Used Biesse Sharpener for sale (882)

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Podpfxeq Dzi Ts Abgora Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), WORKING LENGTH- 80 CM Psdsttu Tzepfx Abgjra

Condition: used, Tobacco cutting machine -Sold/handed over: in its current condition as seen Prodpfx Abjiy Efijgea -Prototype: Machine is not operational -Manufacturer: Sagemüller, tobacco cutting machine with knife sharpening device -Cutting blades: 8 pcs. length 400 mm, 2 pcs. die 850/120/H275 mm -Individual components: see photos -Machine dimensions: 1900/1340/H1810 mm Total weight: 1935 kg

Year of construction: 1980, condition: excellent (used), I sell the saw blade and saw leaf sharpening machine Loroch G77, Made in Germany. Prodpfx Abjim Ea Dsgsa

Condition: good (used), Tool sharpening machine with wet grinding. Pedpfxsich Elj Abgsra

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 – Combined Saw-Milling Machine With pivoting saw blade, pivoting milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel distance 2250 mm) Large extension table (900 x 600 mm) with extendable aluminum telescope fence Max. saw blade diameter 315 mm with scoring device, pivotable from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large, double-bearing milling unit ensure maximum stability, precision, smooth operation, and long service life Solid and precise machine table made of stress-free cast iron 3 milling speeds, manually adjustable from 3,500 - 10,000 rpm With clockwise/counterclockwise rotation of the milling spindle Standard arc milling guard Two 5.0 kW motors with high power reserves Cast iron milling unit mounted on both sides at the top precision ball bearings on top close to the pivot point four optimally graduated milling speeds, which enables the sharpening of workpieces Powerful motors Industrial motor, 100% duty cycle for continuous operation (full load) suitable Scope of delivery: Arc milling guard Anodized aluminum format sliding table Aluminum fence jaws Folding stops Technical data Dimensions of cast iron work table 1112 x 430 mm Fence length 2250 mm max. saw blade diameter with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm Podpfx Aocnwydobgera max. crosscut width 2660 mm Saw blade pivot 90° - 45° Cutting width 900 mm Speed 4000 rpm Table saw - Spindle pivot 90° - 45° Spindle working length 100 mm max. tool diameter 210 mm max. tenon tool diameter 275 mm max. countersinking tool diameter 180 mm Speeds 3,500/7,000/10,000 rpm General - Motor power 400 V/50 Hz/S6 40% 2 x 5.0 kW (6.6 HP) Weight 470 kg Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Location: In stock, 54634 Bitburg - immediately available -

Condition: excellent (used), PRIMULTINI SHARPENER Prsdjwfci Eepfx Abgoa

Condition: ready for operation (used), Deckel SOE Graver Grinder Largest collet bore: 17.5 mm Largest grinding length: 90 mm Largest grindable angle: 180° Largest grindable radius: 10 mm Coarse adjustment: 100 mm Fine adjustment: 15 mm Dividing head support pivoting: 90° Coarse adjustment of dividing head slide: 40 mm Predev T T Ivepfx Abgea Fine adjustment of dividing head slide: 12 mm Height from pipe guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Optics Collets You are welcome to come by for a viewing. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The phone number is located at the very bottom of the item page in the seller's imprint/legal information. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. The assembly and electrical connection of the machine/device must be carried out or checked by a trained specialist. Deviations from technical specifications and errors in the description of the item may occur and are reserved. Shipping is only available to businesses - for private consumers, only pickup is possible.

Condition: good (used), Year of construction: 1987, machine/vehicle number: Kahny, Fully working Podpfexp N I Hex Abgsra

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, warranty duration: 6 months, DGUV certified until: 07/2027, type of input current: AC, total length: 700 mm, total width: 800 mm, total height: 1,050 mm, control voltage: 24 V, input frequency: 50 Hz, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 800 mm, Treif Primus 400 bread slicing machine Treif Primus 400 – “The premium model” Rotary knife slicing machine Stainless steel design Knives newly sharpened and coated Best slicing performance for your bread Operation via easy one rotary control Dimensions: 800 x 700 x 1050 mm (W x D x H) Robust technology 230V connection, ready for plug-in Used machine & SAB inspected With warranty + spare parts service Pedpfxsxp Uhfo Abgora Quality from a specialist company! Benefit from over 35 years of experience! Options: Maintenance contract Replacement knives Service package Delivery service Instruction & commissioning Visit our large exhibition of bread slicing machines!

Condition: excellent (used), Knife grinder MVM model K250 with tilting magnet mm 2100 long, grinding wheel motor 13,5 kW Predeyg Ny Eopfx Abgja

Year of construction: 2007, condition: used, functionality: fully functional, The Moretto auxiliary granulator is for sale; Power: 2.2 kW Blades: 3 pcs, sharpened Pjdpfxeyk Effo Abgsra Stator blades: 2 pcs Screen: 6 mm Mobile (on wheels)

Condition: used, Technical data: Grinding wheel diameter: 250 mm Manual feed Power supply: 380 V Total power: 1.1 kW Overall dimensions: Prsdjymykbopfx Abgoa Length: 1550 mm Width: 2000 mm Height: 2200 mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Pedpfxsw T S Sqe Abgsra Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: new, Year of construction: 2026, functionality: fully functional, CBN Borazon Grinding Wheel for CORMAK DG13M Drill Sharpener – precise and durable grinding disc Predpfjycqt Sjx Abgoa High-quality CBN borazon grinding wheel dedicated to the CORMAK DG13M drill sharpener is a consumable element that directly affects sharpening quality and the service life of cutting tools. It ensures precise HSS drill sharpening across the full range handled by the machine. Its construction is optimised for demanding workshop and industrial conditions, offering high efficiency and minimal abrasive wear. Main product advantages Dedicated to the CORMAK DG13M sharpener – ensures perfect fit and optimal operating parameters. CBN (borazon) abrasive material – optimal for sharpening HSS high-speed steel tools. Vibration-free operation – high dynamic balance of the wheel eliminates vibrations and improves sharpening quality. High durability – significantly outlasts standard aluminium oxide wheels. Stable sharpening parameters – ensures repeatability and accuracy even during series regeneration of drills. Construction and technology CBN wheel (Cubic Boron Nitride) is the second hardest abrasive material after diamond, yet far more resistant to temperature and wear when working with HSS steel. The specialised bond and precise geometry make it ideal for applications in sharpeners such as the CORMAK DG13M, where edge accuracy and long tool life are essential. The wheel is optimised for direct mounting on the machine spindle axis, ensuring minimal runout and reliable grinding performance. Precision and work efficiency The use of a CBN wheel in drill sharpeners such as the DG13M results in significantly improved operating parameters: shorter sharpening time, lower tool temperature and reduced risk of burning. The high rigidity of the abrasive allows for a uniform and sharp cutting edge while maintaining the correct rake angle and drill geometry. This makes drill sharpening more repeatable and efficient. Ensure the highest sharpening quality – choose a grinding wheel for the CORMAK DG13M sharpener Replacing a worn wheel with the original CBN borazon grinding wheel ensures optimal sharpening quality in drill sharpeners. Thanks to the wheel’s high efficiency and durability, you minimise downtime and improve process performance. Order now and restore full precision to your CORMAK DG13M drill sharpener!

Condition: new, Year of construction: 2023, Mowing Basket    • Suitable for wheeled and tracked excavators from 5 tons    • Working width from 2000 to 5500 mm    • Suspension by means of spring    • Self-sharpening blades    • CW 30 coupling    • 90-degree hydraulic tilting    • Competitive prices, fast delivery! Condition: New Pedpfx Aex I H Tmsbgjra Year of manufacture: 2023

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 06/2027, cutting width (max.): 16 mm, type of input current: three-phase, total length: 730 mm, total width: 600 mm, total height: 1,200 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, year of last overhaul: 2026, space requirement height: 1,200 mm, space requirement length: 730 mm, space requirement width: 600 mm, Bread slicing machine MHS Compact Mobile rotary knife machine Knives newly sharpened and coated Manual operation via membrane keypad Simple, robust technology DGUV V3 certified – available only from us Connection: 400V, 16A CEE plug Used machine, cleaned Pedpex Nutdefx Abgora With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Spare knives Maintenance contract Delivery service Service package Spare parts box Training and commissioning

Condition: new, Year of construction: 2026, functionality: fully functional, coolant pump power: 1,100 W, grinding wheel diameter: 250 mm, workpiece weight (max.): 1,400 kg, warranty duration: 12 months, spindle speed (max.): 4,800 rpm, disc diameter: 250 mm, grinding spindle motor power: 500 W, grinding wheel bore: 32 mm, CNC sharpening machine for circular saw blades NBS 800 is equipped by transverse axis and therefore trapezoidal or alternately slanted teeth can be sharpened. Another advantage of the machine is the possibility of grinding the entire tooth profile. Sharpening machine for circular saw blades NBS 800 is ideal for the sharpening of stellite, CV, bimetal and carbide-tipped saw blades diameter up to 800 mm. It operates with ceramic, CBN or diamond grinding wheels using water cooling. Driven diamond dressing wheel with automatic cycle is installed in order to keep the shape of ceramic stone clean and consistent. Thanks to this, the stable and consistent tooth shape of the sharpened blade is ensured. The grinding cycle is controlled via CNC servo motors; with the result that the saw tooth dynamics remain consistent. Sharpening machine for circular saw blades NBS 800 incorporates a coolant reservoir and spray system which helps to keep the saw blades cool during grinding. Why are our sharpeners unique ? 1. Adjustment time savings 2. Grinding stones savings Pjdpjyxcunjfx Abgera 3. Perfect, precise cutting edge and improved the quality of wood cutting 4. Extended life of your tools 5. Issues with professional staff or machine operators ? No need to worry 6. The flexibility of automatic sharpener

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC 5D Year of manufacture: 2000 Prsdpoyuutysfx Abgja Carbide saw blade sharpening machine Condition: will be fully refurbished Used 7-axis CNC for face and back grinding - Diameter: 80 to 850 mm - Cross indexing table - SIEMENS MMC103 CNC control - All tooth geometries supported - Numerous options Pictures for reference only.

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, overall weight: 1,800 kg, total width: 1,800 mm, total height: 2,000 mm, spindle motor power: 4,000 W, product length (max.): 1,800 mm, spindle speed (max.): 8,000 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2004. This AVYAC NC240 features a maximum tool diameter of 40 mm and a sharpening length of 950 mm. It is compatible with HSS and carbide materials, equipped with an automatic touch probe for precise tool positioning. The machine also includes programmable indexing for variable teeth/flutes and an integrated oil mist extractor for effective mist control. If you are looking to get high-quality grinding capabilities, consider the AVYAC NC240 machine we have for sale. Contact us for further details. • A (workhead rotation): 360° continuous • B (pivot): -45° to +45° • C (grinding wheel incline): 360° • Workpiece capacity: • Diameter range: 2–40 mm Podpfsyux T Rex Abgsra • Max length: 300 mm • Grinding wheel diameter: 150 mm • Number of CNC axes: 4 (A, B, C, X) + 1 manual (Y) • Resolution: 0.001 mm / 0.001° • Positioning accuracy: ±0.005 mm • Utilities: • Power supply: 400 V / 50 Hz • Compressed air: 6 bar (87 psi) • Coolant tank capacity: 150 L

Condition: excellent (used), Machine for grinding down the teeth of HSS and friction circular saw blades Predewyc Nhopfx Abgja

Condition: excellent (used), Knife edge honing device REFORM Pjdjyidtpjpfx Abgjra

Condition: used, Year of construction: 2008, grinding diameter 160 mm dist. between centers 645 mm centre height 320 mm control SIN 840D turning speeds 27.000 U/min x-axis 550 mm y-axis 235 mm z-axis 300 mm A - axis 360 ° C-axis 270 ° Pjdpfx Asxxbzdjbgjra total power requirement 20 kW

Condition: good (used), Alber sharpening machine for band saw blades Prodeglui Aepfx Abgja Blade width 50 - 206mm Tooth pitch 20 - 50mm

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. Podpfx Aegwct Debgsra TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.