Used Doppstadt Planetary Gear for sale (7,771)

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm honing length max. 500 mm max. module 5 Nlsdst Hwvmspfx Abzsd total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Njdpot Hw D Rsfx Abzold Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1977, max. wheel diameter 400 mm gear width 280 mm max. module 1 Nljdpfot Hw Hxox Abzod min. module 4 total power requirement 15 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Njdpot Hw R Defx Abzsld Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Nlodpfoxvdrysx Abzjd Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 1980, max. wheel diameter 1010 mm gear width 0 mm max. module min. module total power requirement 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m Max. depth of tooth 10 mm Max. workpiece Ø (for clearance) 1,010 mm Max. external Ø of coupling 610 mm Sliding base withdraw 216 mm Max. distance from grinding wheel to workpiece nose 90 - 430 mm Max. weight of workpiece, including clamp 500 kg No. of teeth 32 to 150 Grinding wheel Ø, approx 152 - 320 mm Grinding wheel speeds, infinitely variable 0 - 3,600 rpm Work spindle bore 60 mm Total electrical load, approx. 15 kW - 380 V - 50 Hz Weight, approx. 9,500 kg Accessories / Special Features * Automatic roughing and finishing process via pre-settable counter and built-in feed cam. * Counter for number of teeth. * Counter for number of dressing cycles. Nljdpfx Abot Hwniszjd * 2 built-on dressing units with three dressing diamonds for radius dressing, side dressing and wheel end dressing. * Built-on index plate for 48 teeth. * Separate coolant device with band filter. * Separate hydraulic unit. * Separate TRION oil mist exhaust. * Various small parts.

Condition: used, Year of construction: 1975, max. wheel diameter 160 - 1.600 mm gear width 250 mm max. module 20 min. module 1,5 total power requirement 1 kW weight of the machine ca. 3 t Nodpfst Hwptox Abzsld dimensions of the machine ca. m

Condition: used, Year of construction: 1997, max. wheel diameter 215 mm gear width 40,65 mm max. module total power requirement 20 kW weight of the machine ca. 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Njdpfx Abst Hwxhjzold Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. * Extensive coolant equipment with filter system, band filter, etc. * Driven grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after every dressing. * Gear grinding is effected either in single component operation using a conical cup wheel (Gleason 30°), or with a cylindrical cup wheel. These grinding wheels can be made of CBN, or of traditional "dressable" aluminium oxide material (question of cost). Grinding with a conical grinding wheel is of advantage with regard to heat build-up and quality of tooth contact pattern. Therefore these pairs of bevel gears (for automotive industry) can be generated in high quality with consistent accuracy, economically, and with short set-up times. Condition : Very good - machine can be inspected here under power Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Nledpfx Ast Hwzpsbzsd Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module Nedpet Hw Ebsfx Abzsld total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: used, Year of construction: 1973, max. wheel diameter 400 mm Nljdpfst Hw Hljx Abzsd gear width 75 mm total power requirement 25 kW weight of the machine ca. 7000 kg

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Nlodot Hwu Aspfx Abzed Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module Nledpfxst Hwxbs Abzod total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 min. module Njdst Hwxzspfx Abzeld total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, Year of construction: 1993, max. wheel diameter 330 mm gear width 180 mm Nlodpfx Aot Hwyfebzed total power requirement 12 kW weight of the machine ca. 7500 kg

Condition: excellent (used), functionality: fully functional, Reishauer NRK change gears Original change gear set with substructure, including 50 ground change gears in the original wooden box. 26 loose change gears, including 2 with Z=63, 2 with Z=64, and 1 with Z=72 (original). All gears with ground teeth. Nlsdpfxeza Dk Sj Abzsd The following accessories are also available: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (one incomplete) 9 new grinding wheel flanges Various new and unused grinding wheels Balancing mandrel Thread rolling device Roll grinding device Various cams/cam profiles Grinding device, manufacturer Landert Motoren Various oil nozzles Unused strip curtain/splash guard All technical specifications are subject to printing errors and omissions. Sale exclusively within EU countries.

Condition: like new (used), functionality: fully functional, Ferwood code: RS0002955 - Manufacturer code: 4-070-01-2267 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer a refurbishment service, please contact us. 9KG 46X39X27 Nlodoymdvhepfx Abzod

Condition: used, functionality: unexamined, Ferwood Code: RS0002834 - Manufacturer Code: 10680775 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service. Please contact us. 12 kg - 46 x 39 x 27 Nledpfx Asyb Sl Hobzsd

Condition: used, functionality: unexamined, Ferwood Code: RU0009426 - Manufacturer Code: - Condition: Used - Functionality: Not tested - If interested we offer a revision service, contact us. Njdpfx Asv Hzvuebzold

Condition: used, functionality: unexamined, Ferwood code: RU0010348 - Manufacturer code: JS-EV040 - Condition: Used - Functionality: Not tested - Compatible machine: - If interested, we offer an overhaul service; please contact us. 10KG - 46X39X27 Nodpfx Aoycfhqobzold

Condition: used, functionality: unexamined, Ferwood Code: RU0011862 - Manufacturer Code: 4-070-01-0901 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer overhaul service, please contact us. 9KG, 46X39X27 Nsdpfxoylbccs Abzjld

Condition: used, functionality: unexamined, Ferwood Code: RS0002835 - Manufacturer Code: SF57DRE90L4/TF/Z - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service, please contact us. 42KG - 70X46X34 Nsdpsyb Smqsfx Abzjld

Condition: used, functionality: unexamined, Ferwood Code: RU0009347 - Manufacturer Code: 31320008 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Nlsdsv Hrpfjpfx Abzsd

Condition: used, Year of construction: 1970, functionality: not functional, wheel width: 900 mm, For sale: Gleason No. 24A bevel gear shaping machine, manufactured around the 1970s. Maximum diameter: 900 mm. Maximum module: 20. The machine requires electrical system maintenance. Price: 12,000 Euros. Nlsdoznh Suepfx Abzsd

Condition: used, power: 2.2 kW (2.99 HP), nominal power: 2.2 kW (2.99 HP), overall weight: 30,000 kg, We offer a wide selection of used geared motors from conveyor systems for sale. Available manufacturers include: SEW NORD Siemens Lenze Demag Technical data: Power: from 0.55 kW to 2.2 kW Stock: over 1,600 units Total weight: approx. 30 tons Thanks to the large number of units, you are likely to find the right geared motor for your needs. Upon request, we will gladly send you a detailed Excel list with the available models and technical data. Large quantities available immediately Sales preferably as a complete package Price per unit: 100 to 150 € net (depending on the model and condition) If you are interested, we look forward to receiving your inquiry. Nlsdpjy Tg Saefx Abzed Please note that unrealistic price offers will not be answered.