Used Bernardo Goliath 660 X 3000 for sale (63,240)

Condition: excellent (used), Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized Iedpfx Aogxgl Neb Noat -Price: complete -Dimensions: 3000/820/H120 mm -Weight: 212 kg

Condition: good (used), Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized Iaedpfxjcd Emys Ab Not -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Steam Cylinder Iasdpspb Ea Eefx Ab Nst -Manufacturer: HygroMatik, steam cylinder for steam humidifiers/steam generators -Type: unfortunately without type designation -Accessories: including 6x electrics / 1x sensor electrics installed, see photos -Quantity: 2x containers available -Price per piece -Dimensions Ø 372 x 660 mm -Weight: 7.6 kg

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table Ijdjw Dzk Ejpfx Ab Njat -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Condition: good (used), Year of construction: 2013, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Ijdpfotp Rfpsx Ab Nsat -Manufacturer: MTF, belt conveyor on solid base frame, height adjustable -Type: GL-HM 140 -Speed: 9 m/min -Belt width: 275 mm -Conveyor length: 3000 mm -Drive: ATB 0.18 kW, see photo type plate -Transport dimensions: 3060/500/H930 mm -Weight: 89 kg

Condition: good (used), Year of construction: 1972, Scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table -Manufacturer: Lödige, scissor lift table -Load capacity: 1000 kg -Platform: 3000 x 2000 mm -Dimension retracted: height 390 mm -Dimension extended: height 2000 mm -Hydraulic unit: Bauknecht 3 kW / 150 bar -Transport dimensions: 3000/2000/H390 mm Iaedpfjmghawjx Ab Nst -Own weight: 2100 kg

Condition: good (used), Underframe for conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand -Base: height adjustable -Type: Width 1180 mm -Height: 660 mm, adjustable -Number: 8 trusses available -Price: per piece -Roller conveyor: suitable in stock, see ID 35086 Isdpov U Tm Iefx Ab Njat -Transport dimensions: 1180/150/H660 mm -Weight: 12.5 kg/piece

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, accumulation roller conveyor -Roll width: 600 mm Iaodpfsdct Alsx Ab Nst -Conveying length: 3000 mm -Diameter roller: 80 mm -Center distance: 200 mm -Height: 280 mm -driven: via round belts -Geared motor: 0.55 kW -Speed: 7.5 m/min -Number: 1x roller conveyors available -Price: per piece -Dimensions: 3000/660/H280 mm -Weight: 136 kg

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP S54 Four roll bending machine Electronically controlled, electric drive, four-rolls bending machine Technical specifications: Number of Rolls: Four Iaedpfx Aeiivgrob Nst Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 300 mm lower roll diameter: 280 mm Side rolls diameter: 200 mm Guaranteed installed power: 10.8 kW Guaranteed maximum rolling speed: 5 m/min Guaranteed machine weight: 10,000 kg Length: 5,500mm Width: 1,400mm Height: 1,600mm Guaranteed services: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 18 mm Bending performance (full working width) 12 mm from pipe diameter 1500 mm Rolling capacity (full working width) 12 mm Bending capacity (full working width) 10 mm from pipe diameter 450 mm Standard equipment: Electrical drive of the top roll Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rollers for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3135 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Technical specifications: Number of Rolls: Four Geometry of the side rolls: planetary guide Working length: 3000 mm Top roll diameter: 350 mm Lower roll diameter: 330 mm Side rolls diameter: 250 mm Guaranteed installed power: 14.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 13,000 kg Length: 5,700mm Width: 1,800mm Height: 2,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 20 mm Bending performance (full working width) 15 mm from pipe diameter 1750 mm Iaedpfx Aeiivc Dob Net Rolling capacity (full working width) 14mm Bending capacity (full working width) 12mm from pipe diameter 455 mm Standard equipment: planetary movement of the side rollers Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN 4HEP 3163 Four roll bending machine Electronically controlled, hydraulic four-rolls bending machine Iodpfx Abeiivfqj Njat Technical specifications: Number of Rolls: Four Geometry of the side rollers: planetary guide Working length: 3000 mm Top roll diameter: 630 mm Lower roll diameter: 570 mm Side rolls diameter: 500 mm Guaranteed installed power: 72 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 58,000 kg Length: 6,800mm Width: 3,600mm Height: 3,550mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 70 mm Bending performance (full working width) 60 mm from pipe diameter 3150 mm Rolling capacity (full working width) 55 mm Bending capacity (full working width) 50 mm from pipe diameter 820 mm Standard equipment: Planetary movement of the side rolls Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection cone bending device Mobile control panel 3 digital displays for the position of the side rolls and the lower roll Safety trip wire with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Isdoiivgyepfx Ab Nsat Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm Iaedpfjiink Sex Ab Njt from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: new, functionality: fully functional, Year of construction: 2026, max rolling capacity (cold): mm. 32 max prebending capacity (cold): mm. 24 at diameter mm. 2050 with material yield strength N/mm2 260 working length: mm. 3050 number of rolls: four top roll diameter mm. 410 pinching roll diameter mm. 390 driven rolls : two rotation speed 5 m./min. rolls rotation: hydraulic installed power: 30 PS Voltage 400V, 50Hz, 3Ph Iedpfx Ajf T Rzfeb Njat Inkl.: - hardened & polished rolls - cone bending device - electronic rolls parallelism - Siemens PLC Control - CE certificate - control console on wheels

