Used Ferri F30/D for sale (46,905)

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Lrsdpfx Ajyxb Hcea Rer Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook High-gloss aluminum rims All-LED lighting, round rear headlights 2 x LED work lights SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Door cover DN500 Outlet at the rear center of the stainless steel casing RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Condition: new, maximum load weight: 32,965 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Buy, rent, or rent with a purchase option by arrangement! 30m³ D-Tec V2A Slurry Tanker Trailer / Rear-Steering Axle / Lift Axle / NEW VEHICLE ---- * Manufacturer: D-Tec * Model: SV 2006 * NEW VEHICLE * Gross weight: 39,000 kg * Unladen weight (manufacturer specification): 6,035 kg * Payload: 32,965 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes / traction assist * Suspension: air suspension with raising & lowering facility * Tires: 385/65 R22.5 on steel rims * Color: Chassis RAL 9005 black, tank body RAL 7015 grey * Volume: 30m³ / Ø 2.20 m / single chamber * Wabco EBS * Vogelsang rotary lobe pump * Max. flow rate: 6,000 L/min * Swivel outlet at the rear * 8" docking funnel on top, sealable with a manual gate valve * Filling and venting with pneumatic shut-off valve including safety for all air-operated valves * 1" ball valve on pump right side * 4" flushing pipe with two 2.5" free-fall outlets (1x at the front and 1x in the center of the tank) * Automatic pump shutdown * Pneumatic control box at rear left * 1x foldable dome cover * 5 m hose racks left and right (galvanized steel) * Fill level indicator front left * Operating temperature 0-60 degrees Celsius * Side access ladder left * Empty load supports * Single mudguards * Saddle height 1,180 mm * 24V lighting system Lredpfex Suxlsx Aa Rsr * 2x LED work lights at rear * 2x LED work lights left and right German trailer!! German documents!! NEW VEHICLE!! New vehicle! Buy, rent, or rent with a purchase option by arrangement! Note on potential errors in the listing: Despite careful preparation of the ad, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All details are provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Lrjdpfx Aaevllxdj Rjr Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: used, maximum load weight: 32,998 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 12/2026, loading space volume: 30 m³, Equipment: ABS, Stock no. 5337 For sale, for rent, or lease with purchase option upon agreement! ONLY approx. 68,000 km driven! Approx. 30m³ D-Tec slurry tanker semi-trailer with 6,000-liter Vogelsang pump / rear-steering axle ---- * Manufacturer: D-Tec * Model: VTT-01 * First registration: 02/2024 * Gross weight: 39,000 kg * Unladen weight (as per registration): 6,002 kg * Payload: 32,008 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes * Suspension: Air suspension with raising and lowering function * Tyres: 385/65 R 22.5 on steel rims * Colour: RAL 7016 * TÜV (roadworthiness certificate): valid until 12/2026 Lrjdpfjy Srbksx Aa Rjr * Volume: 30m³ / Ø 2.20m / single compartment * Vogelsang rotary lobe pump with soft start * Max. delivery rate: 6,000 L/min * 6" swinging outlet at rear * 8" pipework to the pump with gate valve * 8" * Free-fall to swinging arm in 8" with 8" gate valve * 8" docking funnel on top, lockable with air-operated gate valve * Filling and ventilation with air-operated lock incl. safeguarding for all pneumatic valves * 1" ball valve on the right at the pump * 4" flushing line with two 2.5" nozzles (1x front, 1x center of the tank, with pneumatic valve) * Automatic pump shutoff * Pneumatic control panel, rear left * 1x foldable dome cover * 5 m hose holders left and right (galvanised steel) * Liquid level indicator front left * Operating temperature: 0-60°C * Side access ladder left * Unladen support legs * Single mudguards * Sight glasses at rear (1x top, 1x bottom) * Fifth wheel height: 1.180 m * 24 Volt lighting system * 2x LED work lights at rear * 2x LED work lights left and right * 1st hand (one owner) For sale, for rent, or lease with purchase option upon agreement! German vehicle! German documents! Disclaimer for possible errors in the listing: Despite careful creation of this listing, errors may have occurred in the text or specifications. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: excellent (used), Year of construction: 2002, Weishaupt gas burner G7/1-D, with gas line Dungs DN 50 Design: ZMD-LN Ledpfx Aaoy Uvt Nj Rorr Output: 250-1550 kW Connection pressure: 15-500 mbar Year of manufacture: 2002

Condition: as good as new (ex-display), Year of construction: 2024, Machine dimensions: • (L x W x H) 9,350 mm x 2,800 mm x 2,300 mm, length including filter: 5,300 mm. Technical details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 6 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Standard equipment: • Control system: Siemens Sinumerik 840 D • Laser head: Precitec light Cutter F 125 Focus • Sheet support detection and measuring system • Positioning laser diode • Automatic sheet changer • Automatic nozzle cleaner • Central lubrication unit • Chip collection tray • Software: Lantek or Metalix CAD/CAM software with auto-nesting Ledpfx Aasd N Rfds Rerr • Remote control: remote maintenance Laser cutting options: • Pierceline (piercing settings) • Focusline • Plasmaline • Fastline • Flyline Options include: • Tower with 10 pallet spaces • Automatic chip conveyor • Integrated camera (part tracking, micro-joints) • Air dryer • Automatic nozzle changer • Camera inside

Condition: new, functionality: fully functional, Year of construction: 2024, laser power: 30 W, sheet thickness steel (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, The Durma HD-F 3015 Fiber laser cutting machine in 30 kW, presented by Durma Maschinen GmbH, is a top-class fiber laser cutting machine developed for maximum precision and efficiency in metal processing. As a direct manufacturer with locations in Münster and Staufenberg, Durma Maschinen GmbH stands for quality, reliability and outstanding customer service. Features: 30 kW / 80 mm mild steel 50 mm stainless steel Automatic nozzle centering Automatic nozzle changer with 26 stations Servo shuttle table Focal distance F300 mm Conveyor system Technical data: Power: 30 kW Maximum sheet size: 3,048 mm x 1,524 mm Maximum sheet weight: 200 kg/m² Z-axis stroke: 160 mm Maximum synchronous speed: 170 m/min Maximum synchronous acceleration: 2.8 G Positioning accuracy: +/- 0.02 mm Repeat accuracy: +/- 0.02 mm Product description of the Durma HD-F 3015 in 30 kW: Powerful and Efficient: equipped with a 30 kW fiber laser, the Durma HD-F 3015 offers outstanding cutting performance and precision for a wide range of materials, including steel, aluminum and copper. Lrsdjq Nl T Tspfx Aa Rer Spacious work area: With a work area of 3000 x 1500 mm, this machine is ideal for processing both large and small workpieces. Advanced CNC control: The user-friendly and precise control allows for easy handling and optimizes cutting paths to minimize material waste. Automatic nozzle changing system: This feature increases productivity and reduces downtime when changing cutting nozzles. Energy efficiency: The laser is characterized by high energy efficiency, resulting in lower operating costs. Robust design: The machine impresses with its durability and reliability, even under demanding working conditions. Safety: Comprehensive safety functions ensure safe operation. Versatility: Compatible with various laser cutting software solutions, it is suitable for a wide range of industries. Durma Maschinen GmbH - your reliable partner: As the manufacturer of the Durma HD-F 3015, we, Durma Maschinen GmbH, pride ourselves on our fast and efficient service and our extensive spare parts supply. With locations in Münster and Staufenberg, we guarantee 100% availability and fast response times to ensure that our customers always receive the support they need. Our commitment to quality and customer satisfaction makes us the ideal partner for all your fiber laser cutting needs. Interested in the Durma HD-F 3015 in 30 kW? Contact us for a no-obligation consultation or a customized quote. At Durma Maschinen GmbH, we will be happy to answer all your questions and find the best solution for your needs. We look forward to your inquiry!

Condition: as good as new (ex-display), Year of construction: 2024, laser power: 10,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, positioning speed: 5 m/min, repeat accuracy: 5 mm, overall weight: 12,000 kg, warranty duration: 12 months, working range: 3,050 mm, Equipment: safety light barrier, Manufacturer: DURMA Model: HD-F 3015 III Fiber Lsdsdx Naljpfx Aa Rorr Working area X-Y-Z: 3060x1530x160 mm Laser power: 10000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet thickness, mild steel: 30 mm Sheet thickness, stainless steel: 26 mm Sheet thickness, aluminum: 15 mm Sheet thickness, brass: 20 mm Sheet thickness, copper: 15 mm Sheet size: 3048x1524 mm Load capacity: 200 kg/m² Speeds, X-Y axes: 100 m/min Speeds, X-Y axes, simultaneous: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Footprint (L/W/H): approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet positioning and sheet size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power, speed, pressure) External CAD/CAM programming software with auto-nesting, optionally Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 10000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/scrap Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode and automatic sheet layer detection, measurement Automatic nozzle changer The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, Tube and Flat-Bed Laser 4 kW | Combination Unit HD-F 3015 BH Laser Combination Machine Machine Dimensions: • (L x W x H) 9,350 mm x 3,800 mm x 2,300 mm, length including filter 5,300 mm. Technical Details: • Max. sheet size: 3,048 x 1,524 mm • Max. sheet weight: 200 kg/m² • Laser power (IPG): 4 kW • Z-axis travel: 125 mm • Max. synchronous speed (X-Y): 141 m/min • Max. acceleration (X-Y): 10 m/s² • Positioning accuracy: ±0.05 mm • Repeatability: ±0.05 mm Cutting Range: • Steel: 20 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 12 mm • Brass: 10 mm • Copper: 6 mm Equipment: IPG 4000W fiber laser source (including cooler) Compact dust extraction (filter) for 4 kW Air conditioning unit in the control cabinet Flat-bed laser with automatic exchange table Laser cutting monitoring Automatic laser head positioning CE - exchange table with light curtain safety system Control system SIEMENS SINUMERIK 840D Auto-focusing Precitec Procutter cutting head F150 focus Flat-bed laser with exchange table (automatic pallet change system) Tube cutting device, side mounting, max. Ø400 mm Sheet metal inspection (automatic sheet metal position and size measurement system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface, parameter page (power, speed, pressure) Software: Lantek or Metalix CAD/CAM software with automatic nesting Lighting for the work area Multi-chamber extraction system Lsdpjfl T T Nefx Aa Rjrr Warning light Special laser cutting options Positioning laser diode Piercing line (piercing settings) Focus line Plasma line Fast line Fly line Training support for CAD/CAM programming Application training Remote maintenance, by connecting to the machine, at no additional cost

Condition: as good as new (ex-display), Year of construction: 2024, Manufacturer: DURMA Model: HD-F 3015 III Fiber Year of manufacture: 2024 Working area X-Y-Z: 3060x1530x160 mm Laser power: 4000 Watt IPG Control system: Siemens Sinumerik 840D Operating hours: 0 h Sheet metal thickness, mild steel: 20 mm Sheet metal thickness, stainless steel: 10 mm Sheet metal thickness, aluminum: 12 mm Lrjdpfx Ajd Sd Tnoa Rsr Sheet metal thickness, brass: 10 mm Sheet metal thickness, copper: 6 mm Sheet metal size: 3048x1524 mm Load capacity: 200 kg/m² Speeds, X-Y axes: 100 m/min Simultaneous speeds, X-Y axes: 280 m/min Positioning accuracy: +/- 0.05 mm Repeatability: +/- 0.05 mm Installation area L/W/H: approx. 14500x7500x2420 mm Weight: approx. 12000 kg Standard equipment Automatic pallet changer Sinumerik 840D control system Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet metal position and size measuring system Automatic nozzle cleaning Positioning laser diode Central lubrication Simple user interface, parameter page (power-speed-pressure) External CAD/CAM programming software with Autonesting, optional Lantek software Work area lighting Warning light Multi-chamber extraction system Special laser cutting options Remote maintenance CE marking Extended equipment IPG fiber laser source 4000 Watt including cooler Filter, compact dust collection system Vanterm Motorized chip conveyor for small parts/waste Laser service set Cloud license Lantek Expert Inside software Lantek software with positioning laser diode with automatic sheet detection and measurement Automatic nozzle changer Camera Inside The machine can be inspected and demonstrated at our showroom in Staufenberg at any time by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights Lrodoy Sqrbspfx Aa Ror * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2026, total width: 2,470 mm, total height: 1,350 mm, suspension: air, tire size: 385/65R22.5, color: black, Year of construction: 2026, Axle configuration Tyre size: 385/65R22.5 Make axles: VALX Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.855 kg Carrying capacity: 39.145 kg GVW: 44.000 kg Maintenance APK (MOT): tested until 04/2027 Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Registration number: OX-80-FD Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes Lredpfx Aaey Ec A Eo Ror - EBS - Extandable - Lift axle - Twist-locks

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 8,000 h, machine/vehicle number: 8259211467, control type: CNC control, degree of automation: automatic, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS6000U, laser hours: 8,000 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 400 mm, pipe length (max.): 6,000 mm, table length: 3,060 mm, table width: 1,530 mm, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, positioning speed: 140 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 4 kW (5.44 HP), input voltage: 380 V, total length: 12,635 mm, total width: 7,905 mm, total height: 2,277 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, - Cutting head: Precitec Procutter 2.0 F150 TUBE CUTTING FUNCTION - Max diameter of tube to be cut (D): 30 - 400 mm - Max square tube: 250 x 250 mm - Cutting range of profiles (length): 3000 mm - Max length of tube to be cut: a) Round tube Dmax = 115 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) b) Square tube 30 x 40 up to 80 x 80 mm, max length is 6000 mm (possible to feed manually through the opening in the chuck) c) For larger tubes and profiles, max length is 3000 mm - Positioning accuracy of tube/profile cutting: +/- 0.5 mm per 1000 mm. This value is given for the first 1000 mm. Further accuracy depends on the straightness and precision of the tube/profile. CNC and Software coming with the machine: - CNC control: SIEMENS SINUMERIK 840D - LANTEK Expert Cut-Plus: 1 license (recommended to update) - 2D file import. Dwg and dxf - CSV file import (Lantek format and data must be followed)Warehouse module shows sheet residues and stock levelsPlugin for SolidWorks and Solid Edge - LANTEK Flex3d TUBES: 1 license (recommended to update) - 3D importCSV file import (Lantek format and data must be followed) OTHER OPTIONS Lrodsy Naypspfx Aa Rjr - Automatic nozzle cleaning and calibration - Exhaust gas filter - Central lubrication - Motorized scrap conveyor under the working table - Work zone lighting - Remote management for factory technical support machine is available for immediate delivery. The buyer has the right to ask questions and come over to check the machine. Later claims will not be considered. Dismantling of the machine, packaging for transport, loading into a container/truck - not included in the machine price.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 07/2017, total width: 2,470 mm, total height: 1,540 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2017, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Rear axle 4: Max. axle load: 9000 kg Weights Empty weight: 6.358 kg Lrodpfx Aoy Dcbfea Ror Carrying capacity: 37.642 kg GVW: 44.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OV-84-VK = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks

Condition: used, functionality: fully functional, machine/vehicle number: 2482508, Year of construction: 2019, load capacity: 3,000 kg, lifting height: 6,000 mm, free lift: 135 mm, load center: 500 mm, fuel type: diesel, power: 41 kW (55.74 HP), motor manufacturer: Toyota, fork carriage width: 1,070 mm, fork length: 1,000 mm, fork width: 100 mm, fork thickness: 45 mm, turning radius (outer): 2,430 mm, front tire size: 28x9-15, rear tire size: 6.50-10, overall weight: 4,270 kg, total height: 2,170 mm, total length: 3,800 mm, total width: 1,240 mm, color: red, Equipment: cabin, pallet forks, Technical data Year of manufacture: 2019 Drive: Diesel Engine output: 41 kW Load capacity: 3,000 kg Load center: 500 mm Own weight: 4,270 kg Lifting height: 6.00 m Overall length: 3.80 m Overall width: 1.24 m Overall height: 2.17 m Fork dimensions (L x W x H): 1.00 m x 0.10 m x 0.045 m Front tire size: 28x9-15 Rear tire size: 6.50-10 Travel speed: 18.0 km/h Max. gradeability: 24% Fully operational Lrodpfsyqzbpjx Aa Rjr General signs of wear Delivery optional Rental optional

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 03/2013, total width: 2,470 mm, total height: 1,520 mm, color: black, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS - Lift axle - Air suspension - Disc brakes = Remarks = Nice 2013 D-TEC FLEXITRAILER 45FT High Cube swap body chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle = lift axle, extendable in 2 positions (middle and rear) + fixed front, suitable for 1x20FT, 2x20FT, 1x20FT middle, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg; Gross vehicle weight: 43,000 kg; tyres: 385/65-R22.5 (R: 6/4/4 mm; R: 6/6/5 mm). Dutch registration with valid MOT (APK) until 26.10.2026. 2 units available. = Further information = Lrodsx T Di Nspfx Aa Ror Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 5,070 kg Payload: 37,930 kg Gross vehicle weight: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Maintenance, history and condition MOT (Technical inspection): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Registration number: OX-40-BN Further information Contact Arne Honingh for more information.

Condition: used, Duplo Ultra 300A UV Coater with SF-300 Feeder Removed from closed printshop. Was in full working order when disconnected. Would recommend machine benefit from a service. Sold Ex works. Any questions or need more photos please ask. Machine is in stock. Spec The Duplo Ultra 300A UV Coater is a high-speed, heavy-duty flood coating system designed for offline finishing of offset and digitally-printed materials. It standardly includes the high-capacity SF-300 Suction Feeder to handle production-level volumes. Core Technical Specifications The system is engineered to match the speed of modern digital presses while maintaining high-quality finishes. Maximum Speed: Up to 148 feet (45 metres) per minute. Maximum Paper Size: 20” x 28” (508 mm x 712 mm). Minimum Paper Size: 8.5” x 11” (215 mm x 280 mm). Paper Weight: 200 to 350 gsm. Lrsdpfxoymgume Aa Ror Coating Types: Applies High Gloss, Satin, or Matte finishes. SF-300 Suction Feeder Specifications The SF-300 Suction Feeder is the standard feeding unit for the offline "A" model. Feeder Capacity: 7.5-inch pile height or approximately 90 lbs of paper. Feeding Mechanism: Top-feeding air suction belt designed for difficult or heavy stocks. Detection: Built-in double sheet detector to prevent jams and coating errors. Weight: The feeder itself weighs approximately 305 lbs

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2011 servo envelope inserting system available. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Other feeders and camera's optional possible! Year of built: 2011 Configuration: - 6 station base - 4x RF2 rotary feeder - 2x HF vacuum friction feeder - Divert bin 1 - On-edge conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: Lrsdpfxowml S Es Aa Rer - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good = Additional options and accessories = - ADR - Air suspension - Disc brakes - EBS - Lift axle Lrsdpfx Aaoxu Ddgj Rer

Condition: refurbished (used), Year of construction: 2007, Looking to expand your existing Buhrs ITM (Winkler+Dunnebier) W+D envelope inserter with more feeders? We have all Buhrs ITM feeders available! The Buhrs / Winkler and Dunnebier AT25rotary and HF3 friction feeder are developed to be installed on the Buhrs-ITM BB300 envelope inserting systems The Buhrs / Winkler and Dunnebier HF2 friction and the RF2 vacuum rotary feeder are developed for the Buhrs-ITM BB600 and the Buhrs BB700 envelope inserting systems. The Buhrs RF2 vacuum rotary feeder can be retrofitted on most BB600 and all BB700 LL envelope inserting systems in the market The RF2 vacuum rotary will seperate the material with three suction cups and has bottom fed. This feeder is capable to feed material with high speeds. We have the following feeders available! AT25 Vakuum rotary feeder (BB300) AS25 Shuttle feeder (BB300) HF3 vakuum friction feeder (BB300) Ljdpfx Ajq Ec Rgoa Rsrr RF2 Servo vacuum rotary feeder (BB600 and BB700) AS2 Shuttle feeder (BB600 and BB700) HF2 Vacuum friction feeder (BB600 and BB700) All feeders we offer for sale are completely checked and tested. All parts which need to be replaced are new. We have multiple of the Buhrs ITM / Winkler & Dunnebier feeders available. Contact us for a quote.

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder Lrodpsq Eg Hnsfx Aa Ror - 70 gsm 14,000 cycles per hour

Condition: refurbished (used), Year of construction: 2008, We have a Buhrs - W+D BB700 14K servo envelope inserting system available. The condition of this machine is very good and has BSC 3.0 software installed. BSC 3.0 is the latest software platform which manufacturer W+D has to offer. Other feeders and camera's optional possible! Year of built: 2008 Configuration: - 6 station base - 4x RF2 rotary feeder - 1x HF2 vacuum friction feeder - Divert bin - Autoloader envelope station - Conveyor Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm Ljdpfjq Eg Iajx Aa Rerr 14,000 cycles per hour

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We have a Buhrs - W+D BB700 16K S1 year 2015 servo envelope inserting system available. 12 station base system!!!!! More pictures will follow soon. The condition of this machine is very good and the machine has always received its mandetory maintenance. The machine is prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. The Mueller and/or KERN system channel can be offered in or excluded at the machine. We can even offer the Mueller channel as a continues system with a Mueller unwinder, paper cutter, merger and folding station. Lrjdpfexyfmgjx Aa Ror Other feeders and camera's optional possible! Year of built: 2015 Configuration: - 12 station base - 11x RF2 rotary feeder (other feeders possible) - Divert bin 1, 2 - Conveyor Prepared for a Mueller and/or KERN transactional channel for feeder/collating/folding A4 documents. Envelope formats: - min. 105 × 162 mm C6/DL - max. 250 × 353 mm B4 Product formats: - min. 80 × 105 mm A6 - max. 229 × 324 mm C4 Product thickness: - 3 mm for rotary feeder - 10 mm for shuttle feeder - 15 mm for vacuum/friction feeder - 70 gsm 16,000 cycles per hour

Condition: new, color: yellow, Working width: 12.500 cm Ljdpfsx I Hgysx Aa Rorr

Condition: new, input voltage: 400 V, - EXCELLENT QUALITY FROM EUROPEAN SOURCES - STAINLESS STEEL SPIRAL - STAINLESS STEEL TUB - WITH PROGRAMMABLE DIGITAL CONTROL FOR BOTH SPEEDS - ALSO WITH MANUAL BUTTON ON DISPLAY - CAN ALSO ROTATE IN REVERSE DIRECTION - TUB CAN BE ROTATED SEPARATELY - AFFORDABLE PRICE FOR GREAT QUALITY Lrsdsx At Htjpfx Aa Rjr