Used Dietz Dr 90L/4N for sale (5,036)

Condition: excellent (used), Year of construction: 2022, operating hours: 8,244 h, functionality: fully functional, overall weight: 445 kg, total length: 980 mm, total width: 1,975 mm, total height: 1,710 mm, power: 5.5 kW (7.48 HP), fuel type: electric, operating pressure: 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 45 °C, noise level: 68 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Available for sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf Service will be performed professionally on June 16, 2026. Manufacturer: BOGE Model: C 7 DR Year of manufacture: 2022 Type: Screw compressor, sound-insulated Configuration: • C7 = 5.5 kW screw compressor • R = mounted on a compressed air tank • D = integrated refrigerant dryer Compressor type: Oil-injected screw compressor Rated power: 5.5 kW Maximum pressure: 10 bar Effective delivery rate: 0.736 m³/min at 10 bar Voltage: 400 V / 50 Hz Drive: Direct drive with elastic coupling Ibedpfxszf Ihqj Anmoa Control: Electronic BASIC control Dimensions (L × W × H): approx. 1975 × 980 × 1710 mm Weight: 445 kg (with tank & dryer) Tank volume: 500 l (C7R standard) Type: freestanding, under-mounted

Condition: refurbished (used), Repair of the tachometer circuit board for various models. Ibjdpfx Anoy Rfzuemoa Please contact us if the gear stages are no longer functioning correctly as intended.

Condition: new, Mitsubishi Melsec KOJ1E-DR-AC220 sequence controller, serial number as shown in the photo, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Ibedpfx Asi Eb Ntenmea

Condition: ready for operation (used), Mitsubishi K0J1E-DR-AC220 Melsec-K controller, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Isdpfx Anji Eb Nasmsba

Condition: ready for operation (used), Dataram DR-717 32K x 17 card (Gildemeister), serial number as shown in the photo, used, with normal signs of wear, 100% functional. Isdpfx Asi D Un Rjnmjba

Condition: new, NORD Drivesystems SK agitator drive with stainless steel agitator New, unused agitator drive from stock. Complete, consisting of a NORD geared motor, flange mounting, and stainless steel agitator for tank and process applications. Manufacturer: NORD Drivesystems Motor type: SK 90L/4 Gearbox type: SK 9012.1AFBH VL2-90L/4 Design: Agitator drive with geared motor Ibedjzb Nvvepfx Anmoa Condition: NOS (New Old Stock) Motor power 50 Hz: 1.50 kW Motor power 60 Hz: 1.73 kW Motor speed 50 Hz: 1395 min⁻¹ Motor speed 60 Hz: 1675 min⁻¹ Operating mode: S1 Protection class: IP55 Insulation class: F Voltage 50 Hz: 230/400 V Δ/Y Voltage 60 Hz: 265/460 V Δ/Y Rated current 50 Hz: 6.15/3.55 A Rated current 60 Hz: 6.15/3.55 A Power factor cos φ: 0.78 Efficiency IE1 at 50 Hz: 77.5 % Efficiency IE1 at 60 Hz: 80.4 % Gearbox ratio: 8.09 : 1 Output speed: 172 min⁻¹ Mounting position: IM4 Agitator shaft: Stainless steel Agitator impeller: Stainless steel, 2-blade Flange connection: present

Condition: ready for operation (used), DONAU DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping Iodpoy Uv Tvsfx Anmeba - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Subject to errors and omissions.

Condition: as good as new (ex-display), For sale Ibjdpfeh Uqibsx Anmsa Demag wheelblocks New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: used, Technical details: Ibsdeu Ng S Dspfx Anmoa grinding spindle speed: 1440 U/min voltage: 220 V / Hz total power requirement: 1,1 kW machine weight approx.: 75 kg space requirements of the machine approx.: L:0,4 x B:0,7 x H:1,15 m Polishing block stands on welded sectional steel base with foot plate (400x400x5mm) -wire brushes Ø 200x25mm each are mounted on the left and right -without sanding support -Protection class IP44 -Operation via ON/OFF switch *

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 23 mm workpiece height max.: ./x. 2 mm drill capacity in cast iron: Ø 26 mm spindle taper: MK 3 bore spindle stroke: 135 (manual/automatic) mm range drill spindle revolution per minute: 7step U/min feed range: mm/U Table dimensions: 1200 x 500 mm table surface area: 1070 x 400 mm total power requirement: 3,55 kW weight of the machine ca.: 1,4 t dimension machine xH: 1,7 x 1,2 x 2,2 m Jib Length Arm: -vertical adjustment: 450mm and horizontal adjustment: 610mm -swiveling 360°, hydr. lock Right/left rotation for thread cutting with automatic switchover Operation via control panel Coolant tank with pump Isdpjv Ay T Dsfx Anmeba *

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Ibedpsrn Riqsfx Anmja Center of gravity: in the middle of the work surface

Condition: new, Year of construction: 2024, power: 15 kW (20.39 HP), volume flow: 2,000 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, type plate available, New machine, previous model year Ijdpfx Aey N A I Nenmoba

Condition: used, Two-side evaporator Goedhart -Type: DRS 52504 -Cooling capacity: 22.7 kW Ibedpfx Anoxpughemsa -Fin spinning: 4 mm -Fans: 2 x 500 mm -Dimensions: 2260 x 1600 x 530 mm -Stainless steel housing and block -Volume: 28 L -Quantity in stock: 5 -Reference number: CH 571 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condition: excellent (used), Two side evaporator GEA KUBA -Type: DRS 44637 -Cooling capacity: 60.7 kW at DT8, 58 kW at DT7 -Fin spinning: 7 mm -Fans: 4 x 630 mm -Dimensions: 4500 x 1550 x 700 mm -Block made of stainless steel -Volume: 72 L -Weight: 650 kg -Quantity in stock: 3 -Reference number: CH 535 Iodpfx Ajvw Np Rjnmoba -Condition: Used

Condition: new, Spare parts for Donau high-speed radial drilling machines Donau DR Donau Danuflex Isdpfxjy Ri H Ie Anmsba Donau Danumeric Donau Danusys Donauflex Donaumeric

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Ibedsgvkc Nopfx Anmsa Including 6x feet basic equipment 650 Article no. 280858.X

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm Ibodpey Aa H Njfx Anmoa turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Year of construction: 2004, condition: used, 2004, stainless bowl and spiral, 90L, mobile, 3Ph Iedpfxedg H I Ao Anmsba

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Manufacturer: Donau Model: DR 40-Z Serial number: 1146-3 If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. Ijdpoy Dn E Nofx Anmeba This is a used machine, therefore we sell under exclusion of any warranty.

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Ijdsx Hgkvepfx Anmjba Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Ibjdpfsp Am T Uex Anmja Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.

Condition: new, DEMAG control box / switch cabinet for hoist / wire rope hoist - DR / DMR / DH 1. Demag control box DR / DMR with frequency inverter DIC - 4 - 007 - C - 0032 - 05 Iodsyut Aaopfx Anmeba 2. Demag control box / switch cabinet for DH hoist

Condition: good (used), Exposure unit and drying cabinet Acosgraf Luxdryer DR 1316 Lights power 1080W for screen up to 130x160cm quick and efficient drying with temperature and time settings strong and quick vacuum fast and precise screen exposure 230V very clean Ijdpfxjvnwlzj Anmeba We ship everywhere in Europe (shipping cost to be added)

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X Ibjdpfxsgvkdbe Anmea

Condition: new, table length 2400 mm Ibsdpfx Asgvkfvonmoa table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X