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm Iodpfoc S N Nqsx Ab Nsat variable three-roller bending machine

Condition: excellent (used), Year of construction: 2007, Manufacturer: GEMINIS Model: GHT5 G2 1000 x 3000 Iedpfx Ajwgmz Usb Neat Cnc : SIEMENS 810 D Year : 2007 Distance between points : 3000 mm Max. Swing over bed : 1000 mm Max. Swing over saddle : 680 mm Main shaft hole diameter : 104 mm Turning speed : 1400 rpm Main motor : 37,5 kw Cross slide travel : 8m/min Tailstock quill diameter : 140 mm Quill traverse : 300 mm Bed width : 550 mm

Condition: excellent (used), Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt Iajdpfx Abjwv Nl Ij Nst -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

Condition: good (used), Year of construction: 2009, 1 used CNC lathe Brand DMT/Kern Type CD 480 x 3000 Year of manufacture 2009 Control Manual Plus 620 Technical specifications: Center height 230 mm Turning diameter over bed 475 mm Center distance 3000 mm Cross travel 255 mm Spindle head DIN 55026/6 Spindle bore 82 mm Power consumption 30 kW Tool holder turret VDI 40 Iaodpfxsu A Ducj Ab Nst Equipped with Turret Hinged belt conveyor Complete documentation available! Machine is ready for use and can be tested on-site!

Condition: excellent (used), Year of construction: 1999, Technical Data: Working length: 3050 mm Distance between uprights: 2690 mm Isdew Tcncepfx Ab Nsat Pressing force: 130 t CNC control: DELEM Adjustable backgauge Controlled axes: Z1 / Z2; X; R CNC-controlled crowning Installation height: 535 mm Stroke: 365 mm Throat depth: 410 mm Hydraulic tool clamping top and bottom Ram position measuring system with spring-back compensation via glass scales Program-controlled lower tool shifting (I-axis) for 2 positions Motor power: 12.5 kW Number of backgauge fingers: 2 CE mark Dimensions (L x W x H): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tonnes Condition: Good condition The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe Ijdpfx Ajxxm A Hsb Neat FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre

Condition: good (used), Hommel Dura measuring plate / control plate made of natural hard stone Iajdek Shcuspfx Ab Net Hommel Dura measuring plate made of hard stone (granite plate) length: 3000 mm width: 1000 mm thickness: 300 mm 1 x T-slot More measuring plates in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 12/09742, working width: 3,000 mm, bale length: 3,050 mm, roller (bottom) diameter: 400 mm, roller (top) diameter: 405 mm, sheet thickness (max.): 30 mm, TECHNICAL DETAILS Sheet width: 3,000 mm Upper roll working length: 3,050 mm Lower roll working length: 3,050 mm Isdpew Eh Hvefx Ab Njat Side rolls working length: 3,100 mm Upper roll diameter: 405 mm Lower roll diameter: 400 mm Side rolls diameter: 320 mm Plate thickness for bending: max. 30.8 mm Plate pre-bending: max. 20 mm Distance between upper and lower roll: 70 mm MACHINE DETAILS Total power requirement: 45 kW Electrical connection: 220/380 V Roll drives: 2 units FURTHER DETAILS Tilting of upper roll from operator panel Opening of swing bearing from operator panel Overload protection for conical bending device

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm table height 300 mm total power requirement 0 kW weight of the machine ca. 5,2 t dimensions of the machine ca. 3 x 2,5 x 0,3 m Iaodjftfcwepfx Ab Nst

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal Iodpfxox Ew Dqj Ab Njat - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Year of construction: 2020, condition: new, The Sapphire is the optimum solution for heavy industry for material thicknesses up to 200 mm. It enjoys great popularity with various production companies - often in three-shift operations - and all areas of application where stability, efficiency and process reliability are particularly important. Thanks to the high-quality equipment, the system is a universal tool for the highest demands and a helpful instrument for process optimization. Used in more than 400 industrial plants worldwide, the Sapphire cutting system proves itself every day. Equipment - Harris oxy-fuel burner - Kjellberg plasma torch with e-touch - Kjellberg Q 3000 plasma power source with automatic gas console - Crosshair laser pointer for easier positioning - CamConcept Finest Cut V 7 - Suction table 3000 x 6000 mm - Suction unit PFC 6 incl. suction pipes Iaedsf Ak N Repfx Ab Nst - Delivery, installation and commissioning Main features - High dynamics and precision in automated 2D & 3D cutting of sheets, tubes and profiles - Sheet metal processing up to a material thickness of 200mm - Extensive cutting database for ideal user-friendliness - Designed for highest demands under the most difficult conditions in three-shift operation General technical data Drive: Servo AC Available working widths: 2.000-7.000 mm Available working lengths: from 1.500 mm positioning speed: 25,000 mm/min cutting thickness: up to 200 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy