Used Cutter For Pvc Pipes for sale (9,130)

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Lajdpfjy Tauhex Aiieb

Condition: used, Year of construction: 2025, Drivetrain Drive: Wheel Weights Empty weight: 72.000 kg Laodpfx Aijx Ravgoiob Functional Lifting capacity: 300.000 kg Identification Serial number: 63006188 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 92500 Transport dimensions (LxWxH): 17.09x2.99x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 8 h, machine/vehicle number: C300002625, mast type: telescopic, fuel type: diesel, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Lasdpfx Aex Uv Ugsiiob Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: C300002967, mast type: telescopic, fuel type: diesel, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Laodjx U Rg Rjpfx Aiijb Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 68 h, machine/vehicle number: C300001316, mast type: telescopic, fuel type: diesel, Empty weight: 12.375 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Lodpfx Asxc Dl Tjiisab Tyre brand: - Max. horizontal reach: 1730 m Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Lajdpex Sch Isfx Aiijb Functional Lifting capacity: 250.000 kg Identification Serial number: 52509756 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 80000 Transport dimensions (LxWxH): 15.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, fuel type: diesel, mast type: telescopic, Year of construction: 2025, machine/vehicle number: C300002960, Empty weight: 12.225 kg Lifting capacity: 340 kg Working height: 2.220 cm Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1730 m Laedpfx Ajx Azi Nsiisb Transport dimensions (LxWxH): 10.21x2.49x2.57 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 250.000 kg Identification Serial number: 52509755 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 80000 Lsdpfx Aijxbxpqsisab Transport dimensions (LxWxH): 15.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 1 h, Weights Empty weight: 119.000 kg Functional Lifting capacity: 130.000 kg Lodsv Th Rlopfx Aiioab Identification Serial number: 6133.5.118 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 35000 Transport dimensions (LxWxH): 15.2x3x3.21 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2013, operating hours: 67,589 h, machine/vehicle number: 28271, fuel type: diesel, General information Mileage: 49.394 km Weights Empty weight: 3.500 kg Functional Lifting capacity: 230 kg Working height: 2.200 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1640 m Transport dimensions (LxWxH): 6.92x2.5x2.99 Lsdpfjtr Nygjx Aiisab Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, operating hours: 1 h, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 150.000 kg Ledpfx Aoxbxpdjiijab Identification Serial number: 51508182 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 44500 Transport dimensions (LxWxH): 14.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, Drivetrain Drive: Wheel Weights Empty weight: 60.000 kg Functional Lifting capacity: 150.000 kg Identification Serial number: 51508183 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: Bridgestone Carrier engine: - Upper engine: - Counterweight: 44500 Laodpfxsx S Uqus Aiiob Transport dimensions (LxWxH): 14.64x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, A log turning (orientation) system for top-end-first positioning is available for sale. Ledpfswkdt Nox Aiijab The system was in use for only a few years before the entire log infeed was removed. We also have additional components from the same log infeed available.

Condition: good (used), Machine is in good working condition. Laedpfx Aiey Tm Stjisb Repaired 2017.

