Used Femia Manure Spreader for sale (562)

Condition: used, Electric tank volume measurement Centrifugal pump 785 l/min Fresh water tank 600 l / High-performance pump system 600 Autom. Opti-Flow flow Self-priming pump / Independent wheel suspension with hydraulic height and axle adjustment LED / Working headlight Hyd Itedpfx Aouccr Denwjh

Condition: used, Year of construction: 2023, Spreading vane set TS30 right ISOBUS operator terminal AmaTron4 ArgusTwin for / ZA-TS WindControl for ZA-TS Hydro GPS-Switch basic for AmaTron4 SpreaderConnect / for ZA-TS Drive Hydro left with AutoTS Drive Hydro right with AutoTS / main disc left Isdpjt Nf Dqjfx Anwjth

Condition: used, Year of construction: 2014, Equipment: compressed air brake, Spray nozzle up to compartment Nozzle holder axis rigid / Iodpfxet A A Srj Anwjth

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Isdpfx Aneuhp Eheweth

Condition: used, Year of construction: 2024, ArgusTwin + WindControl Spreader Connect Hydro drive left and right with / AutoTS and FlowControl Profis Pro main screen left and right with AutoTS / Rolling and parking device s Tilt sensor EasyCheck mats, 16 pieces / Device control unit Itedpfx Ansrxr U Djwjh

Condition: used, Year of construction: 2003, for MB Unimog 3000 l capacity Isobus Without terminal 24 m working width / Isdpetrft Ssfx Anwoth

Condition: used, Year of construction: 2004, Quantron P Terminal 3000L hopper approx. 12000ha spread tarpaulin working width / 27m mud flap hyd. Drive Lighting / Itjdstgqfdopfx Anwjh

Condition: used, Year of construction: 1990, Hydraul. Folding to the front Electric control panel Hydraulic lift / PTO shaft / Ijdpfjuambdex Anwsth

Condition: used, Year of construction: 2011, 5 boom sections, 15m , induction bowl / HC 5500 Computer + Spray II flow control / rinse water tank single nozzle holder / / Itsdot Dx Urspfx Anwsh

Condition: reconditioned (used), Year of construction: 2007, Connection 220V, compressed air connection 6 bar, weight approx. 110 kg, mobile, dowel feed via vibratory feeder, automatic dowel length and diameter control, fully automatic electronic control system, rinsing-gluing-gluing+driving in, rotary switch for glue/water to rinse, glue residue indicator, stainless steel container for glue, stainless steel container for water, 1x gun for dowels with diameter 8 mm length 20-50 mm, operating instructions - Iedpfowrruqsx Anwjth

Condition: like new (used), length 296 cm width 150 cm height 59-99 cm Itjdpfx Anjygtgiswoh height adjustment possible

Condition: used, Year of construction: 2000, machine/vehicle number: 2855, SECOND-HAND GLUE SPREADER OSAMA MOD. S2R 1300 - CE - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. Iteder Iyf Tjpfx Anwjh This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - Volt. 380/50 - S/N 2855 - Year 2000

Condition: used, Year of construction: 2004, SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES - Working width 1300 mm - N. 2 rollers - Year 2004 Isdpfx Aomxkxusnwsth

Condition: used, Year of construction: 2008, machine/vehicle number: 21543, SECOND-HAND 2 ROLLERS GLUE SPREADER OSAMA S2R 1300 - CE RULES - Chiller (Heat conditioner) Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures Ijdpfx Ansr Ixy Ijwjth - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Automatic washer for rollers - N. 2 rollers - Volt. 400/50 - SN 21543 - Year 2008

Condition: used, Year of construction: 2000, machine/vehicle number: 2852, SECOND-HAND GLUE SPREADER OSAMA TYPE S2R1300 - 1300 MM. - CE RULES - Chiller (Heat conditioner) HITEMA ECA 010/CHP 3 Cooling system for vinyl glue, urea glue and polyurethane glue for rollers gluing machines with two and four rollers. This device is required to maintain the glue temperature between the rollers always constant, and to ensure the scheduled pressure time even with high temperatures - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. Iodst U Iupspfx Anwoth - Automatic washer for rollers - volt. 380/50 - sn 2852 - year 2000

Condition: used, Year of construction: 1999, machine/vehicle number: 4127, SECOND-HAND 4 ROLLERS GLUE SPREADER OSAMA S4RP-1300 - WORKING WIDTH CM. 130 WITH GLUE MIXER - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Working width 1300 mm - Automatic washer for rollers - N. 4 rollers - Volt. 380/50 - S/N 4127 Ijdpfx Aewr Dc Tonweth - Year 1999 - *m57

Condition: ready for operation (used), Year of construction: 1986, Ott Höfer 2-Roller Glue Application Machine ZLA 1300 Working width: 1300 mm Max. workpiece thickness: 80 mm Roller diameter: 165 mm Itedpfx Aoxqrdaonweh Both rollers are in good condition Feed speed: 18 m/min Drive power: 0.75 kW Working height: 800 mm Required space: 2000 x 750 x 1150 mm Weight: 500 kg

Condition: excellent (used), 753 USED Koenig grain spreader. The device is operational, after inspection. EXTERNAL DIMENSIONS (in cm): - width 70, - length 312, - height 144. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Isdpfxsr Eluwj Anwoth

Condition: new, GALEN Salt Spreader for truck 7m³ capacity of bunker. Stainless steel bunker structure. Speed adjustable chain conveyor. Foldable spreader unit with adjustable height and angle. Easily accessible 2400lt solution tanks, large solution filling pipe. High pressure hydraulic pump for drive system. Only 1 piece stock salt spreader and snow plow Iodpfx Anjrcbztjweth

Year of construction: 2021, condition: new, Layout: Spreader Selling price: € 5.250, US$ 5.528 Skid Steer salt and sand spreader is hydraulically powered by your skid steer loader and is designed to handle most dry, free flowing granular materials, including salt, sand, seed and fertilizer. Ideal for sidewalks, parking lots, driveways and roads. This unit is engineered with minimal moving parts to reduce maintenance costs. You will have the ability to scoop your material with your loader and not have to hand fill. There is a manual flow gate assembly to control the flow of light materials to the discharge assembly. Hydraulic hose and couplers are included in the price. For detailed information please contact us Iedjph Rmvspfx Anwjth

Year of construction: 2004, condition: excellent (used), Swiss type lathes MANURHIN K'MX overhauled with : – Spindle, counter spindle, geometry and changes of all non-conforming parts. Iedpfx Ajir Id Ujnwsth Rotating tool on: rear comb, front comb, end unit, radial and axial counter operation C-axis on: main spindle and counter spindle Rigid tapping on: main spindle and backworking spindle High-pressure Predispo Year of construction 2004 – approx. 22 000 h

Condition: new, Year of construction: 2023, The K’MX 920 CLEVER sliding headstock automatic lathe is designed for machining complex workpieces up to Ø 20 mm. The lathe is equipped as standard with two electrospindles with a maximum speed of 12.000 rpm each. With its nine axes, comb + turret on three axes and independent end unit, this machine is capable of having four tools in the material for an optimised cycle time. 9 linear axis 1 independent rack with 10 positions Itodpfxsk Dz Dis Anwsh Cross-section of outer tools 12 x 12 mm Turret number of stations 12

Year of construction: 1995, condition: excellent (used), Sliding headstock The machine is in very good condition Technical data in the last photo Itsdpfjgv U R Tox Anwoh

Condition: new, MANURHIN K'MX 620 is designed for the productive machining of workpieces consisting of bars with a maximum diameter of 20 mm. Iedsuqngqepfx Anweth The machine is equipped as standard with two electro-spindles with a maximum speed of 12,000 rpm and a rotating guide bush synchronised with the main spindle by means of pulleys and belts. Main features: - Max. bar material diameter 20 mm - 12,000 rpm on both spindles - Main spindle power 3.7/5.5 kW - Spindle travel 210 mm - Number of tools in the cut at the same time: 2 - Power of rotating tools: 2kW - Number of stations: 22, 9 of which can be motorised

Condition: new, Year of construction: 2024, -10 linear axes - Ultra-powerful clamping - Rework spindle and its dedicated 9-position carriage (X4) enable you to carry out complex operations in masked time. - Spindle capacity: 8000 rpm - Oil-cooled electro-spindle Itjdpfx Aeu Ik Tisnwjh - Latest-generation FANUC 31i numerical control - Compact cast-iron structure