet 19-pin cylindrical connector with 5 twisted pairs and 3 power contacts. Hnjdpfxonncalj Ap Hon This robot is ideal for precision applications, including machining, thanks to its calibration and powerful features. It is fully equipped and ready for deployment in industrial environments.. For more information or a tour, do not hesitate to contact us. We look forward to your cooperation.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase Equipment: Lighting, documentation/manual, nameplate available Details of the offer Hnjdpfxeyr Sims Ap Hjn Description Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in two belt version immediately available - ex stock 54634 Bitburg Technical data Hsdpfx Apjcr S Ecs Henn grinding width 1100 mm Min. / max. working height 4 /170 mm Sanding belt width 1115 mm grinding belt length 1900 mm feed speeds 4,5 / 9 m/min feed motor 0,33/0,55 kW Table adjustment motor power 0,25 kW Drive motor power 11 kW Electrical voltage 400 V Phase(s) 3 Ph Mains frequency 50 Hz Length 1650 mm Width/depth 1820 mm Height 1960 mm Illustration with optional equipment Wide belt sander as double belt version up to 1100 mm with many equipment options for the price-conscious craftsman's workshop Robust tube-stiffened monoblock steel machine body with working units mounted high up for maximum rigidity User-friendly due to clear control panel on the front side Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start for main motor Natural rubber feed carpet with negative profile Support table with two rollers in the infeed and outfeed of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front and behind each working unit Pneumatic belt tensioning for each unit with decimal correction possibility of the core/ belt strength Quality - Made in Europe Execution RTC 1. aggregate with bevelled steel roller Ø 120 mm and fine adjustment for calibration 2. aggregate combination aggregate with fine adjustable working height for calibrating and fine grinding with rubber coated roller Ø 120 mm (45 Sh) and hard grinding shoe with graphite coating on exchangeable insert Scope of delivery: Working table height adjustment with electronic display of working height. Oscillation of the sanding belts with electronic system Rubber coated grooved pressure roller at the infeed 1° position with anti-reverse device (C.E.) Star-delta start-up of the main motors Grooved steel calibration roller Selector switch for positioning the grinding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic carpet centering Location: Ex stock Bitburg - at special price

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available Hsdpfsx N A Aaex Ap Hjnn - Free loaded

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel Hnedpegf Sw Nefx Ap Hon - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: used, Year of construction: 2020, Suitable for automatic grinding of tooth faces and tooth backs on carbide-tipped circular saw blades. Accessories: Total enclosure, Device for central coolant supply with coolant pump 160 l/min, Manual fire extinguishing system, Electrostatic mist extractor, Motorized adjustment of rake and clearance angles, Standard software package for tooth geometries according to the program overview, Automatic central lubrication, 1 feed pawl pin ø 3 mm, 1 mounting arbor Ø 10 mm for circular saws Ø 80 mm - 220 mm, 1 grinding wheel mount for face grinding, Hjdpfxjza Egze Ap Henn 1 grinding wheel mount for top grinding, 1 set of calibration tools. Circular saws outside diameter: 80 to 650mm sheet thickness: < 5mm Blade thickness: < 5mm Tooth pitch: 6 to 100mm rake angle: - 10° to + 30° radial relief angle: - 0° to + 6° tooth height difference: any Grinding wheel diameter: 125 mm Centrebore diameter: 32 mm Connected load: (400V / 50Hz) mass: approx. 1058 kg Dimensions L x W x H: 1502 x 960 x 1900mm colour: Grey RAL 7045 / 7047

Condition: excellent (used), Year of construction: 2020, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 808482, Excellent condition 2020 Rollomatic ShapeSmart NP50 CNC pinch & peel grinding machine. Fully operational and under power. Includes latest software package, Comat coolant filtration/temperature control system, Marcus checking system, loader pallet sets, ultra precision collets, grinding wheels, tooling and accessories. Immediate availability, inspection and demonstration welcome by appointment. The high-speed tool loader, designed by Rollomatic and integrated into the basic machine, was developed with fast setup and ease-of-use in mind. This is achieved by using pre-calibrated cassettes and clamps to hold different diameters without resetting the position. Rollomatic automatic loaders are known to be the fastest and most reliable in our industry. Fast to set up Capacity up to 1’000 parts Robust, low maintenance design Checking and measuring the part immediately after machining is essential to guarantee the quality of the production. The post-process measuring system immediately transmits the compensation value that may be necessary to achieve production within the planned tolerances. Accuracy & reliability Compensation of the grinding wheel position Constant production quality The Smart Touch Probe is a contact measurement system that allows the blank position to be defined before grinding and avoids variations during production. The system also compensates for machine thermal drift caused by changes in ambient temperature. Runout compensation and core diameter measurement Setting assistance Superior stability during the production process Hodpfx Apjy Udwvo Hsnn Elimination of scrap during unattended production The StickSmart® is an automatic sticking system for in-process cleaning of grinding wheels. The «stick», mounted in a holder, is used to regenerate superabrasive grinding wheels to maintain their cutting performance. Extends the working life of the wheel Extends unattended production cycles with high-performance wheels Reliable and safe automatic process for the operator. Efficient, economical and safe solutionSimple and efficient, the right-side door has been designed to facilitate the work of the operator when changing the orientation of the grinding wheels. Ergonomics for the operator Secure opening Guaranteed tightness

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,100 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, table length: 4,000 mm, table width: 2,000 mm, spindle speed (max.): 22,000 rpm, torque: 128 Nm, spindle nose: 63, CNC Heidenhain iTNC 530 S.P. WORKING AREA Longitudinal X-axis travel: mm 4.000 Transversal Y-axis travel: mm 2.200 Vertical Z-axis travel: mm 1.100 Maximum speed with interpolating axes: m/min 50 WORKTABLE Dimensions: mm 4.000 x 2.000 Height: mm 300 Load capacity: T/m² 15 T-slots for workpiece clamping mm 28 DIN 650 (H12), complete with leveling elements. T-slot direction parallel to X-axis movement. AXIS CHARACTERISTICS Axis feed rate: mm/min 50.000 Acceleration: m/s² 4 WORKING AREA (CLEARANCES) Maximum horizontal clearance: mm 3.200 Maximum vertical clearance under crossbeam: mm 1.926 Height of worktable from floor: mm 330 CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE Automatic universal head indexed to 360,000 positions (every 0.001°). Rotation is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows 10° undercut machining. Internal cooling system for bearings and axis motors. B-axis rotation range: ± 185° A-axis rotation range: ± 185° Maximum axis rotation speed: rpm 30 Maximum torque available on A/C axes: Nm 450 Axis clamping torque: Nm 1.400 Spindle power (S1/S6): kW 22/33 Spindle torque (S1/S6): Nm 84/128 Maximum spindle speed: rpm 22.000 Tool interface: HSK-A63 DIN 69893 The head is supplied complete with a cradle for handling and storage. The cradle is used outside the working area and therefore does not reduce the machine’s actual working capacity. CHAIN TOOL MAGAZINE – 30 POSITIONS (HSK) 30-position automatic chain tool changer located at the rear side of the working area, fully protected from dust and chips. Tool type: HSK-A63 DIN 69893 Max tool diameter (adjacent pockets occupied): mm 90 Max tool length: mm 300 Max tool weight: kg 10 Hodpfx Aezb Evljp Henn MEASURING SCALE PRESSURIZATION Pneumatic system complete with control unit for pressurizing the measuring scales. SPRAY-MIST TOOL LUBRICATION/COOLING Mist lubrication system. The mist is generated by mixing air and oil and is controlled via M-function. The spray-mist improves cutting quality, prevents built-up edge formation, keeps the cutting area clean, and provides cooling. Highly effective for improving surface finish quality. EXTERNAL TOOL COOLING Coolant distribution system controlled by the CNC, with nozzles positioned on the flange around the spindle. Complete with a tank (1,200-liter capacity) for coolant collection and filtration. Flow rate: 30 l/min, pressure: 4 bar. REQUIRED CONNECTIONS Maximum installed power: kW 150 Maximum current required: A 235 MACHINE EQUIPPED WITH: • Heidenhain HR550 remote electronic handwheel • Various tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning unit • Cooling system for all axes and the electrospindle • No. 2 chip conveyors positioned on both sides of the worktable • User and maintenance manual and CE declaration of conformity

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM10 Force: 10 kN Crosshead stroke: 700 mm Test area: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for 'quick tests' without the need for a PC. For tests requiring data storage and curve recording, the basic software provides full control and evaluation capabilities. It allows you to generate various test sequences and create test reports. In addition, you have the option to further process the raw data in your own programs. Options: - Delivery and commissioning Hsdpfjyc U Ugsx Ap Hsnn - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips and Fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Year of construction: 2026, condition: as good as new (ex-display), Universal Testing Machine PM5 Force: 5 kN Traverse Travel: 520 mm Working Depth: 66 mm Overall Height: 1036 mm Weight: approx. 48 kg Position Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 5 kN Incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, enabling “quick tests” without the need for a PC. For testing procedures requiring data storage and curve recording, our basic software provides both control and evaluation functions. Hodpfx Apoydanhe Henn This allows you to generate different test sequences and create a test report. In addition, raw data can be further processed in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PM3, Universal testing machine PM3 (2026) Force: 3 kN Crosshead travel: 520 mm Working space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Displacement resolution: 0.01 mm Testing speed: 1-500 mm/min Cc7d2rmq Return speed: 700 mm/min Load cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for a “quick test” even without a PC. For tests that require data storage and recording of the curve profile, we offer the option to control and evaluate the tests using the basic software. Hsdpfxoyc U Dbe Ap Henn This allows you to generate various test sequences and create a test report. Furthermore, you have the option to process the raw data in your own programs. Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping devices: Pressure plates, bending fixtures, shear fixtures, wedge clamps, scissor clamps, peeling clamps, screw clamps, pneumatic clamps, and hydraulic clamps.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm testing speed: 1-500 mm / min Hnodpfx Apefdzupj Hon Cc7d2rmq Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal testing machine PM3 Force: 3 kN cross beam stroke: 520 mm Working area depth: 66 mm total height: 1036 mm Weight: ca.40 Kg Travel resolution: 0.01 mm Hnedpfx Apsd R Dpuo Hon testing speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 3 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keyboard, so that a "quick test" can be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This allows to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamps: Pressure plates, bending devices, shearing devices, wedge clamps, shear clamps, peeling clamps, screw clamps, pneumatic clamps and hydraulic clamps.

Year of construction: 2026, condition: as good as new (ex-display), Universal testing machine PM5 Force: 5 kN Hedpfx Apod R Dqbo Hsnn crosshead stroke: 520 mm working chamber depth: 66 mm total height: 1036 mm Weight: approx.48 Kg travel resolution: 0,01 mm test speed: 1-500 mm / min Return speed: 700 mm / min Force transducer: 5 kN incl. evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, so that a "quick test" can also be carried out without a PC. For tests that require data storage and recording of the curve progression, we offer you the possibility of control and evaluation with the basic software. This enables you to generate different test sequences and to create a test protocol. Furthermore, you have the possibility to process the raw data in your own programs. Optional: - Delivery & Commissioning -DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping fixtures: Pressure plates, bending fixtures, shear fixtures, wedge grips, shear grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: N1000, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,850 mm, total width: 1,390 mm, total height: 2,140 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with a 12-month warranty, -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Control unit cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC controller H1700 (100 programs, each with 20 segments) with Nabertherm (NCC), computer-assisted, extremely user-friendly control system, as well as recording of all parameters; recordings can be edited, supplemented with batch data, etc., archived, and printed. -Printer and UPS integrated in the control unit cabinet. -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety locking mechanism -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection -Calibrated regulating thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording. -Separate control cabinet -Audible alarm and alarm light -Over-temperature limiter -Power: 75 kW Hodpjzbr U Uofx Ap Honn -Oven weight: approx. 2320 kg + control cabinet + control unit cabinet -DGUV V3 inspection currently valid with protocol -Documentation, CE declaration, circuit diagrams The oven is in top condition. It has been used for approximately 10 months in a cleanroom for the production of implants. We would be happy to offer installation, commissioning, and training for your employees. Please contact us! We carry new and used industrial ovens. Inspection in our warehouse is possible upon request! Chamber furnace, furnace, ovens, muffle furnace, firing furnace, hardening furnace, heat treatment furnace, annealing furnace, sintering furnace, drying furnace, industrial furnace, ceramic furnace, tempering furnace, sintering oven.

Condition: used, Year of construction: 1985, machine/vehicle number: R88, Used COBERT filling machine for wineTechnical Specifications & Performance DataThis Cobert SUPREMA is an isobaric filling machine engineered for precise counter-pressure filling of wine. With 24 filling valves, it achieves consistent product levels and preserves carbonation and quality in both still and sparkling products. The machine architecture supports industrial packaging environments where accuracy, hygiene, and repeatability are essential for beverage production.Manufacturer: CobertModel: SUPREMAYear: 1985Speed: 3000 BPH Machine type: Isobaric filling machineFilling technology: Isobaric (counter-pressure)No. of filling valves: 24Products: Still wine, semi-sparkling wine, sparkling wineContainers: Glass bottlesLine context: Suitable for integration in a used bottling line and second hand beverage production setupsAdvanced Automation & Control SystemsThe isobaric system pressurizes each bottle prior to liquid dosing, enabling controlled product transfer and stable filling even with carbonated wines. Valve sequencing provides reliable start/stop phases, while pressure equalization safeguards product integrity. The machine supports standard operator controls for setup and monitoring, aligning with established bottling equipment practices for safe and repeatable operation.Production Line Integration CapabilitiesDesigned for seamless integration into a complete bottling line, the SUPREMA pairs effectively with upstream rinsing machines and downstream cappers, capsule application, and labeling machines. It handles standard wine bottle geometries and neck finishes commonly found in beverage production. As part of an industrial packaging or beverage production line, it can operate in-line or as a standalone filler with dedicated infeed and outfeed conveyors.Machine Condition & Maintenance HistoryManufactured in 1985, this SUPREMA reflects robust Cobert engineering suitable for long-term service in second hand bottling applications. Preventive maintenance typically focuses on cleaning and sanitation of product-contact parts, routine inspection of seals and gaskets in the isobaric valves, verification of pressure settings, and calibration of fill levels to ensure consistent performance.Operational Performance & VersatilityThe isobaric filling principle enables gentle handling of sparkling and semi-sparkling wines by matching internal bottle pressure, minimizing foaming and preserving dissolved CO2. For still wines, the controlled filling cycle supports steady flow and stable levels. Its 24-valve configuration balances throughput with careful product handling, making it a versatile choice for wineries upgrading or expanding a used bottling line with proven filling technology.Installation Requirements & Site PreparationInstallation follows standard bottling equipment practices: stable, level flooring for accurate alignment; access for cleaning and service; and suitable utilities such as electrical power, compressed air for actuators, and process water for sanitation. Prop... Hodozcf I Rspfx Ap Hjnn

Condition: refurbished (used), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 400 mm, warranty duration: 12 months, total height: 2,300 mm, type of input current: AC, total width: 1,120 mm, total length: 1,540 mm, overall weight: 1,350 kg, input voltage: 230 V, table load: 30 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Factory-reconditioned Mahr Multiscope 664 (Including certified factory acceptance before delivery) Factory-reconditioned premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Online or optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: Optional complete service: - Delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training and training programs can also be booked as online courses. Hedpfxsu Dw S Re Ap Honn Rent-hire-purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements! Multisensor measuring device equipped with camera system and Renishaw touch system. Measuring range of all sensors: 600x600x400mm (l x w x h) Dimensions: 1540x1120x2300mm (l x w x h) Space requirement: 1940x1520x2500mm (l x w x h) Weight: approx. 1300kg (including control cabinet and base frame) Max. load weight: glass plate 40kg Accuracy: U1=2.2 + L/150; U2=3.0 + L/125; U3=3.2 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s incl. camera with 2-stage zoom incl. laser incl. LED ring light incl. Renishaw TP200 touch probe system incl. frame grabber (Eagle) incl. Windows 10 incl. new Optichek 3D 5.0 ​​evaluation software Incl. Renishaw TP200 touch probe system The measuring device can be programmed for customer-specific parts during optional commissioning and calibration so that you are immediately able to run your measuring programs before any training that may be necessary.