Used Dart Data Acquisition for sale (15,243)

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Ledsvcnpaspfx Ammoac Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 16,500 h, load capacity: 8,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: triplex, motor manufacturer: Deutz, fork length: 2,400 mm, tire condition: 80 %, overall weight: 16,500 kg, Equipment: adjustable boom, cabin, head guard, lighting, pallet forks, retractable fork, sideshift, trailer coupling, SPECIAL DESIGN LIFTING HEIGHT 8 meters !! we are offering: FRONT FORKLIFT, FORKLIFT, DIESEL FORKLIFT, ready to drive !! Total weight approx. 15 tons !! RX 70-80 4-wheel diesel forklift used Year of manufacture 2016 Offer is aimed at tradespeople, dealers, public and church institutions! Please only serious inquiries!! We are offering items from various acquisitions, which we describe as best as possible and provide meaningful photos. Further information about the item cannot be provided. Due to time constraints, we can only offer answers to this article if you provide us with a telephone number with your inquiry. Unless expressly described, this offer is used goods. Laedpfxevq I I Eo Ammoc Item is ready to drive with signs of use. Existing defects can be discussed by telephone All offers from stock 47441 Moers. Manufacturer: STILL Type: RX 70-80 Load capacity 8000 kg Lifting height 8000 mm Fork adjustment device (double) Fork length 240 cm, double pair of forks Year of manufacture 2016 Hours: approx. 15,000 per forklift Weight: 15 tonnes per forklift Fork adjustment device Full cabin Height 4000 mm For data see photos. Other industrial trucks in stock!! We offer the possibility of viewing on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by arranging an appointment by telephone. If required, the item can be taken away immediately. All dimensions are approximate Other offers from catering, storage technology, trolleys The following applies to all offers: All information is subject to change - photos are similar!!

Condition: new, Year of construction: 2024, functionality: fully functional, Baty R400 profile projector - flexibility and precision for larger workpieces The Baty R400 profile projector combines precise optical measurement technology with a generous 400 mm diameter screen, making it the ideal choice for inspecting larger workpieces. The horizontal light path and large measuring area of 300 mm x 150 mm provide the flexibility to efficiently measure both small and larger parts. Equipped with a choice of magnification lenses (10x, 20x, 50x and 100x), the R400 can be adapted to different measurement requirements. It is also available with multiple display options: XLS: Basic 2-axis display for precise and simple measurements. MX200: This model extends the functions to include geometric measurements, including the calculation of angles, radii and distances. It also enables the creation of tolerance reports. FT2: This model offers advanced features such as edge detection and a fully integrated reporting and analysis tool with SPC support and automatic data acquisition. With its robust design and ability to perform both simple and complex inspection tasks, the Baty R400 is the perfect choice for manufacturing environments where reliability and precision are required Lasdpfxjuyh E Ho Ammec

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture Plus XT - High-precision multi-sensor measuring system for very large workpieces The Baty Venture Plus XT is a sophisticated multi-sensor measuring system specially developed for the inspection of very large and complex workpieces. It offers outstanding precision and flexibility for companies that need to perform demanding quality checks. The robust design, combined with state-of-the-art CNC control and Fusion 3D software, enables automated and repeatable measurements on a large scale. Available models: VP-80100-CNC-XT With a measuring range of 800 mm x 1000 mm x 460 mm, this model offers the perfect solution for large workpieces. The combination of optical and tactile measurements enables precise data acquisition. The model is ideal for applications where medium to large components need to be measured efficiently and accurately. VP-80160-CNC-XT This variant has an extended measuring range of 800 mm x 1600 mm x 460 mm, making it ideal for longer and more complex workpieces. With the integrated 6.5:1 zoom optics and programmable LED lighting, this model offers high flexibility for the precise inspection of workpieces of different sizes. VP-100120-CNC-XT This model has a measuring range of 1000 mm x 1200 mm x 750 mm and is perfect for very large workpieces. The sturdy aluminum construction and the air bearing axes ensure maximum accuracy, even with heavier workpieces. The fully automatic CNC control and the user-friendly Fusion 3D software make it quick and easy to create inspection programs. VP-100200-CNC-XT With an impressive measuring range of 1000 mm x 2000 mm x 750 mm, this is the largest variant of the Venture Plus XT available. This model is designed for the inspection of extremely large components and offers maximum precision and flexibility. Thanks to the Fusion 3D software, CAD import/export and DXF overlays can also be used with this variant to perform complex measurements. Common functions: Multi-sensor technology: Combination of non-contact optical measurements and tactile measurements for comprehensive data acquisition and maximum precision. CNC control: Enables the creation of fully automated programs for repeatable and time-saving inspections. Fusion 3D software: Supports CAD import/export, DXF overlays and the creation of detailed reports with statistical process control (SPC). Programmable LED illumination: Provides optimal illumination of the workpiece to improve edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally expandable to 12:1, offers maximum flexibility for different measuring requirements. The Baty Venture Plus XT is the ideal solution for companies that require a flexible and precise inspection solution for large to very large workpieces. It offers the necessary precision and efficiency to meet even the most demanding production requirements Laedpfxjuyh Tko Ammjc

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture XT - Precise multi-sensor measuring system The Baty Venture XT is a sophisticated vision measurement system designed for a wide range of measurement requirements. It is available in three different versions, each covering specific applications: Venture XT VI-2510-MAN (Manual) This manual version is ideal for operators who prefer the flexibility of direct control. With a large measuring range of 250 mm x 100 mm, the manual version offers precise optical measurements and is ideal for inspecting small and medium-sized workpieces. The device is controlled via a joystick and offers simple operation, while the Fusion 3D software captures data accurately and reliably. Venture XT VI-2510-CNC (CNC) This CNC variant offers fully automated measuring processes for repetitive and precise series measurements. With a measuring range of 250 mm x 100 mm, it is ideal for companies that carry out frequent measurements in production environments. The combination of optical and tactile measuring methods ensures comprehensive data acquisition. The Fusion 3D software makes it easy to create and save programs to make the inspection process more efficient. Ledpfxsuyh R Ns Ammeac Venture XT VI-3030-CNC-XT (Advanced CNC) The extended CNC version offers even more flexibility with a larger measuring range of 300 mm x 300 mm x 200 mm and additional functions. This model is particularly suitable for complex and large workpieces that require high-precision inspection. The zoom optics (6.5:1) are fully programmable and allow flexible adaptation to different measuring requirements. The Fusion 3D software can be used to automatically generate complex programs that include both optical and tactile measurements. Common features of all models: Optical and tactile measurement methods: each Venture XT system combines non-contact camera-based measurements with tactile measurements via a touch probe. Fusion 3D software: All variants use the powerful Fusion 3D software, which supports CAD import/export, SPC analysis and DXF overlays. Programmable LED lighting: Available for all variants to ensure optimum illumination of the measurement objects. The Venture XT is the ideal solution for companies looking for a flexible and precise measurement solution, whether for manual, motorized or fully automated processes

Condition: used, mileage: 506,475 km, power: 405 kW (550.65 HP), first registration: 01/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, loading space volume: 22 m³, loading space length: 5,400 mm, loading space width: 2,440 mm, loading space height: 1,700 mm, Equipment: ABS, air conditioning, navigation system, * Retarder * Automatic transmission * Air conditioning * Alloy wheels * Navigation system * 1 bed * Refrigerator * Hydraulic connection for tipper trailer * Heuser aluminium tipper body 5.4 x 2.44 x 1.7 m * Lift axle * +Heuser 2-ZAK aluminium tipping trailer * Year of manufacture 12/12, inspection (TÜV) valid until 01/24 * Axle manufacturer: BPW * Permissible total weight: 18,000 kg * Tipper body: 5.2 x 2.44 x 1.7 m As viewed or offered, without additional services/accessories. Our offer generally does not include a new inspection (TÜV). Should a new inspection be required, we would be happy to provide a quote from our partner workshops! Vehicle may be fitted with advertising decals and/or lettering. Laedpfx Amsw Tpglemec Our general terms and conditions of delivery and payment apply. We support you with export, preparation of export documents, acquisition of license plates, supplier declarations, etc.! All details provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not represent warranted characteristics. The seller assumes no liability/warranty for typing or data transmission errors. Listed features should be checked separately as required. We explicitly reserve the right of prior sale, as we also advertise this item on other portals. Information about accessories is provided without guarantee. Subject to change, prior sale, or errors. We offer and strongly recommend an inspection and examination, so that buyers do not form incorrect assumptions regarding condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired.

Condition: used, mileage: 306,615 km, power: 130 kW (176.75 HP), first registration: 01/2009, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, loading space volume: 30 m³, loading space length: 6,250 mm, loading space width: 2,300 mm, loading space height: 2,100 mm, Equipment: ABS, electronic stability program (ESP), soot filter, tail-lift, * 6-speed switch Ljdpfxexxfnuo Ammoac * 2x electrically adjustable mirrors * 3-seater * Tow ball * Side door (right) * CARRIER Xarios 600 refrigeration unit * Dautel LB tail lift, 1000 kg capacity * 215/75 R17.5 (tread depths: 10/10-9-9/9/9 mm) * Leaf/air suspension ---- As viewed or offered, without any further services or accessories. Our offer is generally without a new roadworthiness inspection (TÜV). If a new inspection is required, we are happy to obtain a quotation from our partner workshops! The vehicle may be stickered and/or lettered for advertising. Our general delivery and payment terms apply. We support you with export, preparation of export documents, acquisition of number plates, supplier's declaration, etc.! Information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability/warranty for typographical or data transmission errors. Listed features must be verified separately as needed. We expressly reserve the right to prior sale, as this item is also offered on other portals. Accessory information provided without guarantee. Subject to change, prior sale or error. We offer and strongly recommend inspection and examination to avoid any misunderstandings regarding condition and suitability. The vehicle and tarpaulin may be lettered, images edited. We sell exclusively under our general terms and conditions, excluding any warranty. Inspections and testing are possible at any time by appointment and are expressly encouraged.

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements. Lsdpfoxvdryox Ammoac

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 12 months, type of input current: AC, overall weight: 1 kg, For sale: ZEISS T-Scan Hawk 2, a high-precision optical 3D scanner designed for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industrial and research applications, especially when components need to be measured in challenging environments. Fast application, easy operation. Condition: Lightly used, predominantly for trade shows, exhibitions, and training purposes only. Scope of delivery: · T-Scan Hawk 2 Lite · Class 2 blue laser, eye-safe (IEC 60825-1:2014) · Weight: < 1 kg · Calibration plate (DAkkS-calibrated) · Sensor cable · Transport case · Acceptance test in our facility with calibration bars in accordance with ISO 10360 · Acceptance certificate with traceability documentation · ZEISS INSPECT OPTICAL 3D Free · T-SCAN Hawk 2 sensor driver ZEISS INSPECT OPTICAL 3D Free · Open and edit new and existing projects · Import of point clouds, polygon meshes · Creation, editing, and processing of polygon meshes · Element construction: standard geometries, points, sections, curves, surfaces, dimensions · CAD import for standard formats: IGES, VDA, STEP, JT Open, STL, PLY · Application of common alignment methods · CAD comparison with colored deviation display · Dimensioning and geometric tolerancing analysis according to ISO GPS and ASME Y14.5 · Reporting module T-SCAN Hawk 2 Sensor Driver · Setup and calibration Laedew Swplepfx Ammec · Guided user calibration · Data acquisition and project management · Configurable workflow assistant · Switching measurement modes and setting exposure time directly on the sensor · Automatic sensor calibration monitoring · Pre-capture of reference points with graphic support · Real-time display of sensor position and acquired 3D scan data · Continuous transformation into a common coordinate system · Merging upper and lower surfaces · Removal of background points · Automatic calculation and export of non-overlapping polygon meshes · Export of scan data (e.g., G3D format, STL format) Note: The device was exclusively used for demonstration, training, and exhibition purposes, so some signs of use are visible. If required, we can provide a suitable laptop for an additional charge. 3D acceptance certificate available. We are also open to trade-in of older GOM systems upon purchase of the T-SCAN Hawk 2.

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, We are selling our 3D handheld scanner system with photogrammetry module, offering 0.05 mm measurement accuracy. We have used this system for precise measurement of welded assemblies, and it operates flawlessly. As we will no longer be producing these welded components in the future, we are offering the system for sale. The system can be tested at our premises. User instruction is also available upon request. The sale price is net, plus 19% VAT. An official sales invoice will be provided. Details of our 3D measurement system: Lajdoxpq Syspfx Ammsc Artec Leo 3D Scanner Year of acquisition: 2022 Condition: Very good, well-maintained Application: Precise, mobile 3D measurement without external hardware (integrated battery, touch display, wireless operation) Technical information: • 3D handheld scanner resolution up to 0.2 mm • Accuracy with handheld scanner up to 0.1 mm (base unit) • Additional photogrammetry module: Increases system accuracy to up to 0.05 mm per meter (!!) • High-quality color capture • Integrated battery for up to 3.5 hours of operation • On-device data processing • Incl. temperature compensation • Incl. calibration kit • Incl. calibration certificate Additional components included in the scope of delivery: • High-performance XMG PRO laptop (late 2021) – Processor: Intel® Core™ i7-11800H (11th Gen) 2.30 GHz – Memory: 64 GB RAM – Storage: 932 GB SSD – Graphics card: 8 GB dedicated GPU – Operating system: Windows 11 Pro (64-bit) • Incl. Artec Studio 18 software (lifetime licence) • Practical transport case for scanner and tripod ScanReference • SCANREFERENCE photogrammetry system for increasing scan accuracy to 0.05 mm/m • Includes camera, reference object, marker set, and software Accessory kit • Practical transport case for scanner and tripod • LEO spare battery • 1,000 magnetic targets • Self-dissolving scan spray Available for testing and viewing at: ASM Dimatec Deutschland GmbH, Lehmkuhlenfeld 2, 38444 Wolfsburg

Condition: excellent (used), Year of construction: 2014, operating hours: 3,000 h, functionality: fully functional, Year of manufacture: 2014, commissioning: 2017 OSP P300S control system Travel ranges: X1/X2-axis: 695/235 mm Y-axis: 300 mm Z1/Z2-axis: 1,600/1,461 mm B-axis: -30° to +210° Maximum turning diameter: 650 mm Big Bore main spindle 32/22 kW, spindle nose A2-11, max. speed: 3,000 rpm, max. torque: 955 Nm, bore diameter: 112 mm SMW VNK320-127 hollow clamping cylinder, through bore 127 mm 3-jaw chuck Forkardt 3QLK 315-88 Z11 Pressure reducing valve 8-70 bar Milling spindle 22 kW, max. speed: 12,000 rpm Tool magazine with 40 stations, HSK-A63 Lower turret with 12 tool stations Self-centering steady rest on lower turret Hydraulic steady rest SMW SLU-X-3.2-ZS, clamping range: 50-200 mm Programmable tailstock Renishaw RMP probe Drum chip conveyor TMF300 with 980 L tank 8 bar circulation pump 70 bar high-pressure pump Hinged belt chip conveyor Tool monitoring system for tool life and breakage Tool measuring device (with standard chuck) for safe setup MacMan machine management with integrated PDA (production data acquisition) Part program storage: 2 GB Max. length of individual part program: 2 MB 2x USB 2.0 ports Ljdpfx Amexy I T Ajmoac Ethernet interface with browser and DNC-T1 for program transfer Harmonic speed oscillation via periodic speed variation Tool height offset in Y-axis for turning tools Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C Hi-Cut Pro high-speed control for rotating tools 10 workpiece zero points (coordinate system selection function) Coordinate transformation

Condition: used, Year of construction: 2024, Optimum Optisaw SD500AV – Vario Bandsaw with Siemens Inverter Used bandsaw with signs of wear Heavy-duty industrial design Smooth, low-noise operation Manual or semi-automatic operation Infinitely variable saw band speed from 20–80 m/min High cutting precision due to vibration-free running Mitre adjustment from -45° to 60° by swivelling the entire saw bow Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic shut-off Coolant pump Ball bearing saw band guide with carbide inserts for optimal cutting results Easy setting of descent speed via feed rate control valve on the control panel Large, hydraulically operated quick-action vise, self-closing, laterally adjustable Manometer for correct saw band tension Clearly arranged control panel Semi-automatic operation functionality: Closing of the vise and activation of the motor Lowering of the saw bow for cutting Stopping of the motor and return of the saw bow to its home position Dimensions and weights Length approx.: 2129 mm Width/depth approx.: 1046 mm Height approx.: 1687 mm Weight approx.: 645 kg Electrical data Output (motor power): 3 kW Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 0.1 kW Total connected load: 3.8 kW Supply voltage: 400 V Mains frequency: 50 Hz Lsdpfox Dzv Eex Ammsac Machine data Saw band speed(s): 20–80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle range: -45 to 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Continuous real-time data acquisition: Yes Data storage location: On device Data access: Via wireless interface Cutting capacities 0° round (solid): 355 mm 0° square (solid): 300 mm 0° rectangle upright (solid): 300 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm -45° rectangle upright (solid): 250 x 250 mm +45° round (solid): 350 mm +45° square (solid): 290 mm +45° rectangle upright (solid): 290 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° rectangle upright (solid): 180 x 220 mm Explanation cutting capacity: Cutting capacity determined with aluminum based on saw bow weight. May vary when processing different materials and may be smaller in certain cases (this is not cutting capacity in the strict sense).

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: dd2d22d, ELECTRONIC CONTROL SYSTEM FOR X-RAY CUTTING LINE Wood type: Pine, Spruce Ljdpfx Ajxvxrnemmsac Scanner functionality Acquisition of measurement signals from the multi-sensor scanner. Processing (D) of the 3D map from the laser triangulation signal. Processing (S) of the fiber deviation map from the laser scatter signal. Processing (R) of the roughness map from the laser triangulation signal. Processing (C) of the normalized color map from the high-resolution RGB signal. Integration of 3D data, fiber deviation, roughness profile, and color map information into a coherent multidimensional image.

Condition: excellent (used), Year of construction: 2015, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Sinumerik 840Dsl, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, rotational speed infinitely variable, 2x Heller H6000 + Fastems Container Automation Horizontal Machining Centers with Flexible Pallet Container Heller H6000 2 machines with identical specifications Travel ranges Feed force X 1000mm 15kN Y 1000mm 15kN Laedpfx Amsxxx Dcemsc Z 1000mm 20kN B 360°, 0.001° Direct linear measurement system on all axes Rapid traverse: Axis dynamics Power X/Y/Z 50 m/min, 5m/s² B 25 rpm Spindle – Power Cutting Interface: HSK100 Speed: 5–8000 rpm Power: 43kW (40% duty cycle) Torque: 822Nm (40% duty cycle) Last spindle replacement: 2020 Tool Magazine Type: Shelf magazine Magazine positions: 265 Max. tool length: 600mm Max. diameter: 280mm Tool coding: Balluf chip Second control panel at setup station Setup station with 7 exchange positions Pallet changer Pallet size: 630x630mm Max. interference circle: 1000mm Max. height: 1200mm Max. weight: 1000kg Coolant system: Scraper belt chip conveyor Knoll coolant system Paper band filter Internal coolant supply (ICS) 50 bar, frequency controlled Work area rinsing Emulsion mist extraction Disc blow-off device for operator door Additional equipment: Facing slide device (auxiliary axis/U-axis) 4 facing slides per machine Tangential control incl. NC cycles Wireless measuring probe (Renishaw) Space requirements: 7100x3750x4300mm (LxWxH) Machine weight: 15,600kg Total power requirement: 44kVA Control: Sinumerik 840D sl Fast drill breakage monitoring Process-integrated tool monitoring Status lights 3D workspace model data Operating data acquisition (OPC/UA) Year of manufacture: 2015 Operating hours: approx. 32,000h (Machines still in operation) Fastems Pallet Automation FPC1500 Base container with 2 setup stations Extension container Total 20 pallet positions on 2 levels Control: MMS Space requirements: approx. 18x2.4x4.2m Total space requirement for the system (2x Heller + Fastems) approx. 18x10x4.5m Machines are still in ongoing production. Inspection possible by arrangement. Relocation of the machines can be organized.

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Lajdpsxg Ndiefx Ammjc Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Condition: used, functionality: fully functional, Agilent 6510 System + PC & Software. The set includes: -Agilent 6510 Q-TOF LC/MS -Agilent 1260 Infinity G1376A Capillary Pump -Agilent 1200 Series G1377A Micro Well Plate Autosampler -Agilent 1200 Series G1379B Micro Vacuum HPLC Degasser Lajdpfx Amst T T Tnjmec -PC & Software The Agilent 6510 Quadrupole Time-of-Flight LC/MS delivers unsurpassed Q-TOF sensitivity in a compact, bench-top design. With the 6510’s tenfold sensitivity advantage, you detect critical, low-level components that are out of reach of other Q-TOF instruments. At the same time, fast data acquisition means you can acquire one MS and five MS/MS spectra per second, for higher-quality data and more structural information from complex samples. And ultralow-ppm mass accuracy maximizes confidence in your results. Features: -Attomole-level sensitivity – Sensitivity unequaled by any Q-TOF on the market today enables the 6510 to detect more low-abundance components. -Better than 3-ppm mass accuracy – Outstanding mass accuracy, typically 1-2 ppm, rivals FTMS instruments and increases specificity and confidence in results. -Wide in-spectrum dynamic range – 3-4 orders of magnitude in-spectrum dynamic range enables identification of less-abundant compounds in the presence of more-abundant compounds and makes overall operation easier. -Fast MS and MS/MS acquisition – Fast spectral acquisition improves the identification of unresolved components in complex samples and makes the 6510 compatible with the latest fast chromatography. -Multiple ion source options- The best selection of ion sources in the LC/MS industry-including the revolutionary HPLC-Chip/MS and multimode ESI/APCI sources-allow the 6510 Q-TOF to address a wide range of LC/MS applications Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent 6520 System + PC & Software. The set includes: -Agilent 6520 Accurate-Mass Q-TOF LC/MS -Agilent 1260 Infinity HPLC G1379B Micro Vacuum Degasser -Agilent 1200 Series G2226A Nano pump -Agilent G4240A HPLC-Chip Cube Interface - PC & Software The Agilent G6520 LCMS QTOF MS System is a high-performance mass spectrometry system designed for accurate and reliable analysis of complex samples. It features advanced ion optics, high-resolution mass spectrometry, and fast data acquisition rates, making it ideal for a wide range of applications in pharmaceuticals, biotechnology, and environmental analysis. With its intuitive software and user-friendly interface, the 6520 Q-TOF LC/MS MS System provides researchers with the tools they need to quickly and easily identify and quantify compounds in even the most challenging samples. The Agilent 6520 Q-TOF has industry-leading performance in the most important categories: attomole sensitivity, better than 2-ppm MS mass accuracy, better than 5-ppm MS/MS mass accuracy, mass resolution to 20,000, and broad mass range from 25 to 20,000 m/z. This is an ideal choice for top-down and bottom-up proteomics, metabolomics, and HRMS applications. Good working condition. Please check out our other listings as well. Ljdpfst T Ub Hox Ammjac

Condition: ready for operation (used), The Thermo Scientific Dionex ICS-Series VWD is a highly advanced variable wavelength detector designed to provide accurate and precise detection of analytes in complex samples. It is a vital component of the Dionex ICS-Series chromatography system and is used for a wide range of applications, including pharmaceutical research and development, environmental monitoring, food and beverage testing, and more. Lajdpfx Amexnm Rvomec The detector is equipped with a state-of-the-art flow cell design that ensures excellent signal-to-noise ratios, providing exceptional sensitivity and selectivity for even the most challenging separations. The flow cell is also designed to minimize dispersion and band broadening, ensuring high resolution and accurate peak detection. The Thermo Scientific Dionex ICS-Series VWD Detector features a variable wavelength range of 190 to 900 nm, which enables it to detect a broad range of analytes. It also has high-speed scanning capabilities, enabling rapid data acquisition and analysis, making it ideal for high-throughput applications. Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5B0S000433, No minimum price – guaranteed sale to the highest bidder! The new price of the microscope was approximately €100,000! Further technical details can be found in the attached data sheet! TECHNICAL DETAILS Maximum magnification: x1000 Camera VHX-7100 Sensor size: 1/1.7 inch Sensor type: 12.22-megapixel CMOS sensor Total pixels (H x V): 4,168 × 3,062 Virtual pixels (H x V): 4,024 × 3,036 High speed (H x V): 2,048 × 1,536 High resolution, 4K mode OFF (H x V): 2,880 × 2,160 High resolution, 4K mode ON (H x V): 4,000 × 3,000 High resolution (H x V): 12,000 × 9,000 Electronic shutter speed: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/5,000, 1/9,000, 1/19,000 Supercharge shutter speed: 0.01-s steps from 0.03 to 4 s LCD monitor Size: 27-inch color LCD Screen size (H x V): 596.16 × 335.34 mm Pixel pitch (H x V): 0.15525 × 0.15525 mm Number of pixels (H x V): 3,840 × 2,160 Display colors: approx. 1.07 billion Viewing angle: ±89° horizontal, ±89° vertical VHX-S770E stand Travel range of the XY stage: ±50 mm Size of the XYθ stage (surface): 233 × 185 mm Speed of the motorized XY stage max.: 20 mm/s Travel range of the Z stage: 49 mm Load capacity: 5 kg Weight: 25.3 kg MACHINE DETAILS Connection: Digital Dimensions & Weight Dimensions without protruding parts (W x H x D): 635 x 450 x 132 mm Weight of the control unit: 10.8 kg EQUIPMENT KEYENCE VHX-X1 microscope unit Control console VHX-AX1D Processing unit OP-88885 Camera unit VHX-7100 Objective lens VH-Z00T High-performance objective lens VH-Z100 Lajdpjzb Eixsfx Ammsc Motorized revolving head Motorized precision stand VHX-S770E Large motorized XY stage Software module VHX-H6M Ring light and illumination adapter OP-88164 3D profile measurement Manufacturer documentation Original accessories

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 020033, spindle speed (max.): 5,000 rpm, spindle diameter: 110 mm, controller model: Siemens SINUMERIK, empty load weight: 11,000 kg, counter spindle speed (max.): 5,000 rpm, The machine is expected to be available for approximately €4,000, including loading onto a truck (FOB). TECHNICAL DETAILS Working area X1-axis: 1,190 mm Working area Y1-axis: 120 mm Working area Z1-axis: 260 mm Working area X3-axis: 540 mm Working area Y3-axis: 120 mm Working area Z3-axis: 260 mm Handling space X1-axis: 490 mm Axes and Feed Feed force X1/Z1/Y1: approx. 8/10/10 kN Feed force X3/Z3/Y3: approx. 8/10/10 kN Rapid traverse speed X1/Z1/Y1: approx. 80/40/7.5 m/min Rapid traverse speed X3/Z3/Y3: approx. 40/40/7.5 m/min Acceleration X1/Z1/Y1: 7/7/7 m/s² Acceleration X3/Z3/Y3: 7/7/7 m/s² Spindle Speed at main and counter spindle: 5,000 RPM Power at 100% duty cycle, main spindle: 20 kW Torque at 100% duty cycle: 105 Nm Power at 40% duty cycle: 27 kW Torque at 40% duty cycle: 145 Nm Spindle bore: 65 mm Spindle diameter at front bearing: 110 mm Spindle nose diameter (cylindrical): 140 mm Hydraulic full-stroke cylinder OVS80 - Main spindle Piston stroke: 32 mm Piston area: 34.36 cm² Clamping pressure: 8 to 80 bar Tensile or compressive force at 80 bar: max. 27.2 kN Leakage oil volume at operating pressure 80 bar: max. 2.2 l/min Hydraulic full-stroke cylinder OVS65 - Counter spindle Piston stroke: 32 mm Piston area: 26.1 cm² Clamping pressure: 8 to 100 bar Tensile or compressive force at 100 bar: max. 26.1 kN Leakage oil volume at operating pressure 100 bar: max. 3 l/min Y-axis Slide travel: 120 mm Feed force: 10 kN Rapid traverse: 7.5 m/min Resolution: 0.05 mm Laodpfszdqdfex Ammjc Speed of driven tools: 6,000 RPM MACHINE DETAILS Control system: Siemens SINUMERIK Unloading device Swivel angle: 90 degrees Swivel time: 2 s Slide travel: 100 mm Rapid traverse speed: 6 m/min Workpiece weight: approx. 10 kg Workpiece diameter: 200 mm Electrical data Rated power: 45 kW Apparent power: 53 kVA Rated current: 76 A Voltage: 400 V Frequency: 50/60 Hz Dimensions and weight Dimensions with chip conveyor (L x W x H): 2,770 x 4,435 x 2,750 mm Weight: approx. 11,000 kg EQUIPMENT Two tool holders with 12 tool positions each, VDI 30 Note: Further technical data can be found in the attached data sheet. The machine is not equipped with a B-axis.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,297 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! In January 2025, a new spindle was installed by the manufacturer! The machine has been regularly maintained! Previous use: The machine was primarily used for precision machining. Roughing operations were only carried out to a limited extent. TECHNICAL DETAILS Travel range X-axis: 2,800 mm Travel range Y-axis: 2,200 mm Travel range Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) Vertical: 10,000 rpm Spindle speed S1 (continuous operation) Universal swivel head 2-axis: 18,000 rpm Vertical milling head: TVS 10,000 Swivel milling head: TU 18,000 Tool holder: HSK 63 A Tool changer: 40 tool positions MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (-15 %, +10 %) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 99,222 h Program run time: 61,297 h EQUIPMENT High-rigidity gantry design Precise linear guides and ball screws Generous working area with 2.8 m X-axis travel High feed rates for efficient machining Ideal for tool, mold, and machine construction Documentation and acceptance certificate according to ISO standards Tool changer Lodpfjzb D Aqjx Ammeac Coolant system Chip conveyor Swiveling milling head with 4th/5th axis Maintenance and service documentation

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning length: 500 mm, turning diameter: 300 mm, spindle bore: 75 mm, spindle speed (max.): 3,800 rpm, controller model: OSP 5000L-G CNC-System, No minimum price – guaranteed sale to the highest bidder! Turning machine with integrated Okuma robot! TECHNICAL DETAILS Turning diameter over cross slide: 450 mm Turning length: 500 mm Turning diameter: 300 mm Spindle bore: 75 mm Spindle speed: 70 - 3,800 rpm Spindle power: 11 kW (30 min) / 7.5 kW continuous operation Travel X-axis: 400 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 12 m/min Feed rate XZ: 12,000 mm/min Data transmission: RS232 Tool turret: 12 positions MACHINE DETAILS Control system: OSP 5000L-G CNC system Laodpfx Amjzc E Dfemsc Data transmission: RS232 Tool turret: 12 positions Power supply: 3 × 400 V Rated machine power: 21 kVA Maximum load current: 36 A Dimensions & Weight Dimensions (L (with chip conveyor) x W x H): 3,900 x 1,800 x 1,800 mm Machine weight: approx. 4,500 kg EQUIPMENT Integrated Okuma robot Automatic parts feeding Ideal for series and automated turning operations Stable and durable design

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Ljdpfexdn Nrex Ammoac Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Ljdpfx Asw Nytnjmmjac Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: like new (used), Year of construction: 2017, max. wheel diameter 100 mm gear width 26 mm max. module 31 min. module 0,1 Control Siemens 840 D SL Number of working hours 9598 h total power requirement 45 kW weight of the machine ca. 7,8 t dimensions of the machine ca. 4,40x3,95x3,01 m Gleason 100S gear shaping machine for the production of internally and externally toothed cylindrical gears and other cylindrical workpiece circumference regularly occurring profiles and moulds as well as for the production of profiles using the single part process. Technical data: Nominal workpiece diameter 100 mm Lsdev Ehbbjpfx Ammeac Largest circumferential diameter 150 mm Machine nominal module approx. 3 mm (Guide value depending on the respective machining task.) Shaping spindle stroke speed range 0 - 3,000 1/min Stroke position adjustment range (manual) 20 mm Largest toothing width 26 mm Smallest pitch height of the hydrostatic inclined guide 400 mm Smallest/largest distance between tool axis - 20/+ 180 mm and workpiece axis Stand inclination range (manual) - 1/+ 11° Tool holder (manual clamping) HSK-D63 (hollow shank taper according to DIN 69063) Weight of the machine approx. 7,000 kg with robot cell