Used Dust Extraction Blower 0.4 Kw for sale (39,061)

Condition: used, Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 Iedpedzzidofx Anwjth -Protection class: IP 65 -Dimensions: 330/220/H170 mm -Weight: 9 kg

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 200 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 28 mm -Protection class: IP 44 -Height shaft axis: 64 mm -Price: per piece -Number: 2x available -Dimensions: 430/172/H225 mm Itedpfxsdki N Ss Anwsh -Weight: 19 kg

Condition: used, Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 Iodedlbcgspfx Anwjth -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Year of construction: 1994, condition: used, Side channel blower, ring blower, vacuum pump Itodpfxeb R Ubbo Anwsh -Drive: 0.75 kW -Feed rate: 130 m3 / h -Max. Compression pressure: 195 mbar -Speed: 2800 rpm -Number: 2x pumps available -Price per piece -Dimensions: 320/280 / H420 mm -Weight: 16 kg / piece

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 13/80 rpm -Power: 0.063/0.4 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake Itedpfockp S Tox Anwjh -Dimensions: 570/240/H200 mm -Weight piece: 37 kg

Condition: used, Gear motor, electric motor -Speed: 19 rpm -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: IP 33 -Height shaft axis: 200 mm -Dimensions: 530/250/H295 mm -Weight: 56 kg Itodpfx Aecnf E Sonweh

Condition: used, Extraction unit previously connected to a Kolbus three knife trimmer. Itsdpox Ah N Njfx Anweh

Condition: good (used), High pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial blower, high pressure blower -Manufacturer: Spelleken, high pressure blower type VRU-15-100-30H 1 -Drive motor: Holder 3 kW -Speed: 1430 rpm -Volume output: 0.25 m³/s -Pressure pt: 49.5 mbar -Connection input: Ø 105 mm -Connection output: Ø 105 mm -Bolt circle: Ø 180 mm -Dimensions: 900/510/H910 mm -Weight: 81 kg Iedpfx Ansgyb D Uoweth

Year of construction: 1999, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Reitz, Radialventilator -Type: MXE 100Engine power: 22 kW / 3000 rpm -Volume flow: 100 m³/min -Pressure increase: 1000 daPa -Connection input: Ø 275 mm -Connection: Ø 220 mm Iedpsvy Hu Ajfx Anwsth -Dimensions: 870/1220/H1210 mm -Weight: 370 kg

Condition: good (used), High pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial blower, high pressure blower, high pressure fan Iedpfxeun Du Sj Anwsth -Manufacturer: Combimac, high pressure blower type 54A641- /BJ1 -Drive motor: rotor 0.75 kW -Speed: 2840 rpm -Volume output: 2.1 m³/min -technical data: see photo type plate -Connection input: Ø 120 mm -Connection output: Ø 100 mm -Fan wheel: Ø 540 mm -Dimensions: 760/340/H840mm -Weight: 88 kg

Year of construction: 1972, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, radial fan pressure blower -Type: R08 800 -Engine power: 5.5 kW / 2880 rpm -Volume flow: 12 m³/min Ijdpjvcyw Nefx Anwjth -Connection input: Ø 140 mm -Connection output: Ø 75 mm -Protection class: -Dimensions: 1290/470/H1040 mm -Weight: 150 kg

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 20 rpm Ijdpechfcbjfx Anwoth -Power: 0.4 kW -Construction: B3 -Diameter shaft: Ø 38 mm -Protection class: IP 44 -Height shaft axis: 160 mm -Price: per piece -Number: 1x available -Dimensions: 500/250/H270 mm -Weight: 37 kg

Year of construction: 1996, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, double radial fan. -Type: 2 M 10 1800 -Engine power: 15 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 160 mm -Connection: Ø 100 mm -Protection class: IP 44 Itodpovam Hlefx Anweh -Dimensions: 900/1150/H1275 mm -Weight: 367 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Itodpjw S Ey Ejfx Anwjh Manufacturer: Mitsubishi, Freqol A024 frequency converter -Type: FR-A024-SO.4K-EC -Parameter Unit: FR-PU03E -Power: 0.4 kW -Input: 220-240 V 50/60 Hz -Output: 2.5A -Dimensions: 140/130/H150 mm -Weight: 1.7 kg

Condition: good (used), Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2" inch -Dimensions: 420/280/H340 mm -Weight: 20 kg Itodpfob A Rqyox Anwoh

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Rietschle, side channel vacuum pump side channel compressor -Type: SKG 245-2 -Drive: 1.1 kW -Speed: 2850 rpm -Flow rate: max. 170 m³/h -Compression pressure: 130 mbar -Number: 1x compressor available Itodpfjqddkgox Anweh -Price: per piece -Dimensions: 450/310/H370 mm -Weight: 27 kg

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Iodoudaazopfx Anwjth CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: good (used), Delta New Poluclean P30 dust extraction system Delta New Poluclean P30 Dust extraction system 400 V 5,5 kW 3500 m³/h 95 liters weight: 361 kg Ijdpfx Ansihfwpjwoth Dimensions: HxWxD = 300 x 100 x 97 cm More extraction units in other sizes - new and used - you will find in our store! International shipping costs on request!

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Ijdjhqd Tvspfx Anwsth Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Iodpfx Ansrhidmswoth Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Axial high-performance fan, Axial fan AEG Ijdpoxciw Ijfx Anwsth Wall-mounted fan for extraction or ventilation Type AG 80 NY6 No. 4268465 Airflow approx. 11,000 m³/h 6-blade fan Ø 600 mm Internal mounting frame Ø 645 mm External mounting frame Ø 900 mm Installation depth 190 mm Motor power 0.55 kW Power supply 400 Volt, 50 Hz - 6-bladed profiled impeller with bionic blade geometry - Fan blades made of aluminium - Fan housing made of metal with wall mounting ring (galvanized sheet metal) - Metal stand with protective guard, custom-built - Mobile Dimensions L x W / H: 1200 x 870 x 1520 mm Weight approx. 90 kg The high-performance fan is in very good condition.

Condition: used, Centrifugal fan KASTRUP Fabric No. 27688/1 Year of construction approx. 1985 Volume flow approx. 4000 m3/h Itedpfx Aedz Sqwenweh Intake pipe Ø 250 mm Exhaust air connection 400 x 120 mm Motor speed 1440 rpm Motor power 5.5 kW Mains connection 380 Volt, 50 Hz. - Metal housing Space requirement L x W x H 1100 x 900 x 1220 mm Weight approx. 150 kg Good condition

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Iodpsxcitvofx Anwjth Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition

Condition: used, Radial Fan REITZ Type: MAE Itodper H Sqyefx Anweh Serial No.: 601475 Year of manufacture: 2017 Airflow: 4,260 m³/h = 71 m³/min. Pressure p: 1.2 kg/m³ Air inlet: Ø 250 mm (connection diameter in the base plate) Air outlet: 245 x 195 mm Motor speed: 2,915 rpm Motor power: 7.5 kW Power supply: 400 Volt, 50 Hz - Impeller with 9 blades - Directly flange-mounted drive motor - Flange dimensions for air outlet: 310 x 260 mm - Robust metal housing made of 5 and 6 mm steel Space requirement (L x W x H): 1,390 x 1,030 x 600 mm Radial fan weight: 200 kg In excellent condition, only test run.

Condition: used, machine/vehicle number: 0940, without hall piping Itsdpfxorz Iq Hs Anwsh