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails Laodechuvrspfx Aiijb + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: new, Year of construction: 2026, Consisting of a bale shredder for large round bales, type MHB, and a straw shredder, type MHZ Ljdpjb Nulhefx Aiisab 1) Bale Shredder MHB: Special price starting from €22,975 net (manufacturing time approx. 15 weeks) Suitable for round or rectangular bales. Includes a frequency converter (FU) – this regulates the speed of the shredding floor. The bales are placed on the shredding floor, and the feed of the shredder is activated. The tines of the shredder tear the straw from the bale and fling it into the hopper. Ideally, the combination of bale shredder and straw shredder is recommended here. Technical data, bale shredder: Performance: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill, kW, number of straw mill). Without a straw mill, the bale shredder can even process up to a maximum of 900 kg/h of straw. Maximum size of rectangular bales: 2400x1200x800 mm (l x w x h) Shredder motor: 5.5 kW, 380 volts Shredding floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (l x w x h) Weight: 400 kg 2) Straw Shredder MHZ 600 - 11/15 kW; immediately available Special price starting from €6,995 net Surcharge for the even larger straw shredder (18.5 kW) + €2,750 net Technical data, MHZ with special hopper: Motor: 15 kW, 380-volt electric motor Diameter: 600 mm Hardened cutting knives Screen with interchangeable inserts Optional (10, 12, 15) 22, 30, 45 mm aperture With star-delta switch, overload protection, and 8 m power cable, ready for connection Discharge nozzle: 160 mm Discharge distance: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (l x w x h) Weight: approx. 240 kg --- Options available at an additional cost: Infeed auger + €970 net Cyclone (mounting on site by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter: €1,750 net --- Further options: Industrial dust extraction system (demonstration model) + starting from €9,950 net Optional with rotary valve *makes the material pressure-free + €5,750 net Control system: starting from €1,620 net Special shredder extension, 3 m *other sizes will be calculated + €9,750 net Briquette press MPP 180 S; little used demonstration model 70 mm briquettes - up to a maximum of 100 kg/h Starting from €39,700 net * larger machines on request --- Description: The muetek bale shredder was developed for shredding round and rectangular bales of hay and straw. The shredder flanged onto the bale shredder shreds straw from all types of cereals, hay, corn, and miscanthus. The muetek machines in the MHZ/MHB series are characterized by their robust construction and solid design. muetek bale shredders in the MHB series are equipped with a chain conveyor, onto which the straw bale is placed using a front loader. The support is adjustable depending on the type of bale. The chain conveyor presses the bale against the shredding rotor; the feed speed is adjustable. The shredding rotor is equipped with several tines that tear open the straw bale. The straw separated from the bale is discharged. --- In principle, the machines work for dry raw materials: - Straw - Hay --- Shredding hemp only works with a special shredder Surcharge approx. €9,720 net *depending on the design. Shredding hemp does not work with the straw mill. Requirements for the raw material: Moisture content maximum 12%

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W Ljdpfx Aioyah R Neisab - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: like new (used), Year of construction: 2023, machine/vehicle number: IV68/ IV78 /V88, functionality: fully functional, operating hours: 30 h, Professional Cutter Set for Spindle Moulder / Edger – Double-glazed Timber Frame, Like New For sale: complete set of interchangeable carbide cutters from Lehmann – Caul (Tool Experience), used only 3 times for manufacturing IV68 timber frames. This lot includes a full range of carpentry tools suitable for profiling and machining double-glazed timber frames: ✔ Opening cutters (A1, A2, A3, A4, A8, A9, A10) ✔ Fixed frame cutters (B1, B2, B3, B5, B6, B8, B10) ✔ Complementary/Counter-profile cutters (C1, C2, C4, C5, C8) ✔ Special tooling (e.g. D4) ✔ Professional-grade reversible carbide knives ✔ Several reducing rings All tools are fully compatible and modular—no missing parts for standard timber frame manufacturing. New value: €15,340 (with invoice) — 🔹 Condition: Excellent / barely used 🔹 Bore: 60 mm (majority of cutters) 🔹 Diameters: from 197 mm to 353 mm depending on model 🔹 Suitable for industrial spindle moulders, production optimized Why this is an opportunity: ✨ Complete ready-to-use set ✨ Condition like new Lajdex Dmgiepfx Aiiob ✨ Perfect for professional joiners or manufacturers ✨ Immediate productivity boost ✨ High new purchase value — Who is this for: ✔ Timber joiners ✔ Door and window manufacturing workshops ✔ SMEs or craftsmen seeking a professional-grade set ✔ High-end tool collection Further information: 📍 Collection in person possible 📦 Professionally packed for shipping 📸 Detailed photos available on request

Condition: used, diameter . mm Number of knives . tool adaptor . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Lajdpfxsyqvihe Aiiob Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Kilia 65 l | Meat/Bowl Cutter Laodpfjy Tza Ejx Aiisb Manufacturer: KILIA Fleischereimaschinenfabrik Fritz Reimers GmbH u. Co. KG Type: 65 Machine Number: 89413239 Year of Manufacture: 1994 Bowl Capacity: 65 liters Rated Power: 22 kW Rated Current: 51 A Supply Voltage: 400 V Frequency: 50 Hz Current Protection: 63 Amp. slow-blow The Kilia 65 is a professional, compact bowl cutter of German manufacture, designed for use in meat processing plants, artisan butcheries, and industrial kitchens. The device is used for chopping, mixing, and emulsifying meat and vegetable ingredients, making it a key component in the production of fillings for sausages, pâtés, finely ground processed meats, and all types of culinary preparations. Thanks to its powerful 22 kW motor, the cutter easily handles the intensive chopping of even well-chilled or sinewy raw materials. - Advanced bowl drive: The device is equipped with two bowl speed settings and a function to change the direction of rotation (forward and reverse operation), allowing for optimal adjustment of process parameters to the type and structure of the filling being prepared. - Robust construction: The housing and body are made of high-quality materials that are resistant to corrosion and meet the strict sanitary and hygienic standards of the food industry. - High efficiency: The optimal ratio of bowl capacity (65 liters) to engine power (22 kW) ensures rapid and precise cutting without overheating the filling. - Durability: Kilia machines from the 1990s are known for their extremely durable mechanics and simple, reliable electrical systems, which facilitate day-to-day operation and maintenance.

Condition: excellent (used), Offer consisting of: Schneider Senator 078 E-Line, year of manufacture 2005, very well maintained condition, including spare blade Lasdevx A Shopfx Aiiob

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Compared to the AeroCut model, the processing speed of the AeroCut Quatro is 2.5 times faster (depending on the specific application). This automatic cutter quickly and precisely processes up to 350 business cards per minute from SRA3 sheets (25 cards per sheet) using an optional cutting unit. The 263 stored program templates can be easily and conveniently selected via a 5-inch color touchscreen in German. There are 90 memory slots for additional programs with individual parameters (60 in Standard Mode and 30 in Flex Mode). Thanks to Flex Mode, it's easy to program and customize cutting processes as needed. An optional cross-perforation unit (e.g. for tear-off coupons) is available in place of the creasing unit. Tool-free switching between creasing and perforating units. Double-sheet detection and automatic ejection allow for uninterrupted operation. Digital counter (count up/down). Suction-based paper feed with variable speed. Cut mark detection with auto-correction. Accuracy: +/- 0.1 mm. Automatic format recognition for 350 x 500 mm / A3 Plus / A3 / A4. Feed table capacity: 100 mm stack height. The cross-cut is performed by a transverse blade, while longitudinal cuts are made by six self-sharpening rotary knives (including two double knives with 7 mm fixed distance). Integrated perforation unit with two manually adjustable tools and a creasing unit with upper and lower tools (depth adjustable in 5 steps). User-friendly magnetic stops for different output formats. Robust all-metal construction. Lockable castors ensure mobility. Lajdpfsyic Swex Aiisb Media size: min. 210 x 210 mm, max. 365 x 520 mm Paper weight: min. 120 gsm, max. 350 gsm Output size: min. 50 x 55 mm Weight: approx. 180 kg

Condition: good (used), Karl Schnell FD3 Process Automat Cutter-Mixer-Emulsifier This machine combines in a unique way mixer, cutter and emulsifier in a closed system. The advantages are obvious: – Space-saving by compact design, – Complete evacuation of the product in the pre-cutting bowl under vacuum with simultaneous mixing and premincing, – Stable end product with reproducible quality by fully automatic process control, – The possibility for direct and indirect heating and cooling, – The possibility to produce fine emulsion and paste-like masses as well as products with fine- up to coarse grained small pieces. In short: Time and cost saving with improved product quality. Manufacturer: Karl Schnell Model: FD 3 Hole Plate: 175 mm Ledexnkciopfx Aiijab Batch Capacity: 310 liter Drive Emulsifier: 18/37 kW Pre-mincing motor: 15/30 kW Agitator motor: 0,7 kW Revolution agitator: 13,3 min-1 Drive infeed screw: 1,5 kW Machine Dimensions LxWxH: 2.250x1.800x2.100 mm Machine Weight: 3.000 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max Lasdpfsg Dvdcox Aiieb - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Ledox Ebzqepfx Aiisab - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine