Used Fliegl Sds 380 Vario Kipp 30/40 for sale (47,374)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Todpfx Ahsi Ri Hcsmoc Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, low-bed semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for timber planks in the center of the loading area Timber planks 70 mm for widening to 3,000 mm Tie-down points, low-bed 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down mushroom heads, recessed at the top and side in the outer frame, each 10 tons 2 x on the gooseneck 9 x distributed in the low-bed area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 8 pairs of beam pockets recessed in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5 ton ring tie-down points) Axles + Suspension SAF drum brake axles Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Color-coded line routing for easy service. Spring parking brake EBS, electronic brake system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with lift and lower valve Axle load recognition via EBS-CAN bus signal, for display on the instrument panel in the cab Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 1 LED rotating beacon with holder 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box recessed in the ramp to the gooseneck followed by 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Todji Ri E Rjpfx Ahmec Rear slope with 70 mm softwood floor Low-bed area including rear slope 9,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with SVK socket NW 10/3, without connecting hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Todpfjzd Eynjx Ahmoc Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: good (used), Separating tool, punching tool, punch, punch die, punch stamp, wiper, wiper plate -Scrapers: Scraper plate for punching tool, 4 pieces -Size: 10/15/30/40 mm -Dimensions: see photos Tsdpeznafysfx Ahmec -Submission/Price: complete -Transport dimensions: 150/110/H60 mm -Weight: 6.1 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 22,100 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Tsdozl Uv Uspfx Ahmoc Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Heavy-duty welded steel low-loader turntable trailer with robust ball-bearing turntable. Folding rear support. Aluminium side underrun protection. Full-width rear mud flap. Quarter mudguards in front of the 1st axle. Extendable loading platform up to 3,000 mm. Integrated storage compartment for timber extension beams. 70 mm timber extension planks included. Two pairs of recessed wheel wells: Front wheel wells behind the gooseneck, approx. 1,600 mm long and 400 mm deep. Rear wheel wells between the axles, approx. 600 mm long and 300 mm deep. Removable steel covers for wheel wells. Main frame spacing approx. 1,280 mm in wheel well area. Lashing Equipment 1 pair of 10 t lashing cut-outs in the gooseneck 4 pairs of 5 t lashing holes in the outer gooseneck frame 7 pairs of recessed 10 t lashing mushrooms Lashing point spacing max. 1,100 mm Recessed stake pockets (70 × 40 mm), convertible to 5 t lashing rings Additional 10 t folding lashing rings on the gooseneck and rear beavertail Drawbar Height-adjustable drawbar with certified 40 mm towing eye. Axles & Suspension SAF drum brake axles Laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption Air suspension with raise/lower valve Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver Braking System Dual-line air brake system Spring parking brake Electronic Stability Program (ESP) Axle load indication via EBS CAN bus Front air couplings with connecting lines Parking sockets for ABS/EBS and air connections 24 V EBS with front connector Trailer Info Module displaying axle loads, mileage and diagnostic data Electrical System 24 V full LED lighting LED side marker lights LED number plate light LED front position lights LED rear outline marker lights Parking sockets for electrical connections Extendable illuminated LED warning boards up to 3,000 mm Loading Platform Steel chequer plate on gooseneck Integrated storage box in transition area Approx. 70 mm timber floor Steel chequer plate over wheel wells Rear beavertail with 70 mm timber decking Total low-bed deck length incl. beavertail: 6,500 mm Loading Ramps Hydraulic steel loading ramps Length: 3,000 mm Width: 750 mm Side-adjustable Foldable lower ramp locking system Mega Grip serrated grating surface with chequer plate ramp tips Hydraulic operation via tractor PTO with flow restrictor Hydraulic connection with SVK coupling (NW 10/3)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,000 kg, maximum load weight: 27,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,480 mm, loading space height: 3,040 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis Steel welded construction with narrow crossmember spacing and reinforced design, low-loader outer frame profile, for transporting construction machinery up to 32,000 kg and with a maximum outer width of the construction machinery of 2550 mm, kingpin plate with replaceable 2 kingpins. Rear slope of approx. 1200 mm and 7°. Ramp shaft closed at the top with steel/diamond plate, in the low-bed, omega rail laterally at the bottom on the outer frame as a mounting rail for tarpaulin and spacers for lashing points, not in the wheel area. If a lift table is used, there is an additional, lightweight outer frame with an omega profile. 24-ton, 2-speed landing gear, single-sided operation, with a semi-circular lower part and a straight connection plate, with stroke compensation, free swivel radius to the rear approx.: 1950 mm, rear support, foldable 2 wheel chocks + holder Side underrun protection, aluminum Quarter panel fenders in front of and behind each axle with anti-splash flaps behind each axle Underrun protection, steel Splash flap at the rear over the entire width 4 storage boxes, stainless steel, w=800/h=350/d=350 mm, with a polished, lockable door, 2 x on the left front and 2 x on the right front in front of the 1st axle Lift table behind the gooseneck, approx. 3000 mm long, hydraulically liftable for crossing over the gooseneck, with mechanical locking in the raised position. (Cylinder angled for good ground clearance, Fliegl standard). Operation on the right front + additional activation with a wireless remote control, lift table can be raised with the tarpaulin closed! Tarpaulin attachment in the lift table area to an additional, lightweight outer frame with omega profile, lift table can be raised with the tarpaulin closed! Lashing points can also be used in the lowered position! Lashing points Gooseneck: 4 pairs of 5-ton lashing points embedded in the outer frame 2 pairs of lashing points at the top and on the side embedded in the outer frame 8 pairs of lashing points at the top and on the side embedded in the outer frame, each 10 tons 9 pairs of 5-ton lashing points embedded in the outer frame Axles + Suspension SAF drum brake axles last axle with trailing steering knuckle, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension with lifting and lowering valve + auto-reset function H&S function with quick vent 1st axle, automatic lift axle, incl. forced lowering and starting assist, activated by pressing the brake pedal 3 times (starting assist is functional up to an axle load exceedance of 30% and a speed of max. 25 km/h) Axle lift below the recommended ride height, no guarantee for tire damage Wheels and tires 235/75R17.5 from leading manufacturers Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system Spring brake parking brake Todpfx Asi Riw Aohmjc 2 foolproof coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Axle load recognition in the truck via EBS, without installation in the truck. Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Tjdpfx Aji Riy Tohmec Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co

Condition: used, mileage: 135,000 km, power: 287 kW (390.21 HP), first registration: 10/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: automatic, loading space length: 5,400 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2014, Equipment: ABS, crane, had accident, RENAULT C 380 TIPPER 5,40 m + CRANE Imported / Damaged ? YEAR OF PRODUCTION: 2014 ? MILAGE: 135 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL MIRRORS Tjdordufyjpfx Ahmoc ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH TIPPER: 540 x 248 x 60 cm (L x W x H) CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 430/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: AIR CRANE: PALFINGER PK 16001 K - B TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: like new (used), Year of construction: 1992, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis  X axis traverse: 4000 mmY axis traverse: 1200 mmZ axis traverse: 1250 mmVertical capacity (VC): 57 – 1307 mm Milling head Head type: Universal manual U22Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 2080)  /  Pull stud: DIN 69872Speed range: 20 - 2000 rpmSpindle power: 22 kW Feedrates Feedrate: 5 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 23500 kgMachine dimensions approx.: 11100 x 5392 x 3400 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fence.Electronic handwheel: New HR-510Coolant: External Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Tedpfx Ahsyf Rtkemec

Condition: new, WEG W22 Premium 22 KW02P180M -380 - 415/660//440-460 V 50 Hz 3-phase electric motor, unused in original packaging, 100% functional. Scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Todpfx Asx Dwibohmsc

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2014, loading space length: 8,700 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,300 mm,

Condition: used, Gear motor, electric motor, electric gear motor -Speed: 378 rpm -Power: 0.75 kW -Hollow shaft: Ø 19 x 79 mm -Construction: B14 angle -Protection class: IP55 -Dimensions: 330/130/H200 mm -Weight: 9 kg Tedpfxjfh N D No Ahmjc

Year of construction: 1994, condition: reconditioned (used), Brick weight: 250g. Dimensions of the brick are: 100 x 75 x 35 [mm] (length x width x height). Capacity is up to 75 bricks per minute. The machine was fully reconditioned. Taken apart and assembled back with all used parts reconditioned or changed. It is equipped with an inverter on the main drive (smooth speed adjustment), aluminium hopper (stainless steel hopper also available) and paper centring mechanism (layout of the paper is centred on the brick). Tedpfx Ahjfm T A Ijmec If It is possible to fit a different format on the machine from 50g to 500g.

Condition: good (used), Year of construction: 2005, Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3.000 /-40/+130 Temp. Range: -40°C to +130°C Tjdpfx Ahouuibkjmec Program Controller: Stange SE - 502 Line Voltage: 400 V Rated Current: 32 A Refrigerant: R 404 A / R 23 Year of Manufacture: 2005 External Dimensions: W 1600 x D 800 x H 2430 mm TK-16 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV/ 030 -Speed speeds: 45 rpm i= 30 -Engine manufacturer: DRdrives Type 63A-4 -Power: 0.12 kW / 1360 rpm Tsdpfx Ahjvpgcrjmjc -Hollow shaft: Ø 14 x 63 mm -Number: 1x gear motor available -Dimensions: 290/150/H140 mm -Weight: 5.4 kg

Condition: new, Year of construction: 2022, Interroll angled-belt conveyor 30° 1525-950-840 RA2327 new Make: Interroll Year of manufacture: 2022 Inlet angle: 30 Length: 800mm shortest length at angle starting, total length 2250 mm Belt width (RB): 840 mm ( 90 mm each ) Frame height: 160 mm Nominal/external width (NB): 950 mm, 1250 with motor average conveying speed: 0,76 m/s, with frequency converter stepples controllable Motor drive: Sew Movi Mot V 230/400, kW 0,75 Overall height side wall: 150 mm Optionally available: Supports All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. Tsdpfx Ajvg Nd Tshmoc With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, belt pulley, timing belt pulley -Manufacturer: Desch, timing belt pulley Ø 255 mm - Pitch: 14 mm / Belt width 55 mm -Receipt: Ø 40 x 50 mm taper bushing Desch 3020-40 -Dimensions: Ø 255 x 70 mm -Weight: 16.3 kg Tedpfx Ahopid Dgemoc

Condition: good (used), PLC control, central module, memory, CPU, central device, central unit, compact device -Manufacturer: Siemens, compact unit Simodrive Tjdpfx Asmrw U Aehmsc -Type: D380/30 Mreg-GdG6V55-3A 6 RA 2718-6DV55-0AA0 -Quantity: 1 piece available -Dimensions: 270/170/H290 mm -Weight: 7.3 kg

Condition: new, Indramat TRK6-4U-380 / 100-G1 / 551 Pulse-thyroid control amplifier SN:219444-004991, unused, 100% functional, scope of delivery as per photos Tjdpfxjtyr A Ae Ahmec

Condition: new, empty load weight: 129 kg, maximum load weight: 621 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Garden Trailer 230 KIPP trailer with additional drop sides, support wheel and flat tarpaulin The Garden Trailer 230 KIPP car trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 7 to 9 working days. After receiving the car trailer, you only need to register it Advantages of a Garden Trailer 230 KIPP car trailer If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. Todpfxjt Id Ifj Ahmsc You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want!

Condition: good (used), Tool holder, reamer, tool holder, machine reamers, reamer, reaming tool, dowel cutter set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, tool holder Tedpfx Asucag Sjhmoc -Manufacturer: Kämpf, Mounting bracket type: MK5, 5 pieces -Type: A40 TGL 30-1226 2 pieces -Type: Ø 33 mm 3 pieces -Price/Fee: complete -Transport dimensions: 460/300/H63 mm -Weight: 23.5 kg

Condition: used, Year of construction: 2024, _____Vario XM 300 DIN basic equipment: two shares mounted on the frame with king pins, collision protection via deflection flaps, guided via parallel link, collision-proof central pin (tip), hydraulic swivel device left-right, hydraulic installation with 6 (or 4 for the three-point) quick hydraulic couplings in accordance with DN10-ISO 7241-1A and 1 pressureless return connection, curb deflector left-right, municipal attachment plate in accordance with EN15432-1:2011 F1, F1/C or F2 (formerly DIN 76 060, size 3 or size 5) with lifting system for tension-free lifting and lowering, lifting system with upper torsion spring fork for optimal road adaptation (vertical and horizontal parallel guidance), pressure relief valve, cylinder in strong design, double-acting, pendulum compensation up to 14°, additional springs for lateral inclination with the pendulum system, adjustable skids, warning flags with holder, adjustable LED lighting Distance block for stop angle 45° Parking foot Municipal paint RAL 2011 Damping rail PU Steel scraper barEquipment subject to additional charge:Switchover valveRubber deflectorAlso available with three-point attachment!From 16,145.00 _ (net)The picture is an example and can contain special equipment.,Storage location:null Tsdpfxeu Ebkye Ahmjc

Condition: ready for operation (used), AEG Minisemi 380/50 + GK + NCA 029.037 140, used, normal signs of wear, 100% functional. Tsdji D Tuxepfx Ahmjc

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 430 mm, area performance: 2,000 m²/h, warranty duration: 24 months, tank capacity: 40 l, water tank capacity: 40 l, rotational speed (min.): 180 rpm, brushing unit diameter: 430 mm, We offer for sale a hand-guided scrubber dryer B 40 C Ep 230V. Condition: Perfect - the machine is brand new Year of manufacture: 2024 Tjdpfx Ahjx Auu Eomoc The mains-powered, hand-propelled B 40 C Ep scrubber dryer can be optionally equipped with a roller brush head featuring parallel cylindrical brushes and sweeping functionality, or with a disc brush head. It is ideally suited for easy, safe, and convenient operation. Four different squeegee blades are available. The scrubber dryer can also be fitted with a range of other useful optional features, such as the Home Base "Mop" or "Box" kits for better transport of additional tools. Innovative Kärcher accessories such as brushes in various hardnesses, different squeegee blades, pad driver plates/roller pad shafts, and pads make this scrubber dryer suitable for a wide variety of cleaning tasks. Technical Data Brush working width (mm): 430 Vacuum working width (mm): 850 Fresh/dirty water tank (l): 40 / 40 Power supply voltage (V/Hz): 230–240 / 50 Rated power (W): up to 1300 Weight without accessories (kg): 66 Dimensions (L x W x H) (mm): 1212 x 520 x 1142 Features and Benefits EASY Operation switch Intuitive operation. Essential functions are easily controlled using the EASY switch. Straight or curved squeegee For perfect suction on every floor type. A variety of suction lips are available: made from natural rubber or oil-resistant polyurethane, slotted lips for delicate floors, or closed lips for rough floors. Mains operation Uninterrupted work. Low weight due to mains operation – ideal for pressure-sensitive floors. Practical device design The slim unit is easy to maneuver in confined spaces. The asymmetric shape ensures the best possible visibility of the cleaning area.

Condition: excellent (used), Weiss Temperature Chamber Here we offer a Weiss temperature chamber. Converted to R452a Weiss Temperature Chamber, Air-Cooled Tjdpfjzd Rw Sex Ahmjc Temperature range: from -30°C to 180°C Temperature change rate, cooling: 1.6 K/min Temperature change rate, heating: 2.1 K/min Test chamber dimensions: width 550 mm x depth 750 mm x height 800 mm Housing dimensions: width 800 mm x depth 1500 mm x height 1800 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW, rated current: 9 A Refrigerant: R452a Weight: 515 kg Type: WT1-340/30 For your safety as a buyer, please note the following information: The